氯化原位接枝制备CPE-g-MMA接枝共聚物

氯化原位接枝制备CPE-g-MMA接枝共聚物;接枝共聚物结构;氯化原位接枝;力学性能     

接枝共聚的接枝参数表述方法的探讨

介绍了接枝共聚物接枝参数，如单体转化率、接枝率、接枝效率、均聚物含量及接枝频率，概述了对这些参数在进行表述淀粉接枝共聚时出现的种各种表达形式。在此基础上，指出了这些其在表达上出现的混乱现象。     

PP固相接枝改性研究进展

聚丙烯(PP)是一种具有优异性能且价格低廉的通用高分子材料,但由于聚丙烯为非极性聚合物,其染色性、亲水性、粘结性等均较差,且与其它材料的相容性也很差,这些缺点限制了聚丙烯的应用。通过固相接枝法改性聚丙烯,不仅可以在保持聚丙烯原有优异性能的情况下引入极性官能团,而且具有低温、低压、低成本、较高的接枝率和无需溶剂回收等优点。本文简要介绍了PP固相接枝反应机理,从接枝单体角度综述了近几年PP固相接枝改性的研究进展,并讨论了反应工艺对接枝产物的接枝率、接枝效率和性能的影响。     

球形聚丙烯粒子固相接枝苯乙烯的研究

用负载型高效球形催化剂催化丙烯本体聚合获得了孔隙率较高的球形聚丙烯 (PP)粒子 .研究了苯乙烯在这种球形多孔PP粒子中的接枝聚合反应 ,考察了各种聚合条件对接枝率及接枝效率的影响 ,并用FTIR、DSC、GPC、粘度测定及偏光显微镜 (PLM)等方法表征了接枝聚合产物的结构和形态 .研究表明 ,球形PP粒子固相接枝苯乙烯不仅可达较高接枝率 (最高达 2 4 % )和接枝效率 (最高达 5 6 7% ) ,PS相区尺寸小、分布均匀 ,而且产物为形态规则的球形颗粒 ,有利于防止聚合物结块和粘壁 .但PP接枝PS后分子量有所下降 ,表明PP接枝PS的同时伴随着轻微的降解     

马来酸酐-苯乙烯多组分单体熔融接枝高密度聚乙烯机理及性能研究

用单螺杆挤出机制备了马来酸酐-苯乙烯(MAH-St)多单体熔融接枝高密度聚乙烯(HDPE)体系,研究发现添加St共同接枝,可以显著提高接枝物的接枝率.随着St的增加,接枝率先增大后有所降低.当两种单体物质的量比约为1:1时,接枝物的接枝率最高,此时接枝物的熔体流动速率(MFR)最小.即MAH接枝率越高,接枝物的MFR越...     

无规聚丙烯接枝甲基丙烯酸的合成

采用溶液聚合的方法将无规聚丙烯 (APP)与甲基丙烯酸 (MAA)接枝共聚制得接枝共聚物APP -g -MAA。讨论了反应温度、反应时间、引发剂BPO浓度、单体MAA浓度对接枝率的影响。结果表明 :当聚合反应温度低于是 12 0℃时 ,接枝率随温度升高而降低。延长反应时间有利于提高接枝率。最适宜的引发剂浓度为 1% ,MAA/APP配比为 0 .2 5/1。利用红外光谱证实了接枝物APP-g -MAA的存在。     

1,6-己二醇二丙烯酸酯和苯乙烯多单体熔融接枝制备长支链聚丙烯研究

采用哈克转矩流变仪制备了1,6-己二醇二丙烯酸酯(HDDA)和苯乙烯(St)多单体熔融接枝聚丙烯(PP)体系.红外测试结果表明St的加入能够促进HDDA接枝到PP主链,提高接枝率.动态流变行为研究结果也表明采用多单体熔融接枝PP更有利于体系在熔融接枝中生成长支链(LCB).随着St单体添加量的增加,HDDA的接枝率增大...     

基于“透过表面接枝”方式制备低分散性和高接枝密度聚合物刷的研究

"透过表面接枝"(grafting-through)是一种聚合物表面改性的新方法,可以显著改善传统grafting-from和grafting-to方法接枝工艺的缺陷,获得兼具高接枝密度和低分散性的聚合物刷产物.本文采用布朗动力学模拟方法,模拟研究了grafting-through方法接枝聚合物刷过程中的主控因素,从微观动力学角度阐明其特有的链增长趋同化效应是保持产物聚合物刷较低分散性的主因.引发效率在grafting-through中可显著提高,且产物聚合物刷的分子量呈现泊松分布.此外,反应中保持高的单体通量,可以同时实现产物聚合物较长的平均链长和较低的分散性,有利于制备性能优异的改性材料.该研究对深入理解grafting-through接枝过程的动力学主控因素,促进grafting-through技术的推广和工艺的改进具有一定的理论指导意义.     

