1, 9‐Dihydro‐purine‐6‐thione Derivatives of the d8–d10 Metal Ions (PdII,PtII, and CuI): Synthesis,Spectroscopy, and Structures

Reaction of 1, 9‐dihydro‐purine‐6‐thione (puSH₂) in presence of aqueous sodium hydroxide with PdCl₂(PPh₃)₂ suspended in ethanol formed [Pd(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 1 ). Similarly, complexes [Pd(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 2 – 4 ) {L‐L = dppm (m = 1) ( 2 ), dppp (m = 3) ( 3 ), dppb (m = 4) ( 4 )} were prepared using precursors the [PdCl₂(L‐L)] {L‐L = Ph₂P–(CH₂)_m–PPh₂}. Reaction of puSH₂ suspended in benzene with platinic acid, H₂PtCl₆, in ethanol in the presence of triethylamine followed by the addition of PPh₃ yielded the complex [Pt(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 5 ). Complexes [Pt(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 6 – 8 ) {L‐L = dppm ( 6 ), dppp ( 7 ), dppb ( 8 )} were prepared similarly. The 1, 9‐dihydro‐purine‐6‐thione acts as N⁷,S‐chelating dianion in compounds 1 – 8 . The reaction of copper(I) chloride [or copper(I) bromide] in acetonitrile with puSH₂ and the addition of PPh₃ in methanol yielded the same product, [Cu(κ²‐N⁷,S‐puSH)(PPh₃)₂] ( 9 ), in which the halogen atoms are removed by uninegative N, S‐chelating puSH^– anion. However, copper(I) iodide did not lose iodide and formed the tetrahedral complex, [CuI(κ¹‐S‐puSH₂)(PPh₃)₂] ( 10 ), in which the thio ligand is neutral. These complexes were characterized with the help of elemental analysis, NMR spectroscopy (¹H, ³¹P), and single‐crystal X‐ray crystallography ( 3 , 7 , 8 , 9 , and 10 ).     

Metal Derivatives of Heterocyclic‐2‐thiones: Crystal Structures of [Bis(diphenylphosphanyl)propane][bis(pyrimidine‐2‐thiolato)]ruthenium(II) and [Bis(diphenylphosphanyl)methane][bis(pyridine‐2‐thiolato)]ruthenium(II)

Ruthenium(II) Complexes containing pyrimidine‐2‐thiolate (pymS^–) and bis(diphenylphosphanyl)alkanes [Ph₂P–(CH₂)_m–PPh₂, m = 1, dppm; m = 2, dppe; m = 3, dppp; m = 4, dppb] are described. Reactions of [RuCl₂L₂] (L = dppm, dppp) and [Ru₂Cl₄L₃] (L = dppb) with pyrimidine‐2‐thione (pymSH) in 1:2 molar ratio in dry benzene in the presence of Et₃N base yielded the [Ru(pymS)₂L] complexes (pymS^– = pyrimidine‐2‐thiolate; L = dppm ( 1 ); dppp ( 3 ); dppb ( 4 )). The complex [Ru(pymS)₂(dppe)] ( 2 ) was indirectly prepared by the reaction of [Ru(pymS)₂(PPh₃)₂] with dppe. These complexes were characterized using analytical data, IR, ¹H, ¹³C, ³¹P NMR spectroscopy, and X‐ray crystallography (complex 3 ). The crystal structure of the analogous complex [Ru(pyS)₂(dppm)] ( 5 ) with the ligand pyridine‐2‐thiolate (pyS^–) was also described. X‐ray crystallographic investigation of complex 3 has shown two four‐membered chelate rings (N, S donors) and one six‐membered ring (P, P donors) around the metal atom. Compound 5 provides the first example in which Ru^II has three four‐membered chelate rings: two made up by N, S donor ligands and one made up by P, P donor ligand. The arrangement around the metal atoms in each complex is distorted octahedral with cis:cis:trans:P, P:N, N:S, S dispositions of the donor atoms. The ³¹P NMR spectroscopic data revealed that the complexes are static in solution, except 2 , which showed the presence of more than one species.     

