Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

Mechanistic Insight into Energy-Transfer Dynamics and Color Tunability of Na4CaSi3O9:Tb3+,Eu3+ for Warm White LEDs

In this work, a latent energy-transfer process in traditional Eu³⁺,Tb³⁺-doped phosphors is proposed and a new class of Eu³⁺,Tb³⁺-doped Na₄CaSi₃O₉ (NCSO) phosphors is presented which is enabled by luminescence decay dynamics that optimize the electron-transfer energy process. Relative to other Eu³⁺,Tb³⁺-doped phosphors, the as-synthesized Eu³⁺,Tb³⁺-doped NCSO phosphors show improved large-scale tunable emission color from green to red upon UV excitation, controlled by the Tb³⁺/Eu³⁺ doping ratio. Detailed spectroscopic measurements in the vacuum ultraviolet (VUV)/UV/Vis region were used to determine the Eu³⁺–O²⁻ charge-transfer energy, 4f–5d transition energies, and the energies of 4f excited multiplets of Eu³⁺ and Tb³⁺ with different 4f^N electronic configurations. The Tb³⁺→Eu³⁺ energy-transfer pathway in the co-doped sample was systematically investigated, by employing luminescence decay dynamics analysis to elucidate the relevant energy-transfer mechanism in combination with the appropriate model simulation. To demonstrate their application potential, a prototype white-light-emitting diode (WLED) device was successfully fabricated by using the yellow luminescence NCSO:0.03Tb³⁺, 0.05Eu³⁺ phosphor with high thermal stability and a BaMgAl₁₀O₁₇:Eu²⁺ phosphor in combination with a near-UV chip. These findings open up a new avenue to realize and develop multifunctional high-performance phosphors by manipulating the energy-transfer process for practical applications.     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

Microwave synthesis and photoluminescent properties of Sr2CeO4/Ln3+ (Ln = Er, Ho, Tm)

Sr₂CeO₄/Ln³⁺ (Ln = Er, Ho, Tm) phosphors were synthesized with the microwave radiation method for the first time. The luminescent properties of the samples were investigated and the up-conversion luminescence of Er³⁺, Ho³⁺ and Tm³⁺ doped Sr₂CeO₄ phosphors was observed. The spectra indicate that the energy transfer takes place from the triplet excited state of MLCT (metal-to-ligand charge transfer) state for Sr₂CeO₄ (sensitizer) to the rare earth ions (activator). __________ Translated from Journal of Hebei Normal University (Natural Science Edition), 2007, 31(2): 212–216 [译自: 河北师范大学学报 (自然科学版)]     

Host-sensitized luminescence of Dy, Pr, Tb in polycrystalline CaIn2O4 for field emission displays

CaIn₂O₄:Dy³⁺/Pr³⁺/Tb³⁺ blue-white/green/green phosphors were prepared by the Pechini sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), diffuse reflectance, photoluminescence (PL) and cathodoluminescence (CL) spectra as well as lifetimes were utilized to characterize the samples. The XRD results reveal that the samples begin to crystallize at 800 °C and pure CaIn₂O₄ phase can be obtained after annealing at 900 °C. The FE-SEM images indicate that the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ samples consist of spherical grains with size around 200-400 nm. Under the excitation of ultraviolet light and low-voltage electron beams (1-5 kV), the CaIn₂O₄:Dy³⁺, CaIn₂O₄:Pr³⁺ and CaIn₂O₄:Tb³⁺ phosphors show the characteristic emissions of Dy³⁺ (⁴F_9/2-⁶H_15/2 and ⁴F_9/2-⁶H_13/2 transitions, blue-white), Pr³⁺ (³P₀-³H₄, ¹D₂-³H₄ and ³P₁-³H₅ transitions, green) and Tb³⁺ (⁵D₄-⁷F_6,5,4,3 transitions, green), respectively. All the luminescence is resulted from an efficient energy transfer from the CaIn₂O₄ host lattice to the doped Dy³⁺, Pr³⁺ and Tb³⁺ ions, and the corresponding luminescence mechanisms have been proposed.     

