聚酚酞醚砜-聚硅氧烷-聚醚氨酯多嵌段聚合物

<正> 合成了端异氰酸酯基聚硅氧烷-聚醚氨酯嵌段预聚物和端羟基酚酞醚砜齐聚物,探索了上述预聚物与齐聚物间的活泼氢转移加成反应,对所得的多嵌段聚合物做了初步的结构形态表征。 试验用单体:酚酞、4,4′-二氯二苯砜、TDL_(2,4)、MDI、低分子量聚氧化丙烯二醇N-     

PPV-b-PMMA二嵌段共聚物的ATRP合成及其有序自组装

在分子设计的基础上,合成了以Br为端基的聚(2,5-二辛氧基对亚苯基亚乙烯基)(PPV-Br)低聚体,并采用甲基丙烯酸甲酯(MMA)原子转移自由基聚合法,以该低聚体作为大分子引发剂,合成了PPV-b-PMMA二嵌段共聚物.经FTIR、UV-Vis、1H-NMR和GPC等表征手段证明,所合成的PPV-b-PMMA二嵌段共聚物具有分子设计的预定结构.PPV大分子引发剂和PPV-b-PMMA二嵌段共聚物的多分散性指数分别为1.3和1.2.在温度、氩气流速和相对湿度分别为22℃、0.2 m3/h和85%的条件下,以CS2为溶剂,实现了该二嵌段共聚物的高度有序六角蜂窝状结构薄膜的自组装.空穴的平均直径为1.7μm.     

季铵盐催化合成端烯丙基聚氧化烯大单体

用季铵盐作催化剂，由聚氧　化乙烯－氧化丙烯嵌段共聚物和烯丙基氯合成了端烯丙基聚氧化烯大单体，考察了催化剂及其用量，溶剂及反应温度，反应时间对反应封端率的影响，确定了最佳反应条件；与Ｗｉｌｌｉａｍｓｏｎ醚合成法比较，季铵盐催化法操作简便安全，并且可以制得封端率高的端烯丙基聚氧化烯大单体。     

基于双锂法的炔基功能化热塑性弹性体的合成

苯乙烯-异戊二烯-苯乙烯三嵌段聚合物(SIS)是目前广泛使用的一种热塑性弹性体(TPE)材料, 建立高效、 精准、 普适的SIS功能化方法一直是提高TPE材料性能的关键. 首先, 利用双烯单体与单官能度引发剂的反应合成了双官能度的双锂引发剂; 然后采用双锂引发法, 以炔基功能化单体封端, 高效合成了α,ω-端炔基官能化SIS聚合物. 采用叔丁醇锂作为异戊二烯聚合段的调节剂, 叔丁醇钾作为苯乙烯聚合段的调节剂, 合成了低乙烯基结构含量(5.8%)、 窄分子量分布(<1.17)的SIS三嵌段聚合物; 再向SIS三嵌段聚合物中一步加入炔基官能化的1,1-二苯基乙烯(DPE)衍生物进行封端, 以高于90%的收率高效合成了α,ω-端炔基官能化SIS三嵌段模块聚合物, 借助炔基的高效点击反应, 实现了功能化及拓扑化TPE材料的制备.     

超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物的合成与表征

合成了超支化聚苯乙烯-线型聚苯乙烯-超支化聚甲基丙烯酸甲酯三嵌段聚合物(HPS-b-LPS-b-HPMMA). 首先分别合成了带有炔基和溴的三硫代碳酸酯(ATC和BTC), 然后通过苯乙烯(St)的可逆加成-断裂链转移(RAFT)聚合, 制得端炔基和端基溴的线型聚苯乙烯大分子RAFT试剂, 然后将大分子RAFT试剂的溴末端转化为叠氮末端. 接着在大分子RAFT试剂存在情况下, 通过自缩合原子转移自由基共聚合(SCATRCP)分别制得端炔基超支化聚苯乙烯-线型聚苯乙烯(HPS-b-LPS)和端叠氮基超支化聚甲基丙烯酸甲酯-线型聚苯乙烯(HPMMA-b-LPS)两嵌段聚合物. 最后将两种两嵌段聚合物通过点击(click)反应偶合, 得到不对称的超支化-线型-超支化三嵌段聚合物HPS-b-LPS-b-HPMMA. 核磁共振氢谱(¹H NMR)、凝胶渗透色谱(GPC)结果表明, 所得产物分子量可控, 得到了预期结构的聚合物.     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物的合成及性能研究

