Unveiling the Photo- and Thermal-Stability of Cesium Lead Halide Perovskite Nanocrystals

Lead halide perovskites possess unique characteristics that are well-suited for optoelectronic and energy capture devices, however, concerns about their long-term stability remain. Limited stability is often linked to the methylammonium cation, and all-inorganic CsPbX₃ (X=Cl, Br, I) perovskite nanocrystals have been reported with improved stability. In this work, the photostability and thermal stability properties of CsPbX₃ (X=Cl, Br, I) nanocrystals were investigated by means of electron microscopy, X-ray diffraction, thermogravimetric analysis coupled with FTIR (TGA-FTIR), ensemble and single particle spectral characterization. CsPbBr₃ was found to be stable under 1-sun illumination for 16 h in ambient conditions, although single crystal luminescence analysis after illumination using a solar simulator indicates that the luminescence states are changing over time. CsPbBr₃ was also stable to heating to 250 °C. Large CsPbI₃ crystals (34±5 nm) were shown to be the least stable composition under the same conditions as both XRD reflections and Raman bands diminish under irradiation; and with heating the γ (black) phase reverts to the non-luminescent δ phase. Smaller CsPbI₃ nanocrystals (14±2 nm) purified by a different washing strategy exhibited improved photostability with no evidence of crystal growth but were still thermally unstable. Both CsPbCl₃ and CsPbBr₃ show crystal growth under irradiation or heat, likely with a preferential orientation based on XRD patterns. TGA-FTIR revealed nanocrystal mass loss was only from liberation and subsequent degradation of surface ligands. Encapsulation or other protective strategies should be employed for long-term stability of these materials under conditions of high irradiance or temperature.     

Highly Luminescent Cesium Lead Halide Perovskite Nanocrystals with Tunable Composition and Thickness by Ultrasonication

We describe the simple, scalable, single‐step, and polar‐solvent‐free synthesis of high‐quality colloidal CsPbX₃ (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr₃ and CsPbI₃ nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr₃) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.     

Luminescent Thin Films Enabled by CsPbX3 (X=Cl,Br, I) Precursor Solution

Inorganic cesium lead halide perovskite nanocrystals are candidates for lighting and display materials due to their outstanding optoelectronic properties. However, the dissolution issue of perovskite nanocrystals in polar solvents remains a challenge for practical applications. Herein, we present a newly designed one-step spin-coating strategy to prepare a novel multicolor-tunable CsPbX₃ (X=Cl, Br, I) nanocrystal film, where the CsPbX₃ precursor solution was formed by dissolving PbO, Cs₂CO₃, and CH₃NH₃X into the ionic liquid n-butylammonium butyrate. The as-designed CsPbX₃ nanocrystal films show high color purity with a narrow emission width. Also, the blue CsPb(Cl/Br)₃ film demonstrates an absolute photoluminescence quantum yields (PLQY) of 15.6 %, which is higher than 11.7 % of green CsPbBr₃ and 8.3 % of red CsPb(Br/I)₃ film. This study develops an effective approach to preparing CsPbX₃ nanocrystal thin films, opening a new avenue to design perovskite nanocrystals-based devices for lighting and display applications.     

Carrier dynamics in CsPbI3 perovskite microcrystals synthesized in solution phase

Carrier diffusion and recombination kinetics in all-inorganic CsPbI₃ perovskite microcrystals directly synthesized in solution phase are reported.     

