吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

1. 5-环辛二烯-3, 7-二炔(C~8H~4)结构和光谱性质的理论研究

采用量子化学从头算方法研究了1,5-环辛二烯-3,7-二炔(C~8H~4)的结构和光谱性质,根据等键反应分析和自然键轨道方法研究了它的稳定性、成键情况和共轭性。结果表明1,5-环辛二烯-3,7-二炔(C~8H~4)分子为平面刚性结构,可能稳定存在。分子中C≡C键与C=C键存在一定程度的共轭,可能具有芳香性。     

Thermochemistry of Lewis adducts of BH3 and nucleophilic substitution of triethylamine on NH3BH3 in tetrahydrofuran

The thermochemistry of the formation of Lewis base adducts of BH(3) in tetrahydrofuran (THF) solution and the gas phase and the kinetics of substitution on ammonia borane by triethylamine are reported. The dative bond energy of Lewis adducts were predicted using density functional theory at the B3LYP/DZVP2 and B3LYP/6-311+G** levels and correlated ab initio molecular orbital theories, including MP2, G3(MP2), and G3(MP2)B3LYP, and compared with available experimental data and accurate CCSD(T)/CBS theory results. The analysis showed that the G3 methods using either the MP2 or the B3LYP geometries reproduce the benchmark results usually to within ~1 kcal/mol. Energies calculated at the MP2/aug-cc-pVTZ level for geometries optimized at the B3LYP/DZVP2 or B3LYP/6-311+G** levels give dative bond energies 2-4 kcal/mol larger than benchmark values. The enthalpies for forming adducts in THF were determined by calorimetry and compared with the calculated energies for the gas phase reaction: THFBH(3) + L → LBH(3) + THF. The formation of NH(3)BH(3) in THF was observed to yield significantly more heat than gas phase dative bond energies predict, consistent with strong solvation of NH(3)BH(3). Substitution of NEt(3) on NH(3)BH(3) is an equilibrium process in THF solution (K ≈ 0.2 at 25 °C). The reaction obeys a reversible bimolecular kinetic rate law with the Arrhenius parameters: log A = 14.7 ± 1.1 and E(a) = 28.1 ± 1.5 kcal/mol. Simulation of the mechanism using the SM8 continuum solvation model shows the reaction most likely proceeds primarily by a classical S(N)2 mechanism.     

Theoretical studies on the S-N interactions in sulfoximine

The potential energy surface of sulfoximines has been searched using ab initio MO and Density Functional Calculations. The electronic structures of the isomers of sulfoximine have been studied using HF/6-31+G*, MP2(full)/6-31+G* and B3LYP/6-31+G* levels. Final energies of these molecules have been calculated at the high accuracy G2 and CBS-Q levels. Though a formal SN double bond is generally considered between sulfur and nitrogen in these systems, theoretical studies do not show any π interaction between them. S-N rotational barriers, bond dissociation energies, atomic charge analysis, and NBO analysis all indicate only a single bond across S-N with a very strong ionic interaction.     

The C7-C10 cycloalkanes revisited

The conformers of cycloheptane through cyclodecane have been examined at the B3LYP/6-311+G* and MP2/6-311+G* theoretical levels, with some additional calculations at the CCD/6-311+G* and CCSD(T)/6-311++G** levels. With cyclooctane, B3LYP predicts that the boat-chair and crown conformers have similar energies, whereas MP2 and CCSD(T) predict that the crown conformer is 2 kcal/mol higher in energy. The latter is in agreement with the electron diffraction data. With cyclononane, B3LYP predicts that two of the higher-energy conformers found in molecular mechanics calculations should convert to one of the lower-energy conformers. However, MP2/6-311+G* optimizations find them to be true minima on the potential energy surface. B3LYP systematically predicts larger C-C-C bond angles for these compounds than either MP2 or CCD. The results of molecular mechanics MM4 calculations are generally in good agreement with those obtained using MP2.     