Metal Derivatives of Heterocyclic Thioamides: Synthesis and Crystal Structures of Copper Complexes with 1‐Methyl‐1,3‐imidazoline‐2‐thione and 1,3‐Imidazoline‐2‐thione

Reactions of copper(I) halides (Cl, Br, I) with 1‐methyl‐1, 3‐imidazoline‐2‐thione (mimzSH) in 1 : 2 molar ratio yielded sulfur‐bridged dinuclear [Cu₂X₂(μ‐S‐mimzSH)₂(η¹‐S‐mimzSH)₂] (X = I, 1 , Br, 2 ; Cl, 3 ) complexes. Copper(I) iodide with 1,3‐imidazoline‐2‐thione (imzSH₂) and Ph₃P in 1 : 1 : 1 molar ratio has also formed a sulfur‐bridged dinuclear [Cu₂I₂(μ‐S‐imzSH₂)₂(PPh₃)₂] ( 4 ) complex. The central Cu(μ‐S)₂Cu cores form parallelograms with unequal Cu–S bond distances {2.324(2), 2.454(3) Å} ( 1 ); {2.3118(6), 2.5098(6) Å} ( 2 ); {2.3075(4), 2.5218(4) Å} ( 3 ); {2.3711(8), 2.4473(8) Å} ( 4 ). The Cu···Cu separations, 2.759–2.877Å in complexes 1 – 3 are much shorter than 3.3446Å in complex 4 . The weak intermolecular interactions {H₂CH···S^# ( 2 ); CH···Cl^# ( 3 ); NH···I^# ( 4 )} between dimeric units in complexes 2 – 4 lead to the formation of linear 1D polymers.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

Oxorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

Reactions of the oxorhenium(V) complexes [ReOX₃(PPh₃)₂] (X = Cl, Br) with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (L^Ph) under mild conditions and in the presence of MeOH or water give [ReOX₂(Y)(PPh₃)(L^Ph)] complexes (X = Cl, Br; Y = OMe, OH). Attempted reactions of the carbene precursor 5‐methoxy‐1,3,4‐triphenyl‐4,5‐dihydro‐1H‐1,2,4‐triazole ( 1 ) with [ReOCl₃(PPh₃)₂] or [NBu₄][ReOCl₄] in boiling xylene resulted in protonation of the intermediately formed carbene and decomposition products such as [HL^Ph][ReOCl₄(OPPh₃)], [HL^Ph][ReOCl₄(OH₂)] or [HL^Ph][ReO₄] were isolated. The neutral [ReOX₂(Y)(PPh₃)(HL^Ph)] complexes are purple, airstable solids. The bulky NHC ligands coordinate monodentate and in cis‐position to PPh₃. The relatively long Re–C bond lengths of approximate 2.1Å indicate metal‐carbon single bonds.     

Synthesis and Reactivity of Structurally Analogous Phenylimido and Oxo Complexes of Rhenium(V) with N,N‐Dialkyl‐N′‐benzoylthioureas

[ReOCl₃(PPh₃)₂] and [Re(NPh)Br₃(PPh₃)₂] react at room temperature with equivalent amounts of N,N‐dialkyl‐N′‐benzoylthioureas (HR¹R²btu) in CH₂Cl₂ under formation of the rhenium(V) complexes [ReOCl₂(R¹R¹btu)(PPh₃)] and [Re(NPh)Br₂(R¹R²btu)(PPh₃)], respectively. The products are structurally analogous with the oxygen atoms of the benzoylthioureas binding in trans positions to the oxo or phenylimido ligands. Prolonged reaction times result in the reduction of the oxo compound by the released PPh₃ and the formation of rhenium(III) complexes of the composition [ReCl₂(PPh₃)₂(R¹R²btu)], while such a second reaction path is excluded for the phenylimido compound. Phenylimido species with more than one N,N‐dialkyl‐N′‐benzoylthioureato ligand could not be isolated, even when a large excess of HR¹R²btu was used during the reaction.     

