Non‐oxidized graphene/elastomer composite films for wearable strain and pressure sensors with ultra‐high flexibility and sensitivity

It remains challenging to prepare wearable strain and pressure sensors with excellent mechanical properties, ultra‐high flexibility and sensitivity. Electrically conductive graphene platelets (GnPs) with high structural integrity are used in making a composite film fabricated using robust fabrication techniques. The gauge factor for the strain is up to 100 at 0%‐5% strain and 50 at 5%‐30% strain, and the sensitivity to pressure is 2.7×10^‐2 kPa^‐1 between 0 and 10 kPa and 1.5×10^‐4 kPa^‐1 between 300 and 1000 kPa. In addition, the flexible sensor demonstrates good repeatability and durability after 1000 cycles of tensile and compression tests. The flexible sensor has fast response ability and a wide operating temperature range, suggesting the excellent response to temperature. The flexible sensor is applied in monitoring several human motions as a wearable device with high accuracy. The ability to detect strain, pressure and temperature of the flexible sensor extends its applications to multifunctional wearable devices.     

Droplet-based interfacial capacitive sensing

This paper presented a novel droplet-based pressure sensor using elastic and capacitive electrode-electrolyte interfaces to achieve ultrahigh mechanical-to-electrical sensitivity (1.58 μF kPa(-1)) and resolution (1.8 Pa) with a simple device architecture. The miniature transparent droplet sensors, fabricated by one-step laser micromachining, consisted of two flexible polymer membranes with conductive coating and a separation layer hosting a sensing chamber for an electrolyte droplet. The sensing principle primarily relied on high elasticity of the sensing droplet and large capacitance presented at the electrode-electrolyte interface. A simple surface modification scheme was introduced to the conductive coating, which reduced hysteresis of the droplet deformation without substantially compromising the interfacial capacitance. Moreover, the major concern of liquid evaporation was addressed by a mixture of glycerol and electrolyte with long-term stability in a laboratory environment. Theoretical analyses and experimental investigations on several design parameters (i.e., the dimensions of the sensing chamber and the droplet size) were thoroughly conducted to characterize and optimize the overall sensitivity of the device. Moreover, the environmental influences (e.g., temperature and humidity) on the capacitive measurement were further investigated. Finally, the simply constructed and mechanically flexible droplet sensor was successfully applied to detect minute blood pressure variations on the skin surface (with the maximum value less than 100 Pa) throughout cardiovascular cycles.     

Single Conducting Polymer Nanowire Based Sequence‐Specific,Base‐Pair‐Length Dependant Label‐free DNA Sensor

We have fabricated a highly sensitive, simple and label‐free single polypyrrole (Ppy) nanowire based conductometric/chemiresistive DNA sensor. The fabrication was optimized in terms of probe DNA sequence immobilization using a linker molecule and using gold‐thiol interaction. Two resultant sensor designs working on two different sensing mechanisms (gating effect and work function based sensors) were tested to establish reliable sensor architecture with higher sensitivity and device‐to‐device reproducibility. The utility of the work function based configuration was demonstrated by detecting 19 base pair (bp) long breast cancer gene sequence with single nucleotide polymorphism (SNP) discrimination with high sensitivity, lower detection limit of ∼10⁻¹⁶ M and wide dynamic range (∼10⁻¹⁶ to 10⁻¹¹ M) in a small sample volume (30 µL). To further demonstrate the utility of the DNA sensor for detection of target sequences with different number of bases, targets with 21 and 36 bases were detected. These sequences have implications in environmental sample analysis or metagenomics. Sensor response showed increase with the number of bases in the target sequence. For long sequence (with 36 bases), effect of DNA alignment on sensor performance was studied.     

