可降解聚氨酯丙烯酸酯生物材料的制备及其表征

以端羟基聚丙交酯(PLLA)为软段,六亚甲基二异氰酸酯(HDI)和甲基丙烯酸羟乙酯(HEMA)为硬段聚合得到端基为双键的低聚物,再在UV照射下固化得到可生物降解的聚氨酯丙烯酸酯(PUA)生物组织工程材料.PLLA由1,4-丁二醇引发L-丙交酯(L-LA)开环得到.PLLA和低聚物的组成结构用NMR和GPC进行了表征.对固化聚合物PUA的热性能(DSC和TGA)、力学性能(DMA和拉伸)和亲水性(接触角和溶胀)的研究表明增加PLLA软段会增加材料的Tg,但降低材料的亲水性和交联度.PLLA500-HDI的拉伸强度为6.7 MPa,可以满足生物材料的力学性能要求.通过体外降解实验,发现增加PUA材料的软段,降解速率下降.降解16周后,PLLA500-HDI降解最快,失重15.8%,而PLLA2000-HDI的降解速率最慢,失重5.5%,可能与其微相分离的结构有关.红外(ATR)分析表明降解的PUA膜中N—H的伸缩吸收峰(3364 cm-1)变宽和C O吸收峰变尖锐,说明主链中酯键和氨基甲酸酯键都发生了水解.热失重(TGA)曲线上PLLA500-HDI和PLLA1000-HDI降解后的PUA材料热稳定性下降,而PLLA2000-HDI变化不大.此外,在SEM图中发现降解的PLLA500-HDI膜表面出现裂纹和孔洞,PLLA2000-HDI材料表面也形成相分离结构.细胞实验说明材料支持细胞的黏附,有较好的生物相容性,具有应用于组织工程的潜力.     

不同软段长度PBT-co-PBS-b-PEG嵌段共聚物的合成与表征

用熔融缩聚法合成了一系列具有不同软段长度的聚对苯二甲酸丁二酯 (PBT) co 聚丁二酸丁二酯(PBS) b 聚乙二醇 (PEG)嵌段共聚物 (PTSG) ,考察了PEG分子量 (Mn(PEG) )及PBS摩尔分数 (MPBS)对材料性能的影响 实验表明 ,随Mn(PEG)增加 ,缩聚反应时间延长 ,所得产物分子量均呈较为对称的单峰分布 ,多分散性指数小于 2 0 硬段序列结构分析显示 ,随MPBS 增加 ,PBT平均序列长度减小 ,而PBS平均序列长度增加 ,二者呈无规分布 .受组成及硬段平均序列长度变化影响 ,材料内部呈微观相分离状态 ,DSC曲线上可分别观察到软、硬段熔点及玻璃化转变温度 ;硬段熔点及结晶度随MPBS升高而降低 ,主要是受其平均序列长度变化及共晶作用所致 .材料断裂延伸率及降解速率均随Mn(PEG)及MPBS增加而增加 ,可见提高软段长度及降低硬段结晶度等均能有效改善共聚物高分子链的柔韧性及亲水性 ,赋予共聚物更好的降解性能 .     

聚乙二醇型聚氨酯软硬段对其相变储热性能的影响

以不同分子量的聚乙二醇(PEG)为软段,MDI-BDO为硬段,采用两步法溶液聚合合成一种具有固-固相变储热性能的聚氨酯材料.通过DSC,WAXD等测试手段对体系的软硬段结晶性,微相分离,相变可逆性及循环热稳定性进行研究,结果表明,聚氨酯中硬段的存在对软段结晶有着很大的影响,当软段分子量达到2000或以上时,软段才具有较大的结晶度和熔融相变焓,且硬段含量必须高于一定值才能形成较为完善的物理交联网络以保证材料在发生相变时维持固体状态.同时符合这两个条件的试样能具有较好的固-固相变储热性能.就软段PEG含量及分子量对材料储热性能的影响进行了研究,通过调节软段含量与分子量得到一系列具有不同相变焓和相变温度的聚氨酯固-固相变储热材料.经测试还发现,该材料具备很好的相变可逆性和循环热稳定性,是一类很有开发前景的相变储热材料.     

