改性二氧化钛纳米棒的制备及其对有机污染物的光催化降解研究

为了改善纳米二氧化钛的光催化活性,通过水热法制备了氮钨共掺杂二氧化钛纳米棒。通过扫描电镜(SEM),X射线衍射(XRD),透射电镜(TEM),X射线光电子能谱(XPS)和紫外可见光吸收光谱(UV-VIS)法等对产物进行了相关表征。结果显示,与未掺杂的二氧化钛相比,氮钨共掺杂的二氧化钛纳米棒在可见光区域显示出了较强的光催化活性。因为氮钨阳离子的掺入拓宽了可见光的吸收区域。     

N掺杂TiO_2纳米管阵列的制备及可见光光催化性能研究

分别以氨水、乙二胺、丁胺为氮源,利用阳极氧化法和湿化学法合成氮掺杂的二氧化钛(TiO2)纳米管阵列.通过扫描电镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)等表征方法对氮掺杂TiO2纳米管形貌,晶型和氮元素掺杂方式进行分析,并通过可见光光催化降解六氯苯(HCB)废水,研究氮元素掺杂方式与可见光光催化活性的关系.结果表明有序排列的TiO2纳米管阵列垂直生长在钛基底表面,管长500nm左右,管径100nm左右.氮元素掺杂阻碍了TiO2晶粒的增长,抑制了锐钛矿向金红石相的转变.无机氮比有机氮更加利于氮元素进入TiO2晶格,取代态氮比间隙态氮表现出更高的可见光光催化活性.     

N掺杂纳米TiO2可见光催化氧化丙烯的动力学行为

通过在不同温度的氨气气氛中处理纳米管钛酸(NTA)制得具有可见光响应的氮掺杂纳米二氧化钛. X射线衍射(XRD)谱表征结果显示, 当温度高于400 ℃时, 样品由正交晶系向锐钛矿相转变, 700 ℃处理得到的样品除了锐钛矿相TiO2外还有TiN 新相存在; 紫外-可见扩散漫反射(DRS)结果表明, 氮掺杂纳米TiO2在整个可见光区都有明显的吸收. 不同波长可见光及不同气体流速的光催化氧化丙烯动力学研究表明, 活性最好的N掺杂纳米TiO2催化剂(600 ℃ NH3处理)对可见光的利用范围可扩展至500 nm, 低浓度丙烯光催化氧化反应为一级反应.     

Al-Y共掺杂对ZnO纳米棒形成及光催化活性的影响

以Zn(NO3)2·6H2O,Al(NO3)3·9H2O,Y(NO3)3·6H2O和Na OH为原料,采用溶液法制备了Al-Y共掺杂Zn O光催化剂(Al-Y/Zn O),并用X射线衍射(XRD)、扫描电镜(SEM)考察了Al,Y共掺杂对Zn O纳米棒形成及形貌的影响。结果表明,Al-Y共掺杂对Zn O晶粒大小基本没有影响,但会严重抑制Zn O纳米棒的生成,促使碱式硝酸锌(Zn5(OH)8(NO3)2·2H2O)的生成。以甲基橙(MO)为模型污染物考察了Al-Y共掺杂对Zn O纳米棒光催化活性的影响。结果发现,适量的Al-Y共掺杂会显著提高Zn O纳米棒的光催化活性。     

Fe、N共掺杂TiO2纳米管阵列的制备及可见光光催化活性

应用电化学阳极氧化法结合浸渍和退火后处理制备了Fe和N共掺杂的TiO2纳米管阵列光催化剂,并用场发射扫描电镜(FESEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和俄歇电子能谱(AES)仪对其进行了表征.结果表明,Fe、N共掺杂对TiO2纳米管阵列的形貌和结构没有明显影响,Fe和N均掺入了TiO2晶格.紫外-可见(UV-Vis)漫反射光谱显示Fe和N共掺杂TiO2纳米管阵列的吸收带边较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列红移,可见光吸收增强.以可见光催化降解罗丹明B(RhB)考察了材料的光催化活性,Fe和N共掺杂TiO2纳米管阵列对RhB的降解速率较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列明显提高,证明了Fe、N共掺杂产生的协同效应提高了TiO2纳米管阵列在可见光照射下的光催化活性.     