Flexible hybrid eu3+ doped P(VDF‐HFP) nanocomposite film possess hypersensitive electronic transitions and piezoelectric throughput

A novel red light‐emitter made of Eu³⁺ doped self‐poled electroactive poly(vinylidene fluoride–hexafluoropropylene) [P(VDF‐HFP)] hybrid nanocomposite film possesses piezoelectric throughput that is suitable for flexible piezoelectric nanogenerator (PNG) fabrication. We observed that PNG is enabled to generate an open‐circuit voltage of 5 V and 0.35 μA of short‐circuit current under an applied pressure amplitude of ～10.4 kPa. By simple mechanical energy scavenging, PNG demonstrates an ability to light more than ten blue commercial light emitting diodes instantly, without using an energy‐storage device. Additionally, it successfully charges up capacitors by simple repeating finger touch motion, which indicates its potency as an efficient energy harvesting power source. The high performance of PNG is due to well‐coated Eu³⁺ with P(VDF‐HFP) in a hybrid nanocomposite so it displays improved dielectric permittivity and energy storage capacity. This flexible composite film also possesses a hypersensitive electronic transition as it responds by an intense red light‐emission confirmed by the CIE 1931 chart. This enables applications in piezo‐photonics as a high‐performance, energy‐saving, flexible solid‐state red light emitter. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2335–2345.     

Length‐Dependent Charge Generation from Vertical Arrays of High‐Aspect‐Ratio ZnO Nanowires

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free‐standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high‐aspect‐ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.     

SnOx thin films with tunable conductivity for fabrication of p–n homo‐junction

Tin oxide (SnO_x) has been widely used for the fabrication of transparent and flexible devices because of its excellent optical and electronic properties. In this work, we established a methodology for the synthesis of SnO_x thin films with p‐type and n‐type tunable conductivity by direct currecnt (DC) magnetron sputtering. The SnO_x thin films changed from p‐type to n‐type by increasing the relative oxygen partial pressure (ppO₂) from 4.8% to 18.5% and by varying the working pressure between 1.8 and 2.5 mTorr. The SnO_x thin films were annealed at 160°C, 180°C, and 200°C for 30 min to promote the formation of the desired crystalline structures. At the annealing temperature of 180°C in air ambient, the SnO_x thin films showed a tetragonal structure with Sn traces. Having found the optimal conditions, we deposited both types of SnO_x thin films with the same tetragonal structure and similar chemical stoichiometry. Also, the conditions to obtain thin films with the highest mobility values for p‐type (1.10 cm²/Vs) and n‐type (22.20 cm²/Vs) were used for fabricating the device. Finally, the implementation of a SnO_x‐based p–n diode was demonstrated using transparent SnO_x thin films developed in this work, illustrating their potential use in transparent electronics.     

Fast-response piezoresistive pressure sensor based on polyaniline cotton fabric for human motion monitoring

Wearable flexible sensors with quick response time and high stability are required in the fields of human motion detection, personal health monitoring, and artificial electronic skin. However, their design remains a challenge. To address this need, we fabricate a piezoresistive sensor with a wide detection limit, fast response time, and excellent stability in this work. Nickel (Ni) and copper (Cu) films are deposited on cotton fabric (CF) by in-situ polymerization of polyaniline (PANI) using magnetic filtration cathode vacuum arc deposition technology to obtain copper/polyaniline cotton (Cu/PANI/CF) and nickel/polyaniline cotton (Ni/PANI/CF). The pressure sensor is then fabricated by self-assembly. The proposed pressure sensor has a wide detection limit (0–180 kPa), rapid response time (30 ms), high cycle stability (>5000), and can detect the movement of each joint of the human body (such as the knee, finger, elbow, etc.). The sensor can also monitor different facial micro-expressions, including smiles and blinking. Based on the practical application of human motion signals and the detection of subtle stress, the proposed sensor demonstrates significant potential as a wearable electronic product for health monitoring.

