High temperature oxidation of HP40 alloy under H2–H2O and air atmospheres: a surface study

In the present work, high temperature oxidation of HP40 alloy was carried out at 1050 °C under H₂–H₂O and air atmospheres; the influence of atmosphere on surface morphology and composition was studied. Octahedral crystals with considerable spalled regions are present on the surface of alloy oxidized under air, the oxide scale composes of MnCr₂O₄, Cr₂O₃ and (Fe, Ni)Cr₂O₄ and spalled regions exhibit base alloy and SiO₂‐rich regions. The surface of alloy oxidized under H₂–H₂O is fully covered by small granular crystals and blade‐type structures without spallation, and the oxide scale composes of MnCr₂O₄ and Cr₂O₃. Moreover, X‐ray photoelectron spectroscopy analysis shows considerable difference in chemical valence states of Mn, Cr and O elements on both alloy surfaces, and hydroxyl compounds exist on the alloy oxidized under H₂–H₂O atmosphere. Copyright © 2017 John Wiley & Sons, Ltd.     

Properties and Structure of Spinel Li‐Mn‐O‐F Compounds for Cathode Materials of Secondary Lithium‐ion Battery

The spinel Li‐Mn‐O‐F compound cathode materials were synthesized by solid‐state reaction from calculated amounts LiOH‐H₂O, MnO₂(EMD) and LiF. The results of the electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. It's initial capacity is ‐ 115 mAh.g¹ and reversible efficiency is about 100%. After 60 cycles, its capacity is still around 110 mAh.g¹ with nearly 100% reversible efficiency. The spinel Li‐Mn‐O‐F compound possibly has two structure models: interstitial model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ, in which the fluorine is located on the interstice of crystal lattice, and substituted model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O_4‐δF_δ, which the fluorine atom substituted the oxygen atom. The electrochemical result supports the interstitial model [Li][Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ.     

Sensitive and Selective Sensing of Hydrogen Peroxide with Iron‐Tetrasulfophthalocyanine‐Graphene‐Nafion Modified Screen‐Printed Electrode

We developed a novel iron‐tetrasulfophthalocyanine‐graphene‐Nafion (FeTSPc‐GR‐Nafion) modified screen‐printed electrode to determine hydrogen peroxide (H₂O₂) with high sensitivity and selectivity. The nanocomposite film (FeTSPc‐GR‐Nafion) exhibits an excellent electrocatalytic activity towards oxidation of H₂O₂ at a potential of +0.35 V in the absence of enzyme. A comparative study reveals that the FeTSPc‐GR complexes play a dual amplification role. Amperometric experiment indicates that the sensors possess good sensitivity and selectivity, with a linear range from 2.0×10^?7 M to 5.0×10^?3 M and a detection limit of 8.0×10^?8 M. This sensor has been successfully used to develop the glucose biosensor and has also been applied to determine H₂O₂ in sterile water.     

A new heteroleptic oxalate‐based compound: poly[[2‐(aminomethyl)pyridine]di‐μ6‐oxalato‐chromium(III)potassium(I)]

The title compound, [KCr(C₂O₂)₂(C₆H₈N₂)]_n, was obtained from aqueous solution and analyzed with single‐crystal X‐ray diffraction at 100 K. It crystallizes in the monoclinic space group C2/c and displays a three‐dimensional polymeric architecture built up by bimetallic oxalate‐bridged Cr^III–K helical chains linked through centrosymmetric K₂O₂ units to yield a sheet‐like alternating P/M arrangement which looks like that of the previously described two‐dimensional [NaCr(ox)₂(pyim)(H₂O)]·2H₂O [pyim is 2‐(pyridin‐2‐yl)imidazole; Lei et al. (2006). Inorg. Chem. Commun. 9 , 486–488]. The Cr^III ions in each helix have the same chirality. The infinite neutral sheets are eclipsed with respect to each other and are held together by a hydrogen‐bonding network involving 2‐(aminomethyl)pyridine H atoms and oxalate O atoms. Each sheet gives rise to channels of Cr₄K₄ octanuclear rings and each resultant hole is occupied by a pair of 2‐(aminomethyl)pyridine ligands with partial overlap. The shortest Cr...Cr distance [5.593 (4) Å] is shorter than usually observed in the K–M^III–oxalate family.     