Synthesis and Characterization of New Copper(I) Complexes Containing Thione Derivatives of 1, 2, 4‐Triazine. Crystal Structure of [Cu(PPh3)2(ATTO)]NO3 (ATTO = 4‐amino‐1, 2, 4‐triazin‐3(2H)‐thione‐5‐one)

The reaction of 4‐amino‐1, 2, 4‐triazin‐3(2H)‐thione‐5‐one (ATTO, 1 ) with [Cu(PPh₃)₂]NO₃ in ethanol led to the complex [Cu(PPh₃)₂(ATTO)]NO₃ ( 2 ). 2 was characterized by elemental analyses, IR, ¹H NMR and Raman spectroscopy. A single‐crystal X‐ray diffraction of compound 2 revealed that ATTO acts as a bidentate ligand via its nitrogen and sulfur atoms. Crystal data for 2 at 20 °C: space group P2₁/n with a = 975.7(1), b = 1533.5(2), c = 2504.2(3) pm, β = 92.25(1)°, Z = 4, R₁ = 0.0632.     

The Influence of Substituents at C2 Carbon Atom of Thiosemicarbazones {R(H)C2=N3‐N2(H)‐C1(=S)‐N1H2} on their Dentacy in PtII/PdII Complexes: Synthesis,Spectroscopy, and Crystal Structures

The coordination chemistry of platinum(II) with a series of thiosemicarbazones {R(H)C²=N³‐N²(H)‐C¹(=S)‐N¹H₂, R = 2‐hydroxyphenyl, H₂stsc; pyrrole, H₂ptsc; phenyl, Hbtsc} is described. Reactions of trans‐PtCl₂(PPh₃)₂ precursor with H₂stsc (or H₂ptsc) in 1 : 1 molar ratio in the presence of Et₃N base yielded complexes, [Pt(η³‐ O, N³, S‐stsc)(PPh₃)] ( 1 ) and [Pt(η³‐ N⁴, N³, S‐ptsc)(PPh₃)] ( 2 ), respectively. Further, trans‐PtCl₂(PPh₃)₂ and Hbtsc in 1 : 2 (M : L) molar ratio yielded a different compound, [Pt(η²‐ N³, S‐btsc)(η¹‐S‐btsc)(PPh₃)] ( 3 ). Complex 1 involved deprotonation of hydrazinic (‐N²H‐) and hydroxyl (‐OH) groups, and stsc^2? is coordinating via O, N³, S donor atoms, while complex 2 involved deprotonation of hydrazinic (‐N²H‐) and ‐N⁴H groups and ptsc^2? is probably coordinating via N⁴, N³, S donor atoms. Reaction of PdCl₂(PPh₃)₂ with Hbtsc‐Me {C₆H₅(CH₃)C²=N³‐N²(H)‐C¹(=S)‐N¹H₂} yielded a cyclometallated complex [Pd(η³‐C, N³, S‐btsc‐Me)(PPh₃)] ( 4 ). These complexes have been characterized with the help of analytical data, spectroscopic techniques {IR, NMR (¹H, ³¹P), U.V} and single crystal X‐ray crystallography ( 1 , 3 and 4 ). The effects of substituents at C² carbon of thiosemicarbazones on their dentacy and cyclometallation are emphasized.     