Conformational study of the structure of 12-crown-4-alkali metal cation complexes

A conformational search was performed for the 12-crown-4 (12c4)-alkali metal cation complexes using two different methods, one of them is the CONFLEX method, whereby eight conformations were predicted. Computations were performed for the eight predicted conformations at the HF/6-31+G*, MP2/6-31+G*//HF/6-31+G*, B3LYP/6-31+G*, MP2/6-31+G*//B3LYP/6-31+G*, and MP2/6-31+G* levels. The calculated energies predict a C4 conformation for the 12c4-Na+, -K+, -Rb+, and -Cs+ complexes and a C(s) conformation for the 12c4-Li+ complex to be the lowest energy conformations. For most of the conformations considered, the relative energies, with respect to the C4 conformation, at the MP2/6-31+G*//B3LYP/6-31+G* are overestimated, compared to those at the MP2/6-31+G* level, the highest level of theory considerd in this report, by 0.2 kcal/mol. Larger relative energy differences are attributed to larger differences between the B3LYP and MP2 optimized geomtries. Binding enthalpies (BEs) were calculated at the above-mentioned levels for the eight conformations. The agreement between the calculated and experimental BEs is discussed.     

Ab initio study of hydrogen-bond formation between cyclic ethers and selected amino acid side chains

Binding energies for hydrogen-bonded complexes of six cyclic ethers with five hydrogen-bond donor molecules that mimic selected amino acid side chains have been calculated at the MP2/6-31G*, MP2/6-31+G*, MP2/6-311++G**(single point), and MP2/aug-cc-pvtz levels, using geometries obtained with or without counterpoise corrections throughout the geometry optimization. The calculated basis set superposition error (BSSE) amounts to 10-20% and 5-10% of the uncorrected binding energies for the neutral and ionic species, respectively, at the MP2/aug-cc-pvtz level. The authors conclude that the O...H distances in the hydrogen bonds and binding energies for the studied systems may be determined with uncertainties of up to 0.08 A and 1-2 kcal/mol, respectively, in comparison with the MP2/aug-cc-pvtz values at a reasonable computational cost by performing standard geometry optimization at the MP2/6-31+G* level. Hydrogen-bond formation energies are more negative for cyclic ethers compared to their counterparts with a C=C double bond in the ring next to the oxygen atom. The less negative hydrogen-bonding energy and the increased O...H separation have been attributed to the reduced basicity of the ether oxygen when the lone pairs can enter conjugation with the pi-electrons of the Calpha=Cbeta double bond. The present study is the first step toward the development of an affordable computational level for estimating the binding energies of natural product, fused ring ether systems to the human estrogen receptor.     

Mechanistic insights into triterpene synthesis from quantum mechanical calculations. Detection of systematic errors in B3LYP cyclization energies

Most quantum mechanical studies of triterpene synthesis have been done on small models. We calculated mPW1PW91/6-311+G(2d,p)//B3LYP/6-31G* energies for many C30H51O+ intermediates to establish the first comprehensive energy profiles for the cationic cyclization of oxidosqualene to lanosterol, lupeol, and hopen-3beta-ol. Differences among these 3 profiles were attributed to ring strain, steric effects, and proton affinity. Modest activation energy barriers and the ample exothermicity of most annulations indicated that the cationic intermediates rarely need enzymatic stabilization. The course of reaction is guided by hyperconjugation of the carbocationic 2p orbital with parallel C-C and C-H bonds. Hyperconjugation for cations with a horizontal 2p orbital (in the plane of the ABCD ring system) leads to annulation and ring expansion. If the 2p orbital becomes vertical, hyperconjugation fosters 1,2-methyl and hydride shifts. Transition states leading to rings D and E were bridged cyclopropane/carbonium ions, which allow ring expansion/annulation to bypass formation of undesirable anti-Markovnikov cations. Similar bridged species are also involved in many cation rearrangements. Our calculations revealed systematic errors in DFT cyclization energies. A spectacular example was the B3LYP/6-311+G(2d,p)//B3LYP/6-31G* prediction of endothermicity for the strongly exothermic cyclization of squalene to hopene. DFT cyclization energies for the 6-311+G(2d,p) basis set ranged from reasonable accuracy (mPW1PW91, TPSSh with 25% HF exchange) to underestimation (B3LYP, HCTH, TPSS, O3LYP) or overestimation (MP2, MPW1K, PBE1PBE). Despite minor inaccuracies, B3LYP/6-31G* geometries usually gave credible mPW1PW91 single-point energies. Nevertheless, DFT energies should be used cautiously until broadly reliable methods are established.     

