Catalytic Metallopolymers from [2Fe‐2S] Clusters: Artificial Metalloenzymes for Hydrogen Production

Reviewed herein is the development of novel polymer‐supported [2Fe‐2S] catalyst systems for electrocatalytic and photocatalytic hydrogen evolution reactions. [FeFe] hydrogenases are the best known naturally occurring metalloenzymes for hydrogen generation, and small‐molecule, [2Fe‐2S]‐containing mimetics of the active site (H‐cluster) of these metalloenzymes have been synthesized for years. These small [2Fe‐2S] complexes have not yet reached the same capacity as that of enzymes for hydrogen production. Recently, modern polymer chemistry has been utilized to construct an outer coordination sphere around the [2Fe‐2S] clusters to provide site isolation, water solubility, and improved catalytic activity. In this review, the various macromolecular motifs and the catalytic properties of these polymer‐supported [2Fe‐2S] materials are surveyed. The most recent catalysts that incorporate a single [2Fe‐2S] complex, termed single‐site [2Fe‐2S] metallopolymers, exhibit superior activity for H₂ production.     

Bioinspired catalysis at the crossroads between biology and chemistry: A remarkable example of an electrocatalytic material mimicking hydrogenases

There is an increasing need for new, efficient and cheap chemical catalysts, as part of the emerging “green” chemistry field. Living organisms provide a wealth of fascinating enzymes, with exceptional catalytic efficiencies and selectivities, which can be either directly exploited in biotechnological synthetic systems or imitated by chemists. The bioinspired catalysis approach exploits the basic chemical principles on which a biological enzyme active site is built in order to generate original functional analogs of this site. This is illustrated here with a molecular electrode material inspired from hydrogenases, metalloenzymes involved in hydrogen metabolism, and displaying exceptional electrocatalytic properties for hydrogen production and oxidation, thus with potential applications for electrolyzer and fuel cell technologies.     

Biosynthetic Approaches towards the Design of Artificial Hydrogen-Evolution Catalysts

Hydrogen is a clean and sustainable form of fuel that can minimize our heavy dependence on fossil fuels as the primary energy source. The need of finding greener ways to generate H₂ gas has ignited interest in the research community to synthesize catalysts that can produce H₂ by the reduction of H⁺. The natural H₂ producing enzymes hydrogenases have served as an inspiration to produce catalytic metal centers akin to these native enzymes. In this article we describe recent advances in the design of a unique class of artificial hydrogen evolving catalysts that combine the features of the active site metal(s) surrounded by a polypeptide component. The examples of these biosynthetic catalysts discussed here include i) assemblies of synthetic cofactors with native proteins; ii) peptide-appended synthetic complexes; iii) substitution of native cofactors with non-native cofactors; iv) metal substitution from rubredoxin; and v) a reengineered Cu storage protein into a Ni binding protein. Aspects of key design considerations in the construction of these artificial biocatalysts and insights gained into their chemical reactivity are discussed.     

Synergistic Metal-Nonmetal Active Sites in a Metal-Organic Cage for Efficient Photocatalytic Synthesis of Hydrogen Peroxide in Pure Water

Photocatalytic synthesis of hydrogen peroxide (H₂O₂) is a potential clean method, but the long distance between the oxidation and reduction sites in photocatalysts hinders the rapid transfer of photogenerated charges, limiting the improvement of its performance. Here, a metal-organic cage photocatalyst, Co₁₄(L−CH₃)₂₄ , is constructed by directly coordinating metal sites (Co sites) used for the O₂ reduction reaction (ORR) with non-metallic sites (imidazole sites of ligands) used for the H₂O oxidation reaction (WOR), which shortens the transport path of photogenerated electrons and holes, and improves the transport efficiency of charges and activity of the photocatalyst. Therefore, it can be used as an efficient photocatalyst with a rate of as high as 146.6 μmol g⁻¹ h⁻¹ for H₂O₂ production under O₂-saturated pure water without sacrificial agents. Significantly, the combination of photocatalytic experiments and theoretical calculations proves that the functionalized modification of ligands is more conducive to adsorbing key intermediates (*OH for WOR and *HOOH for ORR), resulting in better performance. This work proposed a new catalytic strategy for the first time; i.e., to build a synergistic metal-nonmetal active site in the crystalline catalyst and use the host–guest chemistry inherent in the metal-organic cage (MOC)to increase the contact between the substrate and the catalytically active site, and finally achieve efficient photocatalytic H₂O₂ synthesis.     