硫掺杂钛酸(盐)纳米管的表征与可见光光催化活性

以二硫化钛为钛源和硫源,通过与NaOH水热反应成功制备了硫掺杂钛酸(盐)纳米管。 采用X射线衍射、高分辨透射电子显微镜、扫描电子显微镜、扩展X射线吸收精细结构(EXAFS)和X光微区分析等手段对所制备的硫掺杂钛酸(盐)纳米管的结构、形貌、硫掺杂状态和掺杂量进行了表征,并以可见光光催化氧化乙醇反应为探针,采用原位气相色谱技术研究了硫掺杂钛酸纳米管的可见光光催化活性;结果表明,S原子以S2-形式取代了钛酸纳米管骨架中O原子的位置, 有效实现了硫掺杂;硫掺杂钛酸(盐)纳米管壁厚平均尺寸为2.9 nm,管径平均尺寸为9.7 nm。 可见光光催化氧化乙醇反应结果表明,掺硫钛酸纳米管在极低的掺硫量条件下,表现出比未掺杂的二氧化钛纳米管具有更高的可见光光催化活性。     

原位碳、氮共掺杂二氧化钛空心球的制备与可见光光催化性能

在H₂O₂-HF 的乙醇-水混合溶液中, 通过水热处理碳氮化钛(TiCN)制备了碳、氮共掺杂TiO₂ 空心球(CNTH). 用X 射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X 射线光电子能谱(XPS)和紫外-可见(UV-Vis)吸收光谱表征了所制备的样品. 在可见光(λ≥400 nm)照射下, 通过降解甲基蓝检测了碳、氮共掺杂TiO₂空心球的光催化活性. 结果表明, 源于TiCN中的部分碳和氮原子原位掺入了TiO₂的晶格中, 部分碳掺入TiO₂点阵的间隙中. 该材料在整个可见光区展示了增强的可见光吸收, 其带边明显红移. 光催化研究表明在强可见光吸收和独特的空心球结构的协同作用下, 碳、氮共掺杂TiO₂空心球展示了比P25更高的可见光光催化活性.     

铜掺氧化锌多孔纳米棒的水热合成及其光催化性能

通过两步法合成铜掺杂的氧化锌纳米棒,通过X射线衍射（XRD）、扫描电子显微镜（FESEM）、透射电子显微镜（TEM）、X射线光电子能谱（XPS）和紫外-可见（UV-Vis）分光光谱等技术对系列样品进行了表征,研究并探索了铜掺杂的氧化锌纳米棒光降解染料罗丹明B（RhB）和气体乙醛的催化活性。通过对多孔Cu掺杂ZnO纳米棒光催化分解乙醛进行了评价。多孔Cu掺杂ZnO纳米棒（CZ-5）光催化剂具有最高的催化分解乙醛的能力,比其它多孔Cu掺杂ZnO纳米棒具有很高的催化活性。多孔Cu掺杂ZnO纳米棒光催化剂在室温下在可见光（435 nm）下照射16 h,5.50×10^-4（φ,体积分数）的乙醛气体完全降解为二氧化碳（CO₂）。多孔铜掺杂的氧化锌纳米棒光催化剂的光催化性能的改善主要归因于铜和氧化锌纳米棒之间的协同作用。这种改进的光催化协同作用归因于Cu掺杂ZnO的可见光吸收的延伸和光生电子空穴对的抗重组。     

太阳光活性的铁酸铝-二氧化钛纳米复合光催化剂

以共沉淀法制备的铁酸铝和溶胶-凝胶法制备的二氧化钛粉体作为前驱体, 合成了铁酸铝-二氧化钛纳米复合材料, 通过曙红染料和甲基橙的光催化降解来评价该纳米复合材料的光催化活性, 并与单一二氧化钛的光催化性能进行了比较. 实验结果表明: 无论是紫外光还是太阳光的激发下, 铁酸铝-二氧化钛纳米复合材料的光催化活性均优于同样条件下所制备的单一二氧化钛纳米材料, 理想的铁酸铝掺杂浓度分别是1.0%(紫外光)和9.0%(太阳光). 由于在二氧化钛基体中掺入铁酸铝纳米粒子, 既可以促进光生载流子的电荷分离, 又可以使二氧化钛的光响应波长向可见光区域拓展, 提高了太阳能利用率, 从而使其在太阳光下具有更优越的光催化活性.     

