Kinetics of interaction of 3-aminopropyltriethoxysilane with silica gel using elemental analysis and 29Si NMR spectra

 Three silica gel sample systems, modified with 3-amino-propyltriethoxy silane (APTS), were prepared by sequentially sampling the reaction mixture at various time intervals. The concentrations of 3-aminopropylsilyl groups (APS) bound on the silica surface were determined by elemental analysis. For the same sample systems, ²⁹Si NMR intensities of an (–O)₄Si species belonging only to the silica gel particles and corrected by a cross-polarization correction factor were also measured. Both the APS-concentrations and the correc-ted ²⁹Si NMR intensities depended upon reaction time, reflecting the rate of the APTS–silica gel reaction. Kinetic analysis of these data was made by use of the Gauss–Newton method, and the overall reaction was found to consist of three reaction processes (an initial fast reaction, a slower second reaction and a much slower third reaction). In particular, the conversion of (–O)₃SiOH to (–O)₄Si is predominant in the second reaction process and the pore size of a silica gel particle affects the reaction mechanism. Received: 1 November 1996 Accepted: 24 January 1997     

纳米Cu2O催化二苯甲烷二氨基甲酸苯酯无溶剂热分解制备二苯甲烷二异氰酸酯

研究了无溶剂条件下纳米Cu₂O催化二苯甲烷二氨基甲酸苯酯(MDPC)热分解制备二苯甲烷二异氰酸酯(MDI),考察了纳米Cu₂O的制备条件与反应条件对MDPC热分解反应性能的影响.结果表明,水解法制备的纳米Cu₂O在Ar中于300℃焙烧2h,其催化性能最佳;最佳的反应条件为Cu₂O用量为原料总重的0.06%,反应温度220℃,反应压力0.6kPa,反应时间12min,此时MDPC转化率达到99.8%,MDI选择性86.2%.     

Microwave-induced domino-Knoevenagel-hetero Diels–Alder reaction—an easy route to di[1]benzopyrano[2,3-b:4′,3′-d]pyridine

MW-irradiation of a well-ground equimolar mixture of 2-(N-alkynyl-N-aryl)aminochromone-3-carbaldehyde and dimedone underwent domino-Knoevenagel-hetero Diels–Alder (DKHDA) reaction for nonterminal alkynes, whereas conventional heating of the above reaction mixture in ethanol in the presence of pyridine accomplished alkyne-carbonyl metathesis (ACM) reaction or both ACM and DKHDA reaction. Here is the first example of an organo-catalyzed ACM reaction.     

STUDY ON THE CHAIN-EXTENDING REACTION OF POLY (ETHYLENE TEREPHTHALATE) WITH 2, 2′-BIS (4H-3, 1-BENZOXAZIN-4-ONE)

2,2'-Bis (4H-3, 1-benzoxazin-4-one) (BBON) has been proved to be an effective chainextender for poly (ethylene terephthalate) (PET). In order to study the reaction mechanismand kinetics of chain-extending reaction, β-bishydroxyethylene terephthalate (BHET) wasselected as model compound. The NMR data, IR spectra and number average molecularweight (M_n) of the products obtained from the reaction of BBON and BHET verify thatBBON is a hydroxyl-reactive extender. The mechanism was discussed. Kinetics dataindicate that extending reaction is a second order reaction, and BBON has high reactivity.The activation energy (E_a) was measured.     

Development of an efficient and safe process for a grignard reaction via reaction caloremetry

