Study of the miscibility and segmental motion of STMAA-PBMA polymer blends and semi-interpenetrating polymer networks by an ESR spin probe method

Linear polymer blends and semi-interpenetrating polymer networks (IPNs) with controlled hydrogen bonding interactions based on poly(styrene-co-methacrylic acid) (STMAA) and poly(butyl methacrylate) (PBMA) were studied by an ESR spin probe method. The observed composite ESR spectra with fast- and slow-motion components in all the samples were ascribed to two-phase morphology. For linear blends, the temperatures T(a) corresponding to appearance of the fast motion, T(d) corresponding to the disappearance of slow motion, T(5mT) and the rotational correlation times tau(c) increased with increasing carboxylic acid content in STMAA. It was concluded that the degree of mixing of the blends was improved with increasing carboxylic acid content, owing to the enhanced hydrogen bonding interactions between the carboxylic acids in STMAA and the ester groups in PBMA. With respect to semi-IPN samples, there existed a competition in the microphase structure between the intercomponent hydrogen bonding interactions, which improved the miscibility of the samples and the intracomponent cross-linking, which might lead to phase separation in the systems with strong specific interactions. When the semi-IPN contained 29 mol% carboxylic acid, the temperatures T(d), T(5mT) and tau(c) reached their minimum values, which indicated that the sample reached its maximum miscibility.     

Epoxy resin/poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) blends cured with 1,3,5-trihydroxybenzene: miscibility and intermolecular interactions

Epoxy resin (ER)/poly(ethylene oxide) (PEO) and/or poly(e-caprolactone) (PCL) blends cured with 1,3,5-trihydroxybenzene (THB) were prepared via the in situ curing reaction of epoxy monomers in the presence of PEO and/or PCL, which started from the initially homogeneous mixtures of DGEBA, THB and PEO and/or PCL. The miscibility and the intermolecular specific interactions in the thermosetting polymer blends were investigated by means of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The two systems displayed single and composition-dependant glass transition temperatures (T _gs), indicating the full miscibility of the thermosetting blends. The experimental T _gs of the blends can be well accounted for by Gordon-Taylor and Kwei equations, respectively. The T _g-composition behaviors were compared with those of poly(hydroxyether of bisphnol A) (Phenoxy) blends with PEO and PCL. It is noted that the formation of crosslinked structure has quite different effects on miscibility and intermolecular hydrogen bonding interactions for the thermosetting polymer blends. In ER/PEO blends, the strength of the intermolecular hydrogen bonding interactions is weaker than that of the self-association in the control epoxy resin, which is in marked contrast to the case of Phenoxy/PEO blends. This suggests that the crosslinking reduces the intermolecular hydrogen bonding interactions, whereas the intermolecular hydrogen bonding interactions were not significantly reduced by the formation of the crosslinking structure in ER/PCL blends.     

Motional heterogeneity and phase separation of functionalized polyester polyurethanes

The polyester polyurethanes, PU based on isophoronediisocyanate, polycaprolactone, and 1,4-butanediol with different amounts of functional groups introduced into the hard segments via second chain extender, 2,2′-bis-(hydroxymethyl) propionic acid, were investigated by electron spin resonance, ESR, spin label method, wide-angle X-ray diffraction, WAXD, optical microscopy and differential scanning calorimetry, DSC. The objective of this study is to clarify the effect of functional groups on the motional heterogeneity, microphase separation and crystallisation of the polyurethanes. The concentration of carboxylic groups varied from 0 to 0.45 mmol g⁻¹. The temperature-dependent ESR spectra of spin labelled PU hard segments chain ends with stable nitroxide radical 2,2,6,6-tetramethyl-4-aminopiperidin-1-yloxyl are sensitive to the amount of functional groups attached to the hard segments. Composite ESR spectra of functionalized PU, with fast and slow component, suggest that PU hard segments are partitioned in two motionally different environments. According to the ratio of fast and slow component motional heterogeneity increases with an increase of functional groups up to 0.35 mmol g⁻¹ and above this concentration slow component decreases indicating higher degree of phase mixing and stronger effect of soft segments. Polarized micrographs and the extent of ordering from WAXD measurements reveal the changes of phase morphology with the carboxylic groups content in a similar way as shown from the motional behaviour of spin label on the segmental level. The degree of crystallinity and the separation of spherulitic rings are decreasing above a certain concentration of functional groups. The effect of functional groups in PU on the hard and soft segment mixing is discussed in terms of additional noncovalent interactions and chain structure which at critical level of interactions lead to a formation of more open hard segment structure accessible to interaction with the soft segment.     