Synthesis,Structures, and Reactivities of Pincer‐Type Ruthenium Complexes Bearing Two Proton‐Responsive Pyrazole Arms

A new metal–ligand bifunctional, pincer‐type ruthenium complex [RuCl( L1‐H2 )(PPh₃)₂]Cl ( 1 ; L1‐H2 =2,6‐bis(5‐tert‐butyl‐1H‐pyrazol‐3‐yl)pyridine) featuring two proton‐delivering pyrazole arms has been synthesized. Complex 1 , derived from [RuCl₂(PPh₃)₃] with L1‐H2 , underwent reversible deprotonation with potassium carbonate to afford the pyrazolato–pyrazole complex [RuCl(L1‐H)(PPh₃)₂] ( 2 ). Further deprotonation of 1 and 2 with potassium hexamethyldisilazide in methanol resulted in the formation of the bis(pyrazolato) complex [Ru(L1)(MeOH)(PPh₃)₂] ( 3 ). Complex 3 smoothly reacted with dioxygen and dinitrogen to give the side‐on peroxo complex [Ru(L1)(O₂)(PPh₃)₂] ( 4 ) and end‐on dinitrogen complex [Ru(L1)(N₂)(PPh₃)₂] ( 5 ), respectively. On the other hand, the reaction of [RuCl₂(PPh₃)₃] with less hindered 2,6‐di(1H‐pyrazol‐3‐yl)pyridine ( L3‐H2 ) led to the formation of the dinuclear complex [{RuCl₂(PPh₃)₂}₂(μ₂‐ L3‐H2 )₂] ( 6 ), in which the pyrazole‐based ligand adopted a tautomeric form different from L1‐H2 in 1 and the central pyridine remained uncoordinated. The detailed structures of 1 , 2 , 3 , 3.MeOH , 4 , 5 , 6 were determined by X‐ray crystallography.     

Thiosemicarbazonates of Ruthenium(II): Crystal Structures of [Bis(triphenylphosphine)][bis(N‐phenyl‐pyridine‐2‐carbaldehyde Thiosemicarbazonato)]ruthenium(II) and [Bis(diphenylphosphino)butane][bis(salicylaldehyde Thiosemicarbazonato)]ruthenium(II)

Reaction of RuCl₂(PPh₃)₃ with N‐Phenyl‐pyridine‐2‐carbaldehyde thiosemicarbazone (C₅H₄N–C²(H)=N³‐N²H–C¹(=S)N¹HC₆H₅, Hpytsc‐NPh) in presence of Et₃N base led to loss of ‐N²H‐proton and yielded the complex [Ru(pytsc‐NPh)₂(Ph₃P)₂] ( 1 ). Similar reactions of precursor RuCl₂[(p‐tolyl)₃P]₃ with a series of thiosemicarbazone ligands, viz. pyridine‐2‐carbaldehyde thiosemicarbazone (Hpytsc), salicylaldehyde thiosemicarbazone (H₂stsc), and benzaldehyde thiosemicarbazone (Hbtsc), have yielded the complexes, [Ru(pytsc)₂{(p‐tolyl)₃P}₂] ( 2 ), [Ru(Hstsc)₂{(p‐tolyl)₃P}]₂ ( 3 ), and [Ru(btsc)₂{(p‐tolyl)₃P}₂] ( 4 ), respectively. The reactions of precursor Ru₂Cl₄(dppb)₃ {dppb = Ph₂P–(CH₂)₄–PPh₂} with H₂stsc, Hbtsc, furan‐2‐carbaldehyde thiosemicarbazone (Hftsc) and thiophene‐2‐carbaldehyde thiosemicarbazone (Httsc) have formed complexes of the composition, [Ru(Hstsc)₂(dppb)] ( 5 ), [Ru(btsc)₂(dppb)] ( 6 ), [Ru(ftsc)₂(dppb)] ( 7 ), and [Ru(ttsc)₂(dppb)] ( 8 ). The complexes have been characterized by analytical data, IR, NMR (¹H, ³¹P) spectroscopy and X‐ray crystallography ( 1 and 5 ). The proton NMR confirmed loss of –N²H– proton in all the compounds, and ³¹P NMR spectra reveal the presence of equivalent phosphorus atoms in the complexes. In all the compounds, thiosemicarbazone ligands coordinate to the Ru^II atom via hydrazinic nitrogen (N²) and sulfur atoms. The arrangement around each metal atom is distorted octahedral with cis:cis:trans P, P:N, N:S, S dispositions of donor atoms.     

