Synthesis and physicochemical characterization of amphiphilic triblock copolymer brush containing pH-sensitive linkage for oral drug delivery

A novel and well-defined pH-sensitive amphiphilic triblock copolymer brush poly(lactide)-b-poly(methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) (PLA-b-PMAA-b-PPEGMA) and its self-assembled micelles were developed for oral administration of hydrophobic drugs. The copolymer and its precursors were synthesized by the combination of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and ring-opening polymerization (ROP) techniques. The molecular structures and characteristics were confirmed by GPC, (1)H NMR, and FT-IR. The critical micelle concentration (CMC) values of PLA-b-PMAA-b-PPEGMA in aqueous medium varied from 1.4 to 2.6 mg/L, and the partition equilibrium constant (K(v)) of pyrene in micellar solutions ranged from 2.873 × 10(5) to 3.312 × 10(5). The average sizes of the self-assembled blank and drug-loaded micelles were 140-250 nm determined by DLS in aqueous solution. The morphology of the micelles was found to be spherical by SEM. Nifedipine (NFD), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. The in vitro release behavior of NFD from the micelles was pH-dependent. In simulated gastric fluid (SGF, pH 1.2), the cumulative release percent of NFD was relative low, while in simulated intestinal fluid (SIF, pH 7.4), more than 96% was released within 24 h. All the results showed that the pH-sensitive PLA-b-PMAA-b-PPEGMA micelle may be a prospective candidate as oral drug delivery carrier for hydrophobic drugs with controlled release behavior.     

Structural characterization of micelles formed of cholesteryl-functionalized cyclodextrins

Amphiphilic cholesteryl 2,6-di-O-methyl-β-cyclodextrins (chol-DIMEB) can self-aggregate into spherical micelles of noteworthy potential for drug delivery. All-atom molecular dynamics simulations of chol-DIMEB micelles consisting of 3-24 monomers have been performed in aqueous solution. chol-DIMEB exhibits a pronounced tendency to self-assemble into core-shell structures. van der Waals interactions within the cholesteryl nucleus constitute the main driving force responsible for the formation of the micelle. The calculated radii of the hydrophobic core and of the hydrophilic shell for the micellar structure formed by 24 monomers agree well with the experiment. The cyclodextrin moieties are found to be exposed toward the aqueous medium and possess the appropriate flexibility to capture drugs in an effective fashion. Analysis of the solvent accessible surface area and hydration number indicates that the micelles are highly hydrosoluble species and can, therefore, enhance significantly the aqueous solubility of lipophilic drugs. In addition, the spatial structure of the micelles is suggestive of multiple potential drug binding sites. The present contribution unveils how micelles endowed with specific characteristics can form, while opening exciting perspectives for the design of novel micellar nanoparticles envisioned to be drug carriers of high potential.     

Novel amphiphilic macromolecules and their in vitro characterization as stabilized micellar drug delivery systems

A series of amphiphilic macromolecules, amphiphilic scorpion-like macromolecules (AScMs) and amphiphilic star-like macromolecules (ASMs), were evaluated as potential drug delivery systems for intravenous administration. AScMs aggregate to form polymeric micelles; whereas the ASMs have a covalently bound core structure and behave as unimolecular micelles. Four structurally different AScMs and two ASMs were selected for further evaluation focusing on micellar stability and biocompatibility. AScMs were determined to have extremely low cmc values, indicating excellent thermodynamic stability compared to other polymeric micelle systems. Particle sizes of the AScM polymeric micelles and ASM unimolecular micelles were between 10 and 20 nm, and remained constant for up to 3 weeks storages as aqueous solutions at room temperature (approximately 23 degrees C) and 37 degrees C. The dissociation kinetics of the AScM polymeric micelles were slowed relative to small molecule surfactant micelles, again indicating enhanced kinetic stability. With respect to hemolytic activity, AScMs with longer acyl chains were hemolytic; whereas the ASMs had minimal hemolytic activity due to the covalently bound structure. Both ASM unimolecular micelles and AScM polymeric micelles have excellent micellar stability, but the ASMs are more suitable as injectable drug delivery systems due to their low hemolytic activity.     