Morphology of a highly asymmetric double crystallizable poly(epsilon-caprolactone-b-ethylene oxide) block copolymer

The morphology of a highly asymmetric double crystallizable poly(epsilon-caprolactone-b-ethylene oxide) (PCL-b-PEO) block copolymer has been studied with in situ simultaneously small and wide-angle x-ray scattering as well as atomic force microscopy. The molecular masses Mn of the PCL and PEO blocks are 24,000 and 5800, respectively. X-ray scattering and rheological measurements indicate that no microphase separation occurs in the melt. Decreasing the temperature simultaneously triggers off a crystallization of PCL and microphase separation between the PCL and PEO blocks. Coupling and competition between microphase separation and crystallization results in a morphology of PEO spheres surrounded by PCL partially crystallized in lamella. Further decreasing temperature induces the crystallization of PEO spheres, which have a preferred orientation due to the confinements from hard PCL crystalline lamella and from soft amorphous PCL segments in different sides. The final morphology of this highly asymmetric block copolymer is similar to the granular morphology reported for syndiotactic polypropylene and other (co-) polymers. This implies a similar underlying mechanism of coupling and competition of various phase transitions, which is worth further exploration.     

Miscibility of poly(ϵ-caprolactone) and of poly(styrene-co-acrylonitrile) with poly(styrene-co-acrylic acid)

The miscibility of poly (?-caprolactone) (PCL) with poly (styrene-co-acrylic acid) (SAA) and of poly (styrene-co-acrylonitrile) (SAN) with SAA was examined as a function of the comonomer composition in the copolymers. For PCL/SAA blends it was found that PCL is miscible with SAA within a specific range of copolymer compositions. Segmental interaction energy densities were evaluated by analysis of the equilibrium melting point depression and application of a binary interaction model. The results suggest that the intramolecular repulsion in SAA copolymer plays an important role in inducing the miscibility. Additionally, the critical AA content in SAA for the blend to be homogeneous was predicted by correlating the segmental interaction energy densities with the binary interaction model. For SAN/SAA blends, it was also found that SAA is miscible with SAN within a specific range of copolymer compositions. From the binary interaction model, segmental interaction energy denisties between different monomer units were estimated from the miscibility map and were found to be positive for all pairs, indicating that the miscibility of the blends is due to the strong repulsion in the SAA copolymers.     

Compatibility and crystallization in poly(ethylene oxide)-poly(methyl methacrylate) semi-interpenetrating polymer network

Differential scanning calorimetry together with dynamic mechanical analysis were employed to investigate the crystallinity and the miscibility in poly(ethylene oxide)/crosslinked poly(methyl methacrylate) semi-IPN (interpenetrating polymer networks). The crystallinity of poly(ethylene oxide) in the semi-IPN is found to depend on the crosslink density of PMMA as well as the overall content of PEO. Of special interest is that an increase in the crosslink density tends to increase the crystallinity contrary to our expectation, indicating crystallization and phase separation may proceed simultaneously during IPN formation. The investigation of glass transition behaviors with dynamic mechanical analysis suggests phase separation (i.e., there exist two amorphous phases: one PEO-rich phase, the other a PMMA-rich phase). © 1993 John Wiley & Sons, Inc.     

Semi-interpenetrating polymer networks toward sulfonated poly(ether ether ketone) membranes for high concentration direct methanol fuel cell

Semi-IPNs were constructed by forming the crosslinking networks via the reaction between BPPO and diamine cross-linkers to overcome the dimensional swelling and methanol-permeation issues of SPEEK.     

Synthesis, characterization and thermoreversible behaviours of poly(dimethyl siloxane)/poly(N-isopropyl acrylamide) semi-interpenetrating networks

Simultaneous and sequential poly(N-isopropyl acrylamide) (PNIPAAm)/poly(dimethyl siloxane) (PDMS) semi-interpenetrating polymer networks (IPNs) with different linear PDMS contents were prepared by free radical polymerization method. Their phase morphologies have been characterized by FTIR, DSC and SEM. The simultaneous semi-IPNs exhibited phase transition temperatures (T_pt) shifted higher temperature from glass transition temperatures (T_g) of their respective homopolymers, suggesting a heterophase morphology and only physical entanglement between the PNIPAAm network and linear PDMS with high molecular weight (Mn≈9000 g/mol). For sequential semi-IPNs, the shift of T_pts towards lower temperature suggested that the chemical interaction between the constituents of the IPNs increased with increasing PDMS content in the network. In addition, these semi-IPNs were characterized for their thermo-sensitive behaviour by equilibrium swelling studies. The results showed that incorporation of hydrophobic PDMS polymer into the thermo- and pH-sensitive PNIPAAm and P(NIPAAm-co-IA) (itaconic acid) hydrogels by semi-IPN formation decreased swelling degrees of IPNs without affecting their LCSTs whereas addition of acrylated PDMS (Tegomer V-Si 2250) as crosslinker instead of N,N^′-methylenebisacrylamide (BIS) into the structures of these hydrogels changed their LCSTs along with their swelling degrees.     

