Dithienosilole–phenylquinoxaline‐based copolymers with A‐D‐A‐D and A‐D structures for polymer solar cells

Two copolymers having D‐A‐D‐A ( P1 ) and D‐A ( P2 ) structures with quinoxaline acceptor unit and dithienosilole donor unit were synthesized and their optical and electrochemical (both experimental and theoretical) properties were investigated. The optical properties showed that these copolymers P1 and P2 exhibit optical bandgaps of 1.54 and 1.62 eV, respectively, with broader absorption profiles extending up to 800 nm and 770 nm, respectively. The electrochemical investigation of these two copolymers indicates that they exhibit suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels for efficient exciton dissociation and high open circuit voltage in the resultant polymer solar cells (PSCs). These copolymers were used as donors along with the PC₇₁BM as acceptor for the fabrication of solution processed bulk heterojunction PSCs. The optimized P1 :PC₇₁BM and P2 :PC₇₁BM active layers treated with solvent vapor treatment showed overall power conversion efficiency (PCE) of 7.16% and 6.57%, respectively. The higher PCE of P1 ‐based device as compared to P2 might be attributed to higher crystallinity of P1 and good hole mobility resulting more balanced charge transport. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 376–386     

Synthesis and photovoltaic properties of copolymers based on bithiophene and bithiazole

Three simple structured D‐A copolymers, PBTBTz‐1 , PBTBTz‐2 , and PBTBTz‐3 , containing bithiophene (BT) donor unit and bithiazole (BTz) acceptor unit with different alkyl chain length were synthesized by the Pd‐catalyzed Stille‐coupling method. The copolymers were characterized by thermogravimetric analysis, UV–vis absorption, electrochemical cyclic voltammetry, and photovoltaic measurements. The results indicate that the introduction of BTz unit to the polythiophene main chain effectively decreases highest occupied molecular orbital levels of the copolymers and increases the open circuit voltage (V_oc) of polymer solar cells (PSCs) based on the copolymers as donor, and the alkyl chain length influences the photovoltaic properties of the polymers significantly. The PSCs based on PBTBTz‐2 and PBTBTz‐3 show higher V_oc up to 0.77 and 0.81 V, respectively. The power conversion efficiency of the PSC based on PBTBTz‐2 :PC₇₀BM = 1:1(w/w) reached 2.58% with short circuit current of 8.70 mA/cm², under the illumination of AM1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Low band‐gap modulation of isoindigo‐based copolymers toward high open‐circuit voltage of polymer solar cells

Designing low band‐gap‐conjugated polymers coupled with low HOMO levels attracts great attention in the field of polymer solar cells (PSCs). By using donor–acceptor (D‐A) copolymerization strategy, we designed and synthesized a series of low band‐gap copolymers with deep HOMO levels via introducing an isoindigo (IID) acceptor unit in the copolymers with the donor unit of fluorene (F) (PIID‐F), carbazole (Cz) (PIID‐Cz), thiophene (Th) (PIID‐Th), dithiophene (DTh) (PIID‐DTh), or dithienosilole (DTS) (PIID‐DTS). The HOMO level of the copolymers, measured by electrochemical cyclic voltammetry, varies from ?5.3 eV to ?5.8 eV, depending on different donor units in the copolymers. However, the LUMO levels of all the copolymers are fixed at about ?3.6 eV, which is mainly determined by IID acceptor unit due to its strong electron‐withdrawing ability. The new results will provide an effect help in designing IID based molecular structures. Among the copolymers, PIID‐DTS has a low band gap of 1.58 eV and possesses a low‐lying HOMO energy level of ?5.33 eV. The PSCs based on PIID‐DTS as donor and PC₇₀BM as acceptor exhibited a high open‐circuit voltage (V_oc) of 0.93 V and a primary power conversion efficiency of 2.45%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3477–3485     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677     

NON-LINEAR LEAST SQUARE CURVE FITTING OF COPOLYMERIZATION MODELS TO THE ALTERNATING TRIAD FRACTION OF COPOLYMERS OF STYRENE AND CITRACONIC ANHYDRIDE,AND COPOLYMERS OF STYRENE AND MALEIC ANHYDRIDE PREPARED IN N,N-DIMETHYLFORMAMIDE