Graphical abstract

     

Highly flexible pseudocapacitor based on freestanding heterogeneous MnO2/conductive polymer nanowire arrays

Flexible electronics such as wearable electronic clothing, paper-like electronic devices, and flexible biomedical diagnostic devices are expected to be commercialized in the near future. Flexible energy storage will be needed to power these devices. Supercapacitor devices based on freestanding nanowire arrays are promising high power sources for these flexible electronics. Electrodes for these supercapacitor devices consisting of heterogeneous coaxial nanowires of poly (3,4-ethylenedioxythiophene) (PEDOT)-shell and MnO(2)-core materials have been shown in a half cell system to have improved capacitance and rate capabilities when compared to their pure nanomaterials; however, their performance in a full cell system has not been fully investigated. Herein, these coaxial nanowires are tested in both a symmetric and an asymmetric (utilizing a PEDOT nanowire anode) full cell configuration in the aspect of charge storage, charge rate, and flexibility without using any carbon additives and polymer binders. It is found that the asymmetric cell outperforms the symmetric cell in terms of energy density, rate capability, and cycle ability. The asymmetric device's electrode materials display an energy density of 9.8 Wh/kg even at a high power density of 850 W kg(-1). This device is highly flexible and shows fast charging and discharging while still maintaining 86% of its energy density even under a highly flexed state. The total device is shown to have a total capacitance of 0.26 F at a maximum voltage of 1.7 V, which is capable of providing enough energy to power small portable devices.     

A Lightweight Polymer Solar Cell Textile that Functions when Illuminated from Either Side

An all‐solid‐state, lightweight, flexible, and wearable polymer solar cell (PSC) textile with reasonable photovoltaic performance has been developed. A metal textile electrode made from micrometer‐sized metal wires is used as the cathode, and the surfaces of the metal wires are dip‐coated with the photoactive layers. Two ultrathin, transparent, and aligned carbon nanotube sheets that exhibit remarkable electronic and mechanical properties were coated onto the modified metal textile at both sides as the anode to produce the desired PSC textile. Because of the designed sandwich structure, the PSC textile displays the same energy conversion efficiencies regardless of which side it is irradiated from. As expected, the PSC textiles are highly flexible, and their energy conversion efficiencies varied by less than 3 % after bending for more than 200 cycles. The PSC textile shows an areal density (5.9 mg cm^?2) that is lower than that of flexible film‐based PSCs (31.3 mg cm^?2).     

Synthesis of Pd nanowire networks by a simple template-free and surfactant-free method and their application in formic acid electrooxidation

A large volume of Pd nanowire networks with lengths of a few tens of nanometers are synthesized successfully by the inherent self-assembly process with the stabilizing effect of sodium citrate. The Pd nanowire networks exhibit a superior electrocatalytic activity for formic acid oxidation. The specific area activities of Pd nanowire at 0.1 V calculated from the forward-scan currents were 1.38 mA cm^?2, which is 97% higher than that obtained from Pd nanoparticle or peanut-like structures (0.70 mA cm^?2). The mechanism of the significant enhancement of the catalytic activity of Pd nanowire network can be due to the unique surface characteristics and effective electronic conduction path within the Pd nanowire networks.     

Manipulating Nanowire Assembly for Flexible Transparent Electrodes

Manipulating nanowire assembly could help the design of hierarchical structures with unique functionalities. Herein, we first report a facile solution‐based process under ambient conditions for co‐assembling two kinds of nanowires which have suitable composition and functionalities, such as Ag and Te nanowires, for the fabrication of flexible transparent electrodes. Then Te nanowires can be etched away easily, leaving Ag nanowire networks with controllable pitch. By manipulating the assembly of Ag and Te nanowires, we can precisely tailor and balance the optical transmittance and the conductivity of the resulting flexible transparent electrodes. The network of Ag nanowires which have tunable pitch forms a flexible transparent conducting electrode with an averaged transmission of up to 97.3 % and sheet resistances as low as 2.7 Ω/sq under optimized conditions. The work provides a new way for tailoring the properties of nanowire‐based devices.     

Fabrication of highly catalytic silver nanoclusters/graphene oxide nanocomposite as nanotag for sensitive electrochemical immunoassay