Metal Derivatives of 1,3‐Imidazolidine‐2‐thione with Divalent d10 Metal Ions (Zn–Hg) : Synthesis and Structures

Reactions of divalent Zn‐Hg metal ions with 1,3‐imidazolidine‐2‐thione (imdtH₂) in 1 : 2 molar ratio have formed monomeric complexes, [Zn(η¹‐S‐imdtH₂)₂(OAc)₂] ( 1 ), [Cd((η¹‐SimdtH₂)₂I₂] ( 2 ), [Cd(η¹‐S‐imdtH₂)₂Br₂] ( 3 ), and [Hg(η¹‐S‐imdtH₂)₂I₂] ( 4 ). Complexes 1 – 4 , have been characterized by elemental analysis (C, H, N), spectroscopy (IR, ¹H, NMR) and x‐ray crystallography ( 1 ‐ 4 ). Hydrogen bonding between oxygen of acetate and imino hydrogen of ligand, {N(2)–H(2C)···O(2)^#} in 1 , ring CH and imino hydrogen, {C(2A)–H(2A)···Br(2)^#} in 3 have formed H‐bonded dimers. Similarly, the interactions between molecular units of complexes 2 and 4 have yielded 2D polymers. The polymerization occurs via intermolecular interactions between thione sulfur and imino hydrogen, {N(2)–H(2)···S(1)^#}, imino hydrogen and the iodine atom, {NH(1)···I(2)^#} in 2 and imino hydrogen – iodine atom {N(2A)–H(2A)···I(2)} and I···I interaction in 4 . Crystal data: [Zn(η¹‐S‐imdtH₂)₂(OAc)₂] ( 1 ), C₁₀H₁₈N₄O₄S₂Zn, orthorhombic, Pbcn, a = 9.3854(7) Å, b = 12.4647(10) Å, c = 13.2263(11) Å; V = 1547.3(2) ų, Z = 4, R = 0.0280 [Cd((η¹‐S‐imdtH₂)₂I₂] ( 2 ), C₆H₁₂CdI₂N₄S₂, orthorhombic, Pnma, a = 13.8487(10) Å, b = 14.4232(11) Å, c = 7.0659(5) Å; Z = 4, V = 1411.36(18) ų, R = 0.0186.     

Complexes of N‐Thiophosphorylthiourea α‐NaphthylNHC(S)NHP(S)(OiPr)2 (HL) with Copper(I). Crystal Structures of HL and Cu(PPh3)2L

Reaction of the potassium salt of N‐thiophosphorylated thiourea α‐naphthylNHC(S)NHP(S)(OiPr)₂ ( HL ) with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to the mononuclear complex [Cu(PPh₃)₂L–S,S′]. By using copper(I) iodide instead ofCu(PPh₃)₃I, the polynuclear complex [Cu_n(L–S,S′)_n] was obtained. The structures of these compounds were investigated by elemental analysis, ¹H and ³¹P{¹H} NMR and IR spectroscopy. The crystal structures of HL and Cu(PPh₃)₂L were determined by single‐crystal X‐ray diffraction.     

A New Class of Remote N‐Heterocyclic Carbenes with Exceptionally Strong σ‐Donor Properties: Introducing Benzo[c]quinolin‐6‐ylidene

We make the case for benzo[c]quinolin‐6‐ylidene ( 1 ) as a strongly electron‐donating carbene ligand. The facile synthesis of 6‐trifluoromethanesulfonylbenzo[c]quinolizinium trifluoromethanesulfonate ( 2 ) gives straightforward access to a useful precursor for oxidative addition to low‐valent metals, to yield the desired carbene complexes. This concept has been achieved in the case of [Mn(benzo[c]quinolin‐6‐ylidene)(CO)₅]⁺ ( 15 ) and [Pd(benzo[c]quinolin‐6‐ylidene)(PPh₃)₂(L)]²⁺ L=THF ( 21 ), OTf ( 22 ) or pyridine ( 23 ). Attempts to coordinate to nickel result in coupling products from two carbene precursor fragments. The CO IR‐stretching‐frequency data for the manganese compound suggests benzo[c]quinolin‐6‐ylidene is at least as strong a donor as any heteroatom‐stabilised carbene ligand reported.     