Evidence of Sulfur Non-Innocence in [CoII(dithiacyclam)]2+-Mediated Catalytic Oxygen Reduction Reactions

In many metalloenzymes, sulfur-containing ligands participate in catalytic processes, mainly via the involvement in electron transfer reactions. In a biomimetic approach, we now demonstrate the implication of S-ligation in cobalt mediated oxygen reduction reactions (ORR). A comparative study between the catalytic ORR capabilities of the four-nitrogen bound [Co(cyclam)]²⁺ ( 1 ; cyclam=1,5,8,11-tetraaza-cyclotetradecane) and the S-containing analog [Co(S₂N₂-cyclam)]²⁺ ( 2 ; S₂N₂-cyclam=1,8-dithia-5,11-diaza-cyclotetradecane) reveals improved catalytic performance once the chalcogen is introduced in the Co coordination sphere. Trapping and characterization of the intermediates formed upon dioxygen activation at the Co^II centers in 1 and 2 point to the involvement of sulfur in the O₂ reduction process as the key for the improved catalytic ORR capabilities of 2 .     

Infrared Spectroscopy During Electrocatalytic Turnover Reveals the Ni‐L Active Site State During H2 Oxidation by a NiFe Hydrogenase

A novel in situ IR spectroscopic approach is demonstrated for the characterization of hydrogenase during catalytic turnover. E. coli hydrogenase 1 (Hyd‐1) is adsorbed on a high surface‐area carbon electrode and subjected to the same electrochemical control and efficient supply of substrate as in protein film electrochemistry during spectral acquisition. The spectra reveal that the active site state known as Ni‐L, observed in other NiFe hydrogenases only under illumination or at cryogenic temperatures, can be generated reversibly in the dark at ambient temperature under both turnover and non‐turnover conditions. The observation that Ni‐L is present at all potentials during turnover under H₂ suggests that the final steps in the catalytic cycle of H₂ oxidation by Hyd‐1 involve sequential proton and electron transfer via Ni‐L. A broadly applicable IR spectroscopic technique is presented for addressing electrode‐adsorbed redox enzymes under fast catalytic turnover.     

New perspectives in hydrogenase direct electrochemistry

Electrochemical studies of hydrogenases, the biological catalysts of H₂ oxidation and production, have proven wrong the old saying that enzymes do not easily transfer electrons to electrodes in the absence of mediators. Many distinct hydrogenases have actually been directly connected to electrodes or particles, for studying their catalytic mechanism or for designing solar-fuels catalysts. In this review, we list the electrodes that have proved successful for direct electron transfer to hydrogenases, and we discuss recent results which illustrate new directions in this research field: the study of the biosynthesis of FeFe hydrogenase, the electrochemical characterization of non-standard NiFe or FeFe hydrogenases, the general discussion of what makes a catalyst better in one particular direction of the reaction, and the elucidation of the molecular mechanisms of hydrogenase catalysis by combining electrochemistry and theoretical chemistry, spectroscopy or photochemistry. The electrochemical methods described herein will probably prove useful for studying or using other redox enzymes.     

Molecular Details on Multiple Cofactor Containing Redox Metalloproteins Revealed by Infrared and Resonance Raman Spectroscopies

Vibrational spectroscopy and in particular, resonance Raman (RR) spectroscopy, can provide molecular details on metalloproteins containing multiple cofactors, which are often challenging for other spectroscopies. Due to distinct spectroscopic fingerprints, RR spectroscopy has a unique capacity to monitor simultaneously and independently different metal cofactors that can have particular roles in metalloproteins. These include e.g., (i) different types of hemes, for instance hemes c, a and a₃ in caa₃-type oxygen reductases, (ii) distinct spin populations, such as electron transfer (ET) low-spin (LS) and catalytic high-spin (HS) hemes in nitrite reductases, (iii) different types of Fe-S clusters, such as 3Fe-4S and 4Fe-4S centers in di-cluster ferredoxins, and (iv) bi-metallic center and ET Fe-S clusters in hydrogenases. IR spectroscopy can provide unmatched molecular details on specific enzymes like hydrogenases that possess catalytic centers coordinated by CO and CN⁻ ligands, which exhibit spectrally well separated IR bands. This article reviews the work on metalloproteins for which vibrational spectroscopy has ensured advances in understanding structural and mechanistic properties, including multiple heme-containing proteins, such as nitrite reductases that house a notable total of 28 hemes in a functional unit, respiratory chain complexes, and hydrogenases that carry out the most fundamental functions in cells.     