Copolymers of styrene (ST) and citraconic anhydride (α-methylmaleic anhydride) (CA) were prepared in a very polar solvent, N,N-dimethylformamide (DMF), at 50.0°C with AIBN. The monomer unit triad fractions were determined by ¹³C NMR in acetone-d ₆ solution. Non linear least square (NLLS) curve fitting was performed for the copolymerization models of the terminal model, the penultimate unit effect model, the complex participation model, the complex dissociation model, and the so-called comppen model. The theoretical equations for the ST-centered alternating triad mole fraction were fitted by NLLS minimization routine to the triad fraction data of the ST-CA copolymers and that of the ST-maleic anhydride (MA) copolymers prepared in identical polymerization conditions. It was found that for rigidly alternating copolymers of ST-MA, the difference among the copolymerization models disappeared and all models merged together. The difference among the copolymerization models were somewhat more apparent for less alternating copolymers of ST-CA copolymers. The sum of squares values indicated that the copolymerization models, which involved some complex participation, fit the data better with the comppen model. This was a combination of a complex participation and penultimate unit effects, which performed best.     

D–π–A polysulfones for blue electroluminescence

Donor–π–acceptor type fluorene‐based copolymers with a sulfone unit were designed and synthesized for application in efficient pure‐blue light emitting. The electroluminescence behaviors of these copolymers were investigated by fabricating light‐emitting diodes and electrochemical cell devices. The former device little functioned but the latter worked well. The electrochemical cell devices having a configuration of ITO/PEDOT:PSS/copolymer:ionic liquid/Al exhibited purplish blue electroluminescence with an emission maximum at 434 nm (CIE coordinates (x, y) = (0.17, 0.10)) measured at 7 V. The initial positive scan of the D–π–A polysulfone based light emitting electrochemical cell with a sweep rate of 0.1 V s^?1 afforded a maximum luminance of 1080 cd m^?2 with a current efficiency of 1.96 cd A^?1 at an operating voltage of 12.5 V. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3454–3461     

RING OPENING COPOLYMERIZATION OF SUCCINIC ANHYDRIDE-ETHYLENE OXIDE BY Al(Ⅲ) ORGANOMETALLIC CATALYSTS

Ring opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO)was successfully carried out by using a series of aluminum-based catalyst in 1,4-dioxane at62±2℃. The results showed that in-situ AlR_3-H_2O (R=ethyl, iso-butyl) catalysts gavehigher molecular weight (M_w～10~4), while Al(OR)_3 catalysts gave the higher alternatingcopolymer structure with slightly lower molecular weight. The in-situ AlR_3-H_2O systemshave been evaluated in more detail for the reaction which showed the optimum H_2O/Almolar ratio to be 0.5. The copolymers with different composition (F_(SA)/F_(EO)= 36/64to 45/55 mol/mol) were synthesized by using different monomer feed ratio. The melt-ing point (T_m), glass transition temperature (T_g) and enthalpy of fusion (ΔH_f) of thesecopolymers are depended on the copolymer composition and in the range of 87～102℃,-12～-18℃, and 37～66J/g, respectively. The second heating scan of DSC also in-dicated that the higher alternating copolymer was more easily recrystallized. The onsetdecomposition temperature was more than 300℃ under nitrogen and influenced by thecopolymer composition.     

Arsole‐Containing π‐Conjugated Polymer by the Post‐Element‐Transformation Technique

A synthetic method to obtain an arsole‐containing π‐conjugated polymer by the post‐transformation of the organotitanium polymer titanacyclopentadiene‐2,5‐diyl unit with an arsenic‐containing building block is described. The UV/Vis absorption maximum and onset of the polymer were observed at 517 nm and 612 nm, respectively. The polymer exhibits orange photoluminescence with an emission maximum (E_max) of 600 nm and the quantum yield (Φ) of 0.05. The polymer proved to exhibit a quasi‐reversible redox behavior in its cyclic voltammetric (CV) analysis. The energy levels of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were estimated to be ?5.43 and ?3.24 eV, respectively, from the onsets for oxidation and reduction signals in the CV analysis. Further chemical modification of the arsole unit in the π‐conjugated polymer by complexation of gold(I) chloride occurred smoothly resulting in the bathochromic shift of the UV/Vis absorption and lowering of the LUMO energy level.     

