5-[4-羟(氨)基苄基]-2-硫代-2,4-咪唑啉二酮磺酸酯(酰胺)的合成及其生物活性

以5-(4-羟基/氨基苄基)-2-硫代-2,4-咪唑啉二酮为原料,在三乙胺作傅酸剂的条件下与取代磺酰氯反应,得到28个新的5-(4-羟基/氨基苄基)-2-硫代-2,4-咪唑啉二酮苯磺酸酯/酰胺类化合物,它们的化学结构经1H NMR,MS和元素分析确证.初步生测结果表明:在100μg/mL浓度下,部分目标化合物均对供试植物病原菌和油菜显现出一定的抑制活性,如5-(4-氨基苄基)-2-硫代-2,4-咪唑啉二酮对碘苯磺酰胺(4d)对黄瓜灰霉病菌抑制率为80.7%,5-(4-羟基苄基)-2-硫代-2,4-咪唑啉二酮邻甲基苯磺酸酯(3n)和5-(4-氨基苄基)-2-硫代-2,4-咪唑啉二酮-2,4-二氯苯磺酰胺(4m)对油菜的生长抑制率分别为87.4%和81.5%.     

2-硫代-4-咪唑啉二酮的合成与表征

咪唑啉酮衍生物是一类线粒体呼吸抑制剂，对果树黑斑病及由卵菌引起的霜霉病、疫病等的活性很好。2-硫代-5-苯基亚甲基4-咪唑啉二酮衍生物不能用通法制取，其起始原料烯基氨基酸不稳定。本文用三组分串联aza-Wittig堍反应合成2-硫代-3-烷基-5-苯基亚甲基4-咪唑啉二酮类化合物。合成路线如下：     

2-烷硫基-5-苯基亚甲基-4H-咪唑啉-4-酮的合成与表征

用2-硫代-3-正丁基-5-苯基亚甲基4-咪唑啉二酮的-S-烷基化反应合成了2-烷硫基-3-正丁基-5-苯基亚甲基-4H-咪唑啉-4-酮衍生物。探讨了S-烷基化反应的反应条件和所合成化合物的波谱性质。目标产物均为新的化合物，其结构经元素分析，IR，1H NMR和MS确正。     

5-亚环己基-2-取代氨基咪唑啉酮类化合物的合成及其杀菌活性研究

以环己酮和2-硫代乙内酰脲为起始原料,经Knoevenagel缩合反应制得5-亚环己基-2-硫代咪唑啉-4-酮(1),化合物1在乙醇钠/乙醇体系中与碘甲烷反应得到5-亚环己基-2-甲硫基咪唑啉-4-酮(2),化合物2再与相应的取代苯胺或苄胺在冰醋酸体系中回流制得目标化合物5-亚环己基-2-取代氨基咪唑啉酮3a～3r,它们的化学结构经1H NMR,IR,MS和X-ray单晶衍射确证.5-亚环己基-2-对氯苄氨基咪唑啉酮(3q):Mr=335.83,C16H18ClN3O CH4O,Monoclinic,P2(1)/n,ρ=1.264 g/cm3,F(000)=712,Z=4,a=0.59895(12)nm,b=1.2161(2)nm,c=2.4289(5)nm,β=94.03(3)°.初步生物活性测定结果表明:在50μg/mL浓度下,部分目标化合物均对供试菌种显现出一定的抑制活性,其中5-亚环己基-2-对氟苄氨基咪唑啉酮(3p)对油菜菌核的EC50为24.37μg/mL,3q对辣椒疫霉的EC50为28.68μg/mL.     

1,3-二取代-2-硫代咪唑啉-4-酮的合成

1-苯甲酰基-3-芳基硫脲与氯乙酰氯反应合成了1-芳基-3-苯甲酰基-2-硫代咪唑啉-4-酮,与二氯乙酰氯反应合成了1-芳基-3-苯甲酰基-5-氯-2-硫代咪唑啉-4-酮,与三氯乙酰氯反应时仅得到了硫脲的分解重组产物苯甲酰基芳胺.产物结构经红外光谱、核磁共振谱和高分辨质谱表征.     