Composition‐Dependent Hot Carrier Relaxation Dynamics in Cesium Lead Halide (CsPbX3, X=Br and I) Perovskite Nanocrystals

Cesium‐based perovskite nanocrystals (NCs) have outstanding photophysical properties improving the performances of lighting devices. Fundamental studies on excitonic properties and hot‐carrier dynamics in perovskite NCs further suggest that these materials show higher efficiencies compared to the bulk form of perovskites. However, the relaxation rates and pathways of hot‐carriers are still being elucidated. By using ultrafast transient spectroscopy and calculating electronic band structures, we investigated the dependence of halide in Cs‐based perovskite (CsPbX₃ with X=Br, I, or their mixtures) NCs on the hot‐carrier relaxation processes. All samples exhibit ultrafast (<0.6 ps) hot‐carrier relaxation dynamics with following order: CsPbBr₃ (310 fs)>CsPbBr_1.5I_1.5 (380 fs)>CsPbI₃ NC (580 fs). These result accounts for a reduced light emission efficiency of CsPbI₃ NC compared to CsPbBr₃ NC.     

All‐Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Recently, lead halide‐based perovskites have become one of the hottest topics in photovoltaic research because of their excellent optoelectronic properties. Among them, organic‐inorganic hybrid perovskite solar cells (PSCs) have made very rapid progress with their power conversion efficiency (PCE) now at 23.7 %. However, the intrinsically unstable nature of these materials, particularly to moisture and heat, may be a problem for their long‐term stability. Replacing the fragile organic group with more robust inorganic Cs⁺ cations forms the cesium lead halide system (CsPbX₃, X is halide) as all‐inorganic perovskites which are much more thermally stable and often more stable to other factors. From the first report in 2015 to now, the PCE of CsPbX₃‐based PSCs has abruptly increased from 2.9 % to 17.1 % with much enhanced stability. In this Review, we summarize the field up to now, propose solutions in terms of development bottlenecks, and attempt to boost further research in CsPbX₃ PSCs.     

Centimeter-Size Single Crystals of Halide Perovskite Photoferroelectric Solid Solution with Ultrahigh Pyroelectricity Boosted Photodetection

Photoferroelectrics, especially emerging halide perovskite ferroelectrics, have motivated tremendous interests owing to their fascinating bulk photovoltaic effect (BPVE) and cross-coupled functionalities. However, solid solutions of halide perovskite photoferroelectrics with controllable structure and enhanced performance are scarcely explored. Herein, through mixing cage cation, a homogeneous halide perovskite photoferroelectric PA₂FA_xMA_1−xPb₂Br₇ solid solution (PA, FA and MA are CH₃CH₂CH₂NH₃⁺, NH₂CHNH₂⁺ and CH₃NH₃⁺, 0≤x≤1) has been developed, which demonstrates tunable Curie temperature in a wide range of 263–323 K and excellent optoelectrical features. As the component adjusted to x=0.7, the bulk crystal demonstrates ultrahigh pyroelectric coefficient up to 1.48 μC cm⁻² K⁻¹ around room temperature. Strikingly, benefiting from the light-induced pyroelectricity and remarkable BPVE, a self-powered and sensitive photodetector based solid solution crystals with boosted responsivity and detectivity over than 1300 % has been achieved. This pioneering work sheds light on the exploration of photoferroelectric solid solutions towards high-performance photoelectronic devices.     

Hydrochromic CsPbBr3 Nanocrystals for Anti‐Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space‐confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non‐luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti‐counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as‐prepared particles can be laser‐jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

Hydrochromic CsPbBr3 Nanocrystals for Anti-Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space-confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non-luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti-counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as-prepared particles can be laser-jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

A Scalable Methylamine Gas Healing Strategy for High‐Efficiency Inorganic Perovskite Solar Cells

An easy and scalable methylamine (MA) gas healing method was realized for inorganic cesium‐based perovskite (CsPbX₃) layers by incorporating a certain amount of MAX (X=I or Br) initiators into the raw film. It was found that the excess MAX accelerated the absorption of the MA gas into the CsPbX₃ film and quickly turned it into a liquid intermediate phase. Through the healing process, a highly uniform and highly crystalline CsPbX₃ film with enhanced photovoltaic performance was obtained. Moreover, the chemical interactions between a series of halides and MA gas molecules were studied, and the results could offer guidance in further optimizations of the healing strategy.     