Synthesis and characterization of new π‐conjugated polymers containing 1,8‐naphthyridine in the main chain: Role of the 1,8‐naphthyridine unit in π‐conjugated polymers

Alternating π‐conjugated copolymers of 1,8‐naphthyridine‐2,6‐diyl ( 1,8‐Nap ) with 9,9‐dioctylfluorene‐2,7‐diyl ( P(Flu‐Ph‐1,8‐Nap) ) and 2,5‐didodecyloxy‐1,4‐phenylene ( P(ROPh‐Ph‐1,8‐Nap) ) have been synthesized by Pd‐catalyzed organometallic polycondensation. The copolymers showed UV‐vis absorption peaks at around 390 nm in o‐dichlorobenzene. The polymers were photoluminescent both in o‐dichlorobenzene and in the solid state. In o‐dichlorobenzene, the emission peaks of P(Flu‐Ph‐1,8‐Nap) and P(ROPh‐Ph‐1.,8‐Nap) appeared at λ_EM = 440 and 471 nm, with quantum yields of 87% and 66%, respectively. Electrochemical data revealed that 1,8‐Nap behaved as a typical electron‐accepting unit. When P(Flu‐Ph‐1,8‐Nap) was treated with 10‐camphorsulfonic acid, the emission peak shifted to λ_EM = 598 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and optical and electrochemical properties of copolymers consisting of 9,9‐dihexylfluorene and aromatic triazole chromophores

Aromatic triazole chromophores were incorporated into polyfluorene in an attempt to increase electron affinity, to promote emission efficiency, and to diminish excimer formation. Poly(9,9‐dihexylfluorene) ( P1 ) and new copolymers with aromatic triazoles ( P2 – P4 ) were prepared by Suzuki coupling polymerization. In P2 , the aromatic triazole (3.8 mol %) was attached exclusively as terminal groups, whereas P3 and P4 were main‐chain copolymers containing 3.9 and 10.3 mol % aromatic triazole chromophores, respectively. The copolymers were soluble in common organic solvents and showed high decomposition temperatures (437–458 °C). The twisted structure between the triazole and fluorene increased the emission efficiency and effectively prevented excimer formation in P2 – P4 . After the introduction of the triazole units, the absorption spectra showed a blueshift (from 388 to 381 nm in chloroform) due to confined conjugation, but the photoluminescence spectra remained almost the same (417–418 nm); this was attributed to oligofluorene segments. No emission of triazole fluorophores was observed because of efficient energy transfer from the triazole to oligofluorene segments. However, incomplete energy transfer was observed in CH₃COOH. The optical stability upon thermal annealing was also improved by the incorporation of aromatic triazole segments. From cyclic voltammetry results, P2 – P4 , containing triazole groups, showed greater electron affinity (lowest unoccupied molecular orbital level = ?2.67 to ?2.71 eV) than P1 (?2.52 eV). Electroluminescence devices of P1 – P4 all exhibited excimer emissions (483–521 nm), which could also be diminished by the introduction of aromatic triazole chromophores. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 136–146, 2007     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

Random multiacceptor poly(2,7‐carbazole) derivatives containing the pentacyclic lactam acceptor unit TPTI for bulk heterojunction solar cells

Here, a family of donor/acceptor (D/A) alternating copolymers and random two‐acceptor and three‐acceptor copolymers were synthesized via Suzuki polymerization based on heptadecan‐9‐yl substituted carbazole as a donor and 4,7‐Bis(5‐bromothiophene‐2‐yl)benzo[c][1,2,5]thiadiazole (DTBT), 2,5‐diethylhexyl‐3,6‐bis(5‐bromothiophene‐2‐yl)pyrrolo[3,4‐c]‐pyrrole‐1,4‐dione (DPP) and 2,8‐dibromo‐4,10‐bis(2‐ethylhexyl)thieno[2′,3′:5,6] pyrido[3,4‐g]thieno[3,2‐c]isoquinoline‐5,11(4H,10H)‐dione (TPTI) as acceptors. For the first time, a relatively new electron‐deficient TPTI unit was used as an acceptor in carbazole‐based conjugated polymers. Introduction of the electron‐deficient TPTI unit into the polymer backbone increased the open‐circuit voltage (V_oc) of the resulting polymer solar cells up to 0.96 V. PCTPTI and PCDTBT‐TPTI exhibited external quantum efficiencies (EQE) up to 75%. All random two‐acceptor copolymers showed broadened absorption profiles compared to the D/A alternating analogues. In order to further improve the light absorption, a random three‐acceptor copolymer was synthesized for the first time, resulting in the broadest absorption in the range of 350–750 nm. Highest occupied molecular orbital (HOMO) energies and V_oc values of the resulting polymers could be successfully tuned by introducing different monomer units into the polymer backbone in different ratios. These results indicate that TPTI is a promising acceptor unit for conjugated polymers and that the random copolymer approach is a successful tool for fine tuning of polymer properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2781–2786     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249     

