规模化养殖场废水中抗生素种类及残留特征研究

2010年调查了海南省6家规模化养猪场抗生素使用品种及来源,并采集养殖废水样品,用高效液相色谱紫外检测器检测了样品中4种四环素(四环素、土霉素、金霉素和强力霉素)和8种磺胺类药物(磺胺嘧啶、磺胺甲噻唑、磺胺噻唑、磺胺二甲基嘧啶、磺胺氯哒嗪、磺胺邻二甲氧嘧啶、磺胺间二甲氧嘧啶和磺胺喹恶啉)的残留浓度水平。结果显示,6家养殖场废水中土霉素、四环素和磺胺嘧啶的检出率及检出浓度较高,其中土霉素检出率为100%,最高浓度为71.75μg/L;四环素检出率为63%,最高检出浓度为24.83μg/L;磺胺嘧啶检出率为83%,最高检出浓度为17.69μg/L。4种四环素类检出总量变化范围为18.25～99.64μg/L,8种磺胺类检出总量变化范围为3.45～24.49μg/L;从养殖规模上看,小规模养殖场抗生素类检出品种较多,检出浓度也较高。     

养殖废水中四环素HPLC分析方法的研究

为了评价养殖废水中四环素类抗生素残留的状况,建立了养猪场废水中四种常见四环素类抗生素(土霉素、四环素、金霉素、强力霉素)的高效液相色谱分析方法.水样中四环素类药物经HLB固相萃取小柱吸附,甲醇乙酸乙酯溶液洗脱后用高效液相色谱紫外检测器测定.在0.05～10.00 μg/mL.范围内,四种抗生素的峰面积与质量浓度的线性关...     

皮毛加工业废水治理的常用技术与展望

简要介绍了皮毛加工业生产工艺及废水排污特点,重点介绍了皮毛加工企业处理综合废水的混凝沉淀或气浮+接触氧化法、混凝沉淀+A/O法、混凝沉淀+二级A/O法、混凝沉淀或气浮+A2/O+A/O法等几种常用治理技术,详细总结了这几种治理技术的优缺点和适用方向,并对今后皮毛加工业废水治理中污染物的资源化和循环利用等方面进行了展望分析,希望对广大皮毛加工企业以及环保治理单位起到很好的借鉴和参考作用。     

N掺杂TiO_2纳米材料对盐酸四环素废水吸附性能研究

以乳液法制备的N-TiO_2纳米材料为吸附剂,对盐酸四环素模拟废水进行了吸附实验。结果表明,在298K、pH=6时,静态吸附容量达27.82mg/g,盐酸四环素的去除率为92.7%;动态吸附量达22.09mg/g,盐酸四环素的去除率为67%;N-TiO_2纳米材料对盐酸四环素的吸附动力学规律符合准一级吸附模型,k=0.01928min-1,Ea=-3.322kJ/mol,吸附为自发的放热过程。其吸附行为与Langmuir和Freundlich方程均吻合。以上实验结果证明,N-TiO_2纳米材料是一种性能优良的吸附剂,能够有效去除模拟废水中的盐酸四环素。     

臭氧氧化技术处理含抗生素废水*

本文详细介绍了臭氧氧化技术的基本原理,分析了臭氧投加量、反应温度、溶液pH值、UV、H₂O₂及催化剂等因素对臭氧氧化处理抗生素废水效果的影响。根据抗生素的不同分类,综述了近年来关于臭氧氧化技术处理β-内酰胺、大环内酯、磺胺、喹诺酮、四环素、氯霉素六类常见抗生素废水的研究进展,并展望了臭氧氧化处理抗生素等难降解有机废水的发展趋势以及所面临的主要问题。     

树脂吸附法处理高浓度DSD酸氧化工序生产废水的研究

本文采用大孔吸附树脂固定床工艺处理DSD酸氧化工序生产废水。实验结果表明，ND804大孔吸附树脂对该废水具有良好的吸附－脱附效果，废水经ND804树脂吸附处理后，CODCr由14790mg/L降至1300mg/L左右，COD去除率约为91％，并可回收纯度达80％的DNS酸，废水在得到有效治理的同时实现了废物的资源化。     

治理明胶生产废水污染研究进展

本文参考有关文献,详细论述了废水处理技术在明胶生产废水治理中的应用与发展.在分析明胶废水污染现状、废水水质特性的基础上,从混凝、生物处理、清洁生产、超滤膜处理、污泥处理、蛋白质回收、环境健康研究几个方面综述了迄今为止围绕明胶生产废水治理所开展的有关研究工作和治理技术.     

