Comparison of three methods for natural gas dehydration

This paper compares three methods for natural gas dehydration that are widely applied in industry:(1) absorption by triethylene glycol, (2) adsorption on solid desiccants and (3) condensation. A comparison is made according to their energy demand and suitability for use. The energy calculations are performed on a model where 105 Nm3/h water saturated natural gas is processed at 30 °C. The pressure of the gas varies from 7 to 20 MPa. The required outlet concentration of water in natural gas is equivalent to the dew point temperature of -10 °C at gas pressure of 4 MPa.     

用天然气气相色谱分析仪快速分析天然气组分及性能参数

介绍用天然气气相色谱分析仪分析天然气中无机组分、有机组分和热值的方法,确定了分析方法和条件,该方法测量结果的相对标准偏差小于1%。采用该方法对制备的标准气体进行了考察,并将该方法用于天然气气体标准物质的性能评价和国际实验室间的比对,天然气组分含量比对相对误差在±1%之内,热量值比对相对误差在±3%之内,取得了国际等效性。     

气敏新材料MXenes在呼出气体传感器中的应用

电子鼻结合人工智能对呼出气进行检测、分析和识别已成为非侵入性医疗检测领域的研究热点。然而,目前已报道的气体传感材料尚不能同时满足高灵敏度、高选择性和稳定的室温检测,阻碍了气体传感器在医疗健康领域的应用及发展,寻找合适的传感材料具有重要的意义和挑战。新型二维层状纳米材料MXenes具有种类多、比表面积大、导电性能强、表面含有丰富的官能团以及能带宽度可调等优异性能,是高灵敏、低能耗气体传感器的明星候选材料。本综述针对MXenes基材料的特殊结构,总结梳理了MXenes基材料在气体传感中的最新研究成果,聚焦于MXenes材料的气体传感机理和改性方法,对MXenes材料用于气体传感依然存在的问题和挑战进行深入探讨。     

用低温气相色谱分析火焰气体

本文采用低温气相色谱法分析了火焰气体的成份和深度，色谱柱固定相为ＰｏｒａｐａｒｋＱ，柱温范围－９９－２５０℃氦气作载气。在所选择的实验条件下，火焰气体中的Ｎ２和Ｏ２有效地得到分离，可迅速精确地分析确定Ｎ２的浓度以及其他成份和浓度。     

Prediction of water content of sour and acid gases

Estimating the feasibility of acid gas geological disposal requires the knowledge of the water content of the gas phase at moderate pressures and temperatures (typically below 50 MPa, below 380 K) and up to 6 mol NaCl. In this paper, a non-iterative model is developed to predict the water content of sour and acid gases at equilibrium with pure water and brine. This model is based on equating the chemical potential of water and using the modified Redlich–Kwong equation of state to calculate the fugacity of the gas phase. The water content of pure CH₄, CO₂ and H₂S are represented with average absolute deviations of less than 3.36, 7.04 and 8.4%, respectively. Experimental data of the water content of mixtures of the acid gases were reproduced with average absolute deviations of less than 6.32%.     

Polypyrrolones for membrane gas separations. I. Structural comparison of gas transport and sorption properties

Despite efforts by the membrane community to develop polymeric materials with improved O₂/N₂ separation performance, limited progress has occurred for almost a decade. Molecular sieving media, which can exhibit gas separation properties superior to polymers, tend to be brittle and uneconomical to produce for large‐scale membrane separation processes. Considering this, the polymer structures investigated in this work were designed to mimic aspects of the structure of molecular sieving media such as zeolites and carbon molecular sieves while maintaining the processability associated with polymers. Significantly attractive gas separation material properties were obtained using hyper rigid polypyrrolone copolymers with controlled packing disruptions between flat, packable segments. The gas transport properties in the materials changed dramatically as a result of different average interchain spacing. Moreover, all of the polypyrrolones studied in this work exhibited performance lying on or above the existing O₂/N₂ upper bound trade‐off line between permselectivity and permeability. These results, therefore, may point the way to a new cycle of membrane materials improvements for gas separations. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1235–1249, 1999     

A novel correlation for estimation of hydrate forming condition of natural gases

An inherent problem with natural gas production or transmission is the formation of gas hydrates, which can lead to safety hazards to production/ transportation systems and to substantial economic risks. Therefore, an understanding of conditions where hydrates form is necessary to overcome hydrate related issues. Over the years, several models requiring more complicated and longer computations have been proposed for the prediction of hydrate formation conditions of natural gases. For these reasons, it is essential to develop a reliable and simple-to-use method for oil and gas practitioners. The purpose of this study is to formulate a novel empirical correlation for rapid estimation of hydrate formation condition of sweet natural gases. The developed correlation holds for wide range of temperatures (265–298 K), pressures (1200 to 40000 kPa) and molecular weights (16−29). New proposed correlation shows consistently accurate results across proposed pressure, temperature and molecular weight ranges. This consistency could not be matched by any of the widely accepted existing correlations within the investigated range. For all conditions, new correlation showed average absolute deviation to be less than 0.2% and provided much better results than the widely accepted existing correlations.     

WO3基气敏传感器*

气敏传感器已在生物、化学、航空、军事等领域获得了广泛的应用。鉴于WO₃基气敏传感器是检测H₂S、NO_x、O₃和NH₃等气体最有前景的新型氧化物气敏传感器之一,本文以不同的敏感气体为分类依据系统阐述了近年来WO₃基气敏传感器的研究进展,详细探讨了制备方法及贵金属掺杂对上述各种气体气敏性能的影响,并指出了目前WO₃基气敏传感器在研究过程中存在的问题。     

有毒有害气体报警器检测探讨

介绍了常见有毒有害气体检测报警器的分类。对气体检测报警器的检测方法进行探讨,为此类报警器的检测方法提供建议。     

体液中-叶萩碱检测方法的研究

本文报道了用气相色谱(GC)及气相色谱-质谱联用(GC/MS)检出人体液中一叶萩碱的方法.尿样经碱化后用乙醚直接萃取,回收率为72.1％;血浆样品用Sep-pak小柱提取,回收率为 43.9％,GC/MS的检测限为 20ng.方法快速、简便、准确.     

