Facile Preparation and Lithium Storage Properties of TiO2@Graphene Composite Electrodes with Low Carbon Content

Over the past decade, TiO₂/graphene composites as electrodes for lithium ion batteries have attracted a great deal of attention for reasons of safety and environmental friendliness. However, most of the TiO₂/graphene electrodes have large graphene content (9–40 %), which is bound to increase the cost of the battery. Logically, reducing the amount of graphene is a necessary part to achieve a green battery. The synthesis of TiO₂ nanosheets under solvothermal conditions without additives is now demonstrated. Through mechanical mixing TiO₂ nanosheets with different amount of reduced graphene (rGO), a series of TiO₂@graphene composites was prepared with low graphene content (rGO content 1, 2, 3, and 5 wt %). When these composites were evaluated as anodes for lithium ion batteries, it was found that TiO₂+3 wt % rGO manifested excellent cycling stability and a high specific capacity (243.7 mAh g^?1 at 1 C; 1 C=167.5 mA g^?1), and demonstrated superior high‐rate discharge/charge capability at 20 C.     

Single-step solvothermal synthesis of mesoporous anatase TiO<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for the abatement of organic pollutants

In the present work, we have fabricated a novel mesoporous TiO₂–rGO nanocomposite by a facile one-step solvothermal method using titanic sulfate as the TiO₂ source. The as-prepared composites were characterized by transmission electron microscopy, X-ray diffraction; UV–Vis diffuse reflectance spectra, X-ray photoelectron spectroscopy and photoluminence spectra. In situ nucleation and anchoring of TiO₂ nanoparticles onto a graphene sheet is favorable fpr forming an intimate interfacial contact, and the chemically bonded TiO₂–rGO nanocomposites commendably enhanced their photocatalytic activity in the photodegradation of rhodamine B and phenol. The high photocatalytic activity of the as-synthesized nanocomposites are primarily ascribed to the mesoporous structure, efficient charge transportation and separation with enhanced visible light absorption, which come from the appealing nanoarchitecture, for instance, ultra-dispersed and ultra-small TiO₂ nanocrystals along with intimate and absolute interfacial contact between the TiO₂ nanocrystals and the graphene sheet.     

聚丙烯/硫酸钡复合体系的界面相互作用与流变性质和结晶行为的关系

制备了一系列具有不同界面状态的聚丙烯 (PP) 硫酸钡 (BaSO4)复合体 .PP BaSO4的界面分别用硅烷、硬脂酸、马来酸酐接枝聚丙烯 (PP g MAH)改性 .研究表明 ,填充体系的熔体粘度和熔体弹性均高于基体 .以硅烷和PP g MAH进行界面改性后 ,PP BaSO4的界面相互作用加强 ,导致复合体系中的熔体粘度和熔体弹性进一步提高 ,同时BaSO4对PP的成核活性提高 .填料用硬脂酸处理后 ,硬脂酸能够在填料粒子表面上形成一个包覆层 ,使粒子与PP的亲和性改善 .同时该包覆层具有润滑作用 ,使得复合体系的熔体粘度和熔体弹性下降 ,并使得该体系中BaSO4的成核活性低于硅烷和处理的体系 .本文探讨了由复合体系的熔体粘度定量比较填充复合体系中聚合物 填料界面相互作用的方法 ,讨论了界面改性对复合体系流变性质和结晶行为影响的机理     

TiO2 nanoparticles/poly(butylene adipate‐co‐terephthalate) bionanocomposite films for packaging applications

In this present study, biodegradable PBAT nanocomposites containing different weight percentages (1, 3, 5, 7, and 10% w/w) of TiO₂ nanoparticles were prepared by using solvent casting technique, chloroform as a solvent. The microstructure and morphology of the as‐synthesized poly(butylene adipate‐co‐terephthalate) (PBAT)/TiO₂ nanocomposite films were characterized by Fourier‐transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscope. The thermal degradation of PBAT composites was studied by using thermogravimetric analysis. The mechanical strength of the films was improved by increasing TiO₂ concentration. Tensile strength increased from 32.60 to 63.26 MPa, respectively. Barrier properties of the PBAT/TiO₂ nanocomposites were investigated by using an oxygen permeability tester. The oxygen permeability (oxygen transmission rate) decreased with increasing the TiO₂ nanoparticle concentrations. The PBAT/TiO₂ nanocomposite films showed profound antimicrobial activity against both Gram‐positive and Gram‐negative foodborne pathogenic bacteria, namely, Escherichia coli and Staphylococcus aureus, to understand to the zone of inhibition. These results indicated that filler–polymer interaction is important and the role of the TiO₂ as a reinforcement in the nanocomposites was evident. Copyright © 2017 John Wiley & Sons, Ltd.     

