In-Situ Electrodeposition of Rhodium nanoparticles Anchored on Reduced Graphene Oxide nanosheets as an Efficient Oxygen Reduction Electrocatalyst

A simple, versatile, and cost-effective one-pot electrochemical deposition is used to fabricate rhodium (Rh) nanoparticles decorated surface of reduced graphene oxide (rGO) functionalized glassy carbon electrode (GCE) for oxygen reduction reaction (ORR) in alkaline media. The chemical and physical structure of the sample is probed via transmission electron microscopy, rotating disk electrode (RDE), X-ray photoelectron spectroscopy, linear sweep voltammetry, and Raman spectroscopy. The synergistic effects between the unique properties of Rh nanoparticles and rGO creates such innovative hybrid that exhibits a catalytic activity comparable to that of the commercial platinum electrocatalyst (Pt/C). As a result, the as-electrodeposited Rh@rGO hybrid exhibits outstanding ORR activity in alkaline media, as evidenced by a larger diffusion-limited current, greater positive onset potential, much better stability and methanol tolerance than Pt/C under the same conditions.     

Fabrication of graphene-supported tetraferrocenylporphyrin electrocatalyst for oxygen reduction and its unique electrochemical response in both alkaline and acid media

A novel high-performance non-noble metal electrocatalyst for the oxygen reduction reaction (ORR) was fabricated by anchoring cobalt tetraferrocenylporphyrin (CoFcP) onto poly(sodium-p-styrenesulfonate) modified graphene (PSS-Gr) through solvothermally assisted π–π assembling method. The morphology of the assembled composite was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The interactions between CoFcP moieties and graphene sheets were confirmed by UV–Vis absorption spectroscopy and X-ray photoelectron spectroscopy. The electrocatalytic properties of the CoFcP/PSS-Gr catalyst towards the oxygen reduction reaction were assessed using rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) measurements in both alkaline and acidic media. In addition, cyclic voltammetry and chronoamperometric measurements were utilized to evaluate the catalytic activity and stability of the CoFcP/PSS-Gr composite in alkaline solution. The results showed that CoFcP supported on graphene exhibited an outstanding electrocatalytic performance towards the ORR comparable with commercial Pt/C catalyst in alkaline media, such as high onset potential (0.889 V vs. reversible hydrogen electrode, RHE), half wave potential (0.789 V vs. RHE), better tolerance to methanol, excellent stability (84.1 %, retention after 10000 s), and efficient four-electron pathway. Moreover, the proposed hybrid presented excellent catalytic activity in terms of onset potential (0.72 V vs. RHE) and high-electron transfer number compared with Pt/C in acidic media.     

Electro-deposition of platinum nanoparticles on 4-mercaptobenzene-functionalized multi-walled carbon nanotubes

A new method to electro-deposit platinum nanoparticles on the surface of multi-walled carbon nanotubes (MWNTs) functionalized with 4-mercaptobenzene has been described. X-ray photoelectron spectroscopy results reveal that 4-mercaptobenzene was attached to the surface of MWNTs. Transmission electron microscope and X-ray diffraction analysis confirm that platinum nanoparticles were highly dispersed on the surface of MWNTs, and the average size of the platinum particle is 4.2 nm. The electrocatalytic properties of the Pt/MWNT composite electrode for methanol oxidation were investigated by cyclic voltammetry, and the results show that the fabricated composites exhibit high catalytic activity and good long-term stability. The study provides a feasible approach to fabricate Pt/MWNT composite electrode for direct methanol fuel cell.     

Electrochemical Catalytic Properties of Pt/FeSnO(OH)_5 towards Methanol Oxidation