高效抗菌Cu2+-壳聚糖季铵盐/丙烯酸复合物的制备

以过硫酸铵为引发剂,在壳聚糖季铵盐（HACC）上接枝丙烯酸（AAc）并络合Cu²⁺,制备了具有高效抗菌性能的HACC-g-PAAc-Cu²⁺复合物.采用红外光谱（FTIR）和核磁共振波谱（¹H NMR）表征了壳聚糖季铵盐接枝改性前后的化学结构变化;利用紫外-可见吸收光谱（UV-Vis）、Cu²⁺选择电极和热失重分析（TGA）表征了壳聚糖季铵盐接枝前后负载Cu²⁺的能力;测定了HACC-Cu²⁺和HACC-g-PAAc-Cu²⁺对金黄色葡萄球菌及大肠杆菌的最小抑菌浓度,并对小鼠经口摄入毒性和兔皮肤敷涂刺激性进行了考察.研究结果表明,在壳聚糖季铵盐上负载Cu²⁺能够有效提高其抗菌性;接枝丙烯酸能提高HACC负载Cu²⁺的能力和抗菌性,Cu/HACC结构单元的摩尔比由接枝前的3：7提高到接枝后的1：1;对金黄色葡萄球菌的最小抑菌浓度由60 mg/L下降到9.2 mg/L,对大肠杆菌的最小抑菌浓度由37 mg/L下降到6.3 mg/L,无摄入毒性和皮肤刺激性.     

噻唑啉-2-硫酮衍生物的合成与生物活性

根据活性亚结构拼接原理,将3-芳基-4-氨基-5-乙氧羰基(氰基)-3H-噻唑啉-2-硫酮与酰氯反应得到目标化合物3-芳基-4-取代苯氧乙酰氨基-5-乙氧羰基(氰基)-3H-噻唑啉-2-硫酮.再以3-苯基-4-氨基-5-乙氧羰基-3H-噻唑啉-2-硫酮为合成原料,经过Aza-Wittig反应得到目标化合物5-芳氧基-3,6-二芳基-2-硫代噻唑并[4,5-d]嘧啶-7-酮.通过IR,1H NMR,EI-MS,元素分析等方法对所合成的化合物进行了结构表征.代表化合物5-对氯苯氧基-3,6-二苯基-2-硫代-2,3-二氢噻唑并[4,5-d]嘧啶-7(6H)-酮(C1)经单晶X衍射证实了结构.除草活性测试结果表明:部分噻唑啉-2-酮类衍生物对稗草和油菜都表现出了较好的抑制活性.     

1-苯甲酰基-1-甲硫基甲醇与硫脲和芳胺的反应研究

1-苯甲酰基-1-甲硫基甲醇(2)与硫脲(3a)和芳基取代硫脲(3b-3i)在弱酸性条件下回流反应1h,得到5-苯基咪唑啉-2-硫酮-4-酮(4a)和1-芳基-5-苯基咪唑啉-2-硫酮-4-酮(4b-4i),产率72%～89%.而化合物2与芳胺(5a-5f)在弱碱性条件下回流反应3h,则得到2-芳胺基-2-甲硫基苯乙酮(6a-6f),产率为64%～88%.     

2-氨基-4H-咪唑啉-4-酮衍生物的快速平行合成法

咪唑啉酮衍生物是一类具有良好生物活性和药理活性的杂环化合物 [1,2 ] ,尤其是一些 2 -氨基咪唑啉酮表现出良好的杀菌、抗炎及抗癌活性 [3 ,4 ] .从自然界如一些海洋生物中可分离得到含 2 -氨基咪唑啉酮结构的生物碱 [5,6] .最近 ,组合化学方法广泛地应用于有机合成 ,它包括固相合成法和液相合成法[7～ 9] .我们曾应用氮杂 Wittig反应制得 2 -氨基取代咪唑啉酮衍生物 ,部分化合物表现出一定的抑菌活性 [10 ,11] .本文进一步报道应用液相平行反应法快速合成 2 -氨基 - 4H-咪唑啉 - 4-酮衍生物 (4) .该方法应用烯基膦亚胺 1与苯基异氰酸酯的…     