Ultrasonic Preparation of Hierarchical Graphene‐Oxide/TiO2 Composite Microspheres for Efficient Photocatalytic Hydrogen Production

Hierarchical graphene oxide (GO)‐TiO₂ composite microspheres with different GO/TiO₂ mass ratios were successfully prepared by mixing GO and TiO₂ microspheres under ultrasonic conditions. Ultrasonication helped the GO and TiO₂ microsphere to uniformly mix on the microscale. The results showed that the GO‐TiO₂ composites that were prepared by ultrasonic mixing exhibited significantly higher hydrogen‐evolution rates than those that were synthesized by simple mechanical grinding, owing to synergetic effects, including enhanced light absorption and scattering, as well as improved interfacial charge transfer because of the excellent contact between the GO sheets and TiO₂ microspheres. In addition, GO‐TiO₂‐3 (3 wt. % GO) showed the highest hydrogen‐generation rate (305.6 μmol h^?), which was about 13 and 3.3‐times higher than those of TiO₂ microsphere and GO‐P25 (with 3 wt. % GO), respectively. Finally, a tentative mechanism for hydrogen production is proposed and supported by photoluminescence and transient photocurrent measurements. This work highlights the potential applications of GO‐TiO₂ composite microspheres in the field of clean‐energy production.     

Interfacial interaction in EVA‐carbon nanotube and EVA‐clay nanocomposites

Proper filler‐matrix compatibility is a key factor in view of obtaining nanocomposites with well‐dispersed nanofillers displaying enhanced properties. In this respect, polymer‐filler interaction can be improved by a proper combination of matrix and nanofiller polarities. This is explored for matrices ranging from nonpolar high density poly(ethylene) to ethylene‐vinyl acetate (EVA) copolymers with varying vinyl acetate contents, in combination with several types of organoclay or carbon nanotubes. A novel in situ characterization methodology using modulated temperature differential scanning calorimetry is presented to evaluate the matrix‐filler interaction. During quasi‐isothermal crystallization of the matrix, an “excess” contribution is observed in the recorded heat capacity signal because of reversible melting and crystallization. Its magnitude considerably decreases upon addition of nanofiller in case of strong interfacial interaction, whereas the influence is moderate in case of a less interacting matrix‐filler combination. It is suggested that the “excess heat capacity” can be used to quantify the segmental mobility of polymer chains in the vicinity of the nanofiller. Hence it provides valuable information on the strength of interaction, governed by the physical and chemical nature of matrix and filler. Heating experiments subsequent to quasi‐isothermal crystallization point at a certain degree of molecular ordering, responsible for crystal nucleation in EVA copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1291–1302, 2007     

Investigation of photo‐oxidative effect on morphology and degradation of mechanical and physical properties of nano CaCO3 silicone rubber composites

Photo‐oxidative degradation of treated and untreated nano CaCO₃: silicone rubber composite was studied under accelerated UV irradiation (≥290 nm) at different time intervals. Prolonged exposure to UV leads to a progressive decrease in mechanical and physical properties along with the change in behavior of filler‐matrix interaction. This was due to decrease in cross‐linking density with increase in mobility of rubber chains. Meanwhile, synthesized nano CaCO₃ was modified with stearic acid for uniform dispersion in rubber matrix. The increase in carbonyl (>CO), hydroxyl (? OH), CO₂, and alkene functional groups on the UV exposed surface of treated and untreated nano CaCO₃: silicone rubber composites at different time intervals was studied using Fourier transform infrared (FTIR) spectroscopy. The change in morphological behavior of filler‐matrix interaction after UV exposure was studied using SEM. Overall, the study showed that the treated nano CaCO₃: silicone composites were affected more by UV exposure than untreated nano CaCO₃: silicone composites and pristine composite after UV exposure. This effect was due to peeling of stearic acid from the surface of CaCO₃, which makes the rubber chains slippery and thus separation of filler and rubber chains takes place with initiation of fast‐degradation. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and kinetics of graft polymerization of methyl methacrylate from the RAFT coordinated surface of nano‐TiO2