Self‐Assembly of Polyoxometalate‐Supported Ln‐H nydroxo/Oxo Clusters with 1D Extended Structure: [LnIII(H2O)7Cr(OH)6Mo6O18]n·4nH2O (Ln = Ce,Sm, Eu)

Three novel polyoxometalate compounds consisting of Anderson‐type anions and trivalent lanthanide cations, [Ln(H₂O)₇Cr(OH)₆Mo₆O₁₈]_n·4nH₂O (Ln = Ce 1 ; Sm 2 ; Eu 3 ), have been synthesized in aqueous solution and characterized by single crystal X‐ray diffraction, elemental analyses, IR spectra, and TG analyses. Single crystal X‐ray diffractions reveal that the structures of the 1:1 composite compound formed by the heteropolyanion [Cr(OH)₆Mo₆O₁₈]^3? as the building unit and the [Ln(H₂O)₇]³⁺ complex fragment as the linker, which exhibit a type of zig‐zag chain with alternating cations and anions through the Mo‐Ot′‐Ln‐Ot′‐Mo linkage in the crystal. The magnetic properties of 1 ? 3 have been studied by measuring their magnetic susceptibility over the temperature range of 2‐300 K. The UV‐vis spectra of 1 give the Mo‐O and Cr^III‐O charge transfer transitions at 203 and 543 nm, respectively. In addition, the fluorescent characteristic transition of the Eu³⁺ ions in compound 3 is reported.     

A Tri‐µ‐O‐S‐O Manganese Dimer: Synthesis,Structral and EPR Study

A Tri‐µ‐O‐S‐O coordinative manganese dimer: [Mn₂(SO₄)₂(phen)₄]·CH₃OH (phen1,10‐phenanthroline) ( 1 ) was yielded by the reaction of 1,10‐phenanthroline and MnSO₄·H₂O in a mixed solvent of methanol and acetonitrile under room temperature and was structurally characterized. Single crystal analysis shows that complex 1 has polymeric structure based on binuclear Mn(II) units bridged by O‐S‐O groups of two SO₄²⁻ anion. The UV spectrum of the complex clarifies that each metal‐organic building unit parallels with each other through the Π‐Π interactions of face‐to‐face separations of two 1,10‐phen planes among the complex, forming a layered structure. And the electronic paramagnetic resonance (EPR) signal clearly indicates that those manganese atoms in complex 1 are in +2 oxidation states.     

Elimination of 4‐chlorophenol in aqueous solution by the Novel Pd/MIL‐101(Cr)‐Hydrogen‐Accelerated catalytic fenton system

Excessive consumption of Fe (II) and massive generation of sludge containing Fe (III) from classic Fenton process remains a major obstacle for its poor recycling of Fe (III) to Fe (II). Therefore, the MHACF‐MIL‐101(Cr) system, by introducing H₂, Pd⁰ and MIL‐101(Cr) into Fenton reaction system, was developed at normal temperature and pressure. In this system, the reduction of Fe^III back to Fe^II by solid catalyst Pd/MIL‐101(Cr) for the storage and activation of H₂, was accelerated significantly by above 10‐fold and 5‐fold controlled with the H₂‐MIL‐101(Cr) system and H₂‐Pd⁰ system, respectively. However, the concentration of Fe (II) generated by the reduction of Fe (III) could not be detected with the only input of H₂ and without the addition of MOFs material. In addition, the apparent consumption of Fe (II) in MHACF‐MIL‐101(Cr) system was half of that in classical Fenton system, while more Fe (II) might be reused infinitely in fact. Accordingly, only trace amount of Fe (II) vs H₂O₂ concentration was needed and hydroxyl radicals through the detection of para‐hydroxybenzoic acid (p‐HBA) as the oxidative product of benzoic acid (BA) by·OH could be continuously generated for the effective degradation of 4‐chlorophenol(4‐CP). The effects of initial pH, concentration of 4‐CP, dosage of Fe²⁺, H₂O₂ and Pd/MIL‐101(Cr) catalyst, Pd content and H₂ flow were investigated, combined with systematic controlled experiments. Moreover, the robustness and morphology change of Pd/MIL‐101(Cr) were thoroughly analyzed. This study enables better understanding of the H₂‐mediated Fenton reaction enhanced by Pd/MIL‐101(Cr) and thus, will shed new light on how to accelerate Fe (III)/Fe (II) redox cycle and develop more efficient Fenton system.     

