Thermosetting Shape Memory Polymers and Composites Based on Polybenzoxazine Blends,Alloys and Copolymers

When dealing with smart polymers, in particular with shape memory polymers, the polymer type and composition specify the overall material properties and in particular the extent of the shape memory effect. Polybenzoxazines as a polymer with high potential for structural applications represent a promising component for materials with both shape memory effect and structurally interesting material properties. This minireview gives insight into how the shape memory effect, in particular the shape recovery event, is influenced by internal factors such as polymer structure, morphology and external factors such as filler addition.     

Shape‐based virtual screening with volumetric aligned molecular shapes

Shape‐based virtual screening is an established and effective method for identifying small molecules that are similar in shape and function to a reference ligand. We describe a new method of shape‐based virtual screening, volumetric aligned molecular shapes (VAMS). VAMS uses efficient data structures to encode and search molecular shapes. We demonstrate that VAMS is an effective method for shape‐based virtual screening and that it can be successfully used as a prefilter to accelerate more computationally demanding search algorithms. Unique to VAMS is a novel minimum/maximum shape constraint query for precisely specifying the desired molecular shape. Shape constraint searches in VAMS are particularly efficient and millions of shapes can be searched in a fraction of a second. We compare the performance of VAMS with two other shape‐based virtual screening algorithms a benchmark of 102 protein targets consisting of more than 32 million molecular shapes and find that VAMS provides a competitive trade‐off between run‐time performance and virtual screening performance. © 2014 Wiley Periodicals, Inc.     

Automatic equipment with improved performances (ATD and DSC) in shape memory alloys studies

We describe an experimental set-up of high resolution thermal analysis (HRTA) activated by Peltier effect and computer-controlled by the signal processing that allows a high resolution programming of the temperature and a reproducibility better than ±0.01 deg.The basic equipment is suitable for studying the behaviour of the shape memory alloys (i.e. Cu based alloys). We also describe the applications of the system, which allows to build up a calorimetric system (heat flux or conduction calorimetry) (resolution 1.5 W) or a stress-strain-temperature system of 20 N of maximum charge (resolution around 1 mN and 0.1 m.CICYT projects MAT89-407-C03-01 and PETRI-90 are gratefully acknowledged. H. T. acknowledges the DGICYT (sabbatic program) for financial aid in international cooperation. The enlightening discussions with Dr. F. C. Lovey (Centro Atomico Bariloche - Argentina) are also acknowledged.     

Triple shape memory effect in multiple crystalline polyurethanes

Remembering more than one permanent shape is an attractive research topic for shape memory materials (SMMs). In this paper, multiple crystalline shape memory polyurethanes (SMPUs) are prepared with PCL10000 and PTMG2900 by a three‐step polymerization method. DSC and WAXD results show that the obtained polyurethane contains, simultaneously and independently, two kinds of crystals. In addition, it is confirmed through DMA analysis that reversible soft phase and hard domains are formed in the PCL‐PTMG based SMPU system; and two‐step modulus decreases at low temperature range can be obtained in the SMPU with suitable mass proportion of PCL to PTMG, e.g., 1:7. Thus, shape memory effect (SME) can be achieved in this system. Moreover, it is found that the PTMG soft segment dominates the shape memory effect when the PCL mass is lower than that of PTMG; while the PCL soft segment dominates the SME when PCL mass is higher than that of PTMG; and a two‐step programing shape recovery can be achieved when the mass proportion of PCL/PTMG reaches a balance value, e.g., 3:5. Copyright © 2009 John Wiley & Sons, Ltd.     

Ion-pair extractions by the use of planar and non-planar extracting solvents

The effect of extracting solvent was studied on the ion-pair extraction reactions with a special interest in the effect of molecular shape (planar or non-planar) of the solvent. The following two reactions were investigated: (HNN)_o + (Q⁺)_W (Q·NN)_o + (H⁺)_W (Extraction I); (Q-ClO₄)_o + (Pi^–)_w (Q·Pi)_o + (ClO ₄ ^– )_w (Extraction II), where HNN, NN^–, Pi^–, and Q⁺ represent 1-nitro-2-naphthol, its base form (1-nitro-2-naphtholate), picrate, and a cationic species, respectively. Above extraction equilibria were confirmed to hold in cases of various extracting solvents including planar solvents (1-chloronaphthalene, etc.) and non-planar solvents (1,2-dichloroethane, chloroform). An approximately linear relationship was found to exist between the extraction constants of Extraction I (logK _ex ^I ) and the Kosower's Z-value of extracting solvents. It was also found that the compatibility between the molecular shape of the ion-pair complexes and that of the extracting solvents affected the extractability to a considerable extent.     