Interaction of pyrimethamine and sulfadiazine with ionic and neutral micelles: Electronic absorption and fluorescence studies

The binding of two antitoxoplasmosis drugs, pyrimethamine (PYR) and sulfadiazine (SDZ) to cationic cetyltrimethylammonium chloride (CTAC), anionic sodium dodecylsulfate (SDS), zwiterionic N-hexadecyl-N,N-dimethyl-2-ammonium-1-propanesulfonate (HPS) and neutral polyoxyethylene-dodecyl-ether (Brij-35^®) micelles was studied using absorption and fluorescence spectroscopic methods. The pK_a of PYR changed in the presence of charged anionic, cationic and zwiterionic micelles, indicating that interaction is influenced by the micellar charge. For SDZ, pK_a changes were lower than 1 for all micelles, suggesting the occurrence of low binding constants in addition to a reasonable influence of the micellar charge. The values of binding constants K_b, obtained from fluorescence measurements, for PYR to CTAC micelles were very low at pH 4.0, where the drug is in a complete protonated state, increasing at pH 9.0 to long-chained CTAC and HPS micelles since this factor also favors accomodation of the neutral drug in the hydrophobic compartments. For SDZ the binding constants were determined from optical absorption measurements. Low binding constants were observed to charged surfactant micelles, with influence of micellar charge. It must be stated however that those values can be underestimated due to the relatively low sensitivity of the method based on absorption measurements.     

Fusiform micelles from nonlinear poly(ethylene glycol)/polylactide copolymers as biodegradable drug carriers

PEG-PLA copolymers with dumbbell- and Y-shaped structures are prepared. They can self-assemble from nanoparticles to micro-sized fusiform micellar particles in aqueous solution. In particular the micelles formed by the (PLA)2-PEG-(PLA)2 particles show a better drug loading capacity and encapsulation efficiency than those formed by linear MPEG-PLA. In vitro studies show that the particles formed by Y-shaped copolymers show a particularly quick drug release. The copolymers have good biocompatibility with low cytotoxicity. These unique self-assembled systems thus have many possible biomedical applications, such as a sustained delivery of high-dosed water insoluble drugs, quick effective drugs for trauma, controlled delivery of the oral-administration drugs, and so forth.     

Pharmaceutical applications of micelles in chromatography and electrophoresis

This review surveys the use of micelles as separation media in chromatography and electrophoresis. Applications to pharmaceuticals whose molecular masses are relatively small are focused on in this review. In high-performance liquid chromatography (HPLC), chromatography using micelles and reversed-phase stationary phases such as octadecylsilylized silica gel (ODS) columns is known as micellar liquid chromatography (MLC). The main application of MLC to pharmaceutical analysis is the same as in ion-pair chromatography using alkylsulfonate or tetraalkylammonium. In most cases, selectivity is much improved compared with other short alkyl chain ion-pairing agents such as pentanesulfonate or octanesulfonate. Direct plasma/serum injection can be successful in MLC. Separation of small ions is also successful by using gel filtration columns and micellar solutions. In electrophoresis, especially capillary electrophoresis (CE), micelles are used as pseudo-stationary phases in capillary zone electrophoresis (CZE). This mode is called micellar electrokinetic chromatography (MEKC). Most of the drug analysis can be performed by using the MEKC mode because of its wide applicability. Enantiomer separation, separation of amino acids and closely related peptides, separation of very complex mixtures, determination of drugs in biological samples etc. as well as separation of electrically neutral drugs can be successfully achieved by MEKC. Microemulsion electrokinetic chromatography (MEEKC), in which surfactants are also used in forming the microemulsion, is successful for the separation of electrically neutral drugs as in MEKC. This review mainly describes the typical applications of MLC and MEKC for the analysis of pharmaceuticals.     

