高密度柱状聚合物刷的合成

通过铜催化的叠氮-炔偶联反应(CuAAC),利用grafting-onto方法合成每个主链重复单元带有多于一条侧链的高接枝密度的柱状聚合物刷.首先,合成了带有缩酮保护的甲基丙烯酸2,2-双羟甲基丙酯单体(bisMPMA),并通过可逆加成-断裂链转移(RAFT)聚合得到窄分子量分布的线形聚合物.在酸性条件下脱去缩酮保护后,以羟基与戊炔酸酐的酯化反应,得到了每个重复单元带有2个炔基的聚合物主链.之后,利用高效的CuAAC反应,将末端带有叠氮基团的聚环氧乙烷(PEO)或聚苯乙烯(PS)侧链接枝到主链上,用核磁共振氢谱(1H-NMR)和体积排阻色谱(SEC)等对聚合物刷的结构进行表征.     

两亲性杂侧链聚合物刷的合成及其乳化功能

报道了一种随机高密度接枝亲水、疏水聚合物侧链的刷形两亲性聚合物.首先,结合可逆加成-断裂链转移(RAFT)聚合和后修饰方法,得到含叠氮侧基的聚甲基丙烯酸缩水甘油酯(PGMA-N3)作为主链;再分别合成端炔基聚苯乙烯(PS)和端炔基聚环氧乙烷(PEO),然后通过铜催化的叠氮-炔环加成反应,将疏水性PS和亲水性PEO同时高效的接到PGMA主链上,制得两亲性杂侧链的聚合物刷.由凝胶渗透色谱(SEC)分析得知,在主链叠氮基团与两侧链总炔基的摩尔投料比为1∶1的条件下,PS和PEO的接枝效率很高,都大于90%.通过调节主链长度和2种侧链的投料比,获得不同组成的聚合物刷.通过等质量的甲苯/水混合体系,考察两亲性聚合物刷的乳化能力,发现主链聚合度为100,PS∶PEO比例为70∶30的聚合物刷表现出最佳的乳化性能.     

两亲性聚合物刷的合成和溶液自组装

结合可控自由基聚合和铜催化的叠氮-炔环加成(Cu AAC)反应,合成了一系列Ab BA型两亲性的聚合物刷.其中A段为亲水性的聚(N,N'-二甲基丙烯酰胺)(PAm);B段为高密度接枝的聚合物刷,其侧链为疏水性的聚苯乙烯(PS).通过核磁氢谱(1H-NMR),凝胶渗透色谱(GPC)表征了聚合物刷的组成及结构,其侧链接枝密度约为100%.研究了亲水链段含量不同的聚合物刷在多种条件下的溶液自组装行为,通过透射电子显微镜(TEM)表征了组装体的形貌.在相同的组装条件下,两亲性聚合物刷中亲水链段含量较高时(5%),组装体形貌为球形,而随着亲水链段含量降低,形貌向片层状胶束和囊泡转变.对聚合物刷PAm195-b-(PA-g-PS67)153-b-PAm195的自组装研究表明,提高初始浓度促使组装体形貌向片层和囊泡转变;采用与PS的溶度参数相近的良溶剂,可提高胶束核的活动性,组装体更容易形成囊泡(热力学稳定态);而采用与PS的溶度参数相差大的选择性溶剂时,组装体倾向于聚集形成大尺寸的囊泡.     

三嵌段刷状共聚物的合成及溶液组装制备多孔纳米粒子

结合可控自由基聚合和铜催化的叠氮-炔环加成(Cu AAC)反应,合成了coil-brush-coil型三嵌段刷状共聚物.其中coil段为亲水性的聚(N,N′-二甲基丙烯酰胺)(PDMA),brush段为高密度接枝V形侧链的疏水性聚丙烯酸酯.由于其两亲性特征及刷状拓扑结构所赋予的主链刚性,该嵌段共聚物在选择性溶剂甲醇和乙醇中可分别自组装得到片状胶束和囊泡.刷状嵌段的V形侧链包含聚苯乙烯(PS)和聚左旋丙交酯(PLLA)2条链,它们在胶束(或囊泡)组装体的核(或壁)区发生微相分离得到有序的柱状相分离形貌.将离散柱状PLLA相水解,即可得到核或壁具有多孔结构的片状胶束或囊泡.     