Shape memory fiber spun with segmented polyurethane ionomer

The effect of cationic groups within hard segments on shape memory polyurethane (SMPU) fibers was studied and the cyclic tensile testing was conducted to assess the shape memory effect. Mechanical properties, hard segment crystallization, and dynamic mechanical properties of SMPU ionomer fibers composed of 1,4‐butanediol (BDO), N‐methyldiethanolamine (NMDA), 4,4′‐methylenebis(phenyl isocyanate) (MDI), and poly(butylene adipate)diol (PBA) were investigated using a universal tensile tester, differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The results demonstrate that only 2 wt% NMDA can significantly change the glass transition temperature of the soft segment phase. DSC shows that the ionic group within hard segments can facilitate the crystallization of hard segments in unsteamed SMPU ionomer fibers. But for steamed fiber specimens, this effect is insignificant. Moreover, the ionic groups in hard segments with different hard segment contents (HSC) have different effects. In unsteamed fibers with 64 wt% HSC, 2 wt% NMDA increases the glass transition of soft segments from 63.5 to 70.6°C. However, in fibers with 55 wt% HSC, the glass transition temperature is lowered from 46.7 to 33.5°C. The post‐treatment, high‐pressure steaming is an effective way to remove the internal stress and subsequently improve the dimensional stability of SMPU ionomer fibers. Copyright © 2008 John Wiley & Sons, Ltd.     

形状记忆聚合物及其应用

形状记忆材料可对热、化学、机械、光、磁或电等外加刺激的触发作出响应,从而改变自身的技术参数。形状记忆聚合物作为一类重要的形状记忆材料,在航空航天、生物医学、电力电子、包装、智能控制系统等领域具有广泛的应用。分析了形状记忆聚合物的形状记忆机理,并介绍了几类常见的形状记忆聚合物及其在各领域中的应用,最后提出了形状记忆材料研究中的一些不足及解决措施。     

SDOVS: A solvent dipole ordering‐based method for virtual screening

We previously reported that solvent dipole ordering (SDO) at the ligand binding site of a protein indicates an outline of the preferred shape and binding pose of the ligands. We suggested that SDO‐mimetic pseudo‐molecules that mimic the 3D shape of the SDO region could be used as molecular queries with a shape similarity matching method in virtual screening. In this work, a virtual screening method based on SDO, named SDOVS, was proposed. This method was applied to virtual screening of ligands for four typical drug target proteins and the performance compared with that of FRED (well‐known rigid docking method); the efficiency of SDOVS was demonstrated to be better than FRED. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Radiation crosslinked Polyolefinic blends: exploring thermally tuned dual Shape Memory character

Shape memory behavior of thermally triggered polymeric materials based on ethylene octene copolymer (EOC) and ethylene propylene diene rubber (EPDM) has been studied in details. Investigation of the shape memory behavior of uncrosslinked EOC–EPDM and electron beam crosslinked EOC–EPDM blends have been pursued thoroughly. Shape memory study has been carried out at 60°C, which shows that with the effect of electron beam radiation shape fixity behavior of the crosslinked blends becomes poor as compared with its uncrosslinked blend system whereas the improvement in shape recovery behavior takes place after the exposure to electron beam radiation. Morphology study by Atomic Force Microscopy (AFM) and crystallinity study by X‐ray diffraction analysis also give the clear idea regarding the formation of crosslinked network structure. Improvement in gel content with increasing radiation dose supports the formation of network structure. Even after the crosslinking in presence of electron beam radiation also, it has been found that crosslinked EPDM rich blends is superior in terms of shape memory behavior point of view. Lower decay of stress value coupled with lower relaxation ratio of crosslinked EPDM rich blend support its superior shape memory behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

