基于SnO2为修饰层的Au-Pt / SnO2 / Au复合电极研究

用真空镀膜法在Au电极上沉积SnO₂薄膜，在HAuCl₄和H₂PtCl₄的混合溶液中利用直接还原法，将Au-Pt双金属纳米颗粒组装在SnO₂ / Au电极上，得到Au-Pt / SnO₂ / Au复合电极。采用SEM、TEM、XPS及CV曲线测定对Au-Pt / SnO₂ / Au复合电极进行了表征。结果表明:复合电极上双金属纳米颗粒分布均匀，粒子粒径约为25 nm左右。SnO₂作为修饰层以配位键与双金属纳米粒子结合。Au-Pt / SnO₂ / Au复合电极具有良好对甲醇氧化的电化学性能。     

Pt/巯基乙酸/玻碳电极的表面形貌与电催化性能

以巯基乙酸为偶联层在玻碳(GC)电极上组装 Pt纳米颗粒, 得到Pt /巯基乙酸/GC电极, 利用扫描电镜(SEM)和循环伏安法(CV)研究了不同条件下复合电极的表面形貌和电化学性能. 研究结果表明, 巯基乙酸在GC电极表面具有特性吸附, 形成了具有一定致密性的吸附层. 在0.5 mol/L H2SO4+1.0 mol/L CH3OH溶液中, 组装19 h的复合电极对甲醇氧化表现出较好的电催化性能.     

TiO2包覆不同微结构纳米碳纤维薄膜电极的光电化学性能

采用溶胶-凝胶法制备了TiO2包覆不同微结构的纳米碳纤维(Carbon nanofibers, CNF), 包括板式纳米碳纤维(Platelet-CNF, PCNF)和鱼骨式纳米碳纤维(Fish-bone-CNF, FCNF)的复合薄膜电极. 用光电流作用谱和光电流-电势图等方法研究了复合薄膜电极的光电化学性能. 研究结果表明, 复合薄膜电极表现出n型半导体特征, 薄膜中CNF的存在有助于光生电子和空穴有效地分离, 提高了光电转换效率, TiO2包覆PCNF薄膜电极在可见光范围内存在明显的光电响应.     

TiO_2/PtO-Pt复合膜和SnO_2/PtO-Pt复合膜氢敏性能的研究

将PtO Pt纳米粒子膜与TiO2 ,SnO2 纳米粒子膜复合 ,利用PtO Pt纳米粒子膜作为插入电极和催化剂 ,设计并研制出一类新型双层结构复合膜气体传感器 .采用TEM和SEM对薄膜的显微结构进行了表征 .对空气中 4 0 %H2 的氢敏性能研究表明 :2 0 0℃时 ,TiO2 /PtO Pt复合膜对氢气的灵敏度为 70 % ,而TiO2 纳米粒子膜无响应 .10 0℃时 ,SnO2 /PtO Pt复合膜的灵敏度为 92 % ,同样条件下 ,SnO2 纳米粒子膜的灵敏度仅为 4% .说明PtO Pt纳米粒子膜的催化作用能够显著提高TiO2 和SnO2 膜的氢敏性能 .另外 ,TiO2 /PtO Pt复合膜和SnO2 /PtO Pt复合膜均对空气中H2 有很高的选择性     

MoO3-TiO2/SiO2上光促表面催化甲烷和水合成甲醇和氢气

用分步等体积浸渍法制备了负载型复合半导体催化剂MoO3-TiO2/SiO2,通过XRD,BET,TPR,IR,UVDRS和TPD等手段对其进行了表征,结果表明,活性组分在载体表面高度分散,并具有量子尺寸效应,吸光阈值显著蓝移;TiO2在SiO2表面分散可增强MoO3与载体的相互作用,调变吸光性能,所形成的表面活性基元能够有效地吸附活化甲烷和水.在100℃下利用固定床环隙反应器借助紫外光的激发,通过“光-表面-热”协同作用,气相甲烷和水在MoO3-TiO2/SiO2表面生成了甲醇和氢,选择性达到85.6%.     

Au-Pt双金属纳米颗粒在玻碳电极上的自组装

利用硼氢化钠还原HAuCl4和H2PtCl4的混合溶液, 制备了Au- Pt双金属纳米颗粒. UV- Vis、TEM、ED、XRD、XPS等研究结果表明双金属纳米颗粒为Au- Pt合金. 在玻碳电极上通过有机偶联层半胱氨酸进行了Au- Pt双金属纳米颗粒的自组装, 得到Au- Pt/半胱氨酸/玻碳电极, 并通过SEM对其表面结构进行了表征, 粒子的平均粒径为12.6 nm. 用循环伏安法对Au- Pt/半胱氨酸/玻碳电极的电化学性能进行了测试. 结果表明Au- Pt/半胱氨酸/玻碳电极具有良好的电催化甲醇氧化性能.     