Silver nanoclusters and graphene oxide nanocomposite (AgNCs/GRO) is synthesized and functionalized with detection antibody for highly sensitive electrochemical sensing of carcinoembryonic antigen (CEA), a model tumor marker involved in many cancers. AgNCs with large surface area and abundant amount of low-coordinated sites are synthesized with DNA as template and exhibit high catalytic activity towards the electrochemical reduction of H₂O₂. GRO is employed to assemble with AgNCs because it has large specific surface area, super electronic conductivity and strong π-π stacking interaction with the hydrophobic bases of DNA, which can further improve the catalytic ability of the AgNCs. Using AgNCs/GRO as signal amplification tag, an enzyme-free electrochemical immunosensing protocol is designed for the highly sensitive detection of CEA on the capture antibody functionalized immunosensing interface. Under optimal conditions, the designed immunosensor exhibits a wide linear range from 0.1 pg mL⁻¹ to 100 ng mL⁻¹ and a low limit of detection of 0.037 pg mL⁻¹. Practical sample analysis reveals the sensor has good accuracy and reproducibility, indicating the great application prospective of the AgNCs/GRO in fabricating highly sensitive immunosensors, which can be extended to the detection of various kinds of low abundance disease related proteins.     

Correlation between Oxygen Uptake and Carbonyl Formation in Polyethylene Oxidation

The ratio of absorbed O₂ and carboxyl groups formed was studied in LDPE oxidation. It was found that this ratio is independent of the reaction conditions in a wide range (20–100 kPa O₂ pressure, 90–160°C, and thickness of 20–1170 μm). If the pressure of O₂ was 2.7 kPa, less - COOH formed. A semiempirical mathematic equation was constructed to describe the relation between the acid content and oxygen consumption.     

基于银纳米线复合透明电极的可弯折柔性聚合物太阳能电池

本文设计了一种可以通过刮涂方法制备的基于银纳米线(AgNWs)的柔性复合透明电极,并以此为基础实现了高性能柔性聚合物太阳能电池的制备。 基于银纳米线的柔性复合薄膜(APA)由银纳米线(AgNWs),聚乙烯醇缩丁醛(PVB)和铝掺杂氧化锌(AZO)纳米粒子在低温下通过多层刮涂的方法制备。 APA透明复合薄膜在550 nm处透光率达到90.90%,面电阻低至13.01 Ω/sq,在柔性基底上具有很高的粘附性。 在透明的APA/聚对苯二甲酸乙二醇酯(PET)基底上制备的柔性聚合物太阳能电池(PSCs),能量转换效率达到5.47%。 而且以5 mm为曲率半径,经过1000次循环弯曲实验,电池的能量转换效率仅下降了14%。     

高活性、低载量的PtCo/C质子交换膜燃料电池催化剂的合成

利用逐步合成的方法,合成了一系列不同量硝酸处理的PtCo/C催化剂。通过燃料电池测试装置对催化剂进行了测试,结果表明PtCo/C催化剂在较低载量情况下,有着很好的性能：在50 kPa背压下,0.9 V下的电流密度达到44 mA·cm^-2,0.8 V下的电流密度超过300 mA·cm^-2;200 kPa背压下,最高功率密度超过1 300 mW·cm^-2。通过X射线衍射（XRD）、透射电子显微镜（TEM）对合成的PtCo/C催化剂的形貌、组成进行了表征。XRD结果表明,催化剂中,Pt以Pt₃Co和Pt颗粒形式存在。燃料电池测试结果表明,这一系列的催化剂中,经2 mL质量分数65%的浓硝酸配制的水溶液处理过的PtCo/C催化剂,具有最好的燃料电池性能以及良好的稳定性。     

Flexible lithium metal capacitors enabled by an in situ prepared gel polymer electrolyte

The rapid development of next-generation flexible electronics stimulates the growing demand for flexible and wearable power sources with high energy density. Li metal capacitor (LMC), combining with a Li metal anode and an activated carbon cathode, exhibits extremely high energy density and high power density due to the unique energy storage mechanism, thus showing great potential for powering wearable electronic devices. Herein, a flexible LMC based on an in situ prepared PETEA-based gel polymer electrolyte (GPE) was reported for the first time. Owing to the high ionic conductivity of PETEA-based GPE (5.75 × 10⁻³ S/cm at 20 °C), the assembled flexible LMC delivers a high capacitance of 210 F/g at 0.1 A/g within the voltage range from 1.5 V to 4.3 V vs. Li/Li⁺, a high energy density of 474 Wh/kg at 0.1 A/g and a high power density of 29 kW/kg at 10 A/g. More importantly, PETEA-based GPE endows the LMC with excellent flexibility and safety, which could work normally under abuse tests, such as bending, nail penetration and cutting. The in situ prepared PETEA-based GPE simplifies the fabrication process, avoids the risk of leakage and inhibits the growth of Li dendrite, making LMC a promising flexible energy storage device for the flexible electronic field.     