A Grignard reaction of reactantA and phenyl magnesium chloride is used to make a pharmaceutical intermediate at the production scale. The elimination of protecting groups onA was proposed as a means to reduce synthesis costs. This new synthesis route, however, had process efficiency and safety issues associated with it: (1) build-up of unreactedA in the reactor, (2) influence ofA's particle size on the reaction rate, (3) the sensitivity of the reaction rate to the reaction temperature and to the (changing) solvent composition, and (4) the highly exothermic nature of the reaction.The Mettler RC1 Reaction Calorimeter was used to quantify the influence of solvent composition, temperature, and particle size on the reaction rate. Results indicated a dramatic effect of solvent composition and reaction temperature on the reaction rate; for example, over a temperature range of just 30°C, the reaction time decreased from more than a day to just a few minutes. At such high reaction rates, the vessel jacket could not remove the reaction heat sufficiently and the internal temperature rose adiabatically.These results were used to make process design and operation recommendations for safe and efficient plant operation with this modified Grignard reaction system.The authors would like to thank the following for their assistance in this work: E. Daugs for preparing the Grignard reagents, K.L. Gonzales for her help in running the experiments and in the subsequent data work-up; P.M. Russell for his assistance in the design of the slurry addition assembly, and K. Chritz and J. Engel for performing the HPLC analyses of the samples.     

Theoretical study on the mechanism of cycloaddition reaction between dimethyl germylidene and formaldehyde

The cycloaddition mechanism of the reaction between singlet dimethyl germylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated with CCSD (T)//MP2/6-31G* method. From the potential energy profile, we predict that the cycloaddition reaction between singlet dimethyl germylidene and formaldehyde has two dominant reaction pathways. First dominant reaction pathway consists of three steps: (1) the two reactants (R1, R2) firstly form an intermediate INT1a through a barrier-free exothermic reaction of 43.0 kJ/mol; (2) INT1a then isomerizes to a four-membered ring compound P1 via a transition state TS1a with an energy barrier of 24.5 kJ/mol; (3) P1 further reacts with formaldehyde(R2) to form a germanic heterocyclic compound INT3, which is also a barrier-free exothermic reaction of 52.7 kJ/mol; Second dominant reaction pathway is as following: (1) the two reactants (R1, R2) firstly form a planar four-membered ring intermediate INT1b through a barrier-free exothermic reaction of 50.8 kJ/mol; (2) INT1b then isomerizes to a twist four-membered ring intermediate INT1.1b via a transition state TS1b with an energy barrier of 4.3 kJ/mol; (3) INT1.1b further reacts with formaldehyde(R2) to form an intermediate INT4, which is also a barrier-free exothermic reaction of 46.9 kJ/mol; (4) INT4 isomerizes to a germanic bis-heterocyclic product P4 via a transition state TS4 with an energy barrier of 54.1 kJ/mol.     

Theoretical study on the reaction mechanism of CN radical with ketene

The bimolecular single collision reaction potential energy surface of CN radical with ketene (CH2CO) was investigated by means of B3LYP and QCISD(T) methods. The calculated results indicate that there are three possible channels in the reaction. The first is an attack reaction by the carbon atom of CN at the carbon atom of the methylene of CH2CO to form the intermediate NCCH2CO followed by a rupture reaction of the C-C bond combined with -CO group to the products CH2CN CO. The second is a direct addition reaction between CN and CH2CO to form the intermediate CH2C(O)CN followed by its isomerization into NCCH2CO via a CN-shift reaction, and subsequently, NCCH2CO dissociates into CH2CN CO through a CO-loss reaction. The last is a direct hydrogen abstraction reaction of CH2CO by CN radical. Because of the existence of a 15.44 kJ/mol reaction barrier and higher energy of reaction products, the path can be ruled out as an important channel in the reaction kinetics. The present theoretical computation results, which give an available suggestion on the reaction mechanism, are in good agreement with previous experimental studies.     

Theoretical study on the hydrolytic deamination reaction mechanism of guanine and (H2O)n

The hydrolytic deamination reaction mechanism of guanine (G) and (H₂O)n (n = 1–4) has been theoretically investigated, including solvent effects at the B3LYP/6-31G (d,p) and MP2/6-311G (d,p) levels. The results show that the hydrolytic deamination reaction of G involves two steps. In the first step, a tetra-coordinated intermediate is generated by a hydrolysis reaction, and then deamination reaction is carried out. In the second step, the final products form via a hydrogen transfer. For the hydrolytic deamination reaction of guanine and 3H₂O or 4H₂O, only two molecules of water participate in the reaction, and other water molecule make the transition state more stable as a catalyst. The study on the potential energy surface shows that the deamination reaction of G and nH₂O does not take place because of a higher barrier for the opening system, which is in agreement with the experimental result.     