采用电子转移再生催化剂原子转移自由基聚合(ARGET ATRP)制备了端羟基聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物(HO-PBA-b-PMMA),在此基础上,与六亚甲基二异氰酸酯三聚体(N3390)反应,合成了多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物.通过凝胶渗透色谱(GPC)、核磁共振仪(1H-NMR)、傅里叶变换红外光谱计(FTIR)对聚合物的结构进行了表征,利用原子力显微镜(AFM)观察了其形貌,采用动态热机械分析仪(DMA)和万能拉伸机研究了聚合物的热性能、力学性能及多臂嵌段共聚物对PMMA的增韧性能.结果表明:成功制备了端羟基聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯,以及多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物.在异氰酸酯基/羟基(NCO/OH)摩尔比为1.2/1时,制得的多臂嵌段共聚物相对分子质量最大,Mark-Houwink参数α值最小,表明此时三臂嵌段共聚物最多.多臂嵌段聚合物的拉伸强度和断裂伸长率比线型聚合物均有明显提高,且在NCO/OH摩尔比为1.2/1时达到最大,分别为7.6 MPa和73%.多臂嵌段聚合物具有更高的玻璃化转变温度(Tg).通过原子力显微镜(AFM)表明,多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物形成了以聚丙烯酸丁酯链段为核,聚甲基丙烯酸甲酯为壳的核壳结构.具有核壳结构的多臂聚丙烯酸丁酯-b-聚甲基丙烯酸甲酯嵌段共聚物对聚甲基丙烯酸甲酯有明显的增韧作用.     

PEO-PPO-PEO水溶液体系胶束化及凝胶化行为的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative particle dynamics, DPD)模拟方法研究了三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO)的胶束化和凝胶化行为. 通过模拟得到了F127(EO₉₉PO₆₅EO₉₉)水溶液的临界胶束浓度和临界凝胶浓度. 结果发现, 在298 K、 质量分数低于40%时, F127水溶液中形成的胶束形状均为球形. 此外,进一步研究了亲水嵌段长度对胶束结构及凝胶形成浓度的影响, 结果发现, 亲水嵌段越短, 越有利于长椭球状胶束的形成, 而临界凝胶浓度随着亲水嵌段PEO长度的增加而降低.     

利用酶促开环聚合和原子转移自由基聚合方法合成AB型嵌段共聚物

我们用端基官能化方法实现两种聚合反应的结合, 成功地制备了AB型双嵌段共聚物PCL-b-PSt和BAB型三嵌段共聚物PSt-b-PCL-b-PSt. 本文利用上述方法, 将酶促开环聚合和原子转移自由基聚合有机地结合起来, 合成了AB型嵌段共聚物-聚己内酯/聚甲基丙烯酸环氧丙酯(PCL-b-PGMA. 此嵌段共聚物具有良好的生物相容性, 在现代生物领域具有广泛的应用前景.     

AB及ABA型聚苯乙烯(A)-聚氧乙烯(B)嵌段共聚物的合成及其结构的表征

合成了α-苯基乙基钾,并用于制备AB型聚苯乙烯(A)-聚氧乙烯(B)嵌段共聚物。研究了聚合时间和温度的影响。通过含一个端羟基的AB嵌段共聚物与偶联剂甲苯二异氰酸酯反应制得ABA型嵌段共聚物。二种共聚物均经纯化,并用NMR、IR、UV、DSC、偏光显微镜及X-射线衍射法表征,且与均聚物的混合物比较。     

线型聚砜-聚硅氧醚氨酯嵌段聚合物的合成和结构性能的探索

<正> 最近,聚硅氧醚与聚氨酯、聚碳酸酯或聚砜等的嵌段聚合物作为高分子结构材料和功能材料发展较快。本文将带有反应基的齐聚物与予聚物,通过对—NCO基的氢加成反应制得了线型聚砜-聚硅氧醚氨酯嵌段聚合物,考察合成反应特点的同时,初步研究了嵌段聚合物的结构和性能。     

聚醚型多嵌段共聚物软链段结晶特性的研究

本文使用虹外光谱及膨胀计等方法,对聚四亚甲基醚二醇类多嵌段共聚物的软链段结晶性进行了研究。在聚醚-聚酯多嵌段共聚物中(PTMEG>60％),其软链段结晶的熔点和结晶速率均随PTMEG含量减少而下降。而在聚醚-聚脲胺酯多嵌段共聚物中,由于N—H和C—O—C之间氢键的作用,即使在低温下,其软链段也难于结晶。此外,高倍拉伸会提高上述二类多嵌段共聚物中软链段结晶的熔点和结晶速率。     

Self-assembly of amphiphilic ABC star triblock copolymers and their blends with AB diblock copolymers in solution: self-consistent field theory simulations