Transparent Electrodes Printed with Nanocrystal Inks for Flexible Smart Devices

Transparent electrodes (TEs) are crucial in a wide range of modern electronic and optoelectronic devices. However, traditional TEs cannot meet the requirements of smart devices under development in unique fields, such as electronic skins, wearable electronics, robotic skins, flexible and stretchable displays, and solar cells. Emerging TEs printed with nanocrystal (NC) inks are inexpensive and compatible with solution processes, and have huge potential in flexible, stretchable, and wearable devices. Every development in ink‐based electrodes makes them more competitive for practical applications in various smart devices. Herein, we provide an overview of emergent ink‐based electrodes, such as transparent conducting oxides, metal nanowires, graphene, and carbon nanotubes, and their application in solution‐based flexible and stretchable devices.     

Inorganic oxide core, polymer shell nanocomposite as a high K gate dielectric for flexible electronics applications

Organic/inorganic core shell nanoparticles have been synthesized using high K TiO(2) as the core nanoparticle, and polystyrene as the shell. This material is easy to process and forms transparent continuous thin films, which exhibit a dielectric constant enhancement of over 3 times that of bulk polystyrene. This new dielectric material has been incorporated into capacitors and thin film transistors (TFTs). Mobilities approaching 0.2 cm(2)/V.s have been measured for pentacene TFTs incorporating the new TiO(2) polystyrene nanostructured gate dielectric, indicating good surface properties for pentacene film growth. This novel strategy for generating high K flexible gate dielectrics will be of value in improving organic and flexible electronic device performance.     

Highly Catalytic Carbon Nanotube/Pt Nanohybrid‐Based Transparent Counter Electrode for Efficient Dye‐Sensitized Solar Cells

Low‐cost transparent counter electrodes (CEs) for efficient dye‐sensitized solar cells (DSSCs) are prepared by using nanohybrids of carbon nanotube (CNT)‐supported platinum nanoparticles as highly active catalysts. The nanohybrids, synthesized by an ionic‐liquid‐assisted sonochemical method, are directly deposited on either rigid glass or flexible plastic substrates by a facile electrospray method for operation as CEs. Their electrochemical performances are examined by cyclic voltammetry, current density–voltage characteristics, and electrochemical impedance spectroscopy (EIS) measurements. The CNT/Pt hybrid films exhibit high electrocatalytic activity for I^?/I₃^? with a weak dependence on film thickness. A transparent CNT/Pt hybrid CE film about 100 nm thick with a transparency of about 70 % (at 550 nm) can result in a high power conversion efficiency (η) of over 8.5 %, which is comparable to that of pyrolysis platinum‐based DSSCs, but lower cost. Furthermore, DSSC based on flexible CNT/Pt hybrid CE using indium‐doped tin oxide‐coated polyethylene terephthalate as the substrate also exhibits η=8.43 % with J_sc=16.85 mA cm^?2, V_oc=780 mV, and FF=0.64, and this shows great potential in developing highly efficient flexible DSSCs.     

Skin‐worn Soft Microfluidic Potentiometric Detection System

A flexible skin‐mounted microfluidic potentiometric device for simultaneous electrochemical monitoring of sodium and potassium in sweat is presented. The wearable device allows efficient natural sweat pumping to the potentiometric detection chamber, containing solid‐contact ion‐selective Na⁺ and K⁺ electrodes, during exercise activity. The fabricated microchip electrolyte‐sensing device displays good analytical performance and addresses sweat mixing and carry‐over issues of early epidermal potentiometric sensors. Such soft skin‐worn microchip platform integrates potentiometric measurement, microfluidic technologies with flexible electronics for real‐time wireless data transmission to mobile devices. The new fully integrated microfluidic electrolyte‐detection device paves the way for practical fitness and health monitoring applications.