毛细管电泳法分离四环素及其杂质

用毛细管电泳方法分离四环素和它的主要杂质４－差向四环素，脱水四环素，４－差向脱水四环素和２－乙酰基－２－脱酰胺四环素，相对次要的杂质氯四环素和脱甲四环素也能被分 离。     

毛细管电泳法分离四环素及其杂质

用毛细管电泳方法分离四环素和它的主要杂质４－差向四环素，脱水四环素，４－差向脱水四环素和２－乙酰基－２－脱酰胺四环素，相对次要的杂质氯四环素和脱甲四环素也能被分离。并系统研究了缓冲液ｐＨ，缓冲液浓度以及毛细管温度和电压对分离的影响。紫外检测波长是２７０ｎｍ，测定的相对标准偏差为１．９％。所得结果与ＨＰＬＣ方法进行了比较     

共热解法制备葵花籽壳活性炭及对四环素的吸附性能

采用热解法,以磷酸为活化剂,以葵花籽壳为碳源,制备了葵花籽壳活性炭,利用扫描电镜表征了其表面形貌,采用平衡吸附法研究了葵花籽壳活性炭对溶液中四环素的吸附性能和对养殖废水中四环素的去除能力。结果表明,在20°C时,葵花籽壳活性炭对四环素的最大吸附量为244.1 mg·g~(-1);吸附平衡时间为30 min;当pH值处于4-8时,pH值对葵花籽壳活性炭吸附四环素的容量没有显著性影响;葵花籽壳活性炭吸附四环素的容量随着温度的升高而增大,表明四环素吸附是一个吸热过程;利用葵花籽壳活性炭去除含有四环素的养殖废水时,四环素的去除率达到96.2%。等温吸附曲线符合Langmuir等温吸附模型;四环素的吸附动力学数据均符合准二级反应动力学模型。     

Electrochemical detection of a powerful estrogenic endocrine disruptor: Ethinylestradiol in water samples through bioseparation procedure

The synthetic estrogen ethinylestradiol (EE2) is an active component of oral contraceptives (OCs), considered as an endocrine disrupting compound (EDC). It is excreted from humans and released via sewage treatment plant effluents into aquatic environments. EDCs are any environmental pollutant chemical that, once incorporated into an organism, affects the hormonal balance of various species including humans. Its presence in the environment is becoming of great importance in water quality. This paper describes the development of an accurate, sensitive and selective method for capture, preconcentration and determination of EE2 present in water samples using: magnetic particles (MPs) as bioaffinity support for the capture and preconcentration of EE2 and a glassy carbon electrode modified with multi-walled carbon nanotubes (MWCNTs/GCE) as detection system. The capture procedure was based on the principle of immunoaffinity, the EE2 being extracted from the sample using the anti-EE2 antibodies (anti-EE2 Ab) which were previously immobilized on MPs. Subsequently the analyte desorption was done employing a sulfuric acid solution and the determination of the EE2 in the pre-concentrated solution was carried out by square wave voltammetry (SWV).     

Applicability of anthracite filtration‒micro electrolysis‒sand filtration for the treatment of surface waters containing high turbidity

The effect of combined filtration efficiency on the performance of anthracite filtration?micro electrolysis?sand filtration (AMS) was investigated. Impact of different operating parameters, such as iron?carbon ratio of micro electrolytic units, filtration velocity of AMS, were studied. It was found that when iron?carbon ratio was 6: 4, the AMS’s average turbidity removal rate was 96.75% at the filtration velocity of 3 m h^?1. The results showed that when the filtration rate was 3?9 m h^?1 and iron?carbon ratio was 6: 4, the turbidity removal efficiency was over 94%, and the turbidity of the effluent was less than 1 NTU in effective filtration cycle. The effective filtration cycle can last for more than 5 h or longer. Meanwhile, the removal rate of UV₂₅₄ was above 33%, and the concentration of iron ions in the effluent is less than 0.15 mg L^?1. Turbidity and iron indicators have reached the national drinking water standards. It was also found the mechanism of iron?carbon micro electrolytic enhanced filtration by infrared spectroscopy and scanning electron microscopy. And It was also speculated the reasons for the reaction passivation.     