Recent advances in stimuli-responsive degradable block copolymer micelles: synthesis and controlled drug delivery applications

(Bio)degradation in response to external stimuli (stimuli-responsive degradation, SRD) is a desired property in constructing novel nanostructured materials. For polymer-based multifunctional drug delivery applications, the degradation enables fast and controlled release of encapsulated therapeutic drugs from delivery vehicles in targeted cells. It also ensures the clearance of the empty device after drugs are delivered to the body. This review summarizes recent development of various strategies to the design and synthesis of self-assembled micellar aggregates based on novel amphiphilic block copolymers having different numbers of stimuli-responsive cleavable elements at various locations. These cleavable linkages including disulfide, acid-labile, and photo-cleavable linkages are incorporated into micelles, and then are cleaved in response to cellular triggers such as reductive reaction, light, and low acid. The well-designed SRD micelles have been explored as controlled/enhanced delivery vehicles of drugs and genes. For future design and development of effective stimuli-responsive degradable micelles toward tumor-targeting delivery applications in vivo, a high degree of control over degradation for tunable release of encapsulated anticancer drugs as well as bioconjugation for active tumor-targeting is required.     

药物包载对两亲嵌段共聚物胶束形态的影响

以聚(ε-己内酯-b-L-丙交酯)/聚乙二醇单甲醚(P(CL-b-LLA)-b-mPEG)和聚(ε-己内酯-b-D,L-丙交酯)/聚乙二醇单甲醚(P(CL-b-DLLA)-b-mPEG)两种两亲嵌段共聚物为载体,选择了物理状态完全不同、而疏水性相近的吲哚美辛和维生素E为模型药物,研究了药物包载对高分子胶束形态的影响.发现两种药物在高分子胶束内部的增溶均会导致胶束形态发生显著改变,变化行为与胶束内核的结晶性和药物疏水性有关.另外,还研究了两种嵌段共聚物的载药性能,发现非结晶性疏水内核共聚物的药物包载率明显大于可结晶疏水内核的共聚物.     

表面活性剂溶胀胶束：性能及应用

溶胀胶束是表面活性剂胶束增溶其它物质后使胶束膨胀的一种胶束状态,因其能显著提高难溶性物质的溶解度而备受关注。针对近年来对溶胀胶束的研究进展,综述了溶胀胶束的最大增溶量、增溶过程以及增溶后形貌尺寸的变化等问题,总结了影响胶束增溶作用的因素,厘清了溶胀胶束与微乳液的异同,介绍了溶胀胶束的应用,展望了其应用前景与发展方向。     

Polypeptidic Micelles Stabilized with Sodium Alginate Enhance the Activity of Encapsulated Bedaquiline

The coating of polypeptidic micelles with sodium alginate is described as a strategy to improve the stability of micelles for drug delivery. Bedaquiline, approved in 2012 for the treatment of multidrug resistant tuberculosis, has been used as an example of hydrophobic drug to study the loading efficiency, the release of the encapsulated drug in different media, and the in vitro antimicrobial activity of the system. Alginate coating prevents the burst release of the drug from micelles upon dilution and leads to a sustained release in all tested media. In view of possible oral administration, the alginate coated micelles show better stability in gastric and intestinal simulated media. Notably, the encapsulated bedaquiline shows increased in vitro activity against Mycobacterium tuberculosis compared to free bedaquiline.     

Drug-loaded and superparamagnetic iron oxide nanoparticle surface-embedded amphiphilic block copolymer micelles for integrated chemotherapeutic drug delivery and MR imaging

We report on the fabrication of organic/inorganic hybrid micelles of amphiphilic block copolymers physically encapsulated with hydrophobic drugs within micellar cores and stably embedded with superparamagnetic iron oxide (SPIO) nanoparticles within hydrophilic coronas, which possess integrated functions of chemotherapeutic drug delivery and magnetic resonance (MR) imaging contrast enhancement. Poly(ε-caprolactone)-b-poly(glycerol monomethacrylate), PCL-b-PGMA, and PCL-b-P(OEGMA-co-FA) amphiphilic block copolymers were synthesized at first by combining ring-opening polymerization (ROP), atom transfer radical polymerization (ATRP), and post- modification techniques, where OEGMA and FA are oligo(ethylene glycol) monomethyl ether methacrylate and folic acid-bearing moieties, respectively. A model hydrophobic anticancer drug, paclitaxel (PTX), and 4 nm SPIO nanoparticles were then loaded into micellar cores and hydrophilic coronas, respectively, of mixed micelles fabricated from PCL-b-PGMA and PCL-b-P(OEGMA-co-FA) diblock copolymers by taking advantage of the hydrophobicity of micellar cores and strong affinity between 1,2-diol moieties in PGMA and Fe atoms at the surface of SPIO nanoparticles. The controlled and sustained release of PTX from hybrid micelles was achieved, exhibiting a cumulative release of ~61% encapsulated drugs (loading content, 8.5 w/w%) over ~130 h. Compared to that of surfactant-stabilized single SPIO nanoparticles (r(2) = 28.3 s(-1) mM(-1) Fe), the clustering of SPIO nanoparticles within micellar coronas led to considerably enhanced T(2) relaxivity (r(2) = 121.1 s(-1) mM(-1) Fe), suggesting that hybrid micelles can serve as a T(2)-weighted MR imaging contrast enhancer with improved performance. Moreover, preliminary experiments of in vivo MR imaging were also conducted. These results indicate that amphiphilic block copolymer micelles surface embedded with SPIO nanoparticles at the hydrophilic corona can act as a new generation of nanoplatform integrating targeted drug delivery, controlled release, and disease diagnostic functions.     

