Reaction scheme of ammonia synthesis in the ECR plasmas

The reaction scheme of ammonia synthesis in the ECR plasma apparatus teas investigated from both identifications of the species in the plasmas and the adsorbed species on the surface of a steel substrate placed in the plasmas. The adsorbed species were considerably different when different kinds of plasmas are used. NH, species were adsorbed on the steel substrate surface in the nitrogen-hydrogen plasma, and N₂ molecules were adsorbed in the nitrogen plasma. By the application of a negative bias potential on the substrate, the adsorption of N atom or Fe-N bond formation was identified on the steel substrate surface. When the stainless steel wall of the chamber was covered with aluminum foil, the yield of NH,, radicals, which were on both the substrate and in the plasma, decreased. By exposure of the substrate, on which N₂ molecules or N atoms adsorbed, to the hydrogen plasma, N₂ and N disappeared from the steel substrate surface, forming ammonia. Moreover, the adsorption of NH,, radicals disappeared when the stainless steel wall surface was covered with aluminum foil. Thus, the surface of the stainless steel wall acts as a catalyst in ammonia formation. The formation of ammonia in the nitrogen-hydrogen ECR plasma, in which the steel substrate served as the catalyst, is not only through the dissociative adsorption of excited nitrogen molecules but also through the dissociative adsorption of nitrogen molecular ions.     

Surface-enhanced Raman scattering of a series of n-hydroxybenzoic acids (n = P, M and O) on the silver nano-particles

Surface-enhanced Raman scattering (SERS) spectra of a series of n-hydroxybenzoic acids (n-HBA, n = P, M and O) adsorbed on the silver nano-particles were studied, respectively, in the silver colloidal solution and on the dried silver-coated filter paper. On the same substrate, the different molecules' SERS spectra were different, while on the different substrates the same molecules' SERS spectra were also different. Significant changes were found in the SERS spectra of PHBA molecules adsorbed on the two substrates, and the changes found in MHBA's spectra on two substrates were next to PHBA's, while almost no changes were found in the spectra of OHBA molecules. Moreover, it was found, on the filter paper, that the SERS spectra of the same molecules would change with the coverage density of the silver nano-particles. The analyses showed that the origins of these changes were the different adsorption behavior of molecules adsorbed on the silver nano-particles. Because in these three molecules the relative positions of the carboxyls and hydroxyls on the benzenes are different, the adsorption behaviors of these three molecules adsorbed on the silver surfaces are also different. The experimental results suggest that the surface characteristic of the substrate and the surface configuration of the adsorbate could exert a great influence on the adsorption behavior of the adsorbates on the substrates.     

Correlation between Ferromagnetic Layer Easy Axis and the Tilt Angle of Self Assembled Chiral Molecules

The spin–spin interactions between chiral molecules and ferromagnetic metals were found to be strongly affected by the chiral induced spin selectivity effect. Previous works unraveled two complementary phenomena: magnetization reorientation of ferromagnetic thin film upon adsorption of chiral molecules and different interaction rate of opposite enantiomers with a magnetic substrate. These phenomena were all observed when the easy axis of the ferromagnet was out of plane. In this work, the effects of the ferromagnetic easy axis direction, on both the chiral molecular monolayer tilt angle and the magnetization reorientation of the magnetic substrate, are studied using magnetic force microscopy. We have also studied the effect of an applied external magnetic field during the adsorption process. Our results show a clear correlation between the ferromagnetic layer easy axis direction and the tilt angle of the bonded molecules. This tilt angle was found to be larger for an in plane easy axis as compared to an out of plane easy axis. Adsorption under external magnetic field shows that magnetization reorientation occurs also after the adsorption event. These findings show that the interaction between chiral molecules and ferromagnetic layers stabilizes the magnetic reorientation, even after the adsorption, and strongly depends on the anisotropy of the magnetic substrate. This unique behavior is important for developing enantiomer separation techniques using magnetic substrates.     

Adsorption and kinetic studies of cationic and anionic dyes on pyrophyllite from aqueous solutions

The adsorption of cationic Methylene Blue (MB) and anionic Procion Crimson H-EXL (PC) dyes from aqueous medium on pyrophyllite was studied. Changes in the electrokinetics of pyrophyllite as a function of pH were investigated in the absence and presence of multivalent cations. The results show that pyrophyllite in water exhibits a negative surface charge within the range pH 2-12. Pyrophyllite is found to be a novel adsorbent for versatile removal of cationic and anionic dyes. The negative hydrophilic surface sites of pyrophyllite are responsible for the adsorption of cationic MB molecules. The adsorption of anionic PC dye is possible after a charge reversal by the addition of trivalent cation of Al. Nearly 2 min of contact time are found to be sufficient for the adsorption of both dyes to reach equilibrium. The experimental data follow a Langmuir isotherm with adsorption capacities of 70.42 and 71.43 mg dye per gram of pyrophyllite for MB and PC, respectively. For the adsorption of both MB and PC dyes, the pseudo-second-order chemical reaction kinetics provides the best correlation of the experimental data.     

