磁性Ag@Fe3O4@C负载纳米金的制备及其SERS性能

利用一步溶剂热法制备了具有核壳结构的Ag@Fe₃O₄磁性纳米颗粒,然后以葡萄糖作为碳源对Ag@Fe₃O₄进行包覆,再利用酰胺化反应成功的将聚乙烯亚胺（PEI）修饰到Ag@Fe₃O₄@C表面,最后以N-Au共价键的方式将Au纳米粒子组装到Ag@Fe₃O₄@C表面。以4-巯基苯甲酸（4MBA）为拉曼活性探针分子来考察该复合纳米材料的表面增强拉曼（SERS）性能。通过控制Au纳米粒子的加入量,来调节Ag@Fe₃O₄@C-Au复合纳米材料的SERS活性。通过实验测试及利用时域有限差分法（FDTD）得出不同纳米金用量包覆的Ag@Fe₃O₄@C磁性纳米颗粒对4MBA的SERS效果依次为Ag@Fe₃O₄@C-Au-40 > Ag@Fe₃O₄@C-Au-10 > Ag@Fe₃O₄@C-Au-60 > Ag@Fe₃O₄@C,其中Ag@Fe₃O₄@C-Au-40的饱和磁化强度为411 A·g^-1,其对4MBA的检测限为1×10^-9 mol·L^-1。这种功能性复合材料既具有良好的SERS活性,又可通过外加磁场的方式实现对待测分子的分离、富集。     

磁性Fe_2O_3/Au/Ag复合纳米粒子的制备及其富集作用研究

利用种子生长法制备了磁性Fe2O3/Au/Ag复合纳米粒子,采用UV-vis和SEM对其光学性质以及表面结构的变化进行了表征.通过调节硝酸银的用量,制备了一系列具有不同Ag壳层厚度和表面结构的双金属外壳纳米粒子.以苯硫酚(TP)为探针分子,研究了不同Ag壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性.结果表明其SERS活性与表面结构的改变有关,在同时出现Ag和Au光学性质的Fe2O3/Au/Ag复合纳米粒子表面可观察到最强的SERS效应,这与表面的针孔效应以及Ag和Au之间的耦合增强作用有关.考察了Fe2O3/Au/Ag复合纳米粒子的磁富集作用,并利用SERS原位监测磁富集溶液中低浓度TP的能力,研究结果表明通过磁富集可提高SERS检测限,并且Fe2O3/Au/Ag的磁富集能力较Fe2O3/Au弱,但前者SERS信号较强.     

超顺磁性Fe3O4/Au@Ag复合材料的合成及其SERS性能研究

利用溶剂热法和种子生长法分别合成Fe₃O₄磁性纳米粒子和Au@Ag核壳纳米粒子, 利用静电吸附方法成功将聚乙酰亚胺(PEI)修饰到Fe₃O₄表面并通过N-Ag共价键将Au@Ag核壳纳米粒子组装到Fe₃O₄表面, 制备Fe₃O₄/Au@Ag复合材料. 通过控制Au@Ag复合粒子的加入量, 来调节Fe₃O₄/Au@Ag复合材料的表面增强拉曼(SERS)活性. 以对巯基苯胺(p-ATP)为拉曼活性探针分子来考察该复合纳米材料的SERS性能, 检测限可以低至2×10^-9 mol/L. 同时, 将该复合材料应用于农药分子福美双的检测, 检测限可以低至10^-6 mol/L. 这种功能性复合材料既具有良好的SERS活性, 又具有Fe₃O₄磁性内核, 可以通过外加磁场实现对待测分子的分离、富集, 具有更广泛的应用前景.     

Ag_核Au_壳金属复合纳米粒子的制备及表面增强拉曼光谱研究

在已制备好的Ag纳米粒子表面,通过化学还原的方法沉积生长Au包裹层,制备了粒子尺寸为50-70nm的Ag核Au壳复合纳米粒子.通过改变AuCl₄^-量,使Ag_100-xAu_x中Au的含量由x=0变为x=30.用UV-Vis吸收光谱和透射电子显微镜(TEM)对该结构纳米粒子进行了表征,并以对巯基苯胺(PATP)为探针分子进行表面增强拉曼光谱(SERS)研究.表面拉曼光谱表明,该结构的纳米粒子具有比Ag更强的SERS活性,随着Au:Ag比例的逐渐增加,其活性呈现先增大后减小的趋势,其最大增强约为Ag纳米粒子的10倍.     