Polymer chains of PMMA were grown from nano titania (n‐TiO₂) by the reversible addition‐fragmentation chain transfer polymerization process. The mechanism and kinetics of MMA polymerization from both solution and “grafted from” n‐TiO₂ were studied. The RAFT agent, 4‐cyano‐4‐(dodecylsulfanylthiocarbonyl) sulfanyl pentanoic acid, with an available carboxyl group was used to anchor onto the n‐TiO₂ surface, with the S?C(SC₁₂H₂₅) moiety used for subsequent RAFT polymerization of MMA to form n‐TiO₂/PMMA nanocomposites. The functionalization of n‐TiO₂ was determined by FTIR, XPS, partitioning studies, and thermal analysis. The livingness of the polymerization was verified using NMR and GPC, while the dispersion of the inorganic filler in the polymer was studied using electron microscopy, FTIR, and thermal analysis. The monomer conversion and molecular weight kinetics were explored for the living RAFT polymerization, both in solution and grafted from n‐TiO₂, with first‐order kinetics being observed in both cases. Increased graft density on n‐TiO₂ led to a lower rate of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3926–3937, 2008     

Structure and properties of star‐shaped solution‐polymerized styrene‐butadiene rubber and its co‐coagulated rubber filled with silica/carbon black‐I: morphological structure and mechanical properties

The morphological structure and mechanical properties of the star‐shaped solution‐polymerized styrene‐butadiene rubber (SSBR) and organically modified nanosilica powder/star‐shaped SSBR co‐coagulated rubber (N‐SSBR) both filled with silica/carbon black (CB) were studied. The results showed that, compared with SSBR, silica powder could be mixed into N‐SSBR much more rapidly, and N‐SSBR/SiO₂ nanocomposite had better filler‐dispersion and processability. N‐SSBR/SiO₂/CB vulcanizates displayed higher glass‐transition temperature and lower peak value of internal friction loss than SSBR/SiO₂/CB vulcanizates. In the N‐SSBR/SiO₂/CB vulcanizates, filler was dispersed in nano‐scale resulting in good mechanical properties. Composites filled with silica/CB doped filler exhibited more excellent mechanical properties than those filled with a single filler because of the better filler‐dispersion and stronger interfacial interaction with macromolecular chains. N‐SSBR/SiO₂/CB vulcanizates exhibited preferable performance in abrasion resistance and higher bound rubber content as the blending ratio of silica to CB was 20:30. Copyright © 2008 John Wiley & Sons, Ltd.     

Mechanical properties of surface treated UHMWPE fiber and SiO2 filled PMMA composites

The hybrid reinforcement effect of surface‐treated UHMWPE fiber and SiO₂ on the mechanical properties of PMMA matrix composites was investigated. When UHMWPE fiber is introduced, the tensile strength of UHMWPE fiber‐reinforced composites sharply increases. The flexural modulus was enhanced with an increase in filler loading. Flexural modulus of the treated UHMWPE/SiO₂/PMMA composites was higher than that of the UHMWPE/PMMA and UHMWPE/SiO₂/PMMA composites. The outcome of the better interfacial bonding between the filler and the matrix is reflected in the improvement of the mechanical properties of the treated UHMWPE/SiO₂/PMMA composites. Copyright © 2017 John Wiley & Sons, Ltd.     

