A Novel Mo—Doped Compound with Graphite—Like Structure：[H3O]2V3O8

1 INTRUDUCTION During the last few years, there has been much effort paid to the synthesis of new transition-metal oxides that might be active hosts for intercalation reactions. Vanadium and molybdenum in higher oxidation states with higher reacting ability tend to form polynuclear, anionic metal-oxygen clusters with an extraordinary variety of the relevant topology and electronic structures[1~3]. The preparation of the corresponding clusters is of special interest for different aspects …     

Synthesis of （2R,3aR,8aR）-6-Chloro-3a-hydroxy-1,2,3,3a,8,8a-hexahydropyrrolo[2,3-b]indole-2-carboxylic Acid Methyl Ester by Reductive Cyclization

A synthesis of (2R，3aR，8aR)-6-chloro-3a-hydroxy-1,2,3,3a,8,8a-hexahydropyrrolo[2,3-b]indole-2-carboxylic acid methyl ester (1) was achieved. An aldol reaction with Garner aldehyde, a hydroxyl introduction by Davis reagent, and a reductive intramolecular ring-closure reaction were served as the key steps. This piece of work provides a new way to synthesize the analogues of hexahydropyrrolo[2,3-b]indole, starting from readily available chemical substrates and inexpensive reagents.     

Synthesis of a 1,2,7,8-Tetraoxa-spiro[5.5]undecane

Synthesis of a new spiro organic peroxide is described. The peroxy bonds were incorporated into the substrate framework via an acid-catalyzed ketal exchange reaction using hydrogen peroxide as the source of peroxy linkage. The hydroperoxyl groups were then bonded at the OH ends via Hg（II）-induced electrophilic additions to the C-C double bonds, giving a novel sprio structure with one peroxy bond in each of the two six-membered rings. The ester functionalities in the side chains also make it possible to conduct further structural modifications.     

Enhancement of Formation of Polar Microenvironment in Polymer by Compressed CO_2

To date, polar microenvironments in apolar solvents have been successfully used in different ways, such as separation of proteins1, enzymatic or catalytic reactions in reverse micelles2. It is obvious that investigation of new method to create polar microenvironments is of great importance to both pure and applied sciences, and it is desirable that forming and breaking the microenvironments can be easily controlled. Compressed CO2 can dissolve in many organic solvents and the solubility can …     

STUDY ON THE SYNTHESIS AND PHYSICOCHEMICAL PROPERTIES OF SUCROSE POLYESTER

1. INTRODUCTIONSucrose polyester (SPE) is neither metabolized nor absorbed, it makes no caloric contribution to the diet. Excessive dietary fat intake is associated with increasing risk of obesity, high blood cholesterol, hypertension, coronary heart disease and some types of cancer. At present, fat substitutes are fashionable all over the world. SPE is a new functional fat substitute, which is similar to ordinary oils in physical and chemical properties. In a word, the research and dev…     

Study on the Cation-π Interactions between Ammonium Ion and Aromatic π Systems

The nature and strength of the cation-π interactions between NH4^＋ and toluene, p-cresol, or Me-indole were studied in terms of the topological properties of molecular charge density and binding energy decomposition. The results display that the diversity in the distribution pattern of bond and cage critical points reflects the profound influence of the number and nature of substituent on the electron density of the aromatic rings. On the other hand, the energy decomposition shows that dispersion and repulsive exchange forces play an important role in the organic cation （NH4^＋）-π interaction, although the electrostatic and induction forces dominate the interaction. In addition, it is intriguing that there is an excellent correlation between the electrostatic energy and ellipticity at the bond critical point of the aromatic π systems, which would be helpful to further understand the electrostatic interaction in the cation-π complexes.     

Photocatalytic Characterization of TiO_2 Supported on Active Carbon

Photocatalysis on TiO2, with a promising application to the elimination of organic contaminants from air and water, has been a particularly active area1. For such application, it is important to improve the efficiency of TiO_2 photocatalysts. In the most cases, the concentration of organic contaminants in water is extremely dilute (ppm level or below) and TiO_2 itself has low adsorbabilities for them, it usually takes a long time to complete their decomposition. One of the effective ways to …     

CuO/TiO2-Al2O3催化苯乙烯和重氮乙酸乙酯的环丙烷化反应

Cyclopropanes are extensively used as versatile intermediates in organic synthes is［1］. Various types of cyclopropanes exist in nature and many of them a re biologically active compounds［2,3］. The direct transfer of carbene fr om diazocompounds to olefins catalyzed by transition metals is the most straight forward route to synthesize cyclopropanes.     