Preparation and swelling behavior of amphoteric superabsorbent composite with semi-IPN composed of poly(acrylic acid)/Ca-bentonite/poly(dimethyldiallylammonium chloride)

Amphoteric superabsorbent composite with semi-interpenetrating polymer networks (semi-IPN) composed of poly(acrylic acid) (PAA)/Ca-bentonite/poly(dimethyldiallylammonium chloride) (PDMDAAC) was prepared by a combination of intercalative polymerization and a sequential IPN method and the effects of reaction parameters on the swelling capacity were studied. PDMDAAC was used as a polycation to modify bentonite and form semi-IPN with lightly crosslinked PAA. FTIR and TG were used to characterize the amphoteric superabsorbent composites with semi-IPN. The thermal stability of the product was not degraded as in the case of using small molecular surfactant to modify bentonite. The contents of carboxylic groups and nitrogen had been determined. This indicated that the product with certain content of carboxylic groups and nitrogen is inclined to exhibit excellent swelling capacity. The presence of PDMDAAC improved the swelling capacity. The resulting amphoteric superabsorbent composite showed excellent swelling capacity of 1578 g/g in distilled water and 136 g/g in 0.9 wt% NaCl solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Intramolecular interactions in poly(styrene-co-acrylonitrile)/poly(ε-caprolactone) blends

Specific interactions in blends of poly(ε-caprolactone) (PCL) and poly(styrene-co-acry-lonitrile) (SAN) were studied as a function of copolymer composition and blend ratio by using Fourier-transform infrared spectroscopy (FTIR). It was shown that miscibility occurred within a certain range of copolymer compositions because the presence of PCL reduced the thermodynamically unfavorable repulsion between styrene and acrylonitrile segments in the random copolymer. This effect was observed in terms of a shift to higher frequencies in the 700 cm^-1 γ-CH out-of-plane deformation vibration absorption of styrene and in the approximately 2236 cm^?1 C?N stretching frequency band in acrylonitrile segments. Specific intermolecular interactions between SAN and PCL were not observed in this study. © 1993 John Wiley & Sons, Inc.     

Miscibility of poly(ε-caprolactone), a semicrystalline polymer,with amorphous poly(styrene-4-hydroxystyrene) copolymers

The miscibility of poly(ε caprolactone) (PCL) with poly(styrene-co-4-hydroxystyrene) (PHS) copolymers was investigated as a function of comonomer composition experimentally and with calculations by two models; the binary interaction model and the association model. PCL was found to be completely miscible with PHS copolymers containing 5 or more mole percent of 4-hydroxystyrene (HS) comonomer units for the entire range of blend compositions. Segmental interaction densities, B_ijs, were determined by the analysis of the equilibrium melting point depression and by the application of the binary interaction model. By correlating the segmental interaction energy densities with the binary interaction model, thermodynamic miscibility is for comonomer composition over five mole percent of 4-hydroxystyrene, which is in agreement with the experimental phase behavior. Application of the association model for specific interactions to blends also predicts the experimental miscibility boundary and phase behavior for all the PHS copolymers/PCL blends. © 1995 John Wiley & Sons, Inc.     

Segmental dynamics in poly(ε‐caprolactone)/poly(L‐lactide) copolymer networks

Poly(ε‐caprolactone) (PCL) and poly(lactic acid) (PLA) networks were prepared from macromonomer diols functionalized with methacrylic anhydride, which allows one to get self‐crosslinkable polymers. Besides, both macromonomers were copolymerized to get copolymer networks with different compositions (namely, PCL/PLA: 0/100, 70/30, 50/50, 30/70, 100/0). Dielectric and calorimetric experiments allow one to conclude the microphase separation of the system: one phase made of pure PCL domains while the second one consists of caprolactone units, which somehow plasticize PLA and moves its main relaxation (glass transition) to lower temperatures. The effect of crosslinking PLA on the dynamics of the system was further investigated by comparing with the dynamics for linear PLA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 183–193, 2009     