Diels-Alder reaction of maldoxin with an isopropenylallene

The Diels-Alder reaction of maldoxin with an isopropenylallene at 60-75 °C afforded an adduct closely related to chloropestolide A (24%) and a second adduct (0-11%) that underwent an ene reaction to generate the chloropupukeanolide D (11-22%) skeleton. The Diels-Alder reaction occurred with good selectively (>5:1) from a single face of maldoxin under much milder conditions than previously reported for the analogous dimethoxycyclohexadienone. Furthermore, the ene reaction took place under mild conditions, whereas the analogous Diels-Alder adduct from the dimethoxycyclohexadienone did not undergo an ene reaction.     

Hypervalent Iodine Reagents Enable Chemoselective Deboronative/Decarboxylative Alkenylation by Photoredox Catalysis

Chemoselective C(sp³)? C(sp²) coupling reactions under mild reaction conditions are useful for synthesizing alkyl‐substituted alkenes having sensitive functional groups. Reported here is a visible‐light‐induced chemoselective alkenylation through a deboronation/decarboxylation sequence under neutral aqueous reaction conditions at room temperature. This reaction represents the first hypervalent‐iodine‐enabled radical decarboxylative alkenylation reaction, and a novel benziodoxole‐vinyl carboxylic acid reaction intermediate was isolated. This C(sp³)? C(sp²) coupling reaction leads to aryl‐and acyl‐substituted alkenes containing various sensitive functional groups. The excellent chemoselectivity, stable reactants, and neutral aqueous reaction conditions of the reaction suggest future biomolecule applications.     

Ab initio study on the mechanism of forming a silapolycyclic compound between silylidene and formaldehyde

The mechanism of the cycloaddition reaction of forming a silapolycyclic compound between singlet silylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6-31G* method. From the potential energy profile, it can be predicted that the cycloaddition reaction process of forming the silapolycyclic compound (P₂) for this reaction consists of four steps: (I) the two reactants first form a semi-cyclic intermediate INT1a through a barrier-free exothermic reaction of 32.5 kJ mol⁻¹; (II) this intermediate then isomerizes to an active four-membered ring intermediate INT1 via a transition state TS1a with an energy barrier of 30.8 kJ mol⁻¹; (III) INT1 further reacts with formaldehyde to form an intermediate INT2, which is also a barrier-free exothermic reaction of 30.1 kJ mol⁻¹; (IV) INT2 isomerizes to a silapolycyclic compound P₂ via a transition state TS2 with a barrier of 50.6 kJ mol⁻¹. Comparing this reaction path with other competitive reaction paths, we can see that this cycloaddition reaction has an excellent selectivity.     

Reaction heat-driven CO2 desorption during CO oxidation on Au(997) at low temperatures

Adsorption and reaction of CO and CO₂ were studied on oxygen-covered Au(997) surfaces by means of temperatureprogrammed desorption/reaction spectroscopy. Oxygen atoms (O(a)) on Au(997) enhances the CO₂ adsorption and stabilizes the adsorbed CO₂(a), and the stabilization effect also depends on the CO₂(a) coverage and involved Au sites. CO₂(a) desorption is the rate-limiting step for the CO+O(a) reaction to produce CO₂ on Au(997) at 105 K and exhibits complex behaviors, including the desorption of CO₂(a) upon CO exposures at 105 K and the desorption of O(a)-stabilized CO₂(a) at elevated temperatures. The desorption of CO₂(a) from the surface upon CO exposures at 105 K to produce gaseous CO₂ depends on the surface reaction extent and involves the reaction heat-driven CO₂(a) desorption channel. CO+O(a) reaction proceeds more easily with weakly-bound oxygen adatoms at the (111) terraces than strongly-bound oxygen adatoms at the (111) steps. These results reveal complex rate-limiting CO₂(a) desorption behaviors during CO+O(a) reaction on Au surfaces at low temperatures which provide novel information on the fundamental understanding of Au catalysis.     