Vital significance of addition of “shape similarity” between solutes to shape complementarity for more precise molecular recognition in aqueous binary solvents

Precise and specific molecular recognition is vital to living systems. Discrimination has mainly been studied by using particular host molecules (e.g., crown ethers, cyclodextrin and urea derivatives). Several studies in various fields have pointed out that the famous “lock‐and‐key theory” (the concept of shape complementarity) is, at present, insufficient for understanding precise discrimination. This seems to come from the fact that various types of intermolecular interactions are decisive in such discrimination. This Review intends to describe the novel concept that “shape similarity” between interacting solutes should be added to “shape complementarity” for more precise discrimination to be achieved. Further, the role of shape similarity between solvent and solute molecules is also described. In relation to precise molecular recognition, weak interactions, which depend on the three‐dimensional shape of substituents (shape‐specific weak interactions), are described. Possibility of alterations in solvent structures is discussed in aqueous binary solvents. DOI 10.1002/tcr.201100001     

A Novel Side-Chain Liquid Crystal Elastomer Exhibiting Anomalous Reversible Shape Change

Liquid crystalline elastomers (LCEs) have been actively investigated as stimuli-controlled actuators and soft robots. The basis of these applications is the ability of LCEs to undergo a reversible shape change upon a liquid crystalline (LC)-isotropic phase transition. Herein, we report the synthesis of a novel LCE based on a side-chain liquid crystalline polymer (SCLCP). In contrast to known LCEs, this LCE exhibits a striking anomalous shape change. Subjecting a mechanically stretched monodomain strip to LC-disorder phase transition, both the length and width of the strip contract in isotropic phase, and both elongate in LC phase. This thermally induced behaviour is the result of a subtle interplay between the relaxation of polymer main chain oriented along the stretching direction and the disordering of side-group mesogens oriented perpendicularly to the stretching direction. This finding points out potential design of LCEs of this peculiar type and possible applications to exploit.     

Shape Memory Particles Capable of Controlled Geometric and Chemical Asymmetry made from Aliphatic Polyesters

A novel method for producing monodisperse micro‐ and nanosized shape memory particles from various shape memory polymers (SMPs) is reported. This method uses a polydimethylsiloxane mold to uniformly deform particles from complex shapes to other well‐defined shapes, harvest them without aggressive solvents or heat, and then return them to their original shapes upon heating above a preselected trigger temperature. By manipulating the material properties of both the mold and SMP, monodisperse asymmetric particles are easily achieved. This method is demonstrated with traditional SMPs and polymers with varying degrees of reactive functionality, crystallinity, and transition temperature. This additional reactivity and the robustness of this system allow easy tailoring of the surface with click chemistry to achieve chemical asymmetry.

     

A Novel Side‐Chain Liquid Crystal Elastomer Exhibiting Anomalous Reversible Shape Change

Liquid crystalline elastomers (LCEs) have been actively investigated as stimuli‐controlled actuators and soft robots. The basis of these applications is the ability of LCEs to undergo a reversible shape change upon a liquid crystalline (LC)‐isotropic phase transition. Herein, we report the synthesis of a novel LCE based on a side‐chain liquid crystalline polymer (SCLCP). In contrast to known LCEs, this LCE exhibits a striking anomalous shape change. Subjecting a mechanically stretched monodomain strip to LC‐disorder phase transition, both the length and width of the strip contract in isotropic phase, and both elongate in LC phase. This thermally induced behaviour is the result of a subtle interplay between the relaxation of polymer main chain oriented along the stretching direction and the disordering of side‐group mesogens oriented perpendicularly to the stretching direction. This finding points out potential design of LCEs of this peculiar type and possible applications to exploit.     

Shape analysis of macromolecular electron densities

Macromolecular shape analysis, an important aspect of the interpretation and prediction of biochemical behavior, pharmaceutical drug action, and the properties of advanced materials, is a task of a high level of complexity, where both global shape features and detailed, local shape features are relevant. The methods developed for the study of shapes of small molecules, in terms of molecular isodensity contours (MIDCOs), are not ideally suited for large molecular systems. In particular, the shape analysis of ab initio quality macromolecular electron densities, obtained by the MEDLA (molecular electron density lego assembler) method, requires a new approach. In this contribution, the adaptation of the earlier shape group approach to the electron densities of large molecules, and two new techniques, the shape globe folding map and the self-avoiding MIDCO methods, will be described.     