原生态聚丙烯等离子处理接枝甲基丙烯酸甲酯

将等离子体接枝技术，用于原生态聚丙烯接枝甲基丙烯酸甲酯共聚物的合成，ＦＴ－ＩＲ证明所得产物为接枝共聚物，研究了不同等离子体处理功率，时间，不同接枝聚合反应时间，温度对接枝的影响，以及稀释剂、聚丙烯粒度对接枝的影响，结果表明，接枝过程中有自动加速现象，稀释剂亦使接枝有加速效应，接枝过程为扩散控制过程。     

壳聚糖接枝共聚改性最新研究进展

壳聚糖是一种天然高分子,也是迄今为止唯一发现的阳离子碱性多糖。壳聚糖分子链中富含羟基和氨基等反应性官能团,具有生物相容性、生物可降解性、抗菌性、无细胞毒性等优良性能,在生化、医药、环保、农业等领域有广泛的应用前景。然而,由于其大分子具有较好的立构规整性和较强的氢键作用,除稀盐酸、稀醋酸外,壳聚糖不溶于水和其它有机溶剂,因而限制了它的应用范围。为了扩大其应用领域,常通过接枝共聚反应来改善壳聚糖的性能。本文介绍了壳聚糖接枝共聚改性的最新研究进展,包括自由基引发接枝法、偶联接枝法以及催化接枝法。     

Thermal behavior of the maleic anhydride modified poly(3-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB has been structurally modified through reaction with maleic anhydride, MA. Transesterification reaction was carried out fixing the PHB and MA and besides time and temperature the concentration of the triethylamine (used as catalyst) was changed. Glass transition, melting and crystallization temperature obtained from DSC curves and thermal degradation temperatures obtained from TG traces were used to evaluate the influence of the reaction conditions on the modification of PHB according to factorial design. On the base of the results the optimum conditions are to perform the PHB modification reaction with MA reaction at 110°C for 1 h with 5% v/v triethylamine.     

聚β-羟基丁酸酯顺丁烯二酸酐接枝共聚物的研究

采用DSC、TGA、POM和WAXD等方法对聚 β 羟基丁酸酯 (PHB)及其接枝顺丁烯二酸酐共聚物 (PHB g MA)的结晶行为、热稳定性和生物降解特性进行了研究 .结果表明接枝产物的热稳定性明显优于PHB ,热分解温度提高了 2 0余度 ;结晶行为发生很大的变化 .结晶速率减小 ,结晶温度降低 ,冷结晶温度升高 ,球晶的织态结构也随着MA接枝量的变化发生明显变化 ,并且接枝MA促进了PHB的生物降解     

Potassium diperiodatonickelate‐initiated graft copolymerization of methyl acrylate onto organophilic montmorillonite

Using potassium diperiodatonickelate (Ni (IV)) as an efficient initiator, the graft copolymerization of methyl acrylate (MA) onto organophilic montmorillonite (OMMT) was successfully performed in an alkaline medium. Three grafting parameters were systematically evaluated as functions of the temperature, the initiator concentration, reaction time, pH value, and the ratio of MA to OMMT substrate. The structure of the titled graft copolymers (OMMT‐g‐PMA) were confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), and thermo‐gravimetric analysis (TGA). It was found that Ni (IV) was a highly efficient initiator for graft copolymerization of the MA onto OMMT, i.e., grafting efficiency is as high as 95% and grafting percentage can be facilely controlled within 700% in this study. In addition, the highest grafting efficiency and grafting percentage were obtained when temperature adopted was over 40°C and pH was about 10.3. A single‐electron‐transfer mechanism was proposed to illustrate the formation of radicals and the initiation reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and Characterization of CPE-g-GMA Graft Copolymers Obtained by Suspension Copolymerization

Graft of glycidyl methacrylate (GMA) onto solid-state chlorinated polyethylene (CPE) has been performed by suspension copolymerization in a complex dispersion medium which was a compound with H₂O, ethyl acetate (EA) and tert-butyl alcohol (TBA). Benzoyl peroxide (BPO) was used as the free radical initiator. The graft level (graft degree and graft efficiency) was calculated gravimetrically, and the graft copolymer was characterized by infrared (IR) spectroscopy, thermogravimetric analysis (TGA) and contact angle study. The effects of reaction conditions on graft level, including chemical parameters (the concentration of monomer, initiator, and interfacial agent) and processing parameters (reaction time and temperature), have been investigated in detail. The experimental results showed that GMA could be grafted onto the chain of CPE with comparative higher graft degree, which could reach 37% with graft efficiency above 80%.     