含偶氮苯侧链分子刷聚合物的合成及其光响应自组装

分子刷聚合物伸展的高分子主链、高密度的侧链和较低的侧链空间缠结,使其展现出独特的流变学、力学性能和特殊的分子聚集状态,在纳米技术、表面科学等领域有着广泛的应用前景.基于同时含有2-羰基溴与炔基基团的大分子试剂聚2-((2-溴代丙酰氧基)甲基)丙烯酸丙炔酯,引发偶氮苯丙烯酸酯单体的原子转移自由基聚合(ATRP)与叠氮功能化的巴比妥酸衍生物的点击反应,合成了新型含偶氮苯侧链的分子刷聚合物聚丙烯酸酯-g-聚(6-(4-丁基-4′-氧偶氮苯)正己基丙烯酸酯)/巴比妥酸(PA-g-PAzo/Bar),研究了其在溶液中的自组装和光响应性行为.随着分子刷聚合物浓度的增加,聚集体由柱状胶束向复合胶束转变.由于光响应性偶氮苯侧链的存在,在紫外光的照射下偶氮苯生色团发生trans-cis异构化转变,促使柱状胶束融合形成多孔网状聚集体,同时球形复合胶束融合形成珍珠项链状聚集体.     

利用点击化学反应修饰聚氨酯

合成了2,2-丙炔基-1,3-丙二醇(DPPD),将其作为扩链剂引入聚氨酯(PU)主链分子中,获得了一种主链带有炔基的可降解聚氨酯材料,并通过叠氮基团与炔基间的点击化学反应,将模型分子引入到聚氨酯分子链上.1H NMR图谱中δ2.03的峰及红外图谱中2138 cm-1处的峰证实炔基引入了聚氨酯分子链;1H NMR图谱δ7.91处的峰表明采用点击化学方法将苄基叠氮分子引入了聚氨酯分子主链.当扩链系数分别为1,0.7和1[70%DPPD+30%1,3-丙二醇(PDO)]时,最终产物中炔基含量分别为0.396,0.235和0.197 mmol/g.细胞毒性实验结果表明,炔基的引入对细胞活性没有影响.     

接枝树形支化分子双亲性嵌段共聚肽的合成及性能研究

分别以叠氮丙胺和丙炔胺为引发剂,采用氨基酸环内酸酐开环聚合法(NCA-ROP),引发L-谷氨酸-γ-苄酯-N-羧基-环内酸酐和L-谷氨酸-γ-氯乙醇酯-N-羧基-环内酸酐聚合得到链端基为叠氮基的聚(L-谷氨酸-γ-苄酯)(PBLG)和链端基为炔基的聚(L-谷氨酸-γ-氯乙醇酯)(PCELG)均聚物.联合点击化学法(click chemistry)制备了一系列聚(L-谷氨酸-γ-苄酯)-b-聚(L-谷氨酸-γ-氯乙醇酯)(PBLG-b-PCELG),再通过对嵌段共聚物侧基氯进行化学修饰,将二代的甲基烷氧醚类亲水性树形枝化分子(G2)接枝到侧链上,形成一系列树形支化分子接枝聚肽双亲性嵌段共聚物,通过核磁(NMR)、红外光谱(IR)和凝胶渗透色谱(GPC)对其化学结构进行了表征,并采用紫外-可见光谱(UV-Vis)研究了聚合物结构及其溶液浓度对其温敏行为的影响规律.     

四硫富瓦烯三氮唑衍生物的合成及应用研究进展

四硫富瓦烯是一类重要的电子供体化合物,在分子导体和超分子化学领域引起广泛关注.主要介绍Cu(I)催化的叠氮和炔基的环加成反应(Cu AAC)在合成四硫富瓦烯三氮唑衍生物方面的应用进展,主要涉及含端基叠氮的四硫富瓦烯化合物和含端基炔的反应底物反应以及含端基炔的四硫富瓦烯化合物和含端基叠氮的反应底物反应两类.同时,对利用Cu AAC点击反应合成的含三氮唑功能基的四硫富瓦烯衍生物在分子识别、分子组装以及分子光电和光伏器件等光电功能材料领域的应用进展进行综述.     