MgO负载Fe基催化剂选择性合成单/双/多壁碳纳米管

通过浸渍及水热处理获得MgO负载的Fe基催化剂,并将其用于化学气相沉积过程裂解甲烷获得碳纳米管.结果表明,单/双/多壁碳纳米管可选择性地生长在Fe负载量不同的Fe/MgO催化剂上.当Fe负载量仅为0.5%时,铁原子在载体表面烧结为0.8～1.2nm的铁颗粒,碳在这种小颗粒上以表面扩散为主,导致单壁碳纳米管形成,并且单壁碳纳米管的选择性高达90%.当Fe负载量提高到3%时,铁原子聚集成约2.0nm的颗粒,在化学气相沉积中生长碳纳米管时,碳在Fe催化剂颗粒中的体相扩散的贡献增大,在表相扩散和体相扩散的共同作用下,双壁碳纳米管的选择性显著增高.当进一步增加Fe负载量时,铁原子烧结形成1～8nm的颗粒,经过化学气相沉积,在催化剂上生长了单、双、多壁碳纳米管.随着Fe在MgO载体上负载量的增加,管径、管壁数以及半导体管的含量都增加.本研究提供了一种适合大批量选择性生长单/双/多壁碳纳米管的方法.     

Heat-treated Fe/N/C catalysts for O2 electroreduction: are active sites hosted in micropores?

Limited availability of platinum is a potential threat to fuel cell commercialization. Since the 1970s, alternative catalysts to the electrochemical reduction of oxygen have been obtained from heat treatment at T > 600 degrees C of carbon with a non-noble metal and a source of nitrogen atoms. However, the process by which the heat treatment activates these materials remains an open question. Here, we report that the activation process of carbon black and iron acetate heat-treated in NH(3) comprises three consecutive steps: (i) incorporation of nitrogen atoms in the carbon, (ii) micropore formation through reaction between carbon and ammonia, and (iii) completion of active sites in the micropores by reaction of iron with ammonia. Step (ii) is the slowest. Moreover, the microporous surface per mass of catalyst controls the macroscopic activity when enough nitrogen atoms are incorporated in the structure of the carbon support. These facts should help in determining the structure of the active sites and in identifying methods to increase the site density of such catalysts.     

碳基非贵金属氧还原电催化剂的活性位结构研究进展

以热解型Fe/N/C为代表的碳基非贵金属材料被认为是当前最具潜力替代铂的非贵金属氧还原催化剂,其综合性能的进一步突破,对于推动质子交换膜燃料电池商业化应用具有重要意义。对热解型Fe/N/C催化剂活性位结构的深入认识是实现催化剂高活性位密度和高稳定性理性设计的关键。本文总结了热解型Fe/N/C活性位的研究进展,重点介绍了非晶态铁氮配位活性中心、氮掺杂和碳缺陷三类活性位构型。由于热解型Fe/N/C是非均相的,结构非常复杂,导致在活性位认识上还存在诸多争议,本文总结阐述了活性位结构的不同观点。最后,我们展望了Fe/N/C催化剂活性位研究的未来方向。     

Colloidal systems containing free radical‐forming particles and composites on their basis

Controlled surface activity and reactivity of new carbon‐chain functional surface‐active oligoperoxides (FSAP) and derived metal complexes (OMC) with side and end di‐tertiary and tert‐alkyl (aryl) peroxidic, respectively, and other active functional groups cause the possibility of their tailored utilization as emulsifiers, surface‐active initiators and modifiers of the phase boundaries of liquid, solid and mixed phases in different colloidal systems in a wide temperature range. New materials can be developed such as water and hydrocarbon polymer dispersions, artificial water dispersions of unsaturated polyesters and alkyd resins, polymer/polymeric blends, active glass and carbon fibers, dispersed fillers, reinfourced and filled polymer composites with the definite special properties. Methods for the obtaining and the application of these materials are described.     