Synthesis,characterization, and metal complexes of polyacetylenes with pendant 2,2′‐bipyridyl groups

5‐Ethynyl‐2,2′‐bipyridine ( 1 ; bpyC≡CH) polymerized in the presence of catalytic amounts of [RhF(COD)(PPh₃)] or [Rh(μ‐OH)(COD)]₂ (COD = 1,5‐cyclooctadiene) in 74–91% yields. In contrast, [Rh(μ‐X)(NBD)]₂ (X = Cl or OMe; NBD = norbornadiene) did not catalyze the polymerization of 1 or gave low yields of the polymer. The obtained polymer, poly(5‐ethynyl‐2,2′‐bipyridine) [ 2 ; (bpyC?CH)_n], was highly stereoregular with a predominant cis–transoidal geometry. Random copolyacetylenes containing the 2,2′‐bipyridyl group with improved solubility in organic solvents were obtained by the treatment of a mixture of 1 and phenylacetylene ( 3 ) or 1‐ethynyl‐4‐n‐pentyl‐benzene with catalytic amounts of [RhF(COD)(PPh₃)]. A block copolymer of 1 and 3 was prepared by the addition of 1 to a poly(phenylacetylene) containing a living end. The reaction of 2 with [Mo(CO)₆] produced an insoluble polymer containing [Mo(CO)₄(bpy)] groups, whereas with [RuCl₂(bpy)₂] or [Ru(bpy)₂(CH₃COCH₃)₂](CF₃SO₃)₂, it gave soluble metal–polymer complexes containing [Ru(bpy)₃]²⁺ groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:3167–3177, 2005     

Iron(II) and Nickel(II) Complexes of N‐Alkylimidazoles and 1‐Methyl‐1H‐1, 2, 4‐Triazole: X‐ray Studies,Magnetic Characterization,and DFT Calculations

Using the ligands N‐methylimidazole ( MeIm ), N‐ethylimidazole ( EtIm ), N‐propylimidazole ( PrIm ), and 1‐methyl‐1H‐1, 2, 4‐triazole ( MeTz ) three series with a total of 13 iron(II) complexes were isolated. The series comprise of the following complexes: (a) [Fe( MeIm )₆](ClO₄)₂ ( 1 ), [Fe( EtIm )₆](ClO₄)₂ ( 2 ), [Fe( PrIm )₆](ClO₄)₂( 3 ), [Fe( MeTz )₆](ClO₄)₂ ( 4 ), [Fe( MeIm )₆](MeSO₃)₂ ( 5 ), [Fe( EtIm )₆](MeSO₃)₂ ( 6 ), and [Fe( MeTz )₆](BF₄)₂ ( 10 ); (b) [Fe( MeIm )₄(MeSO₃)₂]( 7 ), [Fe( EtIm )₄(MeSO₃)₂] ( 8 ), and [Fe( PrIm )₄(MeSO₃)₂] ( 9 ); (c) [Fe( MeIm )₄(NCS)₂] ( 15 ), [Fe( EtIm )₄(NCS)₂] ( 16 ), and [Fe( MeTz )₄(NCS)₂] ( 17 ). Single crystal X‐ray diffraction studies were performed on 7 – 10 and 15 – 17 . Temperature dependent magnetic susceptibility measurements were performed on selective examples of all series, and confirmed them to be in the HS state over the range 6–300 K. DFT calculations were performed at BP86/def‐SV(P) and TPSSh/def2‐TZVPP level on all [Fe L ₆]²⁺ complex cations and the neutral complexes 7 – 9 and 15 – 17 . Additionally the four homoleptic nickel(II) complexes [Ni L ₆](ClO₄)₂ ( 11 : L = MeIm ; 12 : L = EtIm ; 13 : L = PrIm ; 14 : L = MeTz ) were synthesized and compounds 11 – 13 structurally characterized. UV/Vis/NIR spectroscopic measurements were carried out on all homoleptic iron(II) and nickel(II) complexes. The 10Dq values were determined to be in the range of 11547–11574 and 10471–10834 cm^–1 for the iron(II) and nickel(II) complexes, respectively.     