Tuning Phonon Energies in Lanthanide-doped Potassium Lead Halide Nanocrystals for Enhanced Nonlinearity and Upconversion

Optical applications of lanthanide-doped nanoparticles require materials with low phonon energies to minimize nonradiative relaxation and promote nonlinear processes like upconversion. Heavy halide hosts offer low phonon energies but are challenging to synthesize as nanocrystals. Here, we demonstrate the size-controlled synthesis of low-phonon-energy KPb₂X₅ (X=Cl, Br) nanoparticles and the ability to tune nanocrystal phonon energies as low as 128 cm⁻¹. KPb₂Cl₅ nanoparticles are moisture resistant and can be efficiently doped with lighter lanthanides. The low phonon energies of KPb₂X₅ nanoparticles promote upconversion luminescence from higher lanthanide excited states and enable highly nonlinear, avalanche-like emission from KPb₂Cl₅ : Nd³⁺ nanoparticles. The realization of nanoparticles with tunable, ultra-low phonon energies facilitates the discovery of nanomaterials with phonon-dependent properties, precisely engineered for applications in nanoscale imaging, sensing, luminescence thermometry and energy conversion.     

Full‐Spectrum Persistent Luminescence Tuning Using All‐Inorganic Perovskite Quantum Dots

Applications of persistent luminescence phosphors as night or dark‐light vision materials in many technological fields have fueled up a growing demand for rational control over the emission profiles of the phosphors. This, however, remains a daunting challenge. Now a unique strategy is reported to fine‐tune the persistent luminescence by using all‐inorganic CsPbX₃ (X=Cl, Br, and I) perovskite quantum dots (PeQDs) as efficient light‐conversion materials. Full‐spectrum persistent luminescence with wavelengths covering the entire visible spectral region is achieved through tailoring of the PeQD band gap, in parallel with narrow bandwidth of PeQDs and highly synchronized afterglow decay owing to the single energy storage source. These findings break through the limitations of traditional afterglow phosphors, thereby opening up opportunities for persistent luminescence materials for applications such as a white‐emitting persistent light source and dark‐light multicolor displays.     

Engineering PdIr Nanostructures Synergistically Induced by Self-assembled Surfactants and Halide Ions for Alcohol Electrooxidation

The design and synthesis of metallic nanocatalysts with distinct nanostructures and composition is still a noteworthy topic in the electrochemistry field. In this work, we have realized the morphological evolution of PdIr nanostructures in aqueous solution through the synergistic effect of self-assembled functional surfactants and different halide ions, and achieved precise control of the kinetic and thermodynamic crystalline growth due to the different reduction potential between PdCl₄²⁻, PdBr₄²⁻, and PdI₄²⁻. The actual precursors of PdCl₄²⁻ resulted in ultrathin nanodendrites, PdCl_xBr_(4−x)²⁻ for nanosheets and fewer branched nanodendrites, PdCl_xI_(4−x)²⁻ for nanorings, nanoflowers and multiply concave nanocubes. Owing to the synergistic advantages of structure and composition (alloyed Ir), PdIr nanodendrites exhibited enhanced electrocatalytic activity, anti-poisoning ability, and stability toward alcohols (including ethanol, methanol, and glycerol) electrooxidation reactions. The results would be helpful for thoroughly understanding how structure-directing surfactants and halide ions synergistically determine the production of advanced metallic nanocrystals.     