新型含咪唑啉2,4-二酮的(硫代)磷酸酯类化合物的合成和生物活性测定

以对羟基苯基和对羟基苄基咪唑啉2,4-二酮羧酸酯类化合物为二次先导结构,根据Hydantocidin在植物体内的作用形式是Hydantocidin 5’-Phosphate的特点,将3种对羟基苯(苄基)-2,4-咪唑啉二酮中间体与(硫代)磷酰氯反应合成得到了38个结构新颖的含有2,4-咪唑啉二酮的(硫代)磷酸酯类化合物,其结构通过IR,1H NMR,31P NMR和元素分析表征.初步生物测定结果表明O-乙基-O-苯基-5-(4-羟基苯基)-2,4-咪唑啉二酮硫代磷酸酯(B14)和O,O-二苯基-5-(4-羟基苄基)-2-硫代-4-咪唑啉二酮硫代磷酸酯(B25)在100μg/mL浓度下对油菜的抑制率为53.1%和62.7%,化合物O,O-二(邻甲氧基苯基)-5-(4-羟基苯基)-2,4-咪唑啉二酮硫代磷酸酯(B7),B14和O,O-二(对甲基苯基)-5-(4-羟基苄基)-2,4-咪唑啉二酮硫代磷酸酯(B17)对蚜虫表现了一定的杀虫活性,在300μg/mL浓度下24 h的校正死亡率分别为52%,51%和69%.     

Preparation, spectral and biological investigation of formaldehyde-based ligand containing piperazine moiety and its various polymer metal complexes

A novel tetradentate salicylic acid-formaldehyde ligand containing piperazine moiety (SFP) was synthesized by condensation of salicylic acid, formaldehyde and piperazine in presence of base catalyst, which was subjected for the preparation of coordination polymers with metal ions like manganese(II), cobalt(II), copper(II), nickel(II) and zinc(II). All the synthesized polymeric compounds were characterized by elemental analysis, IR, (1)H NMR and electronic spectral studies. The thermal stability was determined by thermogravimetric analysis and thermal data revealed that all the polymer metal complexes show good thermal stability than their parent ligand. Electronic spectral data and magnetic moment values revealed that polymer metal complexes of Mn(II), Co(II) and Ni(II) show an octahedral geometry while Cu(II) and Zn(II) show distorted octahedral and tetrahedral geometry respectively. The antimicrobial screening of the ligand and coordination polymers was done by using Agar well diffusion method against various bacteria and fungi. It was evident from the data that antibacterial and antifungal activity increased on chelation and all the polymer metal complexes show excellent antimicrobial activity than their parent ligand.     

Optimization of Co2+ ions removal from water solutions via polymer enhanced ultrafiltration with application of PVA and sulfonated PVA as complexing agents

The paper presents the results of the studies of UF-complexation process applied for the removal of Co(2+) ions from water solutions. As binding agents for cobalt ions, the PVA polymer (M(w)=10,000) and its sulfonated form, synthesized in the laboratory, have been used. The method of experimental design and response surface methodology have been employed to find out the optimal conditions for the complexation process and to evaluate the interaction between the input variables, i.e., initial cobalt concentration, pH and amount of the polymer used, expressed as a polymer/Co(2+) ratio r. The data collected by the designed experiments showed that sulfonation of polymer has improved significantly the binding ability of PVA. The optimal conditions of cobalt ions complexation established by response surface model for non-sulfonated PVA polymer have been found to be as follows: the initial concentration of Co(2+)=5.70 mg L(-1), the ratio between polymer and metal ions, r=8.58 and pH=5.93. The removal efficiency of Co(2+) in these conditions was 31.81%. For sulfonated PVA polymer, the optimal conditions determined are as follows: initial concentration of [Co(2+)](0)=10 mg L(-1), r=1.2 and pH=6.5. For these conditions, a removal efficiency of 99.98% has been determined. The experiments showed that Co(2+) removal ability of sulfonated PVA was much higher than its non-sulfonated precursor. Although the polymer concentrations used in the tests with sulfonated PVA were approximately ten times lower than the non-sulfonated one, the removal efficiency of cobalt ions was significantly higher.     