Two-way shape memory behavior of styrene-based bilayer shape memory polymer plate

In this work, a bilayer shape memory polymer (SMP) composite plate with two-way shape memory behavior is simulated, in which two types of styrene-based SMPs with well-separated glass transition temperatures are assembled in parallel. The finite element (FE) software ABAQUS is selected to exhibit the two-way shape memory effect during the shape recovery step and the Generalized Maxwell Model with the WLF equation is applied to characterize the temperature-dependent properties of the SMP bilayer plates. The effect factors of axial predeformation, thermal expansion coefficient and plate thickness are all considered for the two-way shape memory behavior of the styrene-based bilayer SMP plate. After that, a smart gripper composed of four SMP composite plates is proposed to realize grabbing and releasing functions for one-step and staged heating recovery. The FE results provide some necessary theoretical guidelines for future soft smart structural designs and optimization.     

Ultrafast shape recognition to search compound databases for similar molecular shapes

Finding a set of molecules, which closely resemble a given lead molecule, from a database containing potentially billions of chemical structures is an important but daunting problem. Similar molecular shapes are particularly important, given that in biology small organic molecules frequently act by binding into a defined and complex site on a macromolecule. Here, we present a new method for molecular shape comparison, named ultrafast shape recognition (USR), capable of screening billions of compounds for similar shapes using a single computer and without the need of aligning the molecules before testing for similarity. Despite its extremely fast comparison rate, USR will be shown to be highly accurate at describing, and hence comparing, molecular shapes.     

Ultra low density and highly crosslinked biocompatible shape memory polyurethane foams

We report the development of highly chemically crosslinked, ultra low density (～0.015 g/cc) polyurethane shape memory foams synthesized from symmetrical, low molecular weight, and branched hydroxyl monomers. Sharp single glass transitions (T_g) customizable in the functional range of 45–70 °C were achieved. Thermomechanical testing confirmed shape memory behavior with 97–98% shape recovery over repeated cycles, a glassy storage modulus of 200–300 kPa, and recovery stresses of 5–15 kPa. Shape holding tests under constrained storage above the T_g showed stable shape memory. A high volume expansion of up to 70 times was seen on actuation of these foams from a fully compressed state. Low in vitro cell activation induced by the foam compared with controls demonstrates low acute bio‐reactivity. We believe these porous polymeric scaffolds constitute an important class of novel smart biomaterials with multiple potential applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Revealing Triple‐Shape Memory Effect by Polymer Bilayers

Bilayer polymers that consist of two epoxy dual‐shape memory polymers of well‐separated glass transition temperatures have been synthesized. These bilayer epoxy samples exhibit a triple‐shape memory effect (TSME) with shape fixities tailorable by changing the ratio between the two layers. The triple‐shape fixities of the bilayer epoxy polymers can be explained by the balance of stress between the two layers. Based on this work, it is believed that the following three molecular design criterions should be considered in designing triple‐shape memory polymers with optimum TSME: 1) well‐separated thermal transitions, 2) a strong interface, and 3) an appropriate balance of moduli and relative ratios between the layers (or microphases).

     

Similarity of molecular shape

Summary The similarity of one molecule to another has usually been defined in terms of electron densities or electrostatic potentials or fields. Here it is expressed as a function of the molecular shape. Formulations of similarity (S) reduce to very simple forms, thus rendering the computerised calculation straightforward and fast. Elements of similarity are identified, in the same spirit as elements of chirality, except that the former are understood to be variable rather than present-or-absent. Methods are presented which bypass the time-consuming mathematical optimisation of the relative orientation of the molecules. Numerical results are presented and examined, with emphasis on the similarity of isomers. At the extreme, enantiomeric pairs are considered, where it is the dissimilarity (D=1–S) that is of consequence. We argue that chiral molecules can be graded by dissimilarity, and show that D is the shape-analog of the chirality coefficient, with the simple form of the former opening up numerical access to the latter.The late Amatz Meyer was formerly of the Department of Organic Chemistry, Hebrew University, Jerusalem 91904, Israel.