Zur Reaktivität von dinuklearen Platina‐β‐diketonen gegenüber Phosphanen: Diacetylplatin(II)‐Komplexe und mononukleare Platina‐β‐diketone

The Reactivity of Dinuclear Platina‐β‐diketones with Phosphines: Diacetylplatinum(II) Complexes and Mononuclear Platina‐β‐diketones Addition of mono‐ and bidentate phosphines or of AsPh₃ to the platina‐β‐diketone [Pt₂{(COMe)₂H}₂(μ‐Cl)₂] ( 1 ) followed by the addition of NaOMe at ?70 °C resulted in the formation of diacetyl platinum(II) complexes cis‐[Pt(COMe)₂L₂] (L = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; PPh₂(4‐py), 2c ; PMePh₂, 2d ; AsPh₃, 2d ) and [Pt(COMe)₂(L??L)] (L??L = dppe, 3b ; dppp, 3c ), respectively. The analogous reaction with dppm afforded the dinuclear complex cis‐[{Pt(COMe)₂}₂(μ‐dppm)₂] ( 4 ) that reacted in boiling acetone yielding [Pt(COMe)₂(dppm)] ( 3a ). The reactions 1 → 2 / 3 were found to proceed via thermally highly unstable cationic mononuclear platina‐β‐diketone intermediates [Pt{(COMe)₂H}L₂]⁺ and [Pt{(COMe)₂H}(L??L)]⁺, respectively, that could be isolated as chlorides for L??L = dppe ( 5a ) and dppp ( 5b ). The reversibility of the deprotonation of type 5 complexes with NaOMe yielding type 3 complexes was shown by the protonation of the diacetyl complex 3b with HBF₄ yielding the platina‐β‐diketone [Pt{(COMe)₂H}(dppe)](BF₄) ( 5c ). All compounds were fully characterized by means of NMR and IR spectroscopies, and microanalyses. X‐ray diffraction analysis was performed for the complex cis‐[Pt(COMe)₂(PPh₃)₂]·H₂O·CHCl₃ ( 2a ·H₂O·CHCl₃).     

Pyrrole‐2‐carbaldehyde Thiosemicarbazonates of Nickel(II) and Palladium(II): Synthesis,Structure, and Spectroscopy