A method for the analysis of sucralose with electrospray LC/MS in recipient waters and in sewage effluent subjected to tertiary treatment technologies

A method for the analysis of the artificial sweetener sucralose in sewage water and recipient water was developed. Extraction and clean up was performed with solid-phase extraction utilising Oasis HLB columns. Detection was made by liquid chromatography electrospray mass spectrometry (LC/MS). The triple-quadrupole mass spectrometer was operated in multiple reaction monitoring (MRM) mode. However, ‘pseudo MRM’ was used, a technique where the two quadrupoles monitor the same m/z. The sodium adduct of sucralose was used for quantification, since lower detection limits were obtained as compared to the sucralose quasi-molecular ion in negative ion mode. The two ions with highest intensity in the chlorine isotope pattern were monitored. The reduction of matrix effects with this approach is discussed. The method limit of quantification (MLOQ) for sewage water was 0.2?µg?L^?1, whereas for recipient water MLOQ was 0.02?µg?L^?1. The method was used to analyse effluent samples from an experimental sewage treatment plant (STP) to assess the efficiency of tertiary treatment techniques for removal of sucralose. Filtration through activated carbon was shown to be efficient, while ozonation, advanced oxidation techniques and membrane bioreactors were less efficient. Analyses of receiving waters showed low dilution of sucralose emitted from the STPs.     

Evaluation of the mixed aggregate method as an alternative to the bismuth active substances and cobalt thiocyanate active substances procedures for the determination of nonionic surfactants in raw and treated sewage

The mixed aggregate (MA) method was evaluated for the routine determination of total ethoxylated nonionic surfactants in municipal raw and treated sewage. Nonionics in wastewater samples were enriched with a C8 solid-phase extraction cartridge, eluted with ethyl acetate-methanol, and separated from interferences with stacked strong anionic (quaternary ammonium form) and cationic (benzenesulfonic acid form) exchange columns. Sample extracts were evaporated to dryness and redissolved in distilled water. The total amount of ethoxylates, on a weight basis, was determined by measuring the critical micelle concentration of a mixed micelle made up of ethoxylates and the anionic surfactant sodium dodecyl sulfate, used as the reagent. The dye Coomassie Brilliant Blue G was used as a photometric probe. The minimum amount of ethoxylate required for a single determination was 1 microg. For raw sewage samples, mean recoveries and standard deviations were 98 +/- 6 and 98 +/- 4% at fortification levels of 0.3 and 0.6 microg/mL, respectively. For treated sewage samples, mean recoveries and standard deviations were 95 +/- 2 and 100 +/- 2% at fortification levels of 0.03 and 0.06 microg/mL, respectively. The MA method and the classical bismuth active substances and cobalt thiocyanate active substances procedures were compared. The former offers some significant advantages over the classical procedures in terms of sensitivity, selectivity, precision, simplicity, and rapidity; the type of response is independent of both the molecular weight and the chain length of the surfactant.     

Laser-assisted synthesis of cobalt@N-doped carbon nanotubes decorated channels and pillars of wafer-sized silicon as highly efficient three-dimensional solar evaporator

The Co@NCNTs/Si pillars with channels is assemble to a suitable pure water gathering device, which is applied in seawater desalination and sewage purification to produce pure water by utilizing solar energy. High-efficiency utilization of solar energy to generate water vapor is popular, recyclable, and environmentally friendly for seawater desalination and sewage purification, helping to alleviate the global water shortage crisis. Here, we report an efficient and simple method to prepare a three-dimensional (3D) evaporator for steam generation by harnessing the power of the sun. This evaporation is composed of one-dimensional (1D) cobalt embedded and nitrogen doped carbon nanotubes (Co@NCNTs) and 3D silicon pillars array structure (Si pillars). The Co@NCNTs/Si pillars shows a wide light absorption range provided by carbon nanotubes and a long light absorption path because of the silicon pillars. The surface temperature of the sample rises rapidly in 1.5 min and exceed 80 °C under solar illumination of one sun. The water evaporation can be high as 1.21 kg m⁻² h⁻¹ under one sun irradiation (1 kW/m²) with the energy efficiency up to 82.4%. This scalable Co@NCNTs/Si pillars can prepare pure water from seawater and sewage, where the removal rate of ions in seawater and pollutants in sewage is similar to 100%. Based on our research, this multistage three-dimensional structure is a simple and efficient novel photothermal material for extensive seawater desalination and sewage purification.     

A Flexible Electrode Based on Iron Phosphide Nanotubes for Overall Water Splitting

The design of cheap and efficient water splitting systems for sustainable hydrogen production has attracted increasing attention. A flexible electrode, based on carbon cloth substrate and iron phosphide nanotubes coated with an iron oxide/phosphate layer, is shown to catalyze overall water splitting. The as‐prepared flexible electrode demonstrates remarkable electrocatalytic activity for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) at modest overpotentials. The surface iron oxide/phosphate, which is formed in situ, is proposed to improve the HER activity by facilitating the water‐dissociation step and serves directly as the catalytically‐active component for the OER process.