二过碘酸合铜(Ⅲ)钾引发丙烯腈在聚丙烯酰胺上接枝共聚合反应的研究

本文以二过碘酸合铜(Ⅲ)钾为氧化剂,聚丙烯酰胺(PAAM)自身为还原剂组成的氧化还原引发体系,在PAAM上引发丙烯腈接枝共聚合反应,获得了高接枝效率和高接枝百分比的产物,由红外光谱、扫描电镜及X射线衍射分析对接枝反应进行了表征,测定了各种条件对接枝参数的影响,并对引发机理进行了探讨。     

GRAFT COPOLYMERIZATION OF METHYL ACRYLATE ONTO CHITOSAN INITIATED BY POTASSIUM DIPERIODATONICKELATE (IV)

ABSTRACT

A novel redox system, potassium diperiodatonickelate [Ni (IV)]‐chitosan, was employed to initiate the graft copolymerization of methyl acrylate (MA) onto chitosan in alkali aqueous solution. The effects of reaction variables such as monomer concentration, initiator concentration, reaction time, pH and temperature were determined. By means of a series of copolymerization, the grafting conditions were optimized. The maximum grafting percentage obtained was 404.1% when 0.3 g chitosan was copolymerized with 1.8 mL monomer at 35°C for 5 hours with [Ni (IV)]=9.4×10^?4 M and the total volume was 20 mL. Ni (IV)-chitosan system is found to be an efficient redox initiator for this graft copolymerization. A single electron transfer mechanism is proposed to explain the formation of radicals and the initiation. The grafted copolymers were characterized by IR and X-ray diffraction diagrams. The thermal stability of chitosan and chitosan-g-PMA was studied by thermogravimetric analysis (TGA).     

高锰酸钾引发魔芋粉/丙烯酰胺接枝共聚合及其增稠性研究

用KMnO4作引发刺对魔芋粉(KGM)与丙烯酰胺(AM)进行了接枝共聚反应．研究了引发剂浓度、接枝单体浓度、体系酸度、反应温度、反应时间以及KGM预氧化时间等条件对接枝效率的影响．结果表明：在适宜的条件下，接枝效率可达90％以上，并且接枝物的水溶性与增稠性得到较大的改善。     

Biodegradability of poly(3-hydroxybutyrate) film grafted with vinyl acetate: Effect of grafting and saponification

Radiation-induced graft polymerization of vinyl acetate (VAc) onto poly(3-hydroxybutyrate) (PHB) film was carried out. At a degree of grafting higher than 5%, the grafted films (PHB-g-VAc) completely lost the enzymatic degradability that is characteristic of PHB due to the grafted VAc covering the surface of the PHB film. However, the biodegradability of the PHB-g-VAc films was recovered when the films were saponified in alkali solution under optimum conditions. Graft chains of the PHB-g-VAc film reacted selectively to become biodegradable polyvinyl alcohol (PVA). The biodegradability of the saponified PHB-g-VAc film increased rapidly with time.     

WATER-SOLUBLE AMPHOLYTIC GRAFTED POLYSACCHARIDES. 1. GRAFTING OF THE ZWITTERIONIC MONOMER 2-(2-METHACRYLO-ETHYLDIMETHYLAMMONIO) ETHANOATE ONTO HYDROXYETHYL CELLULOSE

Novel ampholytic grafted polysaccharides were prepared by grafting the Zwitterionic monomer 2-(2-methacryloethyldimeth-ylammonio) ethanoate onto hydroxyethyl cellulose. Ethylenediamine tetraacetic acid was used in combination with ceric ammonium nitrate as the redox initiator. The effects of various factors such as initiator amount, monomer concentration, reaction temperature and time on the grafting were studied and the optimum reaction conditions to obtain maximum degree of grafting were found. The resulted graft copolymer was characterized by IR and thermal analyses.     

二过碘酸合银(II)氧化还原引发丙烯酸甲酯在尼龙1010上接枝共聚合反应的研究

二过碘酸合银（ＩＩ）氧化还原引发丙烯酸甲酯在尼龙１０１０上接枝共聚合反应的研究刘盈海刘卫宏赵敏孟劲功（河北大学化学系保定０７１００２）关键词二过碘酸合银（ＩＩ）钾，尼龙１０１０，氧化还原引发，丙烯酸甲酯，接枝共聚目前Ｃｅ（ＩＶ）被认为是一种十分...