Enhanced Electrocatalytic Activity of a Zinc Porphyrin for CO2 Reduction: Cooperative Effects of Triazole Units in the Second Coordination Sphere

The control of the second coordination sphere in a coordination complex plays an important role in improving catalytic efficiency. Herein, we report a zinc porphyrin complex ZnPor8T with multiple flexible triazole units comprising the second coordination sphere, as an electrocatalyst for the highly selective electrochemical reduction of carbon dioxide (CO₂) to carbon monoxide (CO). This electrocatalyst converted CO₂ to CO with a Faradaic efficiency of 99 % and a current density of −6.2 mA cm⁻² at −2.4 V vs. Fc/Fc⁺ in N,N-dimethylformamide using water as the proton source. Structure-function relationship studies were carried out on ZnPor8T analogs containing different numbers of triazole units and distinct triazole geometries; these unveiled that the triazole units function cooperatively to stabilize the CO₂-catalyst adduct in order to facilitate intramolecular proton transfer. Our findings demonstrate that incorporating triazole units that function in a cooperative manner is a versatile strategy to enhance the activity of electrocatalytic CO₂ conversion.     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009     

Novel mesogen‐jacketed poly(p‐phenylenevinylene) derivatives bearing oxadiazole pendants: Design,synthesis, and optoelectronic properties

1,3,4‐oxadiazole moieties were laterally linked to the phenyl rings via a short ? OCH₂ spacer and a series of novel poly(p‐phenylenevinylene) derivatives have been successfully synthesized through Horner–Witting–Emmons coupling reaction. The structures and properties of the monomers and the resulting conjugated polymers were characterized by nuclear magnetic resonance spectroscope, Fourier transform infrared, elemental analysis, gel permeation chromatography, thermogravimetric analysis, UV–vis absorption (UV) spectroscopy, photoluminescence spectroscopy and cyclic voltammetry. The UV spectra at solution state was similar to what's observed at film state while the PL spectra at film state had a red shift from 19 to 28 nm compared with the results at solution state, which implied that the unique bulky jacketed structure containing oxadiazole unit of these copolymers could effectively suppress π‐stacking/aggregation. LUMO levels of these polymers varied from ?3.44 to ?3.63 eV with increasing content of oxadiazole units, which facilitated electron injection. PLEDs with the configuration of ITO/PEDOT/Polymer/TPBI (15 nm)/LiF (1 nm)/Al (100 nm) were fabricated, which emit a yellowish green light around 540 and 570 nm with a maximum brightness of 1074.7 cd/m² and luminous efficiency of 0.108 cd/A. The introduction of the unique bulky OXD unit into PPVs at a low molar content largely improved the electroluminescence properties of PPV. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7173–7186, 2008     

Donor–acceptor copolymers based on phenanthrene as electron‐donating unit: Synthesis and photovoltaic performances

Using 9,10‐bis(dodecyloxy)phenanthrene as electron‐donating unit and 4,7‐dithienyl‐5,6‐bis(dodecyloxy)benzothiadiazole, 4,7‐dithienyl‐5,6‐bis(octyloxy)benzoxadiazole, 5,8‐dithienyl‐2,3‐bis(para‐octyloxyphenyl)quinoxaline, and 5,8‐dithienyl‐2,3‐bis(meta‐octyloxyphenyl)quinoxaline as electron‐accepting unit, four D–A copolymers PPA‐DTBT , PPA‐DTBX , PPA‐ p ‐DTQ , and PPA‐ m ‐DTQ , respectively, were successfully synthesized as new polymeric donors for photovoltaic cells. All the alternating copolymers can show two absorption bands, both in solutions and thin films. The optical bandgaps of the polymers are quite close, which are between 1.93 and 2.00 eV. The HOMO and LUMO levels of the polymers are also comparable of ?5.52 ± 0.03 eV and ?3.57 ± 0.03 eV, respectively. Thus, using the dialkoxyphenanthrene as the D unit could afford D–A copolymers with deep‐lying HOMO levels, which would be an important factor to achieve high open‐circuit voltages (V_oc) in bulk‐heterojunction solar cells. With the copolymers as the donor and PC₇₁BM as the acceptor, the resulting solar cells could display good V_oc between 0.86 and 0.88 V. Among the four copolymers, PPA‐DTBT containing the dialkoxybenzothiadiazole unit showed the best power conversion efficiency of 3.03% because of its relatively higher hole mobility and better phase separation. The results suggest that dialkoxyphenanthrene is a valuable electron‐donating unit in the constructions of D–A copolymers for efficient solar cells with high V_oc. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4966–4974     