The Pt/FeSnO(OH)_5 catalyst has been prepared by depositing Pt nanoparticles on the synthesized FeSnO(OH)_5 nanoboxes and demonstrates excellent performance towards methanol oxidation reaction(MOR) in direct methanol fuel cells(DMFCs).The Pt/FeSnO(OH)_5 catalyst exhibits a higher mass activity(1182.35 mA/mgPt) compared with Pt/C(594.57 mA/mgPt) catalysts.The X-ray powder diffraction,field emission scanning electron microscope,field emission transmission electron microscopy,X-ray photoelectron spectroscopy and electrochemical experiments have been employed to explore the relationships between the crystal structure and electrochemical properties.The increased activity and resistance of CO poisoning for Pt/FeSnO(OH)_5 catalyst can be attributed to the strong interaction between the transition metal in the hydroxide and Pt and the bifunctional effect.The higher relative concentration of Pt~0 in Pt/FeSnO(OH)_5 also contributes to the MOR activity.Moreover,the charge transfer resistance of Pt/FeSnO(OH)_5 is lower than that of Pt/C.Therefore,Pt/FeSnO(OH)_5 has great application prospect as a high-performance electrocatalyst in DMFCs.     

One-step synthesis of Pt nanoparticles/reduced graphene oxide composite with enhanced electrochemical catalytic activity

A one-step electrochemical approach for synthesis of Pt nanoparticles/reduced graphene oxide(Pt/RGO) was demonstrated.Graphene oxide(GO) and chloroplatinic acid were reduced to RGO and Pt nanoparticles(Pt NPs) simultaneously,and Pt/RGO composite was deposited on the fluorine doped SnO 2 glass during the electrochemical reduction.The Pt/RGO composite was characterized by field emission-scanning electron microscopy,Raman spectroscopy and X-ray photoelectron spectroscopy,which confirmed the reduction of GO and chloroplatinic acid and the formation of Pt/RGO composite.In comparison with Pt NPs and RGO electrodes obtained by the same method,results of cyclic voltammetry and electrochemical impedance spectroscopy measurements showed that the composite electrode had higher catalytic activity and charge transfer rate.In addition,the composite electrode had proved to have better performance in DSSCs than the Pt NPs electrode,which showed the potential application in energy conversion.     

High dispersion and electrocatalytic properties of platinum nanoparticles on graphitic carbon nanofibers (GCNFs)

Highly dispersed platinum nanoparticles were electrodeposited on graphitic carbon nanofibers (GCNFs) by cyclic voltammetry (CV) in 7.7 mM H2PtCl6+0.5 M HCl aqueous solutions. The graphitic carbon nanofibers (GCNFs) used in this paper were grown directly on a graphite disk by chemical vapor deposition (CVD). The micrographs and element composition of Pt/GCNFs/graphite electrode were characterized by scanning electron microscopy (SEM) and electron diffraction spectroscopy (EDS). The electrocatalytic properties of Pt/GCNFs/graphite electrode for methanol oxidation have been investigated by CV and excellent electrocatalytic activity can be observed even at very low platinum loading (md=8.79 microg cm(-2)). The highest mass activity (MA) for methanol oxidation reaches 323 Ag(-1) when Pt/GCNFs/graphite electrode was cycled at a sweep rate of 50 mVs(-1) by CV in 2 M CH3OH+1 M H2SO4 aqueous solutions. This may be attributed to the small particle size and high dispersion of platinum particles coated on GCNFs and shows good potential application in direct methanol fuel cell (DMFC). Additionally, the long-term cycling stability of platinum catalysts was also investigated.     

Electrocatalytic oxidation of methanol on Pt/NiZn electrode in alkaline medium

In this study, a platinum electrode was coated with NiZn layer (Pt/NiZn) in a nickel-zinc bath by electrodeposition for use as anode material for methanol electrooxidation in alkaline solution. The electrode prepared was etched in a concentrated alkaline solution (30% NaOH) to produce a porous and electrocatalytic surface suitable for use in the methanol electrooxidation (Pt/NiZn). The surface morphologies and compositions of coating before and after alkaline leaching were determined by energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques. The effect of NiZn coated platinum electrode for methanol electrooxidation was investigated in 1 M NaOH solution by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Methanol electrooxidation on Pt/NiZn electrode was studied at various temperatures and potential scan rates. The results showed that Pt/NiZn electrode behaved as an efficient catalyst for the electrooxidation of methanol in alkaline medium.     