Completely Amine-Free Open-Atmospheric Synthesis of High-Quality Cesium Lead Bromide (CsPbBr3) Perovskite Nanocrystals

Cesium lead halide perovskite nanocrystals (NCs) CsPbX₃ (X=Cl, Br, and I) have been prominent materials in the last few years due to their high photoluminescence quantum yield (PLQY) for light-emitting diodes and other significant applications in photovoltaics and optoelectronics. In colloidal CsPbX₃ synthesis, the most commonly used ligands are oleic acid and oleylamine. The latter plays an important role in surface passivation but may also be responsible for poor colloidal stability as a result of facile proton exchange leading to the formation of labile oleylammonium halide, which pulls halide ions out of the NC surface. Herein, a facile, efficient, completely amine-free synthesis of cesium lead bromide perovskite nanocrystals using hydrobromic acid as halide source and tri-n-octylphosphane as ligand under open-atmospheric conditions is demonstrated. Hydrobromic acid serves as labile source of bromide ion, and thus this three-precursor approach (separate precursors for Cs, Pb, Br) gives more control than a conventional single-source precursor for Pb and Br (PbBr₂). The use of HBr paved the way to eliminate oleylamine, and thus the formation of labile oleylammonium halide can be completely excluded. Various Cs:Pb:Br molar ratios were studied and optimum conditions for making very stable CsPbBr₃ NCs with high PLQY were found. These completely amine-free CsPbBr₃ perovskite NCs synthesized under bromine-rich conditions exhibit good stability and durability for more than three months in the form of colloidal solutions and films, respectively. Furthermore, stable tunable emission across a wide spectral range through anion exchange was demonstrated. More importantly, this work reports open-atmosphere-stable CsPbBr₃ NCs films exhibiting strong PL, which can be further used for optoelectronic device applications.     

Self‐assembled three‐dimensional flower‐like α‐Fe2O3 nanostructures and their application in catalysis

Three‐dimensional flower‐like α‐Fe₂O₃ nanostructures have been successfully synthesized by a simple surfactant‐free environmental friendly solvolthermal process. The as‐prepared products were investigated by X‐ray powder diffraction, transmission electron microscopy, and field emission scanning electron microscopy. By adjusting the synthetic parameters, the shape of the α‐Fe₂O₃ nanostructures can be controlled. The three‐dimensional flower‐like α‐Fe₂O₃ nanostructures were found to be highly active as catalysts for phenol alkylation. The effects of various parameters, such as reaction temperature, reaction time and the amount of catalyst, were studied. The catalyst was stable and could be reused three times in normal atmosphere without suffering appreciable loss in catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Spindle-Like TiO<Subscript>2</Subscript> Nanostructures and Photocatalytic Activity on Methyl Orange and Methyl Blue Dyes Under Sunlight Radiation

Spindle-like TiO₂ nanostructures was prepared by a simple one pot solvothermal method followed by calcination at 400 °C for 3 h. The sample was characterized using various techniques such as X-ray diffractometer, transmission electron microscopy, Fourier transform infrared spectroscopy and UV–Vis absorption spectroscopy. The crystal structure of TiO₂ nanostructure was measured by X-ray diffractometer. According to the XRD result, the peaks in the sample can be indexed to anatase phase of TiO₂. The morphological characterization of TiO₂ sample was examined by transmission electron microscopy. The synthesized sample consisted of spindle-like shape with size in the range of 50–70 nm. The band gap value of Spindle-like TiO₂ nanostructures is 2.92 eV, which is lower than that of bulk TiO₂ of 3.2 eV. The FTIR bands observed at 493, 443 and 428 cm^?1 confirms the presence of TiO₂. The Spindle-like TiO₂ nanostructures showed photodegradation ability for methyl orange and methyl blue dye. The reuse evaluation of the Spindle-like TiO₂ nanostructures showed that their photocatalytic activity had good durability.     