Synthesis,characterization, metal sorption,and biological activities of organosoluble and thermally stable azoxanthone‐based polyester

The aim of this work was to develop functionalized polyxanthones, poly(azoxanthone‐ester)s (PAXEs), with biological activities and heavy metal sorption abilities. For this purpose, at first, new xanthone‐based diol moiety was synthesized and then used for polymerization with commercial dicarboxylic acids via polycondensation reaction by Vilsmeier adducts. The monomer and all polymers were characterized by Fourier transform infrared (FTIR) and Nuclear magnetic resonance (NMR) spectroscopies, and the physical properties of these PAXEs including solution viscosity, solubility properties, thermal stability, and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents. In addition, evaluation of antioxidant activity of the PAXEs by 2,2‐diphenyl‐1‐picrylhydrazyl assay revealed that synthesized polymers have higher antioxidant activity than xanthone nucleus. Also, evaluation of the antibacterial activities of the diol monomer and polymer showed good antibacterial activity against some bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Pseudomonas aeruginosa). The results showed that these PAXEs can be used in pharmaceutical and food industry (food packaging). Furthermore, these functionalized polyesters were utilized for extraction of environmentally harmful metal cations such as Cr (VI), Co (II), Ni (II), Cu (II), Pb (II), and Cd (II) from aqueous solutions. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of metal-incorporated aniline formaldehyde resin modified by amino acid for antimicrobial applications

Advances in metal incorporated resins are now an active field of research. To develop resin having better antimicrobial and thermal activity, a series of metal-chelated resins have been synthesized by the condensation of (4-aminobenzene-1,3-diyl)dimethanol with 2,6-diaminohexanoic acid in alkaline medium and then this polymeric ligand further reacts with transition metal ions forming various coordination polymers. (4-Aminobenzene-1,3-diyl)dimethanol was initially prepared by the reaction of aniline and formaldehyde in 1?:?2 molar ratio in alkaline medium. The analytical data reveal that the polymer metal complexes of Mn(II), Co(II), and Ni(II) are coordinated with two water molecules, which are further supported by FTIR spectra and TGA data. Comparative analyses of the polymer metal complexes in thermal curves show better thermal stability than the polymeric ligand. Since these resins are relatively stable at high temperatures, they can be used for medical and biomaterial applications requiring thermal sterilization, solvent-resist coating materials because of their insoluble nature, and antifouling coating materials owing to antimicrobial activity in ?elds such as life-saving medical devices and the bottoms of ships.     

Coordination Assembly of Tetrahedral Ti4(embonate)6 Cages with Alkaline-Earth Metal Ions

Recently,the tetrahedral Ti₄L₆ cage(L=embonate)has been applied as the starting material to realize coordination assembly with transition and rare-earth ornoble metal ions through a two-step reaction.In this work,by employing the Ti₄L₆ cages to assemble with alkaline-earth metal ions(such as Mg²⁺,Ca²⁺and Ba²⁺)under different solvothermal conditions,a series of Ti₄L₆-based structures from simple cages to 1D chain,2D layer and 3D framework have been synthesized and structurally characterized.In addition,thermal stability,phase purity,UV-vis absorption spectrum,the fluorescent and third-order nonlinear-optical properties are also investigated.     

Poly(4‐vinylpyridine) as the host ligand of metal‐containing chromophores for second‐order nonlinear optical active materials

Two formulas of grafted polymers with metal‐containing chromophores, potentially suitable for second‐order nonlinear optics applications, are described. Two chromophores were obtained from a tridentate ligand coordinated to Cu(II) or Pd(II) ions. The organometallic chromophore fragments were grafted to poly(4‐vinylpyridine) by the pyridinic nitrogen of the host polymer. Some qualities displayed by the new metallated polymers are remarkable: (1) a high value of the first hyperpolarizability coefficient of the chromophores, (2) a high content of the grafted chromophore in the polymers (up to 60 wt %), (3) a considerable increase in the glass‐transition temperatures (up to 240 °C), (4) good thermal stability in air (ca. 280 °C), and (5) good optical transparency of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2987–2993, 2002     