The self-assembled morphologies of amphiphilic ABC star triblock copolymers consisting of hydrophilic A blocks and hydrophobic B and C blocks and the blends with their counterpart linear AB diblock copolymers in solution are investigated by 2D real-space implementation of self-consistent field theory (SCFT) simulation. The star triblock copolymers self-assemble in solution to form various micellar structures from hamburger, to segmented wormlike, to toroidal segmented micelles, and finally to vesicles with simultaneously increasing hydrophobic lengths of blocks B and C. When the length of hydrophobic blocks B and C is asymmetric, specific bead-on-string worm micelles are found. Particularly, when the star ABC triblock copolymer is in a strong segregation regime and both B and C blocks are strongly hydrophobic, quite long segmented wormlike micelles are obtained, which had not been found in previously investigated diblock and linear ABC triblock copolymers solution. Additionally, raspberry micelles with beads dispersed on the core also occur in the strong segregation regime of bulk star ABC triblock copolymers. Furthermore, the aggregate morphology of ABC star triblock copolymers is strongly influenced by the addition of linear AB diblock copolymers. The most significant feature is that the long segmented worms will become shorter, to form hamburger micelles with the addition of AB diblock copolymers. These simulations are in good agreement with the experimental findings by Lodge's group.     

多嵌段共聚物分子的组成不均一性

从不同结构层次角度说明了多嵌段共聚物的分子组成不均一性。提出了一种新的看法,即在讨论多嵌段共聚物的形态和性能时,除了链段间的微相分离外,还必须首先考虑不同平均链段长度的多嵌段大分子间的宏观相分离作用。如何表征与控制其组成不均一性是十分重要的课题。     

新型含有机硅二元多嵌段共聚物的研究

报道了聚羟基醚（ＰＨＥ）、聚羟基醚砜（ＰＨＥＳ）、酚酞聚羟基醚（ＰＰＨＥ）和聚对羟基苯乙烯（ＰＨＳ）与端胺基聚二甲基硅氧烷（ＰＤＭＳ）通过羟胺缩合生成ＡＢｍｎ新型结构的可溶性含有机硅二元多嵌段共聚物，ｍ值在１～６之间，详细讨论了反应物浓度对共缩聚反应的影响，并通过分子量测定、红外光谱分析和动态力学分析（ＤＭＡ）技术初步确定了其反应机理、结构和动态力学性能．     

On the Fundamental Polymer Chemistry of Inverse Vulcanization for Statistical and Segmented Copolymers from Elemental Sulfur

In this concept review, the fundamental and polymerization chemistry of inverse vulcanization for the preparation of statistical and segmented sulfur copolymers, which have been actively developed and advanced in various applications over the past decade is discussed. This concept review delves into a discussion of step-growth polymerization constructs to describe the inverse vulcanization process and discuss prepolymer approaches for the synthesis of segmented sulfur polyurethanes. Furthermore, this concept review discusses the advantages of inverse vulcanization in conjunction with dynamic covalent polymerization and post-polymerization modifications to prepare segmented block copolymers with enhanced thermomechanical and flame retardant properties of these materials.     

MORPHOLOGY OF BISPHENOL A POLYSULFONE-POLYOXYPROPYLENE SEGMENTED COPOLYMERS

Morphology of bisphenol A polysulfone-polyoxypropylene segmented copolymers was inves-tigated by means of differential scanning calorimetry and transmission electron microscopy. Theresults show that the molecular weights of the hard and soft segments have a pronounced effect onthe morphology of these segmented copolymers, which may changr from three-phase to single-phasestructure depending on the size and the relahve size of the segments. Heat treatment will enhancethe process of phase separation, increasing the domain size of the dispersed phase, Results obtainedby study on the dynamic mechanical properties of these copolymers well support the existence ofthree-phase morphological structure.     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

长软链段对苯二甲酸乙二酯-环氧乙烷多嵌段共聚物的组成不均一性研究

合成了不同软链段长度和不同硬链段含量的系列对苯二甲酸乙二酯－环氧乙烷(PET-PEO)多嵌段共聚物,用NMR质子港测定了硬链段含量,对部分溶于氯仿的PET－PEO多嵌段共聚物进行了分离,并分别测定其氯仿可溶物和不溶物的硬链段含量、熔融热谱和热结晶谱.揭示了PET－PEO多嵌段共聚物的组成不均一性及其对软镇段长度和硬链段含量的依赖性,进而用DSC热谱证明了软链段和硬链段的结晶能力与PET－PEO多嵌段共聚物组成不均一性密切相关.     

Bulk and surface properties of blends with semifluorinated polymers and block copolymers

The goal of the investigation presented here is the development of extremely hydrophobic materials based on polysulfone that can be applied, for instance, as fouling-resistant membrane materials. The concept used is the addition of semifluorinated polymers to polysulfone in suitable blend compositions. The influence of molecular parameters like chain structure of the semifluorinated polymer (segmented block copolymers, random copolymers) and segment molecular weight on the state of phase separation in the bulk and its influence on the surface properties have been systematically examined. It could be shown that segmented block copolymers with semifluorinated polyester segments with intermediate segment molecular weight are more suitable in blends with polysulfone than random polysulfone copolymers having semifluorinated side chains with respect to form homogeneous thin films (coatings) with highly non-wetting properties.