Cofactor composition and function of a H2-sensing regulatory hydrogenase as revealed by M?ssbauer and EPR spectroscopy

The regulatory hydrogenase (RH) from Ralstonia eutropha H16 acts as a sensor for the detection of environmental H₂ and regulates gene expression related to hydrogenase-mediated cellular metabolism. In marked contrast to prototypical energy-converting [NiFe] hydrogenases, the RH is apparently insensitive to inhibition by O₂ and CO. While the physiological function of regulatory hydrogenases is well established, little is known about the redox cycling of the [NiFe] center and the nature of the iron–sulfur (FeS) clusters acting as electron relay. The absence of any FeS cluster signals in EPR had been attributed to their particular nature, whereas the observation of essentially only two active site redox states, namely Ni-SI and Ni-C, invoked a different operant mechanism. In the present work, we employ a combination of Mössbauer, FTIR and EPR spectroscopic techniques to study the RH, and the results are consistent with the presence of three [4Fe–4S] centers in the small subunit. In the as-isolated, oxidized RH all FeS clusters reside in the EPR-silent 2+ state. Incubation with H₂ leads to reduction of two of the [4Fe–4S] clusters, whereas only strongly reducing agents lead to reduction of the third cluster, which is ascribed to be the [4Fe–4S] center in ‘proximal’ position to the [NiFe] center. In the two different active site redox states, the low-spin Fe^II exhibits distinct Mössbauer features attributed to changes in the electronic and geometric structure of the catalytic center. The results are discussed with regard to the spectral characteristics and physiological function of H₂-sensing regulatory hydrogenases.     

Oxygen Evolution and Reduction Reaction Activity Investigations on Fe,Co or Ni embedded Tetragonal Graphene by A Thermodynamical Full-Landscape Searching Scheme

Single transition metal (TM) atoms such as Fe, Co and Ni occupying a carbon divacancy in tetragonal graphene (TG) and bonded with four nitrogen atoms (TM@N₄TG) as electrocatalysts are investigated by means of first-principles calculations. To consider the effect of solvent species on the local configuration of the active single metal, a thermodynamical full-landscape searching (TFLS) scheme is employed. The calculated thermodynamic overpotentials (η_td) from our TFLS indicate that Co@N₄TG displays high catalytic activity toward both oxygen evolution reaction (OER) and reduction reaction (ORR), with η_td^OER and η_td^ORR as 0.397 and 0.357 V, respectively. Its OER potential cannot be captured if only one four electron reaction loop (FERL) is considered. The actual active pathways do not always turn out to be the reactions starting from the bare site. Our findings demonstrate that TG is a promising support and TM confined TD can be used to design effective and cheap multifunctional electrocatalysts.     

The Effect of Anions and pH on the Activity and Selectivity of an Annealed Polycrystalline Au Film Electrode in the Oxygen Reduction Reaction-Revisited

Aiming at a better understanding of correlations between the activity and selectivity of Au electrodes in the oxygen reduction reaction (ORR) under controlled transport conditions, we have investigated this reaction by combined electrochemical and in situ FTIR measurements, performed in a flow cell set-up in an attenuated total reflection (ATR) configuration in acid and alkaline electrolytes. The formation of incomplete reduction products (hydrogen peroxyde/peroxyls) was detected by a collector electrode, the onset of OH_ad formation was probed by bulk CO oxidation. Using an electroless-deposited, annealed Au film on a Si prism as working electrode and three different electrolytes for comparison (sulfuric acid, perchloric acid, sodium hydroxide solution), we could derive detailed information on the anion adsorption behavior, and could correlate this with the ORR characteristics. The data reveal pronounced effects of the anions and the pH on the ORR characteristics, indicated e. g., by a grossly different activity and selectivity for the 4-electron pathway to water/hydroxyls, with the onset ranging from ca. 1.0 V in alkaline electrolyte to 0.6 V in sulfuric acid electrolyte, and the selectivity for the 4-electron pathway ranging from 100 % (alkaline electrolyte, low overpotentials) to 40 % (acidic electrolytes, alkaline electrolyte at high overpotentials). In contrast, the effect of the ORR on the anion adsorption characteristics is small. Anion effects as well as correlations between anion adsorption and ORR are discussed.     

Proton‐Coupled Reduction of the Catalytic [4Fe‐4S] Cluster in [FeFe]‐Hydrogenases

In nature, [FeFe]‐hydrogenases catalyze the uptake and release of molecular hydrogen (H₂) at a unique iron‐sulfur cofactor. The absence of an electrochemical overpotential in the H₂ release reaction makes [FeFe]‐hydrogenases a prime example of efficient biocatalysis. However, the molecular details of hydrogen turnover are not yet fully understood. Herein, we characterize the initial one‐electron reduction of [FeFe]‐hydrogenases by infrared spectroscopy and electrochemistry and present evidence for proton‐coupled electron transport during the formation of the reduced state Hred′. Charge compensation stabilizes the excess electron at the [4Fe‐4S] cluster and maintains a conservative configuration of the diiron site. The role of Hred′ in hydrogen turnover and possible implications on the catalytic mechanism are discussed. We propose that regulation of the electronic properties in the periphery of metal cofactors is key to orchestrating multielectron processes.     