Fe3O4@SiO2@mTiO2介孔多功能纳米复合颗粒的制备及载药能力

以溶剂热法制备氨基功能化的Fe_3O_4纳米颗粒为磁核,结合溶胶-凝胶法和模板法在其表面先后包覆上致密的SiO_2层和介孔TiO_2层,制备了磁性-发光-微波热转换性-介孔结构为一体的多功能核-壳结构纳米复合颗粒,并对其结构、性能及载药能力进行了研究。XRD分析表明:Fe_3O_4表面包覆上了无定形结构的SiO_2和TiO_2。TEM照片表明:所得的纳米复合颗粒具有明显的核壳结构和完美的球形,构成核的Fe_3O_4颗粒的尺寸在40~50 nm之间,Fe_3O_4@SiO_2@mTiO_2核壳结构纳米复合颗粒的尺寸为60~70 nm,壳层厚度约10 nm,并可观察到壳层中清晰的孔状结构。磁性、荧光光谱和微波热转换特性分析表明:该复合颗粒同时具有良好的发光性、磁性和微波热转换特性。N_2气吸附及药物负载率分析表明,该复合颗粒具有较高的比表面积(640 m~2·g~(-1))和介孔结构(孔径约2.8 nm)并且具有较高的药物负载率。     

利用去湿现象制备具有SERS活性的银纳米粒子图案

构建了具有表面增强拉曼散射(SERS)活性的二维有序环状与盘状的银纳米粒子结构, 利用CTAB包覆银纳米粒子的氯仿溶液直接在图案化的金基底上进行去湿, 当改变银纳米粒子的浓度时可以得到不同的图案. 利用原子力显微镜(AFM)对其结构进行了表征, 以4-巯基吡啶作为探针分子, 采用表面增强拉曼成像技术研究了这种基底的SERS活性, 这将为SERS的研究开拓新的领域.     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

Fe304@C/Pt复合纳米粒子的原位合成及其催化性质的研究

采用水热方法分别合成了Fe304磁性内核以及Fe3O4@C粒子.并原位合成了Fe3O4@C/Pt复合纳米结构,采用SEM,TEM红外光谱,Raman光谱等手段进行了相关表征.研究了纯Pt纳米粒子以及Fe3O4@C/Pt复合纳米结构催化硼氢化钠(NaBH4)还原对硝基苯酚(4-NP)的反应活性,并利用外加磁场富集的方式对...     

Fe_3O_4@SiO_2@Ag纳米复合材料的制备及其对苯唑西林的表面增强拉曼光谱检测

以水热法合成的Fe_3O_4磁性纳米粒子为核,以SiO_2为包覆壳,采用晶种法在其表面沉积银纳米粒子(AgNP_3),制备具有高活性及"核-壳"结构的Fe_3O_4@SiO_2@Ag表面增强拉曼光谱(SERS)活性基底。通过扫描电镜、透射电镜、能谱、X射线衍射和傅里叶变换红外光谱等技术手段对其形貌与结构进行表征。结果表明,该基底粒径均一、分散均匀。利用该SERS活性基底对苯唑西林进行SERS检测,结果表明对苯唑西林具有极高的灵敏度,检测限达1.0×10~(-11) mol/L。同时,对苯唑西林的浓度和1 028 cm~(-1)特征峰强度进行线性拟合,其线性关系良好,相关系数r为0.996。该SERS活性基底的稳定性好、灵敏度高,已成功应用于不同剂型药物中苯唑西林的快速检测。     

Fe3O4@Au核-壳纳米复合材料的制备及对农药福美双的SERS检测研究

首先采用热分解法制备了Fe₃O₄纳米材料, 再将其作为磁性核, 分别采用种子沉积法和种子介导生长法制备了Fe₃O₄-Au核-卫星纳米复合材料和Fe₃O₄@Au核-壳纳米复合材料, 并对其形貌和性能进行了表征分析. 结果表明, 所制备的Fe₃O₄-Au核-卫星和Fe₃O₄@Au核-壳纳米复合材料粒径均匀, Au纳米颗粒均匀沉积/包覆在Fe₃O₄纳米材料表面, 且样品均具有良好的磁响应性. 使用4-氨基苯硫酚(4-ATP)作为拉曼探针分子, 对比了这两种纳米复合材料作为SERS基底时的拉曼信号增强效果. 结果显示, Fe₃O₄@Au核-壳纳米复合材料是更优秀的SERS基底, 且该SERS基底具有良好的信号再现性. 最后, 使用Fe₃O₄@Au核-壳纳米复合材料作为SERS基底, 成功地在苹果皮上检测出残留福美双的SERS信号.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83A·m₂·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