Magnetic field‐assisted liquid crystal alignment on a solid substrate: drift of easy orientation axis,anchoring energy and angular distribution of adsorbed liquid crystal molecules

The anchoring properties of a film of anisotropically adsorbed liquid crystal (LC) molecules on a rigid substrate have been studied. The LC film was prepared by cooling it from the isotropic phase in the presence of a magnetic field parallel to the surface of the substrate. Relationship between the anchoring energy, easy axis direction and angular distribution of the adsorbed molecules, and changes in their angular distribution due to adsorption–desorption, were studied. The dependence of the anchoring energy on the duration and the temperature at which the LC film is annealed allowed an estimation of the activation energy of desorption of LC molecules on ITO surface, ΔE≈0.55 eV. The results suggest that hydrogen bonds are responsible for the adsorption of LC molecules on the substrate.     

The adsorption behavior of p-hydroxybenzoic acid on a silver-coated filter paper by surface enhanced Raman scattering

On dried filter paper coated with silver nanoparticles, surface-enhanced Raman scattering (SERS) spectra of p-hydroxybenzoic acid (PHBA) were studied, and high-quality SERS spectra were obtained, indicating that the silver-coated filter paper is a highly SERS-active substrate. The analysis showed that the adsorption behavior of PHBA molecules on silver nanoparticles coated on filter paper was different from that in silver aqueous colloids. On the filter paper, it was found that the SERS spectra of PHBA changed with the proportion of PHBA molecules and silver nanoparticles, indicating that the adsorption behavior of PHBA molecules changed with the proportion. The probable reasons are given.     

Internal Architecture and Adsorption Sites of Violet Lander Molecules Assembled on Native and KBr‐Passivated InSb(001) Surfaces

The adsorption of individual Violet Lander molecules self‐assembled on the c(8×2) reconstructed InSb(001) surface in its native form and on the surface passivated with one to three monolayers of KBr is investigated by means of low‐temperature scanning tunneling microscopy (STM). Preferred adsorption sites of the molecules are found on flat terraces as well as at atomic step edges. For molecules immobilized on flat terraces, several different conformations are identified from STM images acquired with submolecular resolution and are explained by the rotation of the 3,5‐di‐tert‐butylphenyl groups around σ bonds, which allows adjustment of the molecular geometry to the anisotropic substrate structure. Formation of ordered molecular chains is found at steps running along substrate reconstruction rows, whereas at the steps oriented perpendicularly no intermolecular ordering is recorded. It is also shown that the molecules deposited at two or more monolayers of the epitaxial KBr spacer do not have any stable adsorption sites recorded with STM. Prospects for the manipulation of single molecules by using the STM tip on highly anisotropic substrates are also explored, and demonstrate the feasibility of controlled lateral displacement in all directions.     

CO分子在不同类型Al2O3表面的吸附构型和电子结构

采用基于赝势平面波基组的密度泛函理论方法对CO分子在α-Al₂O₃（0001）以及γ-Al₂O₃的（100）、（110C）、（110D）表面上的吸附构型和电子结构进行系统研究.计算结果表明,CO倾向于选取C端吸附在表层Al原子上,并主要通过其5σ轨道与表面发生作用,吸附后部分电子从CO转移到底物,导致各Al₂O₃表面功函均发生不同程度的下降,与气相相比,吸附后CO分子的C-O伸缩振动频率均发生蓝移.通过对比CO在各表面上的吸附情况,可以看出CO可作为检测Al₂O₂不同类型表面活性中心的有效探针分子.     

金与银电极表面甘氨酸分子吸附作用的SERS光谱研究

本文利用表面增强拉曼光谱(SERS)技术研究了甘氨酸在金与银基底表面的吸附作用特征。研究表明甘氨酸分子以COO-的不对称形式吸附于金电极表面,且NH2也是其可能的吸附位点;而在银电极表面,则主要是通过COO-的对称形式而吸附。在此基础上,进一步研究了电极电位与溶液酸碱性对吸附于粗糙化银电极表面甘氨酸分子吸附作用的影响。研究结果表明,甘氨酸分子中去质子化羧基的吸附作用受电位影响较小,而电位对-NH3+吸附作用的影响程度较大。另一方面,溶液pH值对银电极表面的甘氨酸分子吸附行为的影响也较为显著。随着溶液酸性减小羧基倾向于相对于电极表面平行吸附。这是由于随着溶液碱性增大氨基质子化程度的减小,有利于氨基在银电极表面吸附。这将改变分子的吸附构型使其更接近于电极表面。这些变化主要出现在pH值大于10的条件下。     

pluronics和卵磷脂混合载药乳化膜的稳定性

单滴法;pluronics;卵磷脂;混合界面吸附膜;乳状液稳定性     

Scanning tunneling microscopy and scanning tunneling spectroscopy studies of planar and nonplanar naphthalocyanines on graphite (0001). Part 1: effect of nonplanarity on the adlayer structure and voltage-induced flipping of nonplanar tin-naphthalocyanine