Evaluating the electrochemical properties of PEO‐based nanofibrous electrolytes incorporated with TiO2 nanofiller applicable in lithium‐ion batteries

In the present work, nanofibrous composite polymer electrolytes consist of polyethylene oxide (PEO), ethylene carbonate (EC), propylene carbonate (PC), lithium perchlorate (LiClO₄), and titanium dioxide (TiO₂) were designed using response surface method (RSM) and synthesized via an electrospinning process. Morphological properties of the as‐prepared electrolytes were studied using SEM. FTIR spectroscopy was conducted to investigate the interaction between the components of the composites. The highest room temperature ionic conductivity of 0.085 mS.cm^?1 was obtained with incorporation of 0.175 wt. % TiO₂ filler into the plasticized nanofibrous electrolyte by EC. Moreover, the optimum structure was compared with a film polymeric electrolyte prepared using a film casting method. Despite more amorphous structure of the film electrolyte, the nanofibrous electrolyte showed superior ion conductivity possibly due to the highly porous structure of the nanofibrous membranes. Furthermore, the mechanical properties illustrated slight deterioration with incorporation of the TiO₂ nanoparticles into the electrospun electrolytes. This investigation indicated the great potential of the electrospun structures as all‐solid‐state polymeric electrolytes applicable in lithium ion batteries.     

Understanding the Electronic Structures of Graphene Quantum Dot Physisorption and Chemisorption onto the TiO2 (110) Surface: A First‐Principles Calculation

We investigated the interfacial electronic structure and charge transfer properties of graphene quantum dot (GQD) physisorption and chemisorption on the TiO₂ (110) surface from density functional theory calculations. The simulations show that a slight charge transfer occurs in physisorption case while a significant charge transfer takes place in chemisorption configuration. We present a detailed comparison of the similarities and differences between the electronic structures. The similarities originate from the positive work function difference in both the physisorption and chemisorption configurations, which is able to drive electron transfer from GQD into TiO₂, leading to charge separation across the GQD–TiO₂ interface. The differences stem from the interaction between the GQD and TiO₂ substrate. For example, GQD bounds to TiO₂ surface through van der Waals interactions in the case of physisorption. In the chemisorption configuration, however, there exists strong covalent bonding between them. This leads to much more efficient charge separation for chemisorption than for physisorption. Furthermore, the GQD–TiO₂ composites show large band‐gap narrowing that could extend the optical absorption edge into the visible‐light region. This should imply that chemisorbed GQDs produce a composite with better photocatalytic and photovoltaic performance than composites formed through physisorption.     

Amine‐Appended Hierarchical Ca‐A Zeolite for Enhancing CO2/CH4 Selectivity of Mixed‐Matrix Membranes

An amine‐appended hierarchical Ca‐A zeolite that can selectively capture CO₂ was synthesized and incorporated into inexpensive membrane polymers, in particular polyethylene oxide and Matrimid, to design mixed‐matrix membranes with high CO₂/CH₄ selectivities. Binary mixture permeation testing reveals that amine‐appended mesoporous Ca‐A is highly effective in improving CO₂/CH₄ selectivity of polymeric membranes. In particular, the CO₂/CH₄ selectivity of the polyethylene oxide membrane increases from 15 to 23 by incorporating 20 wt % amine‐appended Ca‐A zeolite. Furthermore, the formation of filler/polymer interfacial defects, which is typically found in glassy polymer‐zeolite pairs, is inhibited owing to the interaction between the amine groups on the external surface of zeolites and polymer chains. Our results suggest that the amine‐appended hierarchial Ca‐A, which was utilized in membrane fabrication for the first time, is a good filler material for fabricating a CO₂‐selective mixed‐matrix membrane with defect‐free morphology.     

Investigation of clay modifier effects on the structure and rheology of supercritical carbon dioxide‐processed polymer nanocomposites