中空分级结构Fe3O4@C/rGO复合材料的合成及其储锂性能

以氧化石墨烯(GO)为基底,Fe(NO_3)_3·9H_2O、异丙醇、甘油为原料,通过溶剂热法和后续热处理过程2步合成了Fe_3O_4@C/rGO复合材料,实现了碳包覆的Fe_3O_4纳米粒子自组装形成的分级结构空心球在氧化石墨烯片上的原位生长。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和恒流充放电等手段分析了材料的物理化学性能与储锂性能。结果表明,该复合材料在5.0 A·g~(-1)的电流密度下,仍有437.7 mAh·g~(-1)的可逆容量,在1.0 A·g~(-1)下循环200圈后还有587.3 mAh·g~(-1)的放电比容量。这主要归因于还原态氧化石墨烯(rGO)对碳包覆Fe_3O_4分级空心球整体结构稳定性和导电性的提高。     

Preparation and mechanism of Fe3O4/Au core/shell super-paramagnetic microspheres

In the presence of Fe₃O₄ nano-particles, a new type of super-paramagnetic Fe₃O₄/Au microspheres with core/shell structures was prepared by reduction of Au³⁺ with hydroxylamine. The formation mechanism of the core/shell microspheres was studied in some detail. It was shown that the formation of the complex microspheres can be divided into two periods, that is, surface reaction-controlled process and diffusion-controlled process. The relative time lasted by either process depends upon the amount of Fe₃O₄ added and the initial concentration of Au³⁺. XPS analysis revealed that along with increasing in coating amount, the strength of the characteristic peaks of Au increased, and the Auger peaks of Fe weakened and even disappeared. Size distribution analysis showed that the core/shell microspheres are of an average diameter of 180 nm, a little bit larger than those before coating.     

Mesoporous MnSiO3@Fe3O4@C Nanoparticle as pH-responsive T1-T2* Dual-modal Magnetic Resonance Imaging Contrast Agent for Tumor Diagnosis

Mesoporous structured MnSiO₃@Fe₃O₄@C nanoparticles (NPs) were prepared via a facile and efficient strategy, with negligible cytotoxicity and minor side efforts. The asprepared MnSiO₃@Fe₃O₄@C NPs hold great potential in serving as pH-responsive T₁-T₂^* dual-modal magnetic resonance (MR) imaging contrast agents. The released Mn²⁺ shortened T₁ relaxation time, meanwhile the superparamagnetic Fe₃O₄ enhanced T₂ contrast imaging. The release rate of Mn ions reaches 31.66% under the condition of pH=5.0, which is similar to tumor microenvironment and organelles. Cytotoxicity assays show that MnSiO₃@Fe₃O₄@C NPs have minor toxicity, even at high concentrations. After intravenous injection of MnSiO₃@Fe₃O₄@C NPs, a rapid contrast enhancement in tumors was achieved with a significant enhancement of 132% after 24 h of the administration. Moreover, a significant decreasement of 53.8% was witnessed in T₂ MR imaging signal. It demonstrated that MnSiO₃@Fe₃O₄@C NPs can act as both positive and negative MR imaging contrast agents. Besides, owing to the pH-responsive degradation of mesoporous MnSiO₃, MnSiO₃@Fe₃O₄@C NPs can also be used as potential drug systems for cancer theranostics.     