SDS对SB3-12胶束表面电荷密度的调控作用及对药物增溶的影响

两性离子甜菜碱表面活性剂(SB3-12)胶束具有较好的生物相容性,由于相反电荷的极性头之间具有静电中和作用,胶束表面具有小的负电荷密度。当加入阴离子的十二烷基硫酸钠(SDS)以后,负离子SD-与SB3-12胶束极性区内层季铵正电荷的静电中和作用,能连续地调节胶束表面磺酸基的负电荷密度,这有利于对药物分子的选择性增溶和调节在生理条件下的药物的输送。等温滴定量热(ITC)研究发现SB3-12和SDS有强的协同效应,混合临界胶束浓度(CMC)和胶束化焓明显降低,并得到两者协同效应的弱静电作用机理。当模型药物分子芦丁(Rutin)与SB3-12/SDS混合胶束作用时,芦丁7位羟基的氢解离后的阴离子与SDS共同作用于SB3-12形成混合胶束。UV-Vis吸收光谱和~1H NMR谱研究发现,在SB3-12胶束中,芦丁分子的A环位于季铵阳离子附近,B环位于两个相反电荷之间的弱极性区域。在SDS胶束中,B环位于栅栏层,而A环和二糖暴露于水相侧。在混合胶束中,随着SDS摩尔分数增加,对A环的静电吸引变弱。离子表面活性剂对两性离子表面活性剂胶束表面电荷密度的调节作用,本质上是对胶束极性区域的物理及化学性质的微调,进而实现对药物的可控增溶。     

Sol–gel one-pot synthesis in soft conditions of mesoporous silica materials ready for drug delivery system

The present work reveals a new and simple strategy, a one-step sol–gel procedure, to encapsulate a low water-soluble drug in silica mesostructured microparticles and to improve its release in physiological media. The synthesis of these new materials is based on the efficient solubilisation of a poorly water-soluble drug in surfactant micelles (Tween 80, a pharmaceutical excipient) which act as template for the silica network. A strict control of the sol–gel process and the parameters procedure in soft conditions (concentration, pH, temperature) was applied to reach the solubilisation limit of the drug in the micellar solution so as to optimise its encapsulation. Even if this one-pot procedure could appear limited by the low drug loading, it could provide an interesting alternative for the formulation of many recent highly active but very poorly soluble drugs.     

Conductometric and spectrofluorimetric characterization of the mixed micelles constituted by dodecyltrimethylammonium bromide and a tricyclic antidepressant drug in aqueous solution

Conductivity and static fluorescence measurements have been carried out at 25 degrees C to study the monomeric and micellar phases of aqueous solutions of mixed micelles constituted by a conventional cationic surfactant, dodecyltrimethylammonium bromide (D(12)TAB), and a tricyclic antidepressant drug, amitriptyline hydrochloride (AMYTP), with aggregation properties. From conductivity data, the total mixed critical micelle concentration and the dissociation degree of the mixed micelle have been obtained, while fluorescence experiments allow for the determination of the total aggregation number, and the micropolarity of micellar inside. Furthermore, the partial contribution of each surfactant to the mixed micellization process, through their critical micelle concentrations and their aggregation numbers have been determined, as well. The solubilization of the drug in the mixed micelles has been also studied through the mass action model, by determining the association constant between the micelles and the drug. From these results, the use of the micelles studied in this work as potential models for vectors of antidepressant drugs of the amitriptyline family has been discussed. The theoretical aspects of the mixed micellization process have been also analyzed.     