聚醚聚氨酯-聚醚聚酰亚胺合金相结构的研究

通过不同分子量的对－氨基苯甲酸酯封端的聚（四次亚甲基）醚和均苯甲甲酸二酐反应,合成了聚醚聚酰胺酸;然后以不同重量比将聚醚聚氨酯和聚醚聚酰胺酸溶液混合反应亚胺化,制备了一系列不同硬段含量的聚醚聚氨酯－聚醚聚酰亚胺合金。用傅立叶变换红外光谱、动态力学分析、示差扫描量热、广角Ｘ－衍射、应力应变试验等分析测试方法对合金进行了研究,结果表明聚醚聚氨酯－聚醚聚酰亚胺合金具有很好的相分离结构,是一类新型耐高温、有韧性的热塑性弹性体。聚醚分子量相同的聚氨酯和聚酰亚胺形成的合金软段相容,合金具有两相结构;聚醚分子量不同的聚氨酯和聚酰亚胺形成的合金软段存在相分离,合金具有三相结构,表现在材料外观上分别为透明不透明的韧性膜,少量聚酰亚胺的掺入,能大大增加材料的耐热性能,而合金的材料力学性能没有明显变化。     

嵌段聚醚聚氨酯-酯热塑性弹性体的合成和性质

本文用对苯二甲酸双羟基乙二醇酯及其二聚体作扩链剂,合成了一系列聚醚聚氨酯-酯嵌段共聚物(PEUE),并用热分析法、动态力学分析、应力-应变等方法对所合成的聚氨酯材料进行了形态结构和性能关系的研究,结果表明:这类聚氨酯弹性体由于硬段具有较好的结晶性,致使材料的力学性能得到提高;另外,由于硬段酯基与软段聚醚的相互作用,材料的相容性有所改进.     

嵌段聚醚聚氨酯-酯热塑性弹性体的合成和性质

 本文用对苯二甲酸双羟基乙二醇酯及其二聚体作扩链剂,合成了一系列聚醚聚氨酯-酯嵌段共聚物(PEUE),并用热分析法、动态力学分析、应力-应变等方法对所合成的聚氨酯材料进行了形态结构和性能关系的研究,结果表明:这类聚氨酯弹性体由于硬段具有较好的结晶性,致使材料的力学性能得到提高;另外,由于硬段酯基与软段聚醚的相互作用,材料的相容性有所改进.     

相同软硬段质量配比聚醚酯弹性体PEG/PBT的结构与表征

以熔融缩聚法合成了一系列聚乙二醇(PEG)/聚对苯二甲酸丁二醇酯(PBT)聚醚酯热塑性弹性体,用NMR,FTIR,DSC及力学性能测试等方法表征了材料的结构及性能.讨论了在相同软硬段质量配比下,不同软硬段长度对材料性能的影响.结果表明,随着软段PEG长度增加,硬段PBT长度相应增长,弹性模量基本保持不变,抗拉强度、屈服应力及特性粘度增加.     

聚酯聚氨酯透气性的正电子研究

用正电子湮没寿命谱(PALS)研究了温度和PEG含量对以聚己二酸丁二醇酯(PBA)为软段的聚酯聚氨酯的自由体积特性和透气性的影响.实验结果表明,自由体积空洞的体积随着温度的升高而增加,分布变宽,导致透气性增大.不同PEG含量的聚酯聚氨酯PBA-10,PBA-15和PBA-20的水汽渗透系数(WVP)基本相同.结果表明,在这类聚氨酯中,影响透气性的主要因素不仅是自由体积,而且与材料的亲水性有关.     

脂肪族水性聚氨酯的动态力学行为研究

合成了一系列脂肪族水性聚氨酯 .考察了软段的组成、软段分子量及DMPA用量对产物动态力学性能的影响作用 .实验结果表明 ,软段的化学结构对水性聚氨酯的相态结构影响很大 .聚醚型水性聚氨酯具有较低的软段玻璃化转变温度 (Tgs) .聚醚型产物的微相分离程度高于聚酯型产物 .当采用聚酯和聚醚二元醇为混合软段时 ,Tgs随软段中聚醚含量的提高而逐渐降低 .提高DMPA用量 ,软段玻璃化转变温度Tgs移向低温区 ,硬段玻璃化转变温度Tgh移向高温区 ,说明体系的微相分离程度加大 .当软段分子量较低时 ,产物为半相容结构 ,只有一个主转变峰 ,软段的玻璃化转变以肩峰的形式出现 ;当软段分子量较高时 ,产物的微相分离程度较高 ,可以分别观察到软段及硬段的玻璃化转变 .总之 ,通过改变软段的种类、组成和分子量以及DMPA用量 ,可以大幅度地改变水性聚氨酯的形态结构 .     