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

Investigation on the dissolution of Mn ions from LiMn2O4 cathode in the application of lithium ion batteries: First principle molecular orbital method

The dissolution phenomenon of Mn ions in LiMn₂O₄ (LMO) cathode material for lithium ion batteries (LIBs) was investigated by a first principle calculation using the discrete variational Xα molecular orbital method. It was found that the oxidation number of Mn ions easily increases at high temperatures due to the empty levels of Mn 3d orbitals located in the vicinity of the Fermi energy level of LMO crystal. The changes of density of states (DOS) and Mn‐O bonding properties with doping were examined. Analysis of DOS showed that the substitution of elements with a smaller oxidation number than Mn was found effective in keeping Mn ions at higher oxidation states. From the calculation of bonding properties, the dissolution of Mn was found to be strongly correlated with the covalent nature of Mn‐O bond. Based on the results, we concluded that increasing the covalent character of Mn‐O bond is effective to minimize the dissolution of Mn ions, along with suppressing the formation of Jahn‐Teller‐active Mn³⁺ by inducing Mn ions at high oxidation state with proper selection of doping elements. © 2012 Wiley Periodicals, Inc.     

{[Mn2(μ3‐Tda)2(μ‐H2O)(H2O)2(bipy)]·DMF}n – a 2D Manganese(II) Coordination Polymer involving Six‐membered Binuclear Metallacycle Nodes

The single crystal X‐ray analysis of a novel thiophene‐2,5‐dicarboxylic acid (H₂Tda) Manganese(II) coordination polymer, {Mn₂(μ₃‐Tda)₂(μ‐H₂O)(H₂O)₂(bipy)]·DMF}_n, shows two different types of Mn²⁺‐ions with environment of Mn1O₆ and Mn2O₄N₂, and the complex is a two‐dimensional polymer as a result of bridging (Tda)^2? ligands and by connecting the carboxylate‐ and water‐bridged {Mn₂(μ‐Tda)₂(μ‐H₂O)} nodes.     

One‐pot synthesis of polyaniline doped with transition metal ions using H2O2 as oxidant

Polyanilines (PANIs) doped with Zn²⁺ and Cu²⁺ were synthesized by H₂O₂ oxidative polymerization of aniline in the presence of corresponding metal chloride in solution. The products were characterized by elemental analysis, UV‐Vis‐NIR, FTIR and Raman spectroscopies. Scanning electron micrograph was employed to examine the morphology of PANIs fabricated in the presence of different transition metals. Experimental results showed that transition metal ions had been successfully incorporated into the polymer, and there was a strong interaction between the transition metal ions and the PANI chains. The electrical conductivity of PANI doped with Zn²⁺ and Cu²⁺ is 0.37 and 0.21 S/cm, respectively, which is higher than that of HCl doping PANI corresponding to 0.052 S/cm. The cyclic voltammetric study has indicated that incorporation of metal ions in PANI backbone results in increasing of specific capacitance compared to that of HCl doping PANI. Copyright © 2014 John Wiley & Sons, Ltd.     

Study of the [Cr(H2O)5NO]2+ Complex via Density Functional Theory

On the basis of density functional theory, the spin ground state of chromium‐nitrosyl complex [Cr(H₂O)₅NO]²⁺ (S = 1/2) is studied via B3LYP hybrid method. Its vibrational frequencies, atomic charges, and spin densities are analyzed. The excitation energies are evaluated using the CIS method. Our calculated N‐O stretching frequency and excitation energies are in good agreement with the IR and UV‐vis data. The related Cr^I(H₂O)₆⁺, Cr^II(H₂O)₆²⁺, and Cr^III(H₂O)₆³⁺ complexes are employed as the reference compounds to determine the characteristics of the central Cr. Results indicate that the effective Cr oxidation state is close to Cr(I).     