Relationships between ringed spherulitic morphology and miscibility in blends of poly(ɛ-caprolactone) with poly(benzyl methacrylate) versus poly(phenyl methacrylate)

 Ringed spherulites are an interesting phenomenon that is observed only in very few miscible systems. For the first time, the relationship between the state of chain intermixing and the ring-band pattern was demonstrated. Two previously demonstrated miscible blend systems, poly(ɛ-caprolactone) (PCL) with poly(benzyl methacrylate) (PBzMA) and PCL with poly(phenyl methacrylate) (PPhMA), were studied in order to understand the mechanism of ring-band formation in the spherulites and the relationships between the ring-band pattern and the state of miscibility. In both miscible PCL/PBzMA and PCL/PPhMA systems, extinction rings were observed within the PCL spherulites. In the PCL/PBzMA blend, the extinction rings are not as distinct (owing to distortion) as those in the PCL/PPhMA blend system. Analysis was performed and discussions were made to reveal relationships between miscibility, interaction strength, and the pattern of the ring bands in the PCL spherulites in polymeric mixtures. Received: 5 January 2000/Accepted: 14 March 2000     

Synthesis and characterization of semi-interpenetrating polymer network based on poly(dimethylsiloxane) and poly[2-(dimethylamino)ethyl methacrylate]

A semi-interpenetrating polymer network (semi-IPN) based on poly(dimethylsiloxane) and poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) was prepared. The material obtained was characterized by infrared spectrometry, differential scanning calorimetry, thermogravimetric analysis and scanning electronic microscopy. The results indicated the presence of PDMAEMA into the semi-IPNs. Only the network with the highest amount of crosslinker [(3-chloropropyl)trimethoxysilane] was stable in water. To evaluate the hydrophilic/hydrophobic character of the obtained material, swelling measurements were performed for the stable network in water and in toluene. The semi-IPN was able to adsorb about 34 % in mass of water, indicating that an appropriate hydrophylic/hydrophobic balance was obtained. That behavior is desirable since the material was designed for metal adsorption from aqueous medium, without a lost in the ability to swell in less polar solvents.     

Melting behavior,miscibility, and hydrogen-bonded interactions of poly(ε-caprolactone)/poly(4-hydroxystyrene-co-methoxystyrene) blends

The miscibility of poly(4-hydroxystyrene-co-methoxystyrene) (HSMS) and poly(ε-caprolactone) (PCL) was investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR). HSMS/PCL blends were found to be miscible in the whole composition range by detecting only a glass transition temperature (T_g), for each composition, which could be closely described by the Fox rule. The crystallinity of PCL in the blends was dependent on the T_g of the amorphous phase. The greater the HSMS content in the blends, the lower the crystallinity. The polymer–polymer interaction parameter, χ₃₂, was calculated from melting point depression of PCL using the Nishi-Wang equation. The negative value of χ₃₂ obtained for HSMS/PCL blends has been compared with the value of χ₃₂ for poly(4-hydroxystyrene) (P4HS)/PCL blends. The specific nature, quantitative analysis, and average strength of the intermolecular interactions in HSMS/PCL and P4HS/PCL blends have been determined at room temperature and in the molten state by means of Fourier transform infrared spectroscopy (FTIR) measurements. The FTIR results have been in good correlation with the thermal behavior of the blends. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 95–104, 1998     

In situ study of the breakout crystallization in the poly(butadiene)-block-poly(ε-caprolactone) thin film

Despite its wide occurrence in soft confined block co-polymers, breakout crystallization remains poorly understood and is difficult to control. In this work, thin films of cylinder-forming poly(butadiene)-block-poly(ε-caprolactone) (PB-b-PCL) diblock co-polymers, with PCL being the minority block, have been chosen as the study subject. We demonstrate a new route to study the breakout crystallization by obtaining the microphase separation structure within terraced lamellae first and then in situ tracking down the lamellar coalescence, resulting from the development of the crystal growth front. We find that the crystal growth front has sucked materials from the surrounding amorphous lamellae, which lead to the decrease of the lamellar zones and coalescence of the microphase separation structure. Dividing the breakout crystallization into parallel breakout and vertical breakout, we illustrate that it is the crystallization-driven molecular diffusion that make the molecules overcome the topography constraint and grow into large-scale spherulite. Moreover, the results show that the polymer microphase separation structure has a significant influence on the crystal nucleation and greatly retarded the crystal growth rate. With a well-designed microphase separation structure within terraces and an easily tunable atomic force microscopy in situ imaging technique, an intensive study of the breakout crystallization and concomitant microdomain coalescence has been offered.     