Investigation of Pt catalytic effects on carbon support corrosion of the cathode catalyst in PEM fuel cells using DEMS spectra

Differential electrochemical mass spectrometry (DEMS) spectra of cathode exhaust gases, CO₂, H₂ and O₂, are presented for the first time to characterize the Pt redox reactions and Pt-catalyzed oxygen reduction reaction (ORR), as well as correlate them to carbon support corrosion (CSC) of the cathode catalyst in a real proton exchange membrane fuel cell (PEMFC). Furthermore, different oxidation states of Pt with catalytic capacity for CSC are indicated.     

Carbon Nanodots as Electrocatalysts towards the Oxygen Reduction Reaction

Electrocatalysts perform a key role in increasing efficiency of the oxygen reduction reaction (ORR) and as a result, efforts have been made by the scientific community to develop novel and cheap materials that have the capability to exhibit low ORR overpotentials and allow the reaction to occur via a 4 electron pathway, thereby mimicking as close as possible to traditionally utilised platinum. In that context, two different types of carbon nanodots (CNDs) with amide (CND‐CONH₂) and carboxylic (CND‐COOH) surface groups, have herein been fabricated and shown to exhibit excellent electrocatalytic activity towards the ORR in acid and basic media (0.1 M H₂SO₄ and 0.1 M KOH). CND surface modified carbon screen‐printed electrodes allow for a facile electrode modification and enabling the study of the CNDs electrocatalytic activity towards the ORR. CND‐COOH modified SPEs are found to exhibit improved ORR peak current and reduced overpotential by 21.9 % and 26.3 %, respectively compared to bare/unmodified SPEs. Additionally, 424 μg cm⁻² CND‐COOH modified SPEs in oxygenated 0.1 M KOH are found to facilitate the ORR via a near optimal 4 (3.8) electron ORR pathway. The CNDs also exhibited excellent long‐term stability and tolerance with no degradation being observed in the achievable current with the ORR current returning to the baseline level within 100 seconds of exposure to a 1.5 M solution of methanol. In summary, the CND‐COOH could be utilised as a cathodic electrode for PEMFCs offering greater stability than a commercial Pt electrode.     

仿生合成中的单核铜蛋白及其含铜金属模拟酶的研究

仿生化学的研究重点之一是对各类天然金属酶的氧化模拟。文章主要综述了近年来国内外对含金属铜的单核蛋白质体蓝素结构、半乳糖氧化酶、含铜的胺氧化酶和铜锌超氧歧化酶等的结构特点和催化功能的研究进展。质体蓝素结构为畸变的四面体,参与光合作用过程中电子传递;半乳糖氧化酶活性中心结构是平面四边形,能将伯醇氧化成相应的醛;铜锌超氧歧化...     

Exploring of catalytic oxygen reduction reaction activity of lattice carbons of vanadium and niobium doped nitrogen codoped carbon nanotubes by density functional theory

The oxygen electroreduction mechanism on the V- and Nb-doped nitrogen-codoped (6,6)armchair carbon nanotube with incorporated MN₄ fragment has been studied using the ωB97XD and PBE density functional theory approaches. The metal center in MN₄ fragment and the adjacent NCCN double bond (C₂ site) of the support have been revealed as active centers. The metal active centers turned out to be irreversibly oxidized at the first step of ORR affording stable O*, 2O*, or O*HO* adsorbates depending on the applied electrode potential U, that makes them no longer active in ORR. Therefore, the C₂ site comes at the forefront in ORR catalysis. Among the metal oxidized forms M(O)N₄ , M(O)(O)N₄ , and M(O)(OH)N₄ CNT, the C₂ site of the latter turned out to be most active for 4e dissociative ORR. For both metals the last protonation/electron transfer step, HO* + H* → H₂O, is the rate-limiting step. The alternative hydrogen peroxide formation is not only thermodynamically less favorable but also kinetically slower than the 4e dissociative ORR route on the C₂ site of model M(O)(OH)N₄ CNT catalyst.     