Theoretical Study on Hydrogen Interaction between 5-Fluorouracil and Glycine

The geometries,electronic structure,IR spectrum and other properties of hydrogen interaction between 5-fluorouracil and glycine were studied at the B3LYP/6-31+G* level.Single point energy calculations were executed at the B3LYP/6-311++G** and B3LYP/aug-cc-pvdz levels,and natural bond orbital (NBO) analysis was carried out at the B3LYP/6-31+G* level.Finally,the hydrogen bonds were discussed via AIM electronic density topology analysis.     

胸腺嘧啶-BH3构型与性质的DFT和MP2研究

Geometries and combination energies are predicated at B3LYP / 6-31G（d）and MP2 / 6-31G（d）level for thymine-BH3 complexes and 5 geometries have been obtained. Then single point energy calculations using larger basis sets（6-311 + G（2df）and aug-cc-pVDZ）and vibrational analysis and natural bond orbital analysis are carried out on the 5 optimized conformers. The outcome indicates that the conformers with the boron atom combined with O directly are relatively stable ones,（a）and（b）,with the combination energies of 90. 4 and 88. 0 kJ / mol （B3LYP / 6-31G（d）,BSSE corrected）. The fact is that the nitrogen atom offers electron to the empty atomic orbital of boron which produces the conformers（c）and（d）. Only one conformer is found which is formed because two carbon atoms offer π electron to the empty orbital of boron. The charge transference exists in all the conformers. The combination energies have a good line relation with their charge transference. The calculated results show that when the complex forms their IR spectrum moved to the red side and the frequency shifts are relative to the stabilities of the complexes.     

Bond dissociation energies and equilibrium structures of Cu+(MeOH)x, x = 1-6, in the gas phase: competition between solvation of the metal ion and hydrogen-bonding interactions

The solvation of Cu+ by methanol (MeOH) was studied via examination of the kinetic energy dependence of the collision-induced dissociation of Cu+(MeOH)x complexes, where x = 1-6, with Xe in a guided ion beam tandem mass spectrometer. In all cases, the primary and lowest-energy dissociation channel observed is the endothermic loss of a single MeOH molecule. The primary cross section thresholds are interpreted to yield 0 and 298 K bond dissociation energies (BDEs) after accounting for the effects of multiple ion-neutral collisions, kinetic and internal energy distributions of the reactants, and lifetimes for dissociation. Density functional theory calculations at the B3LYP/6-31G* level are performed to obtain model structures, vibrational frequencies, and rotational constants for the Cu+(MeOH)x complexes and their dissociation products. The relative stabilities of various conformations and theoretical BDEs are determined from single-point energy calculations at the B3LYP/6-311+G(2d,2p) level of theory using B3LYP/6-31G*-optimized geometries. The relative stabilities of the various conformations of the Cu+(MeOH)x complexes and the trends in the sequential BDEs are explained in terms of stabilization gained from sd hybridization, hydrogen-bonding interactions, electron donor-acceptor natural bond orbital stabilizing interactions, and destabilization arising from ligand-ligand repulsion.     

Investigation of the use of B3LYP zero-point energies and geometries in the calculation of enthalpies of formation

The use of B3LYP/6–31G^* zero-point energies and geometries in the calculation of enthalpies of formation has been investigated for the enlarged G2 test set of 148 molecules [J. Chem. Phys. 106 (1997) 1063]. A scale factor of 0.96 for the B3LYP zero-point energies gives an average absolute deviation nearly the same as scaled HF/6–31G^* zero-point energies for G2, G2(MP2), and B3LYP/6–311 + G(3df,2p) enthalpies. A scale factor of 0.98, which has been recommended in some studies, increases the average absolute deviation by about 0.2 kcal/mol. Geometries from B3LYP/6–31G^* are found to do as well as MP2/6–31G^* geometries in the calculation of the enthalpies of formation.     

