Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Headspace solvent microextraction A new method applied to the preconcentration of 2-butoxyethanol from aqueous solutions into a single microdrop

A new procedure and experimental setup for the headspace solvent microextraction of volatile organic materials from aqueous sample solutions is described. The extraction occurs by suspending a 3-μl drop of the solvent from the tip of a microsyringe to the headspace of a stirred aqueous sample solution for a preset extraction time. The temperature of the microdrop and the bulk of sample solution should be kept constant at optimized values. The sample analyses were carried out by gas chromatography. The procedure was successfully applied to the extraction and determination of 2-butoxyethanol from content of some color samples used for painting the outer coverage of some machines such as coolers, refrigerator, cloths machine, etc. Parameters such as extraction time, nature of extraction solvent, size of microdrop, sample volume, stirring rate, ionic strength and pH of sample solution were studied and optimized, and the method performance was evaluated.     

Palladium on magnetic Irish moss: A new nano‐biocatalyst for suzuki type cross‐coupling reactions

A novel heterogeneous magnetic palladium nano‐biocatalyst was designed by utilizing Irish moss, a family of sulfated polysaccharides extracted from algae, as a natural biopolymer. This magnetic Irish moss decorated with palladium (Pd–Fe₃O₄@IM) to form a biomagnetic catalytic system was synthesized and well characterized by FT–IR analysis, X‐ray powder diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, atomic absorption spectroscopy and transmission electron microscopy. The catalyst was stable to air and moisture and displayed high catalytic activity in ligand‐free Suzuki–Miyaura cross‐coupling reactions conducted under green chemistry reaction conditions. The aromatic ketones are produced by the cross‐coupling reaction between acid chlorides and aryl boronic acid derivatives in high yields.     

Silica-Supported MnII Sites as Efficient Catalysts for Carbonyl Hydroboration,Hydrosilylation, and Transesterification

Manganese, the third most abundant transition-metal element after iron and titanium, has recently been demonstrated to be an effective homogeneous catalyst in numerous reactions. Herein, the preparation of silica-supported Mn^II sites is reported using Surface Organometallic Chemistry (SOMC), combined with tailored thermolytic molecular precursors approach based on Mn₂[OSi(OtBu)₃]₄ and Mn{N(SiMe₃)₂}₂⋅THF. These supported Mn^II sites, free of organic ligands, efficiently catalyze numerous reactions: hydroboration and hydrosilylation of ketones and aldehydes as well as the transesterification of industrially relevant substrates.     

Generation and recombination in two-dimensional bipolar transistors

We study the effects of recombination and generation process on the operation of bipolar junction transistor based on two-dimensional materials, and in particular, graphone. Here, we use Shockley–Read–Hall model to study these process. First, we investigate the current–voltage characteristics of a graphone p–n junction considering generation and recombination process. Then, we calculate the estimated changes in current gain, cutoff frequency, and output characteristics of a graphone bipolar junction transistor designed in a recent study.     

Exploring the hydroxylation-dehydrogenation connection: novel catalytic activity of castor stearoyl-ACP Delta(9) desaturase

The novel product profile obtained by incubating chiral fluorinated substrate analogues with castor stearoyl-ACP Delta(9) desaturase has been rationalized through a series of labeling studies. It was found that the introduction of the Z-double bond between C-9 and C-10 of the parent substrate occurs with pro-R enantioselectivity--a result that accounts for the observed stereochemistry of oxidation products derived from (9R)- and (9S)-9-fluorostearoyl-ACP. Oxidation of (9R)-9-fluorostearoyl-ACP occurs via at least two rapidly interchanging substrate conformations in the active site as detected by reaction pathway branching induced by deuteration at C-10 and C-11. Hydroxylation and desaturation of this substrate share the same site of initial oxidative attack.     

Ni(II), Co(II), and Cu(II) complexes incorporating 2-pyrazinecarboxylic acid：Synthesis,characterization, electrochemical evaluation,and catalytic activity for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones

Three complexes containing 2-pyrazinecarboxylate (pzca–), including [Ni(pzca)2(H2O)2], [Co(pzca)2(H2O)2], and [Cu(pzca)2(H2O)2], have been synthesized and characterized using physico-chemical and spectroscopic methods. Furthermore, the structure of each complex was determined by single-crystal X-ray diffraction. All three complexes have an octahedral geometry, where the metal ion chelated by two carboxylate oxygens, two nitrogen atoms belonging to pyrazinic acid molecules, and two oxygen atoms of two water molecules. The catalytic activities of these complex-es were also investigated in the green synthesis of 2H-indazolo[2,1-b]phthalazine-triones by the reaction of hydrazine hydrate with an arylaldehyde, phthalic anhydride, and dimedone in acetic acid.     

In situ forming PLGA implant for 90 days controlled release of leuprolide acetate for treatment of prostate cancer

In prostate cancer, hormone therapy via leuprolide acetate drug (LUP) is used to lower the level of testosterone down to castration level to effectively control the development of prostate cancer. The objective of this study was to evaluate the effective parameters in degradation and controlled release of an injectable in situ formed polymeric implant, loaded with leuprolide acetate, in order to achieve an optimum formulation for sustained drug release for 90 days with minimum burst release. The main problem associating with such implants is their high burst release. Designing an injectable implant with sustained and minimum burst release has thus become an attractive challenge in drug delivery field. Effects of type of poly(lactic‐co‐glycolic acid) 75:25 copolymers (RG752, RG756) and addition of nano‐hydroxyapatite (HA) particles on degradation rates of the implants and release profiles were examined in vitro and in vivo in a rabbit animal model. Results showed that implants containing polymers with higher molecular weights had significantly lower weight loss and molecular weight reduction. Adding nanoparticles of hydroxyapatite into poly(lactic‐co‐glycolic acid) implants caused further reduction in degradation rates, leading to a more sustained drug release in vivo, with reduced burst release. Different conventional kinetic models were applied to drug release and degradation data. The degradation data fit well to the first‐order degradation model. Higuchi model was the best kinetic release model fitted to the experimental in vitro release data. This study led to an optimum formulation (RG756:RG752 3:1 + 5% HA) with sustained leuprolide release and testosterone suppression over a 90‐day period with significant decrease of burst release phase (50%, p < 0.001) compared with the conventional Eligard formulation. The histopathology test showed that the formulated implant had no effects of toxicity or tissue necrosis in organs of the animal model. Copyright © 2017 John Wiley & Sons, Ltd.     

Novel Four-Step Synthesis of Thioxo-quinazolino[3,4-a]quinazolinone Derivatives

A novel synthesis of thioxo-quinazolino[3,4-a]quinazolinone framework was developed through a four-step reaction starting from isatoic anhydride. The resulting 2-aminobenzamides from the reaction of isatoic anhydride and different amines underwent coupling–cyclization reaction with 2-nitrobenzaldehydes, reduction of nitro group, and then cyclization reaction with carbon disulfide (CS₂). All steps were carried out under easy and user-friendly conditions in a short time without using expensive catalysts or reagents.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

A new two-step P-stable hybrid Obrechkoff method for the numerical integration of second-order IVPs

In this paper, we introduce a class of new P-stable hybrid Obrechkoff methods for the numerical solution of second-order initial value problems. We generate a two-step, symmetric, P-stable hybrid Obrechkoff method of order 8 with two off-step, symmetric, points and phase lag of order at least 2 and for special cases, this order can be increased up to 6. The numerical results obtained by the new method for some problems show its superiority in efficiency, accuracy and stability.