Superior property enhancements in polymer–clay nanocomposites can be achieved if one can significantly enhance the nanoclay dispersion and polymer–clay interactions. Recent studies have shown that nanoclays can be dispersed in polymers using supercritical carbon dioxide (scCO₂). However, there is need for a better understanding of how changing the clay modifier affects the clay dispersability by scCO₂ and the resultant nanocomposite rheology. To address this, the polystyrene (PS)/clay nanocomposites with “weak” interaction (Cloisite 93A clay) and “strong” interaction (Cloisite 15A clay) have been prepared using the supercritical CO₂ method in the presence of a co‐solvent. Transmission electron microscopy images and small‐angle X‐ray diffraction illustrate that composites using 15A and 93A clays show similar magnitude of reduction in the average tactoid size, and dispersion upon processing with scCO₂. When PS and the clays are coprocessed in scCO₂, the “dispersion” of clays appears to be independent of modifier or polymer–clay interaction. However, the low‐frequency storage modulus in the scCO₂‐processed 15A nanocomposites is two orders of magnitude higher than that of 93A nanocomposites. It is postulated that below percolation (solution blended composites), the strength of polymer–clay interaction is not a significant contributor to rheological enhancement. In the scCO₂‐processed nanocomposites the enhanced dispersion passes the percolation threshold and the interactions dictate the reinforcement potential of the clay–polymer–clay network. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 823–831, 2010     

A facile “graft from” method to prepare molecular‐level dispersed graphene–polymer composites

Graphene–polymer composites of positive‐charged poly(dimethyl aminoethyl acrylate), negative‐charged poly(acrylic acid), and neutral polystyrene were prepared by “graft from” methodology using reversible addition fragmentation chain transfer (RAFT) polymerization via a pyrene functional RAFT agent (PFRA) modified graphene precursor. Fluorescence spectroscopy and attenuated total reflection infrared (ATR‐IR) evidenced that the PFRA was attached on the graphene basal planes by π–π stacking interactions, which is strong enough to anti‐dissociation in the polymerization mixture up to 80°C. Atomic force microscopy (AFM) revealed that the thickness of a graphene–polymer sheet was about 4.0 nm. Graphene composites of different polymers with the same polymerization degree exhibited similar conductivity; however, when the polymer chain was designed as random copolymer the conductivity was significantly decreased. It was also observed that the longer the grafted polymer chains the lower the conductivity. ATR‐IR spectroscopy and thermogravimetric analysis were also performed to characterize the as‐prepared composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

In situ growth of TiO2 in interlayers of expanded graphite for the fabrication of TiO2-graphene with enhanced photocatalytic activity

We present a facile route for the preparation of TiO₂–graphene composites by in situ growth of TiO₂ in the interlayer of inexpensive expanded graphite (EG) under solvothermal conditions. A vacuum‐assisted technique combined with the use of a surfactant (cetyltrimethylammonium bromide) plays a key role in the fabrication of such composites. Firstly, the vacuum environment promotes full infusion of the initial solution containing Ti(OBu)₄ and the surfactant into the interlayers of EG. Subsequently, numerous TiO₂ nanoparticles uniformly grow in situ in the interlayers with the help of the surfactant, which facilitates the exfoliation of EG under the solvothermal conditions in ethanol, eventually forming TiO₂–graphene composites. The as‐prepared samples have been characterized by Raman and FTIR spectroscopies, SEM, TEM, AFM, and thermogravimetic analysis. It is shown that a large number of TiO₂ nanoparticles homogeneously cover the surface of high‐quality graphene sheets. The graphene exhibits a multi‐layered structure (5–7 layers). Notably, the TiO₂–graphene composite (only 30 wt % of which is TiO₂) synthesized by subsequent thermal treatment at high temperature under nitrogen shows high photocatalytic activity in the degradation of phenol under visible and UV lights in comparison with bare Degussa P25. The enhanced photocatalytic performance is attributed to increased charge separation, improved light absorbance and light absorption width, and high adsorptivity for pollutants.     

Graphene‐polymer nanocomposites for biomedical applications

Despite the significant efforts in the synthesis of new polymers, the mechanical properties of polymer matrices can be considered modest in most cases, which limits their application in demanding areas. The isolation of graphene and evaluation of its outstanding properties, such as high thermal conductivity, superior mechanical properties, and high electronic transport, have attracted academic and industrial interest, and opened good perspectives for the integration of graphene as a filler in polymer matrices to form advanced multifunctional composites. Graphene‐based nanomaterials have prompted the development of flexible nanocomposites for emerging applications that require superior mechanical, thermal, electrical, optical, and chemical performance. These multifunctional nanocomposites may be tailored to synergistically combine the characteristics of both components if proper structural and interfacial organization is achieved. The investigations carried out in this aim have combined graphene with different polymers, leading to a variety of graphene‐based nanocomposites. The extensive research on graphene and its functionalization, as well as polymer graphene composites, aiming at applications in the biomedical field, are reviewed in this paper. An overview of the polymer matrices adequate for the biomedical area and the production techniques of graphene composites is presented. Finally, the applications of such nanocomposites in the biomedical field, particularly in drug delivery, wound healing, and biosensing, are discussed.     