氧氮共掺杂石墨烯光催化降解高浓度亚甲基蓝性能研究

本文采用原位合成法及混酸氧化法制备氧氮共掺杂石墨烯(ONG).通过透射电子显微镜分析(TEM)、X射线能谱分析(XPS)、紫外可见光漫反射(UV-vis DRS)、光致发光光谱(PL)等测试方法对所制得催化剂进行了表征,并以亚甲基蓝为目标降解物探究了材料的光催化活性及降解机理.结果表明:混酸氧化法制备的氧氮共掺杂石墨烯...     

Characterization of Visible Light Response N-F Codoped TiO2 Photocatalyst Prepared by Acid Catalyzed Hydrolysis

N-F codoped TiO₂ (TONF) photocatalysts were prepared using acid catalyzed hydrolysis method from mixed aqueous solution of TiCl₄ and NH₄F. The photocatalytic activity of the TONF was evaluated through the degradation of phenol under both visible and UV light irradiation. X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), scanning electron microscope (SEM), and N₂ adsorption isotherm were used to characterize the obtained powders. The results showed that N-F codoped TiO₂ exhibited significant improvement of visible light catalytic activity. N-F codoping could improve dispersion of TiO₂, inhibit particle size agglomeration, and retard phase transformation. Doped N could extend the light response of TiO₂ to visible light region. In addition, narrower band gap formed by F-doping was beneficial to the high visible light photocatalytic activity.     

Boron and nitrogen-codoped TiO2 nanorods: Synthesis, characterization, and photoelectrochemical properties

Boron and nitrogen codoped TiO₂ nanorods (BNTRs) were synthesized via two-step hydrothermal reactions using TiN as a starting material. The as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscope (SEM), transmission electron microscopy and X-ray photoelectron spectroscopy techniques. The results showed that TiO₂ nanorods with the diameter of approximately 50–100 nm and the length of several micrometers were doped by the interstitial N and B. The nanorods were firstly formed in the hydrothermal synthesis of nitrogen doped TiO₂. The growing process of nanorods was observed by SEM and a most probable formation mechanism of the trititanate nanorods was proposed. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent response than N–TiO₂ nanorods under visible light irradiation.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with nitrogen and cerium

Nitrogen and cerium codoped TiO₂ photocatalysts were prepared by a modified sol-gel process with doping precursors of cerium nitrate and urea, and characterized by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray photoelectron spectra (XPS) and ultraviolet-visible light diffuse reflectance spectra (UV-vis DRS). Results indicate that anatase TiO₂ is the dominant crystalline type in as-prepared samples, and CeO₂ crystallites appear as the doping ratio of Ce/Ti reaches to 3.0 at%. The TiO₂ starts to transform from amorphous phase to anatase at 987.1 K during calcination, according to the TG-DSC curves. The XPS show that three major metal ions of Ce³⁺, Ce⁴⁺, Ti⁴⁺ and one minor metal ion of Ti³⁺ coexist on the surface. The codoped TiO₂ exhibits significant absorption within the range of 400-500 nm compared to the non-doped and only nitrogen-doped TiO₂. The enhanced photocatalytic activity of the codoped TiO₂ is demonstrated through degradation of methyl orange under visible light irradiation.     