CoPt nanoparticles and their catalytic properties in electrooxidation of CO and CH(3)OH studied by in situ FTIRS

CoPt nanoparticles supported on a glassy carbon electrode (denoted as CoPt/GC) were prepared by galvanic replacement reaction between electrodeposited Co nanoparticles and K(2)PtCl(6) solution. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were both employed to characterize the CoPt nanoparticles. It was shown that the CoPt nanoparticles have irregular shapes and most of them exhibit a core-shell structure with a porous Co core and a shell of Pt tiny particles. The composition of the CoPt nanoparticles was analyzed by energy-dispersive X-ray spectroscopy (EDX), which depicts a Co : Pt ratio of ca. 21 : 79. Studies of cyclic voltammetry (CV) demonstrated that CoPt/GC possesses a much higher catalytic activity towards CO and methanol electrooxidation than a nanoscale Pt thin film electrode. In situ FTIR spectroscopic studies have revealed for the first time, that a CoPt nanoparticles electrode exhibits abnormal IR effects (AIREs) for IR absorption of CO adsorbed on it. In comparison with the IR features of CO adsorbed on a bulk Pt electrode, the direction of the IR bands of CO adsorbed on the CoPt/GC electrode is inverted completely, and the intensity of the IR bands has been enhanced up to 15.4 times. The AIREs is significant in detecting the adsorbed intermediate species involved in electrocatalytic reactions. The results demonstrated a reaction mechanism of CH(3)OH oxidation on CoPt/GC in alkaline solutions through evidencing CO(L), CO(M), HCOO(-), CO(3)(2-), HCO(3)(-) and CO(2) as intermediate and product species by in situ FTIRS.     

石墨烯量子点负载银纳米粒子制备及氧还原电催化活性

银基氧还原电催化剂具有较高的电催化活性且价格相对低廉,因而受到广泛关注. 本文采用简单、预先合成的石墨烯量子点作为载体和还原剂,制得了负载于石墨烯量子点、且无保护剂和表面活性剂的表面洁净银纳米粒子（Ag NPs/GQDs）. 电化学研究表明,Ag NPs/GQDs复合电催化剂的氧还原有较高的电催化活性,氧在碱性溶液中可经4电子途径还原为水. 与商业铂碳电极（Pt/C）相比,AgNPs/GQDs电极具有高催化电流密度、良好稳定性和极佳抗甲醇性能. 该银纳米粒子对开发高性能和低成本的非铂氧还原电催化剂有潜在的应用前景.     

Facile single-step preparation of Pt/N-graphene catalysts with improved methanol electrooxidation activity

In this work, we describe a facile single-step approach for the simultaneous reduction of graphene oxide to graphene, functional doping of graphene with nitrogen, and loading of the doped graphene with well-dispersed platinum (Pt) nanoparticles using a solvent mixture of ethylene glycol and N-methyl-2-pyrrolidone. The as-prepared Pt/nitrogen-doped graphene (N-graphene) catalysts are characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy while the electrocatalytic methanol oxidation properties of the catalysts are evaluated by cyclic voltammetry and chronoamperometry. Compared with an updoped Pt/graphene control catalyst, the Pt/N-graphene catalyst shows a narrower particle size distribution and improved catalytic performance. Considering the facile, green and effective single-step synthetic process for the Pt/N-graphene catalyst, the results are promising for the potential application of these materials in emerging fuel cell technologies.     

A Sensitive and Selective Nitrite Detection in Water Using Graphene/Platinum Nanocomposite

A glassy carbon electrode modified with reduced graphene oxide and platinum nanocomposite film was developed simply by electrochemical method for the sensitive and selective detection of nitrite in water. The electrochemical reduction of graphene oxide (GO) efficiently eliminates oxygen‐containing functional groups. Pt nanoparticles were electrochemically and homogeneously deposited on the ErGO surface. Field emission scanning electron microscopy (FE‐SEM), Raman spectroscopy, attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were used to examine the surface morphology and electrocatalytic properties of the Pt‐ErGO nanocomposite film‐modified electrode surface. The fabricated nitrite sensor showed good electrochemical performance with two linear ranges; one from 5 to 100 µM (R²=0.9995) and the other from 100 to 1000 µM (R²=0.9972) and a detection limit of 0.22 µM. The proposed sensor was successfully applied for the detection of nitrite in tap water samples which proves performance of the Pt‐ErGO nanocomposite films.     