Theoretical studies on the conformations of selenamides

Ab initio HF/6-31+G*, MP2/6-31+G*, B3LYP/6-31+G* level calculations have been performed on HSe-NH₂ to estimate the Se-N rotational barriers and N-inversion barriers. Two conformers have been found withsyn andanti arrangement of the NH₂ hydrogens with respect to Se-H bond. The N inversion barriers in selenamide are 1.65, 2.47, 1.93 kcal/mol and the Se-N rotational barriers are 6.58, 6.56 and 6.12 kcal/mol respectively at HF/6-31+G*, MP2/6-31+G* and B3LYP/6-31+G* levels respectively. The n_N →Σ *_Se-H negative hyperconjugation is found to be responsible for the higher rotational barriers.     

2,3,7,8-四氯苯并二英分子结构与热力学性质的理论研究

用密度泛函理论(DFT)和从头算(ab initio)方法,在B3LYP/6-31G、 B3LYP/6-31G*、 B3LYP/6-311G*和MP2/6-31G*水平上全优化计算了2,3,7,8-四氯苯并二英(2,3,7,8-TCDD)的几何构型、电子结构和振动频率,并用校正后的频率计算了298～1500 K的标准热力学函数,同时用半经验的PM3 SCF-MO进行了同样的计算,计算结果与实验值及文献值较好地吻合.     

胞嘧啶-BH_3复合物构型与性质的量子化学研究

对胞嘧啶-BH3复合物分别用B3LYP/6-31G和MP2/6-31G进行理论计算以预测该复合物的构型及稳定化能, 得到了5种构型。对各构型进行了振动频率分析和自然键轨道分析。结果表明, B与N和O直接相连的构型比较稳定, 其稳定化能为137.4和120.0 kJ/mol (MP2/6-31G)。其余的构型靠π-p作用而形成, 其稳定性较前两者弱。各构型的稳定化能与电荷转移量有良好的相关性。复合物的形成, 使其红外光谱均有不同程度的红移, 幅度与复合物的稳定性相关。     

A new scheme for determining the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of glycine and alanine peptides

In this paper a new scheme was proposed to calculate the intramolecular hydrogen-bonding energies in peptides and was applied to calculate the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of the glycine and alanine peptides. The density-functional theory B3LYP6-31G(d) and B3LYP6-311G(d,p) methods and the second-order Moller-Plesset perturbation theory MP26-31G(d) method were used to calculate the optimal geometries and frequencies of glycine and alanine peptides and related structures. MP26-311++G(d,p), MP26-311++G(3df,2p), and MP2/aug-cc-pVTZ methods were then used to evaluate the single-point energies. It was found that the B3LYP6-31G(d), MP26-31G(d), and B3LYP6-311G(d,p) methods yield almost similar structural parameters for the conformers of the glycine and alanine dipeptides. MP2/aug-cc-pVTZ predicts that the intramolecular seven-membered ring N-H...O=C hydrogen-bonding strength has a value of 5.54 kcal/mol in glycine dipeptide and 5.73 and 5.19 kcal/mol in alanine dipeptides, while the steric repulsive interactions of the seven-membered ring conformers are 4.13 kcal/mol in glycine dipeptide and 6.62 and 3.71 kcal/mol in alanine dipeptides. It was also found that MP26-311++G(3df,2p) gives as accurate intramolecular N-H...O=C hydrogen-bonding energies and steric repulsive interactions as the much more costly MP2/aug-cc-pVTZ does.     