The adsorption of base-free naphthalocyanine (Nc), a planar molecule, and tin-naphthalocyanine (SnNc), a nonplanar molecule, on a freshly cleaved highly oriented pyrolytic graphite (HOPG) surface at low sample temperature (50 K) has been studied using a variable-temperature scanning tunneling microscope in ultra-high vacuum conditions. The planar molecules form large areas of defect-free ordered monolayer with high molecular packing density while the nonplanar molecules show different phases of adsorption with lower molecular packing density. The SnNc adlayers follow the same geometry as the graphite substrate and form pure phases of adsorption with either all molecules in a Sn(2+) up or Sn(2+) down geometry. Moreover, a one-dimensional selectivity is observed in still another phase of Sn(2+) down geometry. Multilayers show a completely different kind of adsorption in each case. Nc molecules show columnar pi-stacking whereas the SnNc molecules exhibit noncolumnar stacking. Distinctly, a voltage-induced flipping of nonplanar tin-naphthalocyanine in the monolayer has been observed which can possibly be applied to single-molecular information storage.     

Surface adsorption effects in the inkjet printing of an aqueous polymer solution on a porous oxide ceramic substrate

The inkjet printing of a polymeric solution into a porous substrate was studied, with the focus on phenomena occurring within the pore space during infiltration. Lines of aqueous polyacrylic acid (PAA) solution were printed onto the surface of porous, high-green-density ceramic powder beds. The PAA is a binder for the ceramic particles, allowing removal of the printed line structure ("primitive") and characterization of the extent of polymer penetration. Large differences in cross section of the retrieved printed structure were observed between ceramic systems and for different specific surface area powders. A mechanism for "filtration" of the polymer by adsorption onto the ceramic particle surfaces during infiltration was proposed. The adsorption of PAA onto Al2O3, SiO2, and TiO2 was characterized via adsorption isotherms, and the trend of primitive cross section with PAA adsorption was consistent with the filtration hypothesis, as was the variation with powder-specific surface area. These results can be generalized to other systems where a solution is inkjet printed onto a porous substrate (e.g., inks on plain paper, porous coated papers, etc.) Utilization of the adsorption effects may allow confinement of the solute molecules (e.g., colorant) to a small region near the substrate surface.     

表面增强拉曼光谱应用于标记免疫多组分检测

作为一种新型的免疫检测方法, 表面增强拉曼光谱(SERS)技术被应用于标记免疫多组分检测. 以多种不同的标记分子(苯硫酚, 联吡啶类分子, 氰基吡啶类分子)分别标记多种不同免疫金溶胶, 通过抗体抗原之间所具有的特异吸附性, 进一步组装“固相抗体-待测抗原-标记免疫金溶胶”多组分三明治复合体系. 利用表面增强拉曼光谱谱峰较窄, 具有较强的分辨率及高灵敏度的特点, 对多种标记分子特征谱峰进行分析判断, 从而识别所加入的多种抗原, 实现SERS标记免疫多组分同时检测的目的, 并对其中氰基吡啶类分子的吸附进行了探讨.     

Collagen adsorption and structure on polymer surfaces observed by atomic force microscopy

The structure and adsorption patterns of type I and type III collagen were imaged on various polymer substrates with atomic force microscopy. Type I collagen had higher adsorption on polystyrene than on a series of polymethacrylates and formed a network of tightly, interwoven strands. Upon adsorption to different polymethacrylates, with varying side chain lengths, the collagen molecules formed long, branching fibrils. Types I and III collagen had different adsorption patterns, in some cases, on the identical substrate material. For example, instead of forming a tightly packed network, type III forms long, branching fibers on the polystyrene surface. On other materials, such as poly(n-butyl methacrylate), the two types of collagen showed similar adsorption pattern and structure. Adsorbed collagen was also imaged on various blends of polystyrene and polymethacrylates to determine how the polymer surface chemical structure and surface topography mediates protein adsorption.     