大气本底温室气体测量标准物质研究进展

综述了温室气体标准物质的制备技术与研究进展。归纳了温室气体标准物质种类和量值不确定度的要求,考察了各种配气技术对温室气体监测需求的适用性。综合讨论了配气技术中的稀释操作、钢瓶处理方式及阀门管线材质对温室气体标准物质量值稳定性的影响,并比较了BIPM和WMO量传体系的差异。     

非晶硅太阳能电池生产工艺用氣分析方法研究

本文对非晶硅太阳能电池制造工艺过程所用的无机氢化物烷类气体硅烷、硼烷、磷烷、甲烷和氢及其混合气的配制与分析方法进行了研究,以微机控制配气、检测程序、气相色谱法分成分析杂质,电容法测水分,方法已应用于工艺过程分析。     

4，4′－联苯二甲酸－酚酞／四溴酚酞共聚酯的气体透过性能

合成了一系列单体比例不同的４，４′－联苯二甲酸－酚酞／四溴酚酞共聚酯，并制成柔软透明的均质薄膜。测定了膜对氢气、氧气、氮气、二氧化碳、甲烷的气体透过性能，重点研究单体比例不同的共聚物中分子主链溴含量对气体透过性能的影响，发现随着四溴酚酞单体含量的增加，气体在聚合物中的溶解系数增大；扩散系数下降；气体透过系数在一定范围内存在较大值；分离系数的变化则不明显。结果表明在聚芳酯的芳环上引入适当含量的溴，可以提高聚合物的气体透过系数，而对分离系数的值影响不大。     

裂化气、乙炔尾气及产品乙炔中H_2S、CS_2的测定

原料天然气常含有300mg/m~3以上的硫化氢、甲硫醇、乙硫醇、甲硫醚、乙硫醚等硫化物,经脱硫精制处理后,仍有少量硫化物转入到裂化气、尾气、产品乙炔中。这些硫化物的存在对甲醇合成触媒和醋酸乙烯合成触媒均有不利影响。因此,硫化物的检测对生产控制极为     

Novel Test System for Gas Sensing Materials and Sensors

Summary: A growing interest in gas sensors necessitates the requirement for a test system that is reliable and capable of handling multiple gas analytes at various concentrations. Most test systems currently used do not incorporate some type of standard with which to verify the actual concentrations of the gas analytes being tested, but rather calculate concentrations indirectly. The problem is that the calculated concentrations rarely take into account any loss that may occur across the test system. The test system described herein uses a specialized gas chromatograph (GC) that is capable of detecting down to the ppb range. It can either be used to screen potential sensing materials or to verify the actual concentration being tested for a specific sensor.     

Storage possibilities for radioactive krypton (85Kr)

A review of the different storage possibilities for radioactive krypton (⁸⁵Kr) is given. Various strategies can be applied to store⁸⁵Kr safely over many decades: storage in pressure containers and encapsulation in various solid matrices.     

HP4890炼厂气色谱仪工作原理及应用

介绍了HP4890炼厂气色谱仪的工作原理及其在炼厂气、烟气等样品分析中的应用，并和其它分析方法进行了比较。     

气相色谱近年的发展

简要阐述了近几年气相色谱(GC)的发展和特点。GC是一个成熟的技术,广泛地应用于各个领域,近几年GC的发展除了继续研究新的固定相和高性能的毛细管色谱柱之外,主要在全二维气相色谱(GC×GC)、快速GC、便携式GC仪和微型GC仪几个方面。近几年新研究的GC固定相主要集中在常温离子液体和各种环糊精的衍生物。现在GC研究者趋向于使用商品化的GC毛细管柱,而商品化的GC毛细管柱应用最多的是以含5%苯基的聚甲基硅氧烷为固定相的色谱柱。GC×GC发展迅猛,特别是关于调制器的研究,已开发出十多种调制模式,并广泛地应用于各个领域。为了适应大量样品的分析和现场分析,研究和开发了多种快速GC方法和仪器以及便携式GC仪。为了仪器的小型化和专属性检测,μGC仪的研究也稳步地发展起来。     

THE MAZHUANG RESERVOIR IN THE JUNGGAR BASIN (Ⅰ)——GEOCHEMICAL CHARACTERISTICS OF NATURAL GAS

The Mazhuang gas reservoir is located in the eastern part of the Junggar Basin. Itsgas-producing pool is averagely 2000 m deep. It is a mid-shallow reservoir. The natural gasrich 2--7% of C_2-C_4 gaseous hydrocarbons is mainly composed of methane. δ~(13)C_(CH_4). valuesare--47----45‰, heavier than microbiogenic gas, and lighter than coal--type gas as well asoil--associated gas. The maternal materials of gas source rocks are primarily from the type-Ⅲ organic matter at the low--mature stage (0.5%相似文献   

标准气浓度对定量误差影响的探讨

In the trace gas analysis,experimental results show that the relative error can be kept in the range of±10% even in case where the difference in concentration between the standard mixture and sample gas is up to100 times.When the exponential dilution is used for calibration,the standard mixtures of higher concentra-tion with less period of time in the dilution procedure give quite accurate data.