Microfluidic paper-based multiplex colorimetric immunodevice based on the catalytic effect of Pd/Fe3O4@C peroxidase mimetics on multiple chromogenic reactions

In this report, a non-toxic method was proposed for the simple synthesis of palladium nanoparticles (Pd)/Fe₃O₄@C peroxidase mimetics by virtue of in situ growth of Pd nanoparticles on Fe₃O₄@C magnetic nanoparticles. And a microfluidic paper-based multiplex colorimetric immunodevice (named α-sheet) was developed by site-selectively immobilizing multiple antigens owing to its intrinsic high-efficiency catalytic activity of peroxidase mimetics to multiple chromogenic reactions. The immunosensor platform was prepared by growing a layer of flower-like gold nanoparticles which could entrap the primary antibodies onto paper sensing zones, and the as-prepared Pd/Fe₃O₄@C peroxidase mimetics was used to label secondary antibodies. In the presence of 3,3′,5,5′-tetramethylbenzidine and o-phenylenediamine chromogenic substrates, Pd/Fe₃O₄@C peroxidase mimetics catalyzed chromogenic reactions and showed different colors with respective intensity. To precisely identify the intensity, a piece of black wax printed chromatographic paper with three observing windows (named β-sheet) was flatted on α-sheet. Under the optimal condition, the proposed multiplex colorimetric immunodevice displayed wide linear ranges from 0.005 to 30 ng mL⁻¹ with low detection limits of 1.7 pg mL⁻¹ for carcinoembryonic antigen (CEA) and α-fetoprotein (α-AFP). Meanwhile, the proposed method provided provided a non-toxic, low-cost and promising tool for point-of-care diagnosis.     

Au nanoparticles grafted on Fe3O4 as effective SERS substrates for label-free detection of the 16 EPA priority polycyclic aromatic hydrocarbons

Several methods and materials have been explored for the sensitive and practicable detection of polycyclic aromatic hydrocarbons (PAHs). However, it is still a challenge to develop simple and cost-effective sensing techniques for PAHs. Herein we report the synthesis and construction of Fe₃O₄@Au SERS substrate. This magnetic substrate was composed by Fe₃O₄ microspheres and Au NPs. The size, morphology, and surface composition of Fe₃O₄@Au were characterized by multiple complimentary techniques including scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The spatial distributions of electro-magnetic field enhancement around Fe₃O₄@Au was calculated using finite difference time domain (FDTD) simulations. As a result of its remarkable sensitivity, the Fe₃O₄@Au-based SERS assay has been applied to detect the 16 EPA priority PAHs. The LODs achieved by our method (100–5 nM, 16.6–1.01 μg L⁻¹) make it promising for the rapid screening of highly contaminated cases. As a proof-of-concept study, the substrate was applied in SERS sensing of PAHs in river matrix. The 16 PAHs could be differentiated based upon their characteristic SERS peaks. Most importantly, the detection was successfully conducted using a portable Raman spectrometer, which could be used for on-site monitoring of PAHs.     

Optical and magnetic properties of small-size core–shell Fe3O4@C nanoparticles

Core–shell Fe₃O₄@C magnetic nanoparticles which are of great interest for research have a widely applied prospect. However, people know little about the optical and magnetic properties of the small-size Fe₃O₄@C nanoparticles due to the difficulty of uniformly coating small size Fe₃O₄ nanoparticles. In this paper, the influence of carbon shell coating on the optical and magnetic properties of small size Fe₃O₄ nanoparticles was presented. Carbon coating can strengthen the absorption intensity in the UV–visible light region through the introduction of oxygen defects on the surface of the nanoparticles by nitric acid treatment. Fe₃O₄ and Fe₃O₄@C nanoparticles both display typical superparamagnetic behavior in the high-temperature regime and a blocked state at low temperature from hysteresis loop, zero-field cooled and field cooled curves. Carbon coating reduce the surface uniaxial anisotropy, thus the average blocking temperature <T_B> decreases from 59 K of Fe₃O₄ nanoparticles to 50 K of Fe₃O₄@C nanoparticles.     

具备高首周库仑效率的高性能锂离子电池负极材料Li2Ni2(MoO4)3@C的制备

采用常规的固相反应法结合机械球磨制备了含碳质量分数23.7%的Li₂Ni₂（MoO₄）₃@C复合材料,并应用于锂离子电池负极。与纯Li₂Ni₂（MoO₄）₃相比,Li₂Ni₂（MoO₄）₃@C具有优异的电化学性能,在电流密度为200 mA·g^-1时,50周循环后,可逆容量高达845 mAh·g^-1。值得注意的是,Li₂Ni₂（MoO₄）₃@C的首周库仑效率高达85%。此外,运用循环伏安法对Li₂Ni₂（MoO₄）₃@C复合物存储锂行为进行了初步探索。