Novel low‐bandgap oligothiophene‐based donor‐acceptor alternating conjugated copolymers: Synthesis,properties, and photovoltaic applications

A series of novel soluble donor‐acceptor low‐bandgap‐conjugated polymers consisting of different oligothiophene (OTh) coupled to electron‐accepting moiety 2‐pyran‐4‐ylidenemalononitrile (PM)‐based unit were synthesized by Stille or Suzuki coupling polymerization. The combination of electron‐accepting PM building block with varied OTh_n (the number of thiophene unit increases from 3 to 5) results in enhanced π–π stacking in solid state and intramolecular charge transfer (ICT) transition, which lead to an extension of the absorption spectra of the copolymers. Cyclic voltammetry measurements and molecular orbital distribution calculations indicate that the highest occupied molecular orbitals (HOMO) energy levels could be fine‐tuned by changing the number of thiophene units of the copolymers, and the resulting copolymers possessed relatively low HOMO energy levels promising good air stability and high‐open circuit voltage (V_oc) for photovoltaic application. Bulk heterojunction photovoltaic devices were fabricated by using the copolymers as donors and (6,6)‐phenyl C₆₁‐butyric acid methyl ester as acceptor. It was found that the highest V_oc reached 0.94 V, and the short circuit currents (J_sc) were improved from 1.78 to 2.54 mA/cm², though the power conversion efficiencies of the devices were measured between 0.61 and 0.99% under simulated AM 1.5 solar irradiation of 100 mW/cm², which indicated that this series copolymers can be promising candidates for the photovoltaic applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2765–2776, 2010     

Synthesis and characterization of fluorene and cyclopentadithiophene‐based copolymers exhibiting broad absorption for photovoltaic devices

In this study, two low bandgap copolymers composed of fluorene (Fl), cyclopentadithiophene (CDT), and 4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole (DBT) were synthesized, and their optical, electrochemical, and photovoltaic (PV) characteristics were investigated for applications in PV devices. The feed ratio of the Fl and CDT moieties was modulated to tune the electronic structures and resulting optical properties of the polymers. In the copolymeric structures, the Fl‐CDT unit absorbs the short‐wavelength UV/vis regions, and the CDT‐DBT (or Fl‐DBT) unit with strong intramolecular charge transfer characteristics covers the long‐wavelength visible regions. P1 exhibited a wide UV absorption spectrum covering the UV and entire visible region in the range of 300–800 nm, and P2 showed absorption covering from 300 to 700 nm. UV/vis and electrochemical studies confirmed the desirable highest occupied molecular orbital/lowest unoccupied molecular orbital levels of the copolymers with bandgaps of 1.62–1.86 eV, enabling efficient electron transfer and a high open‐circuit voltage when blending them with fullerene derivatives. When the polymers were blended with [6,6]phenyl‐C₆₁‐butyric acid methyl ester, P1 exhibited the best device performance with an open‐circuit voltage of 0.66 V, short‐circuit current of 4.92 mA cm^?2, and power conversion efficiency of 1.13% under Air Mass 1.5 Global (AM 1.5G, 100 mW cm^?2) illumination. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of branching on the thermal properties of novel branched poly(4‐ethyleneoxy benzoate)

Poly(4‐ethyleneoxy benzoate) (PEOB) was synthesized by the self‐condensation of ethyl 4‐(2‐hydroxyethoxy) benzoate (E4HEB) under transesterification conditions. Branched PEOB was prepared by the condensation of E4HEB with an AB₂ monomer, ethyl 3,5‐bis(2‐hydroxyethoxy) benzoate (EBHEB), under similar conditions. Varying amounts of branching (0–50%) were introduced into the linear polymer by changes in the composition of the comonomers in the feed. The solution viscosity of the polymers indicated that they had reasonable molecular weights; the extent of branching in these copolymers was established from their ¹H NMR spectra. Differential scanning calorimetry studies indicated that, as expected, the introduction of branching drastically affected the percent crystallinity of the copolymers (as seen from their ΔH_m, the enthalpy of melting), and when the extent of the incorporation of the AB₂ monomer exceeded 10 mol %, the copolymers were completely amorphous. The melting temperatures of the copolymers decreased with an increase in the branching content, whereas the peak crystallization temperature in quenched (amorphous) samples followed the exactly opposite trend. The glass‐transition temperatures (T_g) of the branched copolymers first decreased at low extents of branching, passed through a minimum, and then increased to attain the T_g of the pure hyperbranched polymer of EBHEB. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 261–268, 2000