Thermosensitive graphene nanocomposites formed using pyrene‐terminal polymers made by RAFT polymerization

Thermosensitive graphene‐polymer composites have been prepared by attaching poly(N‐isopropylacrylamide) (PNIPAAm) onto the basal plane of graphene sheets via π‐π stacking. Pyrene‐terminated PNIPAAm was synthesized using reversible addition fragmentation chain transfer (RAFT) polymerization via a pyrene‐functional RAFT agent. Aqueous solutions of the graphene‐polymer composites were stable and thermosensitive. The lower critical solution temperature (LCST) of pyrene‐terminated PNIPAAm was measured to be 33 °C. When the pyrene‐functional polymer was attached to graphene the resultant composites were also thermosensitive in aqueous solutions exhibiting a reversible suspension behavior at 24 °C. Atomic force microscopy (AFM) analysis revealed that the thickness of a graphene‐PNIPAAm (M_n: 10,000 and PDI: 1.1) sheet was ～5.0 nm. The surface coverage of polymer chains on the graphene basal plane was calculated to be 7.2 × 10^?11 mol cm^?2. The graphene‐PNIPAAm composite material was successfully characterized using X‐ray photoelectron spectroscopy (XPS), attenuated total reflection infrared (ATR‐IR) spectroscopy, and thermogravimetric analysis (TGA). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 425–433, 2010     

TiO2–B Nanosheets/Anatase Nanocrystals Co‐Anchored on Nanoporous Graphene: In Situ Reduction–Hydrolysis Synthesis and Their Superior Rate Performance as an Anode Material

A unique hybrid, TiO₂–B nanosheets/anatase nanocrystals co‐anchored on nanoporous graphene sheets, can be synthesized by a facile microwave‐induced in situ reduction–hydrolysis route. The as‐formed nanohybrid has a hierarchically porous structure, involving both mesopores of approximately 4 nm and meso‐/macropores of 30–60 nm in the graphene sheets, and a large surface area. Importantly, electrodes composed of the nanohybrid exhibit superior rate capability (160 mA h g^?1 at ca. 36 C; 154 mA h g^?1 at ca. 72 C) and excellent cyclability. The synergistic effects of conductive graphene with numerous nanopores and the pseudocapacitive effect of ultrafine TiO₂–B nanosheets and anatase nanocrystals endow the hybrid a superior rate capability.     

Reactive copolymer functionalized graphene sheet for enhanced mechanical and thermal properties of epoxy composites

Uniform dispersion of graphene nanosheets (GNS) in a polymer matrix with strong filler–matrix interfacial interaction, preserving intrinsic material properties of GNS, is the critical factor for application of GNS in polymer composites. In this work, a novel reactive copolymer VCz–GMA containing carbazole and epoxide group was designed, synthesized and employed to noncovalently functionalize GNS for preparing epoxy nanocomposites with enhanced mechanical properties. The presence of carbazole groups in VCz–GMA enables the tight absorption of copolymer on to graphene surface via π–π stacking interaction, as evidenced by Raman and fluorescence spectroscopy, whereas the epoxide segments chemically reacts with the epoxy matrix, improving the compatibility and interaction of graphene with epoxy matrix. As a result, the VCz–GMA–GNS/epoxy composite showed a remarkable enhancement in both mechanical and thermal property than either the pure epoxy or the graphene/epoxy composites. The incorporation of 0.35 wt % VCz–GMA–GNS yields a tensile strength of 55.72 MPa and elongation at break of 3.45, which are 42 and 191% higher than the value of pure epoxy, respectively. Increased glass transition temperature and thermal stability of the epoxy composites were also observed. In addition, a significant enhancement in thermal conductivity was achieved with only 1 wt % VCz–GMA–GNS loading. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2776–2785