Protein-coated beta-ferric hydrous oxide particles. An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on beta-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to beta-FeOOH. The adsorption of the two proteins was found to shift the particles' isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A "reversal" in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their "permanent" dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the "eastern" and "northern" patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Polymer particles having molecule-imprinted skin layer

We developed a novel type of protein molecule-imprinted particles. Bovine hemoglobin (BHb) and submicron-sized polymer particles were used in this study as a template and a substrate, respectively. BHb molecules were softly and sparsely adsorbed on the particle surface. Then skin layer was formed with a thickness of BHb molecule size by living radical graft polymerization of moderately hydrophilic monomers. After that, BHb molecules were removed from their embedded spaces. The ability of vacant spaces on the surface layer of particles to take BHb molecules selectively was examined. Successful results were obtained not only in single protein adsorption system but also in the competitive adsorption system of several proteins and BHb, that is, the imprinted space was reserved for BHb even if other proteins coexisted, although their nonspecific adsorption on non-imprinted surface was not avoided.     

Magnetic field-assisted liquid crystal alignment on a solid substrate: drift of easy orientation axis, anchoring energy and angular distribution of adsorbed liquid crystal molecules

The anchoring properties of a film of anisotropically adsorbed liquid crystal (LC) molecules on a rigid substrate have been studied. The LC film was prepared by cooling it from the isotropic phase in the presence of a magnetic field parallel to the surface of the substrate. Relationship between the anchoring energy, easy axis direction and angular distribution of the adsorbed molecules, and changes in their angular distribution due to adsorption-desorption, were studied. The dependence of the anchoring energy on the duration and the temperature at which the LC film is annealed allowed an estimation of the activation energy of desorption of LC molecules on ITO surface, ΔE≈0.55 eV. The results suggest that hydrogen bonds are responsible for the adsorption of LC molecules on the substrate.     

Monte Carlo simulations on the effect of substrate geometry on adsorption and compression

Canonical Monte Carlo simulations were used to study the adsorption and compression of fluid layers on model substrates with cubic, (111) fcc, and graphite geometries. The effect of the relative size of the fluid and substrate molecules on adsorption was considered for strong molecule-surface interactions. In the case of monolayer formation, it was found that the surface geometry and the size of the adsorbate molecules had a significant effect on the structure of the adsorbed layer. These structures varied from well-ordered, commensurate layers to liquid-like structures. Lateral compression was observed for certain fluid to substrate molecule sizes. For the interactions studied in this work, it was found that maximum lateral compression occurred on the cubic surface when adsorbate molecules had a diameter approximately 15% larger than the substrate diameter. In the case of multilayer formation, it was found that second and higher adsorbed layers could compress into the adsorbed layers below them. For cubic substrates, the interlayer compression was predicted analytically with reasonable accuracy, with maximum interlayer compression found for fluid diameters approximately 90% the size of substrate molecule diameters.     

Organic zeolites from a diolefinic monomer

Submicrometer particles of diethyl p-phenylenediacrylate (EPA) with tunable molecular adsorption characteristics were produced by solid-state photopolymerization in the presence of template molecules. EPA monomer particles were produced by rapid expansion of supercritical solutions (RESS), and deposited directly onto surface acoustic wave (SAW) resonators. The EPA particles were photopolymerized directly on the SAW devices in the presence of molecular templates, and dynamic sorption isotherms of C1- through C9-alkanes were studied to characterize the particle-vapor interaction. The mass increase due to vapor uptake into the particulate coatings was measured by monitoring the SAW resonance frequency during vapor sorption. The vapor selectivity and molecular porosity of the particulate coatings were studied in situ on the piezoelectric substrate by measuring sorption isotherms. A gradual exclusion of smaller alkane molecules from the molecularly imprinted particulate coatings was observed with decreasing template molecule size. The observed selective and reversible adsorption of alkane analytes with different molecular sizes suggest that these imprinted polymers may be categorized as organic analogues of zeolites.     

Water adsorption on a p(2x2)-Ni(111)-O surface studied by surface x-ray diffraction and infrared reflection absorption spectroscopy at 25 and 140 K

The adsorption of water molecules on an oxygen-predosed p(2x2)-Ni(111)-O surface was studied by surface x-ray diffraction and infrared reflection absorption spectroscopy (IRAS) at temperature of 25 and 140 K. Precise structures including adsorbed water, predosed oxygen, and substrate nickel atoms at these two temperatures were determined by x-ray structural analysis. It was found that water molecules adsorb on oxygen additive sites, forming a hydrogen bond at 25 K. A predosed 2x2 oxygen atom appears to accommodate one, two, or three water molecules at positions relating to threefold rotation symmetry. When the surface temperature was raised to 140 K, water molecules appear at an atop site of Ni. The distance between Ni and the oxygen atoms of a monomer water molecule was found to be 0.2241(22) nm. The adsorbed water molecule induces buckling and a lateral shift of the substrate nickel. The IRAS results provided evidence regarding the existence of two distinct adsorption sites. Water molecules in the low-temperature phase exhibit bands from both hydrogen-bonded nuOD and free OD stretchings, while those in the high-temperature phase lie flat with a molecular plane parallel to the surface.