Complexes of pyrrole‐2‐carbaldehyde thiosemicarbazones, [(C₄H₄N⁴)(H)C²=N³–N²(H)–C¹(=S)–N¹HR; R = Ph, H₂L¹; Me, H₂L²; H, H₂L³] with nickel(II) and palladium(II) are described. The reaction of nickel(II) acetate with H₂L¹ in methanol in 1:1 molar ratio yielded a complex of composition, [Ni(κ²‐N³,S‐HL¹)₂] ( 1 ). Likewise reaction of NiCl₂ with H₂L² in 1:1 molar ratio in acetonitrile in the presence of triethylamine base followed by the addition of pyridine did not yield the anticipated [Ni(κ³‐N⁴,N³,S‐L²)(py)] complex, moreover a bis‐square‐planar complex, [Ni(κ²‐N³,S‐HL²)₂] ( 2 ) was formed. However, in the presence of bipyridine (bipy), it yielded the addition product, [Ni(κ²‐N³,S‐HL²)₂(κ²‐N, N‐bipy)] ( 3 ). Reaction of PdCl₂(κ²‐P, P–PPh₂–CH₂–PPh₂) with H₂L³ in toluene in the presence of triethylamine has yielded a complex of stoichiometry, [Pd(κ³‐N⁴,N³,S–L³)(κ¹‐P–PPh₂–CH₂–P(O)Ph₂] ( 4 ). The ligands (HL¹)^– and (HL²)^– are chelating to Ni^II metal atom as anions binding through N³,S‐donor atoms with pendant pyrrole groups, and (L³)^2– is chelating to the Pd^II metal atom as dianion through N⁴,N³,S‐donor atoms (pyrrole is N⁴‐bonded). Fourth site in 4 is bonded to one P‐donor atom of PPh₂–CH₂–P(O)Ph₂, whose pendant –PPh₂ group involves auto oxidation to –P(O)PPh₂ during reaction. These complexes were characterized using analytical data, IR, NMR (¹H, ³¹P) spectroscopy and X‐ray crystallography. Complexes 1 , 2 , and 4 have square‐planar arrangement, whereas complex 3 is octahedral.     

Synthesis and Reactivity of Phenylimidorhenium(V) Complexes with N‐[(N′,N′‐Dialkylamino)(thiocarbonyl)]benzamidines. Observation of a pH‐Dependent Isomerisation of Related Oxorhenium(V) Compounds

Reactions of [Re(NPh)Cl₃(PPh₃)₂] with N‐[(N′,N′‐dialkylamino)(thiocarbonyl)]benzamidines (H₂R₂tcb) (R₂ = Et₂, (CH₂)₂O(CH₂)₂) in methanol give mono‐chelates of the composition [Re(NPh)Cl₂(PPh₃)(HR₂tcb)] as the sole products independent of the amount of the added H₂R₂tcb. Addition of a supporting base such as NEt₃ results in hydrolysis of the Re=NPh bonds and partial hydrolysis of the thiocarbamoylbenzamidines. Orange‐brown, cationic oxorhenium(V) compounds of the formula [ReO(HR₂tcb)₂]Cl were isolated from such reaction mixtures in good yields, and the formation of small amount of the unusual sulfido/persulfido‐bridged Re^V dimer [{ReO(HEt₂tcb)}₂(μ‐S)(μ‐S₂)] give evidence for a considerable degree of ligand decomposition under such conditions. The products have been characterized by spectroscopic methods and X‐ray crystallography. Acidification of orange‐brown solutions of the five‐coordinate Re^V oxo complex [ReO(HEt₂tcb)₂]Cl causes an immediate change of the color and deep blue crystals of the neutral, six‐coordinate [ReOCl(HEt₂tcb)₂] can be isolated from the resulting mixture. Alternatively, the product can be prepared by a ligand‐exchange protocol starting from (NBu₄)[ReOCl₄] and H₂Et₂tcb. The pH‐dependent isomerization between [ReO(HEt₂tcb)₂]Cl and [ReOCl(HEt₂tcb)₂] is reversible.     

Syntheses and Structures of Nitridorhenium(V) and Nitridotechnetium(V) Complexes with N,N‐[(Dialkylamino)(thiocarbonyl)]‐N′‐(2‐hydroxyphenyl)benzamidines

[MNCl₂(PPh₃)₂] complexes (M = Re, Tc) react with N‐[(dialkylamino)(thiocarbonyl)]‐N′‐(2‐hydroxyphenyl)benzamidines (H₂L¹) with formation of neutral, five‐coordinate nitrido complexes of the composition [MN(L¹)(PPh₃)]. The products have distorted square‐pyramidal coordination spheres with each a tridentate, double‐deprotonated benzamidine and a PPh₃ ligand in their basal planes.