Titelbild: O2 Activation and Double C?H Oxidation by a Mononuclear Manganese(II) Complex (Angew. Chem. 2/2016)

A Mn^II complex, [Mn(dpeo)₂]²⁺ (dpeo=1,2‐di(pyridin‐2‐yl)ethanone oxime), activates O₂, with ensuing stepwise oxidation of the methylene group in the ligands providing an alkoxide and ultimately a ketone group. X‐ray crystal‐structure analysis of an intermediate homoleptic alkoxide Mn^III complex shows tridentate binding of the ligand via the two pyridyl groups and the newly installed alkoxide moiety, with the oxime group no longer coordinated. The structure of a Mn^II complex of the final ketone ligand, cis‐[MnBr₂(hidpe)₂] (hidpe=2‐(hydroxyimino)‐1,2‐di(pyridine‐2‐yl)ethanone) shows that bidentate oxime/pyridine coordination has been resumed. H₂¹⁸O and ¹⁸O₂ labeling experiments suggest that the inserted O atoms originate from two different O₂ molecules. The progress of the oxygenation was monitored through changes in the resonance‐enhanced Raman bands of the oxime unit.     

Magnetocaloric Properties of Heterometallic 3d–Gd Complexes Based on the [Gd(oda)3]3− Metalloligand

A series of heterometallic 3d–Gd³⁺ complexes based on a lanthanide metalloligand, [M(H₂O)₆][Gd(oda)₃] ? 3 H₂O [M=Cr³⁺ ( 1‐Cr )] (H₂oda=2,2′‐oxydiacetic acid), [M(H₂O)₆][MGd(oda)₃]₂ ? 3 H₂O [M=Mn²⁺ ( 2‐Mn ), Fe²⁺ ( 2‐Fe ) and Co²⁺ ( 2‐Co )], and [M₃Gd₂(oda)₆(H₂O)₆] ? 12 H₂O [M=Ni²⁺ ( 3‐Ni ), Cu²⁺ ( 3‐Cu ), and Zn²⁺ ( 3‐Zn )], are reported. Magnetic and heat‐capacity studies revealed a significant impact on the magnetocaloric effect depending on the anisotropy of the 3d transition metal ions, as confirmed by comparison of the observed maximum values of ?ΔS_m between complexes 2‐Co and 1‐Cr . In these two complexes, the 3d metal ions have the same spin (S=3/2 for Co²⁺ and Cr³⁺ ions), and the theoretical calculation suggested a larger ?ΔS_m value for 2‐Co (47.8 J K^?1 kg^?1) than 1‐Cr (37.5 J K^?1 kg^?1); however, the significant anisotropy of Co²⁺ ions in 2‐Co , which can result in smaller effective spins, gives a smaller value of ?ΔS_m for 2‐Co (32.2 J K^?1 kg^?1) than for 1‐Cr (35.4 J K^?1 kg^?1) at ΔH=9 T.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Magnetic properties of two double‐layer structures built from hydroxy­naphthoic acids and manganese

Double‐layer structures consisting of alternating polar and non‐polar layers have been prepared using Mn²⁺ ions and o‐hydroxy­naphthoic acids. The polar layers contain the Mn²⁺ ions, carboxylate groups, hydr­oxy groups and water mol­ecules. The non‐polar layers are built up from the naphthalene moieties. In catena‐poly[[diaqua­manganese(II)]bis­(μ‐3‐hy­droxy‐2‐naphthoato‐κ²O:O′)] (also called manganese 3‐hy­droxy‐2‐naphthoate dihydrate), [Mn(C₁₁H₇O₃)₂(H₂O)₂]_n, (I), the Mn²⁺ ions are connected by carboxylate groups to form two‐dimensional networks. This compound shows distinct antiferromagnetic inter­actions and long‐range ordering at low temperature. In contrast, tetra­aqua­bis(1‐hydr­oxy‐2‐naph­thoato‐κO)manganese(II), [Mn(C₁₁H₇O₃)₂(H₂O)₄], (II), which lacks a close linkage between the Mn²⁺ ions, reveals purely paramagnetic behaviour. In (II), the Mn²⁺ ion lies on an inversion centre.     