聚乙二醇/聚对苯二甲酸丁二醇酯聚醚酯弹性体的合成与表征——不同硬段长度对材料性能的影响

以熔融缩聚法合成了一系列基于聚乙二醇 (PEG) 聚对苯二甲酸丁二醇酯 (PBT)的聚醚酯热塑性弹性体 ,用NMR、IR、DSC及力学性能测试等方法表征了材料的结构及性能 .讨论了在相同软段长度情况下 ,不同硬段长度对材料结构与性能的影响 .实验表明 ,随着体系中硬段PBT长度的减小 ,弹性模量、抗拉强度降低 ,特性粘度、吸水量及断裂形变量增加 ,材料性能良好可调     

Mechanistic implications of plastic degradation

Plastics have become an indispensable ingredient of human life. Their enormous use is a matter of great environmental and economic concern, which has motivated the researchers and the technologists to induce different degrees of degradations in the plastic. These degradations can be induced in a better way if their mechanistic implications are properly understood. A better understanding of the mechanism for these degradations is also advocated in order to facilitate the proper use of the alternative waste disposal strategies. In view of the facts concerning the plastic degradation, in this review article, we have discussed various types of polymeric degradations along with their mechanisms, which include photo-oxidative degradation, thermal degradation, ozone-induced degradation, mechanochemical degradation, catalytic degradation and biodegradation. This article also discusses the different methods used to study these degradations and the factors that affect these degradations.     

Nanoscale degradation of polypyrrole films under oxidative stress: An atomic force microscopy study and review

Atomic force microscopy (AFM) is employed to monitor the surface morphology of polypyrrole (PPy) films grown on vitreous carbon substrates during the catalytic reduction of Cr(VI) to Cr(III). The morphology of freshly-prepared films depends on substrate characteristics. Upon reaction, uniform nodules of aggregated PPy clusters appear. No significant differences in surface morphology are found between its oxidized and reduced forms. Loss of catalytic activity after 8-9 oxidation/reduction cycles of exposure to the chromate solution (oxidation) and electrochemical recharging of the film at negative potentials (reduction) correlates well with the observed polymer film dissolution/detachment from the carbon substrate. Formation of well-defined circular features (PPy rings) at different stages leads to a model for the film degradation process that includes formation of Cl₂ gas inside the polymer matrix. In the final stages, the bulk of the film typically fractures and detaches from the electrode. A catalytically inactive, ultrathin PPy layer remains on the substrate even after prolonged exposure to the target solution. A review of techniques for the study of PPy aging/degradation is given.     

部分水解聚丙烯酰胺降解研究进展

高分子量的水溶性聚丙烯酰胺 (PAM)在不同领域均有广泛的应用 ,但其分子量的降解行为直接影响到从生产、使用到最终处置的各个环节。本文将主要对各环节中涉及的降解作用研究进展进行综述 ,包括化学降解、生物降解、热降解和机械降解等。     

The effect of extrusion processing on Zein

Extrusion processing was carried out on zein where extrusion temperatures were varied between 100 and 300 °C. Differential scanning calorimetry and thermogravimetric analysis showed that thermal degradation begins around 220 °C. The color of the extrudate changed the most above temperatures of 160 °C. Sodium dodecyl sulfate polyacrylamide gel electrophoresis shows that the protein begins cross-linking at 120 °C and chain cleavage begins above 180 °C. Examination of the protein structure of the extrudate using near and far-UV circular dichroism shows a gradual reduction in α-helix and β-sheet content between 100 and 240 °C; above 240 °C the rate of secondary structure loss is increased. Infrared spectroscopy displayed differences in the carbonyl absorption with the carbonyl peak becoming narrower and shifting towards higher wavenumber with increased extrusion temperature. The peak at 1533 cm⁻¹ becomes slowly smaller with higher extrusion temperature until 220 °C after which its loss accelerates. Nuclear magnetic resonance spectroscopy demonstrated the formation of new carbonyl peaks and the loss of alkoxyl carbons suggesting that in addition to protein backbone cleavage the alcohol moieties of serine and threonine are oxidizing to carboxylic acids. Tensile properties begin to deteriorate when extruding above 140 °C; extruding above 220 °C yields a material that cannot be molded.     

聚氨酯的热分解研究进展

介绍了有关聚氨酯热性能研究的状况,着重阐述了聚氨酯在不同气氛下的热解机理及热解动力学的内容,同时也阐述了聚氨酯今后热解研究的发展方向。     

全氟辛酸(PFOA)紫外光化学降解特性与机理

全氟辛酸(PFOA)因其在环境介质中的稳定性、持久性和生物累积性,常规方法很难将其降解,或必须付出昂贵的代价.近几年,一些研究者利用紫外光化学降解环境介质中的PFOA,显示出了优良的应用前景.本文结合国内外研究者近年来的工作,介绍了紫外光化学降解PFOA的原理与特性,对各体系中关键介质的作用与机理进行了讨论,针对紫外光化学降解PFOA存在的问题提出了见解,并对该领域研究的趋势进行了展望.     