采用新颖喷墨打印技术制备的薄膜LiCoO2电极及其电化学性能

采用喷墨打印技术制备了LiCoO2薄膜电极. 用X射线衍射、扫描电镜(SEM)、循环伏安和恒电流充放电试验对薄膜电极进行结构表征和电化学性能测试. SEM结果表明, 所制备的薄膜电极表面粒子分布均匀, 厚度约为1.27 μm. 经过轻微热处理(450 ℃, 30 min)的薄膜LiCoO2电极呈现出稳定的充放电循环性能. 当以20 μA/cm2进行充放电时, 第50次循环容量保持率约为首次放电容量(81 mA·h/g)的87%, 10次循环后的充放电过程的充放电效率均接近100％.     

脉冲电沉积法制备Pt-TiO2 纳米管电极及其电催化性能

采用阳极氧化法在高纯钛片上原位组装TiO2纳米管阵列, 然后用脉冲电沉积方法将Pt沉积到TiO2纳米管阵列上, 制备出Pt-TiO2纳米管电极. 利用XRD和SEM对所获电极的微观结构和形貌进行表征, 结果表明, Pt纳米颗粒以花簇状分散在TiO2纳米管上, 晶粒大小约为25.6 nm. 对甲醇的电催化性能的研究结果表明, 脉冲电沉积制得的Pt-TiO2纳米管电极比TiO2纳米管电极和纯Pt片电极具有更高的电催化活性, 是Pt电极的40多倍.     

Au@Pt纳米粒子单层膜对甲醇氧化的电催化性能及SERS研究

通过种子生长法合成Au@Pt核壳结构纳米粒子,采用两相成膜法制备单层粒子膜,并转移获得Au@Pt核壳纳米粒子单层膜电极,该电极表面纳米粒子分布均匀,具有较大的比表面,对甲醇的氧化具有较好的电催化活性.研究表明,利用内核Au的长程电磁场增强效应,该单层膜表现出均匀且优良的表面增强拉曼散射(SERS)活性,适合作为基底在分子水平上研究表面的吸附和反应.获得了Au@Pt核壳纳米粒子单层膜表面甲醇电催化氧化过程的SERS光谱,为深入分析表面反应机理提供了实验依据.     

Determination of ascorbic acid using an electrode modified with cysteine self-assembled gold-platinum nanoparticles

We report on a new type of indium tin oxide (ITO) electrode for sensing ascorbic acid (AA). The ITO film was modified with gold-platinum alloy nanoparticles (Au-Pt NPs) functionalized with a self-assembled film of L-cysteine. The Au-Pt NPs were electrodeposited on the ITO film and characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. A cyclic voltammetric study revealed that the electrode exhibits excellent electrocatalytic activity towards the oxidation of AA. The calibration plot for AA is linear over the concentration range from 2 to 400???M with a correlation coefficient of 0.9991. The detection limit of AA is 1???M.

Preparation of Ru-doped SnO2-supported Pt catalysts and their electrocatalytic properties for methanol oxidation

Ru-doped SnO2 nanoparticles were prepared by chemical precipitation and calcinations at 823 K. Due to high stability in diluted acidic solution, Ru-doped SnO2 nanoparticles were selected as the catalyst support and second catalyst for methanol electrooxidation. The micrograph, elemental composition, and structure of the Ru-doped SnO2 nanoparticles were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction, respectively. The electrocatalytic properties of the Ru-doped SnO2-supported Pt catalyst (Pt/Ru-doped SnO2) for methanol oxidation have been investigated by cyclic voltammetry. Under the same loading mass of Pt, the Pt/Ru-doped SnO2 catalyst shows better electrocatalytic performance than the Pt/SnO2 catalyst and the best atomic ratio of Ru to Sn in Ru-doped SnO2 is 1/75. Additionally, the Pt/Ru-doped SnO2 catalyst possesses good long-term cycle stability.     

Electrochemical Sensor for Oxidation of NO Based on Au-Pt Nanoparticles Self-assembly Film

Au-Pt bimetallic nanoparticles film used as an efficient electrochemical sensor was prepared by self-assembled Au-Pt bimetallic nanoparticles on a glassy carbon (GC) substrate using thioglycolic acid as a linker. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that the Au-Pt nanoparticles self-assembly film was dense and uniform. Electrochemical experiments revealed that Au-Pt bimetallic nanoparticles film/GC electrode showed high electrocatalytic activity to the oxidation of nitric oxide.     