石墨烯负载Pt催化剂的制备及催化氧还原性能

采用直接化学还原法, 以金属钠为还原剂, 四氯乙烯为碳源, 在石蜡油中不经氧化石墨(GO)和氧化石墨烯(GrO)而直接制备石墨烯(Gr), 然后将Pt纳米粒子担载在Gr基体上, 得到Pt/Gr催化剂, 并对其催化氧还原(OR)性能进行了研究. 通过X射线衍射(XRD), 透射电镜(TEM)和电化学测试对合成催化剂的结构、形貌和电化学性质进行了表征. 实验结果表明: 所制备的Pt/Gr催化剂具有较好的分散性, 平均粒径为3.1 nm; 氧还原起始电位比商业JM-Pt/C催化电极正移了24 mV; 交换电流密度达到1×10^-3 mA·cm^-2, 是商业JM-Pt/C催化电极的2.5倍.     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

Determination of Formaldehyde with a Platinum–Palladium–Graphene Nanocomposite Glassy Carbon Electrode

The oxidation of formaldehyde on a platinum (Pt)–palladium (Pd)–graphene nanocomposite glassy carbon electrode prepared by chemical reduction was characterized in 0.5?M sulfuric acid. The surface and morphology of the catalyst were characterized by transmission electron microscopy, Raman spectroscopy, and X-ray diffraction. Bimetallic Pt–Pd nanoparticles were uniformly dispersed on the graphene sheets. Energy-dispersed X-ray spectroscopy was used to characterize the metal composition of the nanocomposite. The electrocatalytical characteristics of the modified electrode were investigated by cyclic voltammetry. The results show that the electrode displayed high activity for the oxidation of formaldehyde in sulfuric acid with a linear relationship from 4.50?µM to 0.180?mM and a detection limit of 2.85?µM. The low detection limit, wide linear dynamic range, and high sensitivity of the modified electrode suggests further applications.     

Controllable Electrodeposition of Platinum Nanoparticles on Graphene Nanosheet for Methanol Oxidation Reaction

A simple and cost-effective electrochemical method synthesized platinum nanoparticles on graphene nanosheet (PtNPs@GNS) is reported, and the Pt loading of the PtNPs@GNS can be controlled by electrodeposition. The structure and element analysis of the PtNPs@GNS have been investigated by scanning electron microscopy (SEM), Raman spectrum, X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The electrochemical measurement including electrochemical active surface area, current density, mass activity, oxidation peak potential,shows the PtNPs@GNS have more performance electrocatalytic properties for methanol oxidation reaction (MOR) compared to Vulcan XC-72 carbon (XC-72) supported PtNPs electrocatalysts. Probably, the cause which may be attributes to no aggregation of PtNPs and the well-dispersion on surface of GNS, so PtNPs@GNS show large electrochemically active surface area, highly electrocatalytic activity and stability in direct methanol fuel cells.     

团聚铂纳米粒子电极在甲醇氧化中的电催化特性

用H2还原法并以Nafion作为稳定剂合成团聚的Pt纳米粒子，附载于玻碳表面制备电催化剂.透射电子显微镜（TEM）和扫描电子显微镜（SEM）表征结果指出,团聚Pt纳米粒子的平均尺寸约为400 nm.运用电化学循环伏安法(CV)和原位傅立叶变换红外反射光谱（in situ FTIRS）研究甲醇的氧化过程，发现团聚Pt纳米粒子电极具有较高的电催化活性.原位FTIRS研究结果检测到甲醇在所制备的电催化剂上氧化的中间体为线型吸附态CO物种，其红外吸收给出异常红外效应的光谱特征.     

Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol

A well‐known limitation in the fabrication of metal‐graphene composite has been the use of surfactants that strongly adsorb on the surface and reduce the performance of the catalyst. We demonstrate here a novel one‐pot synthesis of gold nanoparticles by laser ablation of gold strip and in‐situ decoration on graphene substrate. Not only the impregnation of nanoparticles was linker free, but also the synthesis by itself was surfactant‐free. The composite materials were well characterized morphologically and functionally using electron microscopy, X‐ray and electron diffraction, Raman spectroscopy, Zeta potential, electrochemical measurements and UV‐Visible spectroscopic techniques. This linker‐free gold‐graphene based composite has been employed for catalytic applications pertaining to electrooxidation. We have explored the use of this composite as a binder‐free electrode in electrocatalytic oxidation of methanol and ethanol in alkaline medium. Additionally, the onset potential for ethanol oxidation was found to be more negative, ?100 mV, an indication of its promising application in direct ethanol fuel cells.     