Screening and Comparison of Lignin Degradation Microbial Consortia from Wooden Antiques

Lignin, which is a component of wood, is difficult to degrade in nature. However, serious decay caused by microbial consortia can happen to wooden antiques during the preservation process. This study successfully screened four microbial consortia with lignin degradation capabilities (J-1, J-6, J-8 and J-15) from decayed wooden antiques. Their compositions were identified by genomic sequencing, while the degradation products were analyzed by GC-MS. The lignin degradation efficiency of J-6 reached 54% after 48 h with an initial lignin concentration of 0.5 g/L at pH 4 and rotation speed of 200 rpm. The fungal consortium of J-6 contained Saccharomycetales (98.92%) and Ascomycota (0.56%), which accounted for 31% of the total biomass. The main bacteria in J-6 were Shinella sp. (47.38%), Cupriavidus sp. (29.84%), and Bosea sp. (7.96%). The strongest degradation performance of J-6 corresponded to its composition, where Saccharomycetales likely adapted to the system and improved lignin degradation enzymes activities, and the abundant bacterial consortium accelerated lignin decomposition. Our work demonstrated the potential utilization of microbial consortia via the synergy of microbial consortia, which may overcome the shortcomings of traditional lignin biodegradation when using a single strain, and the potential use of J-6 for lignin degradation/removal applications.     

气氛对尼龙1010热降解的影响

利用ＴＧ和ＤＴＡ研究了尼龙１０１０在Ｎ２气和空气流巾的降解过程和动力学，考察了反应气氛对降解步骤．降解温度、降解率和动力学参数的影响，分析了两者降解机理的可能差别．发现空气中的热氧降解为多步反应，而Ｎ２气中的热降解为一步反应Ｚ降解温度和降解率，Ｎ２气中均高于空气中；表观反应级数Ｎ２气中为１．０，空气中为１．１级．     

Investigation of Degradation of Structural Adhesives under Influence of Chemicals

Structural adhesives are used for joining materials also under conditions, where they through the application will be influenced by many different chemicals. The adhesives can – if not protected from the chemical influence – be degradated of the chemicals. The degradation can because of the different structures of the polymers in the adhesives result in lower strength of the joining area, but can also give higher strength but brittleness. Information of the structures of the structural adhesives used in the project have been taken from the data sheets from the manufacturers and have been compared with investigation of the structures by FTIR and DSC. In the laboratory the HSP's (Hansen Solubility Parameters) of the adhesives has been determined and compared with the theoretically estimated HSP's. The estimation has mainly been done by Lydersens group contribution method. The chemical resistance of the adhesives have been foreseen by using HSP's of the adheisves and compared them with the HSP's of the chemicals. The structural adhesives were most of the epoxy types and of the polyurethane types with different curing systems. The structural adhesives should all have high strength and an opening time of more than 30 minutes. They were in the laboratory cured up after the specifications from the manufacturer and were stored one week after curing before they were influenced by hte chosen chemicals. The chemicals were chosen from their functional groups. In the laboratory the adhesives were influenced by different chemicals at room temperarture and under elevated temperature and under different periods to develope the degradation curves for the different chemicals and to foresee the degradation time of the adhesives before their properties were not acceptable any more. The structure after influence of the chemicals is studied by FTIR. The results of the investigations have been that it is possible to estimate the degradation by using the HSP's of the adhesives and the chemicals, but to estimate the time before degradation has been so serious that the properties of the adhesives are not acceptable any more, it is necessary to add laboratory investigations to the HSP comparisons of adhesives and chemicals. The comparison of the HSP and of the chemicals by which the adhesives can be in its lifetime has seen to be usefull especially if the chemicals are pesticides.     

Organic Phosphites as Polymer Stabilizers

The antioxidative action of phosphonites and phosphites depends on their structure, the nature of the polymer to be stabilized and the aging conditions. Phosphorus compounds can act in different ways: as hydroperoxide decomposers (secondary antioxidants), as free-radical scavengers (primary antioxidants), as well as metal-complex forming agents. The stabilizing action of phosphites and phosphonites is due to three basic mechanisms: oxidation by hydroperoxides, substitution by alkoxyl radicals and hydrolysis to acidic phosphorus compounds and phenols. Modification of phosphites with additional functional groups such as hindered amine moieties leads to new stabilizing properties. An intramolecular synergistic effect is observed.