分光光度法同时测定多元素的研究(Ⅱ)——以CPA-矩阵法计算混合体系中微量锆和铪

本文将m-NPF+CTMAB体系用于锆、铪混合物中微量锆、铪的同时测定。确定了同时测定锆,铪的最佳实验条件。通过使用CPA-矩阵法计算解决了混合体系中锆、铪分量的测定;对光度分析中应用CPA-矩阵法的关键——选择适宜的测定波长问题作了进一步讨论,提出了“相关波长”和“相关组份”的概念。     

卡尔曼滤波-示差脉冲极谱法同时测定铅(Ⅱ)、铊(Ⅰ)、铟(Ⅲ)和镉(Ⅱ)的研究

以Pb(Ⅱ)、T1(Ⅰ)、In(Ⅲ)和Cd(Ⅱ)单个离子的△i_P-C斜率建立测量转换矩阵后,对四种离子的两组份、三组份和四组份混合离子的示差脉冲极谱波作卡尔曼(Kalman)滤波。所拟合的各离子峰高与其浓度呈良好的线性相关,再现性和回收率分别为2％和94～104％。讨论了影响滤波的因素。本法精确、快速,适宜联机处理极谱数据。     

白酒芳香组份与质量的相关性研究

本文首次采用ＦＦＡＰ交联毛细管柱对兼型白酒的微量香味组份进行了测定，用ＧＣ－ＭＳ结合标样核对确定了五十多种组份。用Ｒ型聚类分析、多元线性回归分析。研究了白酒中微量香味组份与质量等级间的相关性。     

痕量组份分析中一个误差控制问题

本文介绍了在测定矿石和矿物这种物料中的痕量组份时,由于痕量组份通常存在于离析的异质矿粒中,由取样量的不同所产生的误差,并提出了利用取样常数控制这种误差的方法。首先对被分析物料实验测定取样标准偏差,或进行一些有关的化学测试和物理测试,以确定取样常数。然后根据取样常数即可确定对于一预定标准偏差的最小取样量。     

分光光度法同时测定多元素的研究 : 以CPA-矩阵法计算混合体系中Mo、W、Ti三元素的含量

本文将CPA-矩阵法用于光度分析中同时对多元素的测定, 确定了在SAF为显色剂、DTMAB为胶束增敏剂的配合体系中以CPA-矩阵法计算Mo、W、Ti三元素含量的各种最佳实验条件, 建立了在该体系中同时测定互相干扰的Mo、W、Ti三元素的分光光度法. 总结了进行多组份测定时选择分析波长的四项原则, 并依此确定了6个测定波长: 510、512、514、516、518、520nm为Mo、W、Ti三元素的测定波长. 依本文建立的方法, 通过对任意含量配比的三元素混合试样进行测定结果极为满意, 方法具有稳定、准确、简便、快速和经济等特点, 便于推广应用.     

轻稀土元素La、Pr、Nd、Sm的同时光度法测定

本文提出以各因素同时改进的因素轮换法来处理多组份混合物溶液的吸收光谱,方法能对任一组份加以任意的约束,因而适用于“病态体系”。用两种显色体系的数据联合解矛盾方程,进行La、Pr、Nd、Sm四组份的同时测定,计算得到满意的结果。     

一阶导数光谱K系数法同时测定硝基酚钠三组分

研究和建立了同时测定硝基酚钠混合三组份的新方法——一阶导数光谱K系数法。确定了最佳实验条件和测定波长,方法简便、快速、准确。通过对动植物细胞赋活增进剂中邻硝基酚钠、对硝基酚钠、5-硝基愈创木酚钠三组份的直接测定,其相对误差小于2%,相对标准偏差小于3%,回收率为99～103%。     

激光诱导荧光光谱分析法研究 Ⅳ.钐-三氟乙酰丙酮-三正辛基膦化氧-浓乳-100的荧光特性研究及应用

采用激光诱导荧光光谱测定装置研究了Sm-三氟乙酰丙酮(TFA)-三正辛基膦化氧(TOPO)体系的激光诱导发光特性和发光机理。根据配合物体系中各组份的光谱特性和光谱能级,提出Sm-TFA-TOPO体系的能量传递机制。拟定了在农乳-100存在下,TFA-TOPO体系测定痕量钐的激光诱导荧光光谱分析新方法。不经分离,用于氧化钇和合成水样中痕量钐的测定,操作简便、快速,结果令人满意     

INERTEAR毛细管在芳香烃碳六组份分析上的应用

苯在常压非等温平衡等离子体(DBD)加氢反应过程中,主要生成环己烯,环己二烯和环己烷.要优化加氢反应条件,首先要解决分析问题.本文提出了用INERTEAR毛细管柱分析测定了芳香烃碳六组份含量的分析方法,研究了其测定条件,并确定了各组份的定量校正因子.为常压下研究微型等离子体反应器中进行芳香烃苯加氢的反应奠定了基础.     