核-壳结构Au-Pt纳米粒子的光谱表征和电催化性能

用化学还原法合成了核-壳结构Au-Pt纳米粒子.紫外可见光谱(UV-Vis)、电化学循环伏安(CV)和透射电子显微镜(TEM)表征结果指出，所合成的核-壳结构Au-Pt纳米粒子为球形，平均直径为27 nm.以CO为分子探针，结合透射红外光谱研究，发现CO以孪生吸附态形式(COT)吸附在Au-Pt纳米粒子上，在2110 cm－1和2063 cm－1附近分别给出对称和反对称红外吸收峰. CV研究结果指出Au-Pt/GC电极对CO的氧化有较高的催化活性，起始氧化电位较本体Pt电极提前了0.45 V，峰电位提前了0.11 V.     

Polyamidoamine dendrimers-assisted electrodeposition of gold-platinum bimetallic nanoflowers

Novel Au-Pt bimetallic flower nanostructures fabricated on a polyamidoamine dendrimers-modified surface by electrodeposition are reported. These polyamidoamine dendrimers were stable, and they assisted the formation of Au-Pt bimetallic nanoflowers during the electrodeposition process. These nanoflowers were characterized by field-emitted scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction, and electrochemical methods. FE-SEM images showed that the bimetallic nanoflower included two parts: the "light" and the "pale" part. The two parts consisted of many small bimetallic nanoparticles, which was attributed to the progressive nucleation process. Moreover, the "light" part contained more bimetallic nanoparticles. The morphologies of bimetallic nanoflowers depended on the electrodeposition time and potential and the layer number of assembled dendrimers. The average size of nanoflowers increased with the increase in electrodeposition time. The layer number of assembled dendrimers obviously affected the size and morphologies of the "pale" parts of deposited nanoflowers. EDS and XPS indicated that the content of Au element was higher than that of Pt element in the nanoflowers. The bimetallic nanoflowers-modified electrode had electrochemical properties similar to those of bare gold and platinum electrodes. It also exhibited significant electrocatalytic activities toward oxygen reduction.     

SnO2-TiO2复合颗粒的形态结构及其光催化活性

在气溶胶反应器中,利用TiCl4高温氧化反应制备超细TiO2,采用均匀沉淀法在TiO2表面沉积SnO2,制备SnO2-TiO2复合颗粒,应用TEM、EDS、XRD、BET比表面积测试等手段对粒子进行表征。以活性艳红X-3B溶液为处理对象,考察复合颗粒的光催化活性。结果表明SnO2-TiO2复合颗粒的光催化活性较纯气相合成超细TiO2有较大提高,SnO2最佳含量为15.3%,SnO2-TiO2复合颗粒光催化活性的提高归因于不同能级半导体之间光生载流子的输运和分离。     

Immobilization of nickel-dipicolinic acid onto a glassy carbon electrode modified with bimetallic Au-Pt inorganic-organic hybrid nanocomposite: Application to micromolar detection of fructose

This work describes the electrochemical behavior of nickel-dipicolinic acid (Ni-DPA) film immobilized on the surface of bimetallic Au-Pt inorganic-organic hybrid nanocomposite glassy carbon electrode and its electrocatalytic activity toward the oxidation of fructose. The electrode possesses a three-dimensional (3D) porous network nano architecture, in which the bimetallic Au-Pt serving as metal nano-particle based microelectrode ensembles are distributed in the matrix of interlaced 3,3′,5,5′-tetramethylbenzidine (TMB) organic nanofibers (NFs). The surface structure and composition of the sensor was characterized by scanning electron microscopy (SEM). Electrocatalytic oxidation of fructose on the surface of modified electrode was investigated with cyclic voltammetry and chronoamperometry methods and the results show that the Ni-DPA film displays excellent electrochemical catalytic activities towards fructose oxidation. The hydrodynamic amperometry at rotating modified electrode at constant potential versus reference electrode was used for detection of fructose. Under optimized conditions the calibration plots are linear in the concentration range 0.5 to 70 μM and detection limit was found to be 0.1 μM.     

一维带状SnO2的电子传输性能

采用水辅助化学气相沉积法制备了结晶性好的一维带状SnO₂. 分别以小粒径锡粉和金修饰的小粒径锡粉作为反应原料制得带宽度不同的带状SnO₂, 小粒径锡粉作为反应原料能提高带状SnO₂的产率. 将所得SnO₂带和SnO₂纳米颗粒按不同比例混合配制成胶体, 采用刮涂法制备含不同比例纳米颗粒和纳米带的复合SnO₂薄膜并组装染料敏化太阳能电池(DSSCs)来评价带状SnO₂的电子输运性能. 组装的太阳能电池表现出与复合纳晶薄膜中一维SnO₂带的带宽度和所含比例密切相关的光电性能. 通过强度调制光电流谱的测量确定复合SnO₂薄膜的电子传输速率, 并进一步分析一维材料所具有的良好电子传输性能对光电流增加的贡献. 因为一维SnO₂带在复合纳晶薄膜中作为电子输运的快速通道可以加快电子的输运速度, 所以以适宜的比例添加具有合适宽度的一维SnO₂带可以明显提高太阳能电池的光电性能.