Photobiocatalysis: Activating Redox Enzymes by Direct or Indirect Transfer of Photoinduced Electrons

Biocatalytic transformation has received increasing attention in the green synthesis of chemicals because of the diversity of enzymes, their high catalytic activities and specificities, and mild reaction conditions. The idea of solar energy utilization in chemical synthesis through the combination of photocatalysis and biocatalysis provides an opportunity to make the “green” process greener. Oxidoreductases catalyze redox transformation of substrates by exchanging electrons at the enzyme′s active site, often with the aid of electron mediator(s) as a counterpart. Recent progress indicates that photoinduced electron transfer using organic (or inorganic) photosensitizers can activate a wide spectrum of redox enzymes to catalyze fuel‐forming reactions (e.g., H₂ evolution, CO₂ reduction) and synthetically useful reductions (e.g., asymmetric reduction, oxygenation, hydroxylation, epoxidation, Baeyer–Villiger oxidation). This Review provides an overview of recent advances in light‐driven activation of redox enzymes through direct or indirect transfer of photoinduced electrons.     

Oxidation state changes and electron flow in enzymatic catalysis and electrocatalysis through Wannier-function analysis

In catalysis by metalloenzymes and in electrocatalysis by clusters related in structure and composition to the active components of such enzymes transition-metal atoms can play a central role in the catalyzed redox reactions. Changes to their oxidation states (OSs) are critical for understanding the reactions. The OS is a local property and we introduce a new, generally useful local method for determining OSs, their changes, and the associated bonding changes and electron flow. The method is based on computing optimally localized orbitals (OLOs). With this method, we analyze two cases, superoxide reductase (SOR) and a proposed hydrogen-producing model electrocatalyst [FeS(2)]/[FeFe](P), a modification of the active site of the diiron hydrogenase enzymes. Both utilize an under-coordinated Fe site where a one-electron reduction (for SOR) or a two-electron reduction (for [FeFe](P)) of the substrate occurs. We obtain the oxidation states of the Fe atoms and of their critical ligands, the changes of the bonds to those ligands, and the electron flow during the catalytic cycle, thereby demonstrating that OLOs constitute a powerful interpretive tool for unraveling reaction mechanisms by first-principles computations.     

Insight into Iron Leaching from an Ascorbate-Oxidase-like Fe−N−C Nanozyme and Oxygen Reduction Selectivity**

Ascorbate (H₂A) is a well-known antioxidant to protect cellular components from free radical damage and has also emerged as a pro-oxidant in cancer therapies. However, such “contradictory” mechanisms underlying H₂A oxidation are not well understood. Herein, we report Fe leaching during catalytic H₂A oxidation using an Fe−N−C nanozyme as a ferritin mimic and its influence on the selectivity of the oxygen reduction reaction (ORR). Owing to the heterogeneity, the Fe-N_x sites in Fe−N−C primarily catalyzed H₂A oxidation and 4 e⁻ ORR via an iron-oxo intermediate. Nonetheless, trace O₂⋅⁻ produced by marginal N−C sites through 2 e⁻ ORR accumulated and attacked Fe-N_x sites, leading to the linear leakage of unstable Fe ions up to 420 ppb when the H₂A concentration increased to 2 mM. As a result, a substantial fraction (ca. 40 %) of the N−C sites on Fe−N−C were activated, and a new 2+2 e⁻ ORR path was finally enabled, along with Fenton-type H₂A oxidation. Consequently, after Fe ions diffused into the bulk solution, the ORR at the N−C sites stopped at H₂O₂ production, which was the origin of the pro-oxidant effect of H₂A.     

S-Block Potassium Single-atom Electrocatalyst with K−N4 Configuration Derived from K+/Polydopamine for Efficient Oxygen Reduction

Currently, single-atom catalysts (SACs) research mainly focuses on transition metal atoms as active centers. Due to their delocalized s/p-bands, the s-block main group metal elements are typically regarded as catalytically inert. Herein, an s-block potassium SAC (K−N−C) with K-N₄ configuration is reported for the first time, which exhibits excellent oxygen reduction reaction (ORR) activity and stability under alkaline conditions. Specifically, the half-wave potential (E_1/2) is up to 0.908 V, and negligible changes in E_1/2 are observed after 10,000 cycles. In addition, the K−N−C offers an exceptional power density of 158.1 mW cm⁻² and remarkable durability up to 420 h in a Zn-air battery. Density functional theory (DFT) simulations show that K−N−C has bifunctional active K and C sites, can optimize the free energy of ORR reaction intermediates, and adjust the rate-determining steps. The crystal orbital Hamilton population (COHP) results showed that the s orbitals of K played a major role in the adsorption of intermediates, which was different from the d orbitals in transition metals. This work significantly guides the rational design and catalytic mechanism research of s-block SACs with high ORR activity.