ICP-AES法测定焊锡中铜铁铝锌

本文以ICP-AES法测定焊锡中铜、铁、铝、锌。提出了不用分离锡、铅,直接测定前三个元素的可行性;及分离锡、铅后,四元素同时测定的可行性;并对测定条件、测定方法和分离锡铅的步骤进行了研究。方法比较简便,能满足焊锡样品测定的要求。     

Metal-Directed Formation of Tetra-, Hexa-, Octa-, and Nonanuclear Complexes of Magnesium,Calcium, Manganese,Copper, and Cadmium

Efficacious metal control of self-assembly of dialkylketipinate dianions leads to completely different supramolecular assemblies. The structures of grid 1 , double-decker 2 , triple-decker 3 , and metalla-spherand 4 were characterized by X-ray crystallographic analyses or by NMR spectroscopy.     

Optimization of parameters for semiempirical methods. III Extension of PM3 to Be,Mg, Zn,Ga, Ge,As, Se,Cd, In,Sn, Sb,Te, Hg,Tl, Pb,and Bi

Using a recently developed procedure for optimizing parameters for semiempirical methods,¹ PM3 has been extended to a total of 28 elements. Average ΔH_f errors for the newly parameterized elements are Be: 8.6, Mg: 8.4, Zn: 5.8, Ga: 14.9, Ge: 11.4, As: 8.5, Se: 11.1, Cd: 2.6, In: 11.3, Sn: 9.0, Sb: 13.7, Te: 11.3, Hg: 6.8, Tl: 6.5, Pb: 7.4, and Bi: 10.9 kcal/mol. For some elements the paucity of data has resulted in a method, which, while highly accurate, is likely to be only poorly predictive.     

Prediction of the enthalpy of vapourisation for anhydrides,formates, acetates,propionates, butyrates,esters, and ethers

Four analytical correlations based on the use of the corresponding states principle were used to calculate the enthalpy of vapourisation of fluids. Three of these correlations require as inputs the critical temperature and the acentric factor. The fourth requires a molecular Lennard–Jones parameter and the acentric factor. Results for 184 polar and non-polar fluids grouped into 9 families are compared with the values accepted by the Design Institute for Physical Property (DIPPR) project. Recommendations are given for the use of each model and for the choice of the adequate model for each family of fluids.     

ICP-AES法测定铝中铁、硅、铜、镓、镁、锌、锰和钛

用 50g L氢氧化钠溶液溶解铝样品 ,硝酸 (1 1 )酸化 ,以ICP AES测定其中铁、硅、铜、镓、镁、锌、锰和钛等 8种杂质元素。     

ICP-MS测定化妆品中铍、镉、铊、铬、砷、碲、钕、铅

目的：建立化妆品中铍、镉、铊、铬、砷、碲、钕、铅8种有害元素的测定方法。方法：采用电感耦合等离子体质谱法,样品采用微波消解,以钇、锂、铟、铋为内标作定量分析。结果：各元素和内标元素在一定浓度范围内的质量数比值均与浓度呈良好的线性关系,线性方程的相关系数均大于0.9998,平均回收率为95%~104%,相对标准偏差(RSD)均小于3%。结论：该方法灵敏度高,准确,可为化妆品中上述元素的限量检查提供参考。     

Thin-layer chromatographic separation of aldrin,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,pentachlorophenol, and of chlordane,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,and pentachlorophenol from each other

A thin-layer chromatographic method is reported for the separation of aldrin (or chlordane), dieldrin, γ-hexachlorocyclohexane, malathion, ethyl-parathion, and pentachlorophenol from each other. The procedure, however, does not separate aldrin and chlordane from each other although it does separate either pesticide from the other components. The method employs alumina plates with n-hexane:xylene:benzene:toluene:cyclohexane:methyl cyclohexane (50:50:50:50:50:50:) as developing solvent.     

猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

Enthalpies of dilution of aqueous solutions of formamide,acetamide, propionamide,andN,N-dimethylformamide

The enthalpies of dilution of aqueous solutions of formamide, acetamide, propionamide,N,N-dimethylformamide, and sucrose have been measured from about 0.15 to 2.0 moles-kg ^–1 at 25.0°C. The results of the enthalpy measurements were used to calculate the pairwise enthalpies of interaction for each compound with itself. The equation of Savage and Wood together with their interaction parameters are used to predict the experimental results. All of the predictions are within the standard deviation of the original correlation of Savage and Wood (±220 J-kg-mole ^–2 ). Detailed examination of the results shows that specific effects are present but they are less than 220 J-kg-mole ^–2 . Results on urea and substituted ureas are used to determine interaction coefficients for a urea group with itself and with another CH ₂ group. The result,H _U,U =–280 andH _{U,CH 2} =29 J-kg-mole ^–2 , is an improvement on the previous arbitrary assignment of parameters for urea interactions.