C/Nd/TiO2催化剂的制备及光催化性能研究

利用溶胶-凝胶法以钛酸四丁酯为钛源、硝酸钕为钕源、葡萄糖为碳源,制备了C和Nd单掺杂及共掺杂TiO_2催化剂。通过XRD、XPS、漫反射、SEM和物理吸附对所制备的催化剂进行表征与评价。结果表明,C和Nd共掺杂TiO_2的晶型仍为锐钛矿型,表面光滑,晶粒大小分散均匀,孔径分布在20~34 nm之间;与其他三种催化剂相比,共掺杂催化剂比表面积较大;通过掺杂C和Nd元素,形成新能带E_(C2p)和E_(Nd3+4f),降低了电子跃迁能,有利于光催化活性增强。C和Nd共掺杂TiO_2对可见光的吸收能力有明显提高,对甲基橙染料降解效果较佳,其脱色率为61.24%。     

氮-硫共掺杂二氧化钛光催化剂的制备及其可见光催化活性

采用研磨煅烧法,以硫脲(TU)作为氮源和硫源,H2TiO3(HT)为TiO2的前驱体,制备了不同TU/HT比例的N,S共掺杂TiO2光催化剂(NS/TiO2);利用X射线衍射仪、透射电镜、X射线光电子能谱仪、拉曼光谱仪、紫外-可见吸收光谱仪等分析了NS/TiO2的晶体结构、显微形貌、典型元素的化学状态以及光谱性质;利用BET法测定了NS/TiO2的比表面积,同时测定了其在可见光照下催化降解罗丹明B的活性.结果表明,当TU/HT质量比为0.5时,NS/TiO2的光催化活性最佳,光照70min时的罗丹明B降解率为44.4%.氮元素以NH3形式吸附在TiO2表面,硫元素以S6+形式存在,部分S6+取代Ti 4+的位置.与此同时N,S共掺杂使得TiO2的禁带宽度减小,可见光催化活性提高.     

A simple route for the preparation of Eu, N-codoped TiO2 nanoparticles with enhanced visible light-induced photocatalytic activity

A simple route has been developed for the synthesis of europium, nitrogen-codoped titania photocatalysts under mild conditions (i.e., low temperature, < or = 348 K, and ambient pressure). The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance spectra (DRS) analyses. The results showed that the codoped photocatalyst with a spheroidal shape exhibited a smaller size than the undoped titania. The transformation from anatase to rutile was suppressed by doping with Eu and N atoms. Furthermore, the absorbance spectra of Eu, N-codoped TiO(2) exhibited a significant red shift to the visible region. The photocatalytic activity of Eu, N-codoped TiO(2) was evaluated by photodegradation of the dye reactive brilliant red X-3B under visible light. This codoped sample exhibited enhanced photocatalytic activity compared to N-doped TiO(2), pure TiO(2), and P25.     

A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation

Sulfur and copper codoped TiO₂ nanoparticles were prepared by sol-hydrothermal process. And the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectra analysis, scanning electron microscopy, Brunauer Emmett Teller analysis, UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectra and X-ray fluorescence analysis. It was found that the S, Cu-codoped TiO₂ became amorphous with the increase of Cu content, and copper on the surface of TiO₂ existed in the oxidation state of Cu(II) while S in the form of S⁶⁺ species. And the codoped particles had higher surface area, smaller particle size, stronger spectral response in visible region compared with pure TiO₂. The effects of doping amount in a wide range, catalyst dosage, and recycle on the photocatalytic activity of the codoped catalysts were investigated with Acid Orange 7 as the model compound under visible light illumination (λ > 447 nm). The results showed that S (2.0 %), Cu (5.0 %) codoped TiO₂ had the highest visible light photocatalytic activity and good reusability performance. The kinetic study showed that this photocatalytic process coincided with the Langmuir–Hinshelwood pseudo first order reaction model.     

Ag@AgCl修饰TiO2-xCx光催化剂的制备及其可见光降解污染物性能

以钛酸丁酯和葡萄糖为原料用水热法制备了碳掺杂二氧化钛,再进一步对其进行Ag@AgCl表面修饰.用X射线衍射(XRD),X射线光电子能谱(XPS),透射电镜(TEM),BET比表面仪和紫外-可见(UV-Vis)漫反射光谱等手段对样品进行测试表征;在可见光辐射下(λ＞420 nm),以甲基橙和苯酚溶液的光催化降解实验来评价样品的活性.结果表明:经Ag@AgCl修饰后,样品的粒径增大,比表面积减小,对可见光的响应增强;可见光光催化效率有大幅度提高,对甲基橙和苯酚的降解效率分别是修饰前的5.5和3.4倍,且光催化剂经三次循环使用后活性基本保持不变.