两亲性全季铵盐超支化聚合物的设计与合成及主-客体超分子着色应用研究

采用高效的巯基-炔点击化学与Menschutkin季铵化反应,合成了一种带有1个叠氮基、2个炔基和2个季铵盐基团的AB2型季铵盐单体,通过核磁共振、红外光谱、质谱等方法对单体结构进行了确认.将所得单体进行点击聚合,得到全季铵盐超支化聚合物,并用端叠氮基的长链烷烃封端,得到核亲水-壳憎水的两亲性超支化聚季铵盐.研究所得两亲性超支化聚合物对染料的装载性能,结果表明所合成的带正电荷两亲性聚合物对多种带负电荷的水性染料装载效果好,平均相转移率高达95%.进一步将装载染料的主-客体超分子复合物用于聚合物制品着色,发现其对SBS及PMMA等聚合物有很好的着色效果,着色均匀且不掉色,着色的膜色泽鲜艳透明.     

基于炔类单体的点击聚合制备超支化聚合物

超支化聚合物由于其独特的树枝状结构和物理化学性质,已经得到了广泛关注及应用.而基于炔类单体的点击聚合作为一类简单、高效的聚合反应已被广泛用于超支化聚合物的制备.本文对近5年利用叠氮-炔和巯基-炔点击聚合制备超支化聚合物的工作进行了简要综述.其中,Cu(I)催化的叠氮-炔点击聚合可制备1?4-立构规整的超支化聚三唑;Ru(II)催化的叠氮-炔点击聚合可制备1?5-立构规整的超支化聚三唑;活化的炔类单体和叠氮单体的无金属催化点击聚合可得到1?4-异构体含量高(高达91.7%)的超支化聚合物;而光引发?热引发及自发的巯基-炔点击聚合可制备含硫的超支化聚合物.此外,对所制备的超支化聚合物的功能和应用进行了简单介绍,最后还简单讨论了点击聚合制备超支化聚合物方面的可能发展方向.     

SYNTHESIS AND CHARACTERIZATION OF NOVEL BIPOLAR PPV-BASED COPOLYMER CONTAINING TRIAZOLE AND CARBAZOLE UNITS*

Two new blue light-emitting PPV-based conjugated copolymers containing both an electron-withdrawing unit(triazole-TAZ) and electron-rich moieties (carbazole-CAR and bicarbazole-BCAR were prepared by Wittig condensationpolymerization between the triazole diphosphonium salt and the corresponding dialdehyde monomers. Their structures andproperties were characterized by FT-IR, TGA, DSC, UV-Vis, PL spectroscopy and electrochemical measurements. Theresulting copolymers are soluble in common organic solvents and thermally stable with a T_g of 147℃ for TAZ-CAR-PPVand of 157℃ for TAZ-BCAR-PPV. The maximum photoluminescence wavelengths of TAZ-CAR-PPV and TAZ-BCAR-PPV film appear at 460 nm and 480 nm, respectively. Cyclic voltammetry measurement demonstrates that TAZ-BCAR-PPVhas good electrochemical reversibility, while TAZ-CAR-PPV exhibits the irreversible redox process. The triazole unit wasfound to be an effective π-conjugation interrupter and can play the rigid spacer role in determining the emission colour ofthe resulting copolymer.     

Novel Bipolar Conjugated Polymer Containing Both Triphenylamine and Oxadizole Units

A novel bipolar conjugated polymer containing triphenylamine and 1,3,4-oxadiazole units was synthesized by Suzuki reaction.Its structure and properties were characterized by NMR,IR,UV-Vis,PL spectroscopy and electrochemical measurement. The photoluminescent spectroscopy and cyclic voltammograms measurement demonstrated that the resulting polymer shows blue emission (477 nm) and possesses both electron and hole-transporting property.     

导电高分子材料的应用和进展

论述了复合型及结构型导电高分子材料的导电机理、应用和研究进展。     

Orthogonal surface-grafted polymer gradients: A versatile combinatorial platform

Orthogonal polymer brush gradients are assemblies of surface-anchored macromolecules, in which two material properties of the grafted chains (e.g., grafting density, molecular weight) vary independently in orthogonal directions. Here, we describe the formation and applications of two such orthogonal assemblies, involving: (1) molecular weight and grafting density (MW/σ) gradients of a given polymer and (2) molecular weight gradients (MW1/MW2), of two different polymers. Each point on orthogonal gradient substrate represents a unique combination of the two surface properties being varied, thus facilitating systematic investigation of a phenomenon that depends on the two said properties. We illustrate this point by employing orthogonal structures to study systematically: (1) formation of polymer brush-nanoparticle composite assemblies, (2) protein adsorption and cell adhesion, and (3) chain conformations in tethered diblock copolymers exposed to selective solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3384–3394, 2005     