Polymeric micelle systems of hydroxycamptothecin based on amphiphilic N-alkyl-N-trimethyl chitosan derivatives

This research investigated the possible utilization of amphiphilic N-octyl-N-trimethyl chitosan (OTMCS) derivatives in solublization and controlled release of 10-hydroxycamptothecin (10-HCPT), a hydrophobic anticancer drug. The release behavior of the 10-HCPT-OTMCS micelles was measured and compared to that of a commercial 10-HCPT lyophilized powder in vitro and in vivo. This research also examined the effects of chemical structure of the chitosan derivatives and the micellar preparation conditions on the encapsulation efficiency, drug loading content, and particle size of the polymeric micelles. The results showed that these chitosan derivatives were able to self-assemble and form spherical shape polymeric micelles with an average particle size range of 24–280 nm and a drug loading content of 4.1–32.5%, depending on the modified structures and loading procedures. The solubility of 10-HCPT in aqueous fluid was increased about 80,000-fold from 2 ng/ml in water to 1.9 mg/ml in OTMCS micellar (degree of octyl and trimethyl substitution is 8% and 54%, respectively) solution. In addition, OTMCS was able to modulate the in vitro release of 10-HCPT and improve its pharmacokinetic properties and lactone ring stability in vivo. These data suggested the possible utilization of the amphiphilic micellar chitosan derivatives as carriers for hydrophobic drugs for improving their delivery and release properties.     

Characterization of cephalosporin transfer between aqueous and colloidal phases by micellar electrokinetic chromatography

A new electrokinetic chromatographic method was applied to the determination of the partition coefficient between water and micelle for a group of cephalosporins (cefmetazol, cephradin, cefaclor, ceftazidim, cefodizim, cephapirin, cephalothin and ceftriaxon) using sodium dodecyl sulphate as an anionic surfactant in microemulsion and in micellar systems. In the new method, the running buffer contains both the micelles and the drug, and the injected solution contains the same concentration of micelles as the running buffer but not the drug. The mobility of the drug can be measured from a negative peak recorded the chromatogram. The required parameters for the determination of the capacity factor (mu(aq) and /mu(me) are the electrophoretic mobilities of the solutes in the aqueous and the micelle phases, mu(eff) is the effective mobility in the micellar system or in the microemulsion) were measured by the new micellar and microemulsion electrokinetic chromatography technique. Linear log-log relationships were found between both the micelle-water partition coefficient and the capacity factor and the n-octanol-water partition coefficient.     

Trifluoperazine effects on anionic and zwitterionic micelles: a study by small angle X-ray scattering

In this work small angle X-ray scattering (SAXS) studies on the interaction of the phenothiazine trifluoperazine (TFP, 2-10 mM), a cationic drug, with micelles of the zwitterionic surfactant 3-(N-hexadecyl-N,N-dimethylammonium) propane sulfonate (HPS, 30 mM) and the anionic surfactant sodium dodecyl sulfate (SDS, 40 mM) at pH 4.0, 7.0, and 9.0 are reported. The data were analyzed through the modeling of the micellar form factor and interference function, as well as by means of the distance distribution function p(r). For anionic micelles (SDS), the results evidence a micellar shape transformation from prolate ellipsoid to cylinder accompanied by micellar growth and surface charge screening as the molar ratio TFP:SDS increases in the complex for all values of pH. Small ellipsoids with axial ratio nu=1.5+/-0.1 (long dimension of 60 A) grow and reassemble into cylinder-like aggregates upon 5 mM drug incorporation (1 TFP:8 SDS monomers) with a decrease of the micelle surface charge. At 10 mM TFP:40 mM SDS cylindrical micelles are totally screened with an axial ratio nu approximately 4 (long dimension approximately 140 A at pH 7.0 and 9.0). However, at pH 4.0, where the drug is partially diprotonated, 10 mM TFP incorporation gives rise to a huge increase in micellar size, resulting in micelles at least 400 A long, without altering the intramicellar core. For zwitterionic micelles (HPS), the results have shown that the aggregates also resemble small prolate ellipsoids with averaged axial ratio approximately nu=1.6+/-0.1. Under TFP addition, both the paraffinic radius and the micellar size show a slight decrease, giving evidence that the micellar hydrophobic core may be affected by phenothiazine incorporation rather than that observed for the SDS/TFP comicelle. Therefore, our results demonstrate that the axial ratio and shape evolution of the surfactant:TFP complex are both dependent on surfactant surface-charge and drug:surfactant molar ratio. The results are compared with those recently obtained for another phenothiazine drug, chlorpromazine (CPZ), in SDS and HPS micelles (Caetano, Gelamo, Tabak, and Itri, J. Colloid Interface Science 248 (2002) 149).     