A new two‐dimensional managnese(II) coordination polymer constructed by 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

In recent years, N‐heterocyclic carboxylate ligands have attracted much interest in the preparation of new coordination polymers since they contain N‐atom donors, as well as O‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. A new two‐dimensional coordination polymer, namely poly[[μ₃‐2,2′‐(1,2‐phenylene)bis(4‐carboxy‐1H‐imidazole‐5‐carboxylato)‐κ⁶O⁴,N³,N^3′,O^4′:O⁵:O^5′]manganese(II)], [Mn(C₁₆H₈N₄O₈)]_n or [Mn(H₄Phbidc)]_n, has been synthesized by the reaction of Mn(OAc)₂·4H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, each Mn^II ion is six‐coordinated by two N atoms from one H₄Phbidc²⁻ ligand and by four O atoms from three H₄Phbidc²⁻ ligands, forming a significantly distorted octahedral MnN₂O₄ coordination geometry. The Mn^II ions are linked by hexadentate H₄Phbidc²⁻ ligands, leading to a two‐dimensional structure parallel to the ac plane. In the crystal, adjacent layers are further connected by N—H…O hydrogen bonds, forming a three‐dimensional structure in the solid state.     

A new one‐dimensional CdII coordination polymer with a two‐dimensional layered structure incorporating 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate ligands

The N‐heterocyclic ligand 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) has a rich variety of coordination modes and can lead to polymers with intriguing structures and interesting properties. In the coordination polymer catena‐poly[[cadmium(II)‐bis[μ‐benzene‐1,2‐dicarboxylato‐κ⁴O¹,O^1′:O²,O^2′]‐cadmium(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N²:N³;κ²N³:N²] dimethylformamide disolvate], {[Cd(C₈H₄O₄)(C₁₁H₁₀N₄)]·C₃H₇NO}_n, (I), each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and two N atoms from two symmetry‐related imb ligands. Two Cd^II ions are connected by two benzene‐1,2‐dicarboxylate ligands to generate a binuclear [Cd₂(1,2‐bdic)₂] unit. The binuclear units are further connected into a one‐dimensional chain by pairs of bridging imb ligands. These one‐dimensional chains are further connected through N—H…O hydrogen bonds and π–π interactions, leading to a two‐dimensional layered structure. The dimethylformamide solvent molecules are organized in dimeric pairs via weak interactions. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Tetradecacobalt(II)‐Containing 36‐Niobate [Co14(OH)16(H2O)8Nb36O106]20− and Its Photocatalytic H2 Evolution Activity

A gigantic Co₁₄‐containing 36‐niobate, Na₁₂K₈[Co₁₄(OH)₁₆(H₂O)₈Nb₃₆O₁₀₆] ? 71H₂O ( 1 ), has been prepared by the hydrothermal method and structurally characterized. Polyanion [Co₁₄(OH)₁₆(H₂O)₈Nb₃₆O₁₀₆]^20? ( 1 a ) comprises a central Co₇ core, surrounded by another seven isolated Co²⁺ ions and six Lindqvist‐type (Nb₆O₁₉) hexaniobate fragments. This is the first example of a high‐nuclear cobalt‐cluster‐containing polyoxoniobate. The photocatalytic H₂ evolution activity of Pt‐loaded 1 was observed in methanol solution under irradiation using a 300 W Xe lamp.     

Studies of degradation behaviors of poly (3‐hexylthiophene) layers by X‐ray photoelectron spectroscopy

Degradation behaviors of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) layers on NiO in the presence of H₂O at ambient pressure and dark conditions were studied using X‐ray photoelectron spectroscopy (XPS). Upon H₂O exposure at 120 °C, partial oxidation of P3HT together with molecular water incorporation, but with the maintained local ring‐structure, were deduced by XPS. Valence band spectra of XPS evidenced that the partial oxidation of P3HT local structure could alter π‐conjugation systems of P3HT layers, forming additional electronic states close to its original highest occupied molecular orbital. For comparison, P3HT surface was also exposed to O₂, and no change in the S 2p and C 1s spectra was found by O₂ exposure at 120 °C, implying that H₂O plays a major role at the initial stage of P3HT oxidation. Copyright © 2014 John Wiley & Sons, Ltd.