Ab initio Mechanism Study on the Reaction of Chlorine Atom with Formic Acid

The potential energy surface(PES) for the reaction of Cl atom with HCOOH is predicted using ab initio molecular orbital calculation methods at UQCIDS(T,full)6-311 G(3df,2p)//UMP2(full)/6-311 G(d,P) level of theory with zero-point vibrational energy (ZPVE) correction.The calculated results show that the reaction mechanism of Cl atom with formic acid is a C-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom with a 3.73kJ/mol reaction barrier height,leading to the formation of cis-HOCO radical which will reacts with Cl atom or other molecules in such a reaction system.Because the reaction barrier height of O-site hydrogen abstraction reaction from cis-HOC(H)O molecule by Cl atom which leads to the formation of HCO2 radical is 67.95kJ/mol,it is a secondary reaction channel in experiment,This is in good agreement with the prediction based on the previous experiments.     

The Effect of Position Replacement of Functional Groups on the Stepwise character of 1,3‐Dipolar Reaction of a Nitrile Oxide and an Alkene

It is a well‐known fact that by changing the 1,3‐dipolar cycloaddition (1,3‐DC) reaction mechanism from concerted to stepwise, the stereospecificity is lost; since in synthesizing the required heterocyclic molecules that reaction is a requisite, it is important to study the concertedness of that reaction. Several papers on this subject have already stated that the existence of electron withdrawing groups (EWG) or electron donor groups (EDG) on dipole or dipolarophile leads to a high‐energy differentiation between the dipole HOMO and dipolarophile LUMO (or vice versa) as well as the emergence of an intermediate in the reaction pathway. This paper seeks answering the question of when an EWG on dipole and an EDG on dipolarophile could be a factor in making the reaction mechanism stepwise, and does repositioning of functional groups in replacing dipole and dipolarophile switches the reaction mechanism from stepwise into concerted or vice versa?     

Thermokinetics on the reaction of formation of Dy[(C5H8NS2)3(C12H8N2)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen•H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ•mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ•mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.

     

Diamine/Silane-Modified controlled pore glass: The covalent attachment reaction from aqueous solution and the mechanism of reaction of bound diamine with copper(II)

The reaction of N-2-aminoethyl-3-aminopropyltrimethyoxysilane (en-silane) with the surface of controlled pore glass (CPG) in aqueous solution was examined. The reaction appears to involve the rapid (ca. l min) formation of a covalently bound monolayer of en-silane at room temperature. Multilayers of bound polymeric en-silane can be obtained by reaction at elevated temperature. The latter reaction is slower, presumably because of the more stringent steric requirements of polymer formation in chain growth away from the CPG surface. For en-silane coverages ranging from 1.7 to 8.5 μ mol m^-2, the mechanism for the complexation of copper(II) by ethylenediamine (en) bound to a CPG surface by reaction of en-silane with CPG was also investigated by thermometric and potentiometric titrimetry. A two-step mechanism is proposed. The data indicate that the first step of the surface reaction involves formation of a Cu(en)₄ complex as opposed to the Cu(en) complex formed in the first step of the solution reaction. The second step results in a complex similar to the Cu(en)₂; species formed in solution.     

Effect of stoichiometry and diffusion on an epoxy/amine reaction mechanism

The bulk phase kinetics of an epoxy (DGEBA) /amine (DDS) thermoset have been studied using DSC, FTIR, and ¹³C-NMR. In the absence of catalyst, the reaction was found to involve a main exothermic reaction between epoxide and amine hydrogen and a side reaction between tertiary amine formed in the main reaction and epoxide. The main reaction was exothermic while the side reaction had no discernable exotherm. Etherification did not occur to any significant extent. Since only the main reaction is exothermic, DSC was very useful for studying the main reaction kinetics. FTIR was used for determining whether epoxide and amine hydrogen were consumed at different rates as a way of following the side reaction. An IR band previously unused by other investigators was used to monitor the amine hydrogen concentration. NMR confirmed the above mechanism by identifying the formation of a quaternary ammonium ion/alkoxide ion pair as a reaction product of tertiary amine and epoxide. This mechanism has been successfully fit to a rate law valid over the entire extent of reaction. The rate constant for the epoxy/amine addition reaction was found to depend on hydroxide concentration (extent), reaction temperature, and glass transition temperature and included contributions from uncatalyzed and autocatalyzed parts. The side reaction (quaternary ammonium ion formation) formed weak bonds which did not affect the overall system T_g. Both reactions were second order. The rate constants for the main reaction first increase with increasing extent due to autocatalysis by hydroxide before decreasing due to the diffusion limit caused by gelation and vitrification. © 1995 John Wiley & Sons, Inc.     