碱性介质中甲醇在铂电极表面吸附和氧化的电化学原位FTIR反射光谱和EQCM研究

运用电化学循环伏安、原位FTIR反射光谱和石英晶体微天平(EQCM)等方法研究了碱性介质中甲醇在Pt电极表面吸附和氧化行为. 结果表明: 甲醇电氧化与溶液酸碱性有密切的关系. 酸性介质中甲醇在Pt电极上的CV曲线有两个正向氧化峰, 而碱性介质中只有一个正向氧化峰, 第二个氧化峰的消失可能是由于碱性介质中Pt电极在高电位下形成高氧化态的氧物种毒化其表面引起的. 碱性介质中甲醇解离吸附产物的数量比酸性介质的明显减少, 对甲醇氧化的第一个氧化峰表现出更高的电催化活性. 目前实验条件下, 原位FTIR反射光谱检测到: 碱性介质中甲醇电氧化的最终产物是CO₂和CO₃^2－, 反应中间体主要为HCOO^－物种. 从电极表面质量定量变化的角度提供了甲醇反应机理的新数据.     

Hydrothermal Syntheses of NiO−GO Nanocomposite on 3D Nickel Foam as a Support for Pt Nanoparticles and its Superior Electrocatalytic Activity towards Methanol Oxidation

In this project, Pt/NiO?GO nanocatalyst is grown on nickel foam (NF) and, its catalytic activity towards electrochemical oxidation of methanol in acidic media is studied. The first step is devoted to the synthesis of NiO?GO support by a hydrothermal method. Then Pt nanoparticles (～34.3 nm) are electrodeposited on this supporting material. Hydrothermal and electrochemical deposition conditions are optimized. Surface of modified NF was inspected for physical characterization and Chemical composition by some techniques such as field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectra (EDS), and X‐ray diffraction (XRD). In the electrochemical section, the catalytic performance of Pt/NiO?GO/NF towards methanol oxidation is investigated by cyclic voltammetry and chronoamperometry measurements. The electrochemical impedance spectroscopy (EIS) is elected to deliberate charge transfer resistance on the catalyst surface. Mass activity, electrochemical surface area (ECSA) and durability of prepared catalysts are compared with commercial Pt/C. Deliberations prove the superiority of Pt/NiO?GO/NF towards methanol oxidation in acidic media. The Superior quality of synthesized nanocatalyst that is attributed to the synergetic effect of the NiO?GO support material and Pt nanoparticles, indicate that Pt/NiO?GO/NF can be successfully used as the anode in the direct methanol fuel cell (DMFC).     

A Highly Efficient,Clean‐Surface,Porous Platinum Electrocatalyst and the Inhibition Effect of Surfactants on Catalytic Activity

Herein we report a gentle seedless and surfactant‐free method for the preparation of clean‐surface porous platinum nanoparticles. In terms of electrocatalytic CH₃OH oxidation, the clean‐surface porous platinum exhibited better performance than platinum nanoparticles and a commercial Pt/C catalyst. The porous nanostructures exhibited 2.26‐fold higher mass activity and 2.8‐fold greater specific activity than the Pt/C catalyst. More importantly, three typical surfactants, cetyltrimethylammonium bromide/chloride (CTAB/C), poly(vinylpyrrolidone), and sodium dodecyl sulfate, were chosen to study the inhibition effect of surfactants on electrocatalytic performance. It was observed that the surfactants led to a clear selective decrease in electrocatalytic performance. CTAB/C inhibited the catalytic activity the most due to the stronger interaction between the OH‐enriched platinum surface and the positively charged molecules. Thus, this work indicates that these clean‐surface porous platinum nanoparticles may be used as efficient catalysts for direct methanol fuel cells and provides a greater understanding of the inhibition effects of surfactants on catalytic activity.