Controlled Growth of Monocrystalline Organo‐Lead Halide Perovskite and Its Application in Photonic Devices

Organo‐lead halide perovskites (OHPs) have recently emerged as a new class of exceptional optoelectronic materials, which may find use in many applications, including solar cells, light emitting diodes, and photodetectors. More complex applications, such as lasers and electro‐optic modulators, require the use of monocrystalline perovskite materials to reach their ultimate performance levels. Conventional methods for forming single crystals of OHPs like methylammonium lead bromide (MAPbBr₃) afford limited control over the product morphology, rendering the assembly of defined microcavity nanostructures difficult. We overcame this by synthesizing for the first time (MA)[PbBr₃]⋅DMF ( 1 ), and demonstrating its facile transformation into monocrystalline MAPbBr₃ microplatelets. The MAPbBr₃ microplatelets were tailored into waveguide based photonic devices, of which an ultra‐low propagation loss of 0.04 dB μm⁻¹ for a propagation distance of 100 μm was demonstrated. An efficient active electro‐optical modulator (AEOM) consisting of a MAPbBr₃ non‐linear arc waveguide was demonstrated, exhibiting a 98.4 % PL intensity modulation with an external voltage of 45 V. This novel synthetic approach, as well as the demonstration of effective waveguiding, will pave the way for developing a wide range of photonic devices based on organo‐lead halide perovskites.     

Liquid‐Phase Epitaxial Growth of Two‐Dimensional Semiconductor Hetero‐nanostructures

Although many two‐dimensional (2D) hybrid nanostructures are being prepared, the engineering of epitaxial 2D semiconductor hetero‐nanostructures in the liquid phase still remains a challenge. The preparation of 2D semiconductor hetero‐nanostructures by epitaxial growth of metal sulfide nanocrystals, including CuS, ZnS and Ni₃S₂, is achieved on ultrathin TiS₂ nanosheets by a simple electrochemical approach by using the TiS₂ crystal and metal foils. Ultrathin CuS nanoplates that are 50–120 nm in size and have a triangular/hexagonal shape are epitaxially grown on TiS₂ nanosheets with perfect epitaxial alignment. ZnS and Ni₃S₂ nanoplates can be also epitaxially grown on TiS₂ nanosheets. As a proof‐of‐concept application, the obtained 2D CuS–TiS₂ composite is used as the anode in a lithium ion battery, which exhibits a high capacity and excellent cycling stability.     

Facile synthesis of ternary AgInS2 nanowires and their self-assembly of fingerprint-like nanostructures

Nanowires (NWs) and self-assemble nanostructures made of chalcogenide semiconductor nanocrystals (NCs) are of great interests to the fundamental studies and practical applications. In this study, we reported a seeded-mediated growth of AgInS₂ NWs and their intriguing self-assembly nanostructures with fingerprint-like shape. The key to the formation and self-assembly of AgInS₂ NWs was the presence of In-S species that was a type of molecular metal chalcogenide complexes, serving as specific inorganic ligands for the growth of NWs and cross-linker molecules for the self-assembly of fingerprint-like nanostructures. Systematic studies were carried out to investigate the reaction factors, including the thermodynamics, amount and type of In precursors, and 1-dodecanethiol usage, to the success of the desired products.     

Hydrothermal Synthesis and Properties of Controlled α‐Fe2O3 Nanostructures in HEPES Solution

A facile, template‐free, and environmentally friendly hydrothermal strategy was explored for the controllable synthesis of α‐Fe₂O₃ nanostructures in HEPES solution (HEPES=2‐[4‐(2‐hydroxyethyl)‐1‐piperazinyl]ethanesulfonic acid). The effects of experimental parameters including HEPES/FeCl₃ molar ratio, pH value, reaction temperature, and reaction time on the formation of α‐Fe₂O₃ nanostructures have been investigated systematically. Based on the observations of the products, the function of HEPES in the reaction is discussed. The different α‐Fe₂O₃ nanostructures possess different optical, magnetic properties, and photocatalytic activities, depending on the shape and size of the sample. In addition, a novel and facile approach was developed for the synthesis of Au/α‐Fe₂O₃ and Ag/α‐Fe₂O₃ nanocomposites in HEPES buffer solution; this verified the dual function of HEPES both as reductant and stabilizer. This work provides a new strategy for the controllable synthesis of transition metal oxide nanostructures and metal‐supported nanocomposites, and gives a strong evidence of the relationship between the property and morphology/size of nanomaterials.