PU/PNIPAM semi-IPN微孔膜温度响应性研究

将聚氨酯(PU)与聚N-异丙基丙烯酰胺(PNIPAM)半互穿网络聚合物(semi-IPN)通过浸入沉淀相转化方法制备成微孔膜,并从亲水性、吸水溶胀性以及透湿性等方面对其温度响应性进行了讨论.PNIPAM的引入使膜的亲水性、吸水性和透湿性大为改善,并显著提高了膜的温度响应能力;但与此同时也使得膜的韧性降低.当PU/PNIPAM为3/1时,可获得最好的综合性能.同传统无孔致密膜相比,PU/PNIPAM semi-IPN微孔膜的透湿机理是基于微孔的开闭,在维持显著的温敏透湿性的同时可实现较高的高温透湿量.     

Self-assembly of mixtures of block copolymers of poly(styrene-b-acrylic acid) with random copolymers of poly(styrene-co-methacrylic acid)

The effects of the addition of random copolymers of poly(styrene-co-methacrylic acid) [P(S-co-MAA)] on the self-assembly of block copolymers of poly(styrene-b-acrylic acid) (PS-b-PAA) are described. The effects of variation of five factors, including the MAA content, the weight fraction and molar mass of the P(S-co-MAA), the initial concentration of the mixture, and the length of the PAA segment in the block copolymer, were investigated. With increasing MAA content, the localization of the random copolymer in the aggregate changed from the core to the interface, which led to a morphological transition from spheres to vesicles. Vesicles, mixtures of vesicles and large spheres, and large spheres alone were formed with increasing weight fraction of the random copolymer. When the molar mass of the random copolymer was high, both rods and vesicles were observed at low water contents; otherwise, only vesicles were observed. The vesicle size increased (from 100 to 140 nm) with increasing initial polymer concentration, whereas the vesicle membrane thickness remained constant. The size of the vesicles prepared from the mixtures increased with water content but decreased with the length of PAA in the diblock.     

Phase-mixed poly(ethylene glycol)/poly(trimethylolpropane triacrylate) semi-interpenetrating polymer networks obtained by rapid network formation

Semi-interpenetrating polymer networks (semi-IPNs) of poly(ethylene glycol) (PEG) in poly(trimethylolpropane triacrylate) (TMPTA) were synthesized from PEG melts in neat TMPTA monomer, using PEG of molecular weights from 4000 to 100,000 g/mol. Differential scanning calorimetry and transmission electron microscopy were used to examine phase separation occurring during network formation. The degree of phase separation was observed to depend upon the rate of PEG aggregation relative to the rate of network formation during TMPTA polymerization. Higher molecular weight PEG and acrylate-functionalized PEG formed more phase-mixed networks compared to lower molecular weight PEG; acetatefunctionalized PEG showed no difference from unmodified PEG in the extent of phase mixing. For networks that demonstrated phase separation, the PEG was observed to be in two states: some being phase mixed and solvent inextractable, and some being phase separated and solvent extractable. Phase-mixed networks could be obtained from this thermodynamically incompatible polymer pair utilizing rapid photopolymerization systems to overcome PEG phase aggregation and kinetically entrap the PEG in a nonequilibrium phase-mixed state. These mixed-phase semi-IPNs of PEG and TMPTA may be useful in biological applications where the presence of PEG is desired throughout the bulk matrix rather than as a surface graft to reduce biological interactions. © 1994 John Wiley & Sons, Inc.     

Investigation of polymer miscibility by spectroscopic methods. III. Labeling of poly(vinyl chloride), poly(methyl methacrylate) and poly(styrene-co-acrylonitrile) with fluorescent chromophores for nonradiative energy transfer studies

Poly(vinyl chloride) (PVC) is generally recognized as miscible with s.poly(methyl methacrylate) (s.PMMA), poly(?-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) copolymer (SAN) containing 27 wt % AN. Nonradiative energy transfer (NRET) is a very sensitive technique in the investigation of the polymer miscibility. To compare by NRET the actual degree of miscibility of the PVC/s.PMMA, PVC/PCL, and PVC/SAN polymer pairs, each polymer is to be labeled with a fluorescent chromophore to an extent of 1 or 2 mol %. This paper reports efficient pathways to attach anthracene (acceptor) or naphthalene (donor) onto preformed PVC, s.PMMA, and SAN samples. All the attempts for grafting carbazole (donor) moieties have failed, as well as any labeling of PCL whatever the nature of the chromophore.