SDS-Based Biomembrane Mimetic Chromatography for Prediction of Human Drug Transport as an in Vitro Technique

The main oral drug absorption barriers are fluid cell membranes, and generally drugs are absorbed by a passive diffusion mechanism. On the other hand, the blood–brain barrier (BBB) is considered to be the main barrier to drug transport into the central nervous system (CNS). The BBB restricts the passive diffusion of many drugs from blood to brain. Biopartitioning micellar chromatography (BMC), a mode of micellar liquid chromatography that uses micellar mobile phases in adequate experimental conditions, can be useful as an in vitro system in mimicking the drug partitioning process into biological systems. In this study, relationships between the BMC retention data of a heterogeneous set of 12 drugs and their pharmacokinetics parameters (human oral drug absorption and BBB penetration ability) are studied and the predictive ability of the models is evaluated. Modeling of log k _BMC of these compounds was established by multiple linear regression in two different concentrations (0.07 and 0.09 M) of sodium dodecyl sulfate (SDS). The results showed a fair correlation between human oral drug absorption and BMC retention data in 0.09 M SDS (R ² = 0.864) and a good correlation between the blood–brain distribution coefficient and BMC retention data in 0.07 M of SDS (R ² = 0.887). Application of the developed models to a prediction set demonstrated that the model is also reliable with good predictive accuracy. The external and internal validation results showed that the predicted values are in good agreement with the experimental value.     

Transport properties and aggregation phenomena of polyoxyethylene sorbitane monooleate (polysorbate 80) in pig gastrointestinal mucin and mucus

The aqueous environment in the gastrointestinal tract frequently requires solubilization of hydrophobic drug molecules in appropriate drug delivery vehicles. An effective uptake/absorption and systemic exposure of a drug molecule entails many processes, one being transport properties of the vehicles through the mucus layer. The mucus layer is a complex mixture of biological molecules. Among them, mucin is responsible of the gel properties of this layer. In this study, we have investigated the diffusion of polyoxyethylene sorbitane monooleate (polysorbate 80), a commonly used nonionic surfactant, in aqueous solution, in mucin solutions at 0.25 and 5 wt %, and in mucus. These measurements were done by using the pulsed field gradient spin echo nuclear magnetic resonance (PGSE-NMR) technique. We conclude that polysorbate 80 is a mixture of non-surface-active molecules that can diffuse freely through all the systems investigated and of surface-active molecules that form micellar structures with transport properties strongly dependent on the environment. Polysorbate 80 micelles do not interact with mucin even though their diffusion is hindered by obstruction of the large mucin molecules. On the other hand, the transport is slowed down in mucus due to interactions with other components such as lipids depots. In the last part of this study, a hydrophobic NMR probe molecule has been included in the systems to mimic a hydrophobic drug molecule. The measurements done in aqueous solution revealed that the probe molecules were transported in a closely similar way as the polysorbate 80 micelles, indicating that they were dissolved in the micellar core. The situation was more complex in mucus. The probe molecules seem to dissolve in the lipid depots at low concentrations of polysorbate 80, which slows down their transport. At increasing concentration of polysorbate 80, the diffusion of the probe molecules increases indicating a continuous dissolution of hexamethyldisilane in the core of polysorbate 80 micelles.