HOCl…HCOCl复合物的结构和电子性质

在DFT-B3LYP/6-311++G**水平上求得HOCl+HCOCl复合物势能面上的四种稳定构型(S1,S2,S3和S4).其中,在复合物S1和S3中,HOCl单体的5H原子作为质子供体,与HCOCl单体中作为质子受体的10原子相互作用,形成红移氢键复合物;在复合物S4中,HOCl单体的7Cl原子作为质子供体,与HCOCl单体中作为质子受体的IO原子相互作用,形成红移卤键复合物;而在复合物S2中,同时存在2C-3H…6O蓝移氢键和4Cl…5O相互作用.在MP2/6-311++G**水平上计算的单体间的相互作用能考虑了基组重叠误差(BSSE)和零点振动能(ZPVE)校正,其值在-5.05与-14.76 kJ·mol-1之间.采用自然键轨道理论(NBO)对两种单体间相互作用的本质进行了考查,并通过分子中原子理论(AIM)分析了复合物中氢键和卤键键鞍点处的电子密度拓扑性质.     

Solvation of copper ions by acetone. structures and sequential binding energies of Cu+(acetone)x,x = 1-4 from collision-induced dissociation and theoretical studies

Collision-induced dissociation of Cu+(acetone)(x), x = 1-4, with Xe is studied as a function of kinetic energy using guided ion beam mass spectrometry. In all cases, the primary and lowest energy dissociation channel observed is endothermic loss of one acetone molecule. The primary cross section thresholds are interpreted to yield 0 and 298 K bond energies after accounting for the effects of multiple ion-neutral collisions, internal energy of the complexes, and dissociation lifetimes. Density functional calculations at the B3LYP/6-31G* level of theory are used to determine the structures of these complexes and provide molecular constants necessary for the thermodynamic analysis of the experimental data. Theoretical bond dissociation energies are determined from single point calculations at the B3LYP/6-311+G(2d,2p) and MP2(full)/6-311+G(2d,2p) levels, using the B3LYP/6-31G* optimized geometries. The experimental bond energies determined here are in good agreement with previous experimental measurements made in a high-pressure mass spectrometer for the sum of the first and second bond energy (i.e., Cu+(acetone)2 --> Cu+ + 2 acetone) when these results are properly anchored. The agreement between theory and experiment is reasonable in all cases, but varies both with the size of the cluster and the level of theory employed. B3LYP does an excellent job for the x = 1 and 3 clusters, but is systematically low for the x = 2 and 4 clusters such that the overall trends in sequential binding energies are not parallel. In contrast, all MP2 values are somewhat low, but the overall trends parallel the measured values for all clusters. The trends in the measured Cu+(acetone), binding energies are explained in terms of 4s-3d sigma hybridization effects and ligand-ligand repulsion in the clusters.     

木犀草素与胞嘧啶相互作用的理论研究

采用密度泛函理论中的B3LYP方法,在6-31＋G＊基组水平上对木犀草素、胞嘧啶、木犀草素-胞嘧啶复合物进行结构优化和振动频率分析,得到了12种稳定复合物.并应用分子中的原子理论（AIM）分析、自然键轨道（NBO）理论分析得到复合物氢键性质和特征.通过基组重叠误差（BSSE）校正后的相互作用能、成键临界点电荷密度、二阶...     

A comparative study on the nature and strength of O–O, S–S, and Se–Se bond

A computational study on dichalcogenide molecules (R₂X₂; X = O, S, Se; R = H, CH₃, NH₂) has been carried out employing B3LYP and MP2 levels using 6-31+G*, 6-311+G*, 6-311++G**, and PVDZ basis sets. The relative energies have been evaluated at G2MP2 also. The rotational barriers and bond dissociation energies indicate that S–S bond is stronger than Se–Se and O–O bond. NBO analysis at MP2/6-31+G* suggest the presence of partial π character between X–X bond that decreases in the order S–S > Se–Se > O–O. Fuki functions for nucleophilic and electrophilic attack fail to distinguish the reactivity of S and Se. The proton affinities of the O₂H₂, S₂H₂, Se₂H₂ decrease in the order Se > S > O.