共轭聚合物材料及电致发光器件

共轭聚合物是一种极有应用前景的有机半导体材料，本文综述其研究进展，包括典型共轭聚合物材料PPV、PT、PF等及PPP的工作原理，发展前景和存在的问题。     

含氟硅聚合物的合成及应用

含氟硅聚合物作为一种新型材料,有机结合了含氟聚合物和含硅聚合物的优点,成为材料领域研究开发的热点之一。本文综述了含氟硅聚合物合成的研究进展,介绍了其应用情况。     

聚甲基丙烯酸三乙基锡酯的溶度参数和溶液性质研究

本文研究了聚甲基丙烯酸三乙基锡酯(PTETM)在二十五种溶剂中的溶解性能。测定了PTETM试样在不同溶剂中的特性粘数,估算了PTETM的三维溶度参数为:δ=18.8(J/cm~3)~(1/2);δ_d=16.8(J/cm~3)~(1/2);δ_p=6.28(J/cm~3)~(1/2);δ_h=5.73(J/cm~3)~(1/2)。并就聚合物中锡原子上的取代基对其溶解性能的影响进行了讨论。作者还订定了PTETM在四氢呋喃溶液中,25℃时的MHS方程为[η]=2.55×10~(-3)M_w~(0.691);在甲苯溶液中,30℃时的MHS方程为[η]=2.79×10~(-3)M_w~(0.662)。利用Burchard-Stockmayer-Fixman关系,由四氢呋喃体系(25℃)和甲苯体系(30℃)所求得的Flory特征比C_∞=9.4。     

Polymers as drugs—Advances in therapeutic applications of polymer binding agents

Polymer drugs are those in which a polymer agent has a direct therapeutic effect on the body. A major investigated area of polymer drugs is their use as binding agents, or sequestrants, which can neutralize or remove undesired components from the body. By taking advantage of the unique properties of crosslinked, insoluble polymers, new polymer drugs continue to be developed for oral use, acting in the gastrointestinal tract and excreted in the feces. Soluble polymer binders may be administered by a variety of routes and act at diverse sites of therapeutic action. This article reviews the properties of polymer drugs, particularly sequestrants, with an emphasis on recent advances in polymer properties which may enhance the utility of this class of drugs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3146–3157     

导电性聚西佛碱的研究：Ⅰ含硫聚西佛碱的合成,性能及表征

采用对氯苯甲醛和联苯二胺为原料,合成了4,4′-二氯代苄叉联苯胺,发现该化合物具有热致液晶性。利用所合成的二氯代化合物与硫化钠在醋酸锂催化下缩取得得到了含硫聚西佛碱探讨了高分子量含硫聚西佛碱的合成方法。测出该含硫聚西佛碱具有3.4×10~(-11)S/cm本征导电率。使用红外光谱、元素分析等方法表征了所合成的聚合物。     

Synthesis and fabrication of highly functionalized Jeffamine antimicrobial polymeric coating

A simple, robust, and eco‐friendly technique for the fabrication of functionalized Jeffamine polymer in an aqueous medium is developed. The polymer is prepared by post polymerization modification of Jeffamine ED‐2003 of molecular weight 2000. The structure of the modified polymer was studied in detail using FTIR and NMR (¹H and ¹³C NMR) spectroscopic methods. The thermal properties and degradation of the polymer were examined by DSC and TGA techniques. The polymer exhibited glass transition temperature (T_g) at 115°C. The functionalized polymeric compound showed good antimicrobial activity against gram‐negative bacterium Escherichia coli, a tubercular variant Mycobacterium smegmatis, and gram‐positive bacterium Staphylococcus aureus with a zone of inhibition of 6 to 12, 9, and 5 to 9 mm diameter, respectively. The compound also showed good activity against the fungus, Candida albicans, with a zone of inhibition of 6 to 11 mm diameter. The morphology of the polymer films and interaction of the microbes with functionalized Jeffamine polymer were investigated by using scanning electron microscopy (SEM).