Spectroscopic investigations into degradation of polymer membranes for fuel cells applications

The research was focused on synthesis of proton conductive, easily degradable polymer membranes, which can be used as a model system to verify the efficiency of transition metal ions (TMI) in prevention of polymer degradation. Two polymers composed of 2-hydroxyethyl methacrylate (HEMA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS), and styrenesulfonic acid (SS) were synthesized. The copolymers were characterized by gel permeation chromatography (GPC), elementary analysis, and FTIR and fluorescence spectroscopies. The results allowed determination of weight-average molecular weight and the copolymer composition. The protons of sulfonic groups were substituted by paramagnetic transition metal ions of various spin states (Cr(3+), S=3/2 and Mn(2+), S=5/2) with the loading varying from 0.5 up to 10 mol%. The effectiveness of spin catalysis was checked by EPR. The results obtained indicate enhancement of polymer stability in the presence of Mn(2+).     

Synthesis,spectral, and antibacterial screening studies of chelating polymers of bisphenol-A–formaldehyde resin bearing barbituric acid

A new polymeric ligand was synthesized by the reaction of bisphenol-A and formaldehyde in the basic medium, followed by condensation polymerization with barbituric acid in the acidic medium. Polymer metal complexes were prepared by reaction of this resin with Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The polymeric resin and its metal polychelates were characterized by elemental analysis, FT-IR, ¹³C-NMR, and ¹H-NMR spectra. The geometry of the polymer metal complexes was evaluated by electronic spectra (UV-Vis) and magnetic moment measurement. Thermal stabilities show an increased thermal stability of the metal polychelates compared to the ligand. The antibacterial activities of all the synthesized polymers were investigated against Bacillus subtilis, Staphylococcus aureus, and Escherichia coli, showing good antibacterial activities against these bacteria. Cu(II) polychelate showed highest biocidal activity.     

Meta‐linked and para‐linked water‐soluble poly(arylene ethynylene)s with amino acid side chains: Effects of different linkage on Hg2+ ion sensing properties in aqueous media

Water‐soluble, meta‐ and para‐linked poly(arylene ethynylene)s containing L ‐aspartic acid‐functionalized fluorene units (P1 and P2) and their model compounds (M1 and M2) have been synthesized, and their photophysical properties and fluorescent sensing properties were investigated in aqueous solution. P1 and M1 with the meta‐linkage show blue‐shifted absorption and emission spectra, and decreased photoluminescence quantum yields compared with those of P2 and M2 with para‐linkage. Their absorption and fluorescence spectra are pH dependent perhaps due to the aggregation of the polymer chains at low pH values. In buffer solutions, both polymers and their model compounds exhibit the excellent selectivity and sensitivity to Hg²⁺ over other common metal ions. Furthermore, the quenching constant and detection limit of P1 are determined to be 1.04 × 10⁷ M^?1 and 10 nM, and show the higher sensitivity compared to P2. Further comparison of their model compounds reveal that the sensitivity and quenching efficiency of M1 is also higher than that of M2, indicating that the meta‐linkage pattern plays a key role in improving their Hg²⁺ ion sensing properties. In addition, both meta‐ and para‐linked polymers exhibit the higher quenching efficiency than their model compounds due to the amplified fluorescence response of conjugated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal ion extraction using newly-synthesized bipyridine derivative as a chelating reagent in supercritical CO(2).

4,4'-Bis(dihexylaminocarbonyl)-2,2'-bipyridine (BDC-Bipy) was synthesized and studied systematically as a chelating reagent for metal ions extraction in supercritical CO(2). The compound showed high extraction efficiency for Co(2+) (100%), Cu(2+) (100%), Cd(2+) (98.2%), and Zn(2+) (100%) ions and good extraction efficiency for Sr(2+) (79.4%) and Pb(2+) (89.8%) when the extraction was performed in supercritical CO(2) at 313 K and 25 MPa with the system of BDC-Bipy, deionized water and perfluoro-1-octanesulfonic acid tetraethylammonium salt. The recoveries of mixed metal ions were also measured; unfortunately, the system of extraction has no selectivity for the metal ions.