High-pressure synthesis and structures of lanthanide germanides of LnGe5 (Ln=Ce, Pr, Nd, and Sm) isotypic with LaGe5

A series of lanthanide penta-germanides LnGe₅ (Ln=Ce, Pr, Nd and Sm) has been prepared by high-pressure (5–13 GPa) and high-temperature (500–1200 °C) reaction. CeGe₅ crystallizes in an orthorhombic unit cell (S.G. Immm (71)) with a=4.000(5) Å, b=6.192(5) Å, c=9.86(1) Å, and V=244.1(5) Å³. The new germanides are isotypic with LaGe₅ consisting of a Ge covalent network with tunnels where guest ions Ln³⁺ are situated. The network is composed of sublayers with edge-sharing Ge six-membered rings with only boat conformation. The sublayers are connected by rare eight-coordinated Ge atoms. The cell volume of the compounds systematically decreases from La to Sm compounds, except for CeGe_5, owing to the lanthanide contraction. The lattice constants of CeGe₅ are smaller than those of the Pr compound because it contains Ce⁴⁺ ions. CeGe₅ is paramagnetic above 2 K, but does not obey the Curie–Weiss law. PrGe₅ and NdGe₅ are Curie–Weiss type paramagnets with Weiss temperatures of –3.3 and –18.4 K. SmGe₅ shows an antiferromagnetic transition at 10.4 K.     

Synthesis and photoluminescence properties of the high-brightness Eu-doped M2Gd4(MoO4)7 (M=Li, Na) red phosphors

A series of red-emitting phosphors Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) have been successfully synthesized at 850 °C by solid state reaction. The excitation spectra of the two phosphors reveal two strong excitation bands at 396 nm and 466 nm, respectively, which match well with the two popular emissions from near-UV and blue light-emitting diode chips. The intensity of the emission from ⁵D₀ to ⁷F₂ of M₂(Gd_1−xEu_x)₄(MoO₄)₇ phosphors with the optimal compositions of x=0.85 for Li or x=0.70 for Na is about five times higher than that of Y₂O₃:Eu³⁺. The quantum efficiencies of the entitled phosphors excited under 396 nm and 466 nm are also investigated and compared with commercial phosphors Sr₂Si₅N₈:Eu²⁺ and Y₃A₅O₁₂:Ce³⁺. The experimental results indicate that the Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) phosphors are promising red-emitting phosphors pumped by near-UV and blue light.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

Synthesis and characterization of monodisperse spherical SiO2@RE2O3 (RE=rare earth elements) and SiO2@Gd2O3:Ln (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles with core-shell structure

Spherical SiO₂ particles have been coated with rare earth oxide layers by a Pechini sol-gel process, leading to the formation of core-shell structured SiO₂@RE₂O₃ (RE=rare earth elements) and SiO₂@Gd₂O₃:Ln³⁺ (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL), and cathodoluminescence spectra as well as lifetimes were used to characterize the resulting SiO₂@RE₂O₃ (RE=rare earth elements) and SiO₂@Gd₂O₃:Ln³⁺ (Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺, Er³⁺, Ho³⁺) samples. The obtained core-shell phosphors have perfect spherical shape with narrow size distribution (average size ca. 380 nm), smooth surface and non-agglomeration. The thickness of shells could be easily controlled by changing the number of deposition cycles (40 nm for two deposition cycles). Under the excitation of ultraviolet, the Ln³⁺ ion mainly shows its characteristic emissions in the core-shell particles from Gd₂O₃:Ln³⁺ (Eu³⁺, Tb³⁺, Sm³⁺, Dy³⁺, Er³⁺, Ho³⁺) shells.     

Uniform Ln (Eu, Tb) doped NaLa(WO4)2 nanocrystals: Synthesis, characterization, and optical properties

Uniform shuttle-like Ln³⁺ (Eu³⁺, Tb³⁺) doped NaLa(WO₄)₂ nanocrystals have been solvothermally synthesized, and the size of the nanocrystals could be easily controlled by adjusting the volume ratio of ethylene glycol (EG) to water. Doped with 5 mol% Eu³⁺ and Tb³⁺ ions, the NaLa(WO₄)₂ nanocrystals showed strong red and green emissions with lifetimes of 0.8 and 1.40 ms, respectively. A high quenching concentration of 15 mol% was observed in Eu³⁺-doped NaLa(WO₄)₂ nanocrystals and 35 mol% in Tb³⁺-doped NaLa(WO₄)₂ nanocrystals. The emission intensity measurements of Eu³⁺-doped NaLa(WO₄)₂ with different sizes indicated that the emission intensity of shuttles with length of 300 nm in average was stronger than that of shuttles with length of 900 nm in average, but was weaker than that of needles with length of 4 and 9 μm in average.