Production of (2R,3S)-3-(4-methoxyphenyl)glycidic acid methyl ester using an emulsion bioreactor containing lipase fromSerratia marcescens

An emulsion bioreactor for production of (2R,3S)-3-(4-methoxyphenyl) glycidic acid methyl ester ([-]MPGM) from a racemic mixture ([±]MPGM) using the lipase fromSerratia marcescens has been proposed. Kinetics of hydrolyzing reaction and purification of (-)MPGM from the reaction mixture were investigated to provide a basis for industrial application of this bioreactor. The hydrolyzing reaction in the bioreactor proceeded at a rate that was first order in substrate concentration. The reaction rate was affected by a stirring speed and the ratio of the aqueous phase containing lipase to the toluene phase containing substrate. Phase separation after the enzymatic reaction was accomplished by addition of surfactant to the reaction mixture, and crystalline (-)MPGM with a chemical purity of 100% and optical purity of 100% enantiomeric excess was obtained in a high yield of 40–43% by concentration of the toluene solution.     

A theoretical approach to the complexation and decomplexation processes in the reaction C60 + He ⇌ (He@C60)

To theoretically investigate the complexation and decomplexation processes in the reaction C₆₀ + He ? (He@C₆₀), four possible reaction paths are assumed, so that while He approaches and penetrates the C₆₀ cage (a) a pentagon, (b) a hexagon, (c) a short bond, or (d) a long bond will be expanded on its original sphere or plane to form a window. The computation is performed by the quantum chemical method EHMO/ASED. The results show that the probability of completing this reaction in terms of the tunnel effect can be neglected and the reaction is completed by overcoming a potential barrier of the reaction. It is easily completed by opening a planar window than by opening a shperical window. The probability through reaction path (b) with a barrier of 1247.94 kJ/mol is larger than that through reaction path (a) with a barrier of 1438.26 kJ/mol. The probability through reaction path (d) is the largest with a barrier of 1076.78 kJ/mol, when the planar expansion forming a window of a 9-membered ring is at the optimized value of 0.40 å. When He deviates the center and approaches the C₆₀ cage, there will be a charge distribution on C₆₀ with changing in size and even in sign along the longitude corresponding to the symmetry axis, but the absolute value gradually decreases. This situation is similar to the charge transfer on carbons in sraight-chain polyene. © 1995 John Wiley & Sons, Inc.     

Preparation of bis-pyrylium salts

Six methods are described for the preparation of bis-pyrylium salts: (1) treatment of 4,4′-bi-2-flavene or 4-(4H-flav-2-en-4-yl)flavylium perchlorate with triphenylmethyl perehlorate; (2) reaction of an aromatic o-hydroxyaldehyde and 1,4-deacetylbenzene under acidic conditions; (3) reaction of o-hydroxyacetophenone, 1,4-diacetylbenzene, perchloric acid and acetic acid; (4) reaction of a 2- or 4-methylpyrylium salt with 2- or 4-pyrone in the presence of phosphorus oxychloride; (5) oxidation of a 1,2-ethanediylidenebis-flavene or -thiaflavene, a bis-flavenylidene or -thiaflavenylidene, and a bis-pyranylidene or -thiapyranylidene by means of cupric perchlorate; and (6) reaction of 4-methylflavylium and -thiaflavylium perchlorate with bromine in acetic acid.