Unactivated C(sp3)–H functionalization via vinyl cations

Direct functionalization of inert C(sp³)–H bonds is a topic of immense contemporary interest and exceptional value in organic synthesis.The recent research has established a novel and practical protocol which features the engagement of vinyl cation species to functionalize C(sp³)–H bonds.The discussion of the topic is arranged by the strategies to generate the reactive intermediates,including ionization of vinyl triflates,addition of electrophiles to alkynes,tandem cyclization of enynes or diynes,and decomposition ofβ-hydroxy-α-diazo ketones.This review closes with a personal perspective on the dynamic research area of unactivated C(sp³)–H functionalization via vinyl cations.Hopefully,it will provide timely illumination and beneficial guidance for organic chemists who are interested in this area.Meanwhile continued development of the field is strongly anticipated in the future.     

胆甾-4α-甲基-8-烯-3β，7α-二醇二乙酸酯的结构与性质研究

Lophenol, cholest-4α-methyl-7-en-3β-ol (1), obtained from Dracaena cochinchinensis (Lour.) S. C. Chen, was structurally modified. It was acetylated to protect 3β-hydroxyl group, and then oxidised by selenium dioxide in acetic acid to give cholest-4a-methyl-8-en-3β, Ta-diol diacetate (3). This compound 3 is unstable in chloroform solution or when heated and easily converted to a diene compound, cholest-4a-methyl-7,14-dien-3β-ol acetate (4). The structures of 3 and 4 were elucidated by means of IR, ^1H NMR, ^13C NMR and MS, and the absolute configuration of 3 was established by X-ray crystallography. The property of 3 was also discussed in this paper. Both 3 and 4 are new compounds and were reported for the first time.     

Short-axis substitution approach on ladder-type benzodithiophene-based electron acceptor toward highly efficient organic solar cells

Short-axis substitution, as an effective way to change the optical and electronic properties of the organic semiconductors for organic photovoltaics(OPVs), is a readily approach to modify non-fullerene acceptors, especially for the linear fused rings system. Here, two new fused-ring electron acceptors(CBT-IC and SBT-IC) were designed and developed by short-axis modification based on the dithienyl[1,2-b:4,5-b′]benzodithiophene(BDCPDT) system. Combined with a medium bandgap polymer donor J71, both of the OPV devices exhibit high power conversion efficiency(PCE) over 11%, and ～70% external quantum efficiencies. To better understand how this kind of substitution affects the BDCPDT based acceptors, a comparative analysis is also made with the the plain acceptor BDT-IC without this modification. We believe this work could disclose the great potential and the versatility of BDCPDT block and also enlighten other ladder-type series for further optimization.     

Morphology Control and Catalytic Dehydrogenation Performance of Zeolitic Imidazolate Frameworks-8北大核心CSCD

Zeolitic imidazolate frameworks-8（ZIF-8）is a kind of porous material with large specific surface area and strong stability,which is widely used in gas storage,separation,catalysis and other fields. In this work,the effect of different reaction conditions,such as the molar ratio of Zn2+ to 2-methylimidazole,the amount of surfactant and the reaction solvents,on the size and morphology of ZIF-8 were reported. Among these conditions,the molar ratio of Zn2+ to 2-methylimidazole is the key factor affecting the size and morphology of ZIF-8. The synthesized ZIF-8 nanoparticles were characterized by SEM,BET and XRD. The size of ZIF-8 decreases gradually from 1500 nm to 850 nm then to 250 nm,and the morphology changes from truncated hexahedron to truncated dodecahedron and finally to dodecahedron. The specific surface area of ZIF-8 nanoparticles with a particle size of 250 nm is 1730 m2/g,and the pore size and pore volume are 1. 5 nm and 0. 6 cm3/g,respectively. Therefore,it can be seen that ZIF-8 nanoparticles with a particle size of 250 nm have excellent carrier characteristics. The impregnation method was further adopted to synthesize the supported catalyst,and boron ammonia was used as the reducing agent. The ZIF-8（250 nm）nanoparticles were loaded with metals/precious metal nanoparticles in situ,the component optimization and catalytic performance were further studied. The obtained catalyst ZIF-8/Pt0. 002@Ni0. 2 shows excellent performance in hydrogen generation from aminoborane. © 2022, Science Press (China). All rights reserved.     

A Dodecahedrane-like Molecule C_（12）H_（12）B_8 with Uncommon T_h Symmetry

The molecule with Th symmetry is rare.A dodecahedrane-like molecule C12H12B8 with uncommon Th symmetry has been reported here.Density functional calculations and minimization techniques have been employed to characterize its structural and electronic properties.Its geometry,electronic properties,vibrational frequencies and heat of formation have been calculated at the B3LYP/6-311+G(d,p) level of theory.The absence of imaginary vibrational frequency confirms that it corresponds to true minimum on the potential energy hypersurface.Its vibrational bands in the IR intensity have been discussed and compared with future experimental identification.At the B3LYP/6-311+G(d,p) level,the heat of formation has been calculated to be 720.9 kJ mol-1 using the isodesmic reaction.According to this value,it is a potential high energy density molecule.     

Determination of Enantiomeric Excess of Glutamic Acids by Lab-made Capillary Array Electrophoresis

The techniques of combinatorial chemistry have recently been applied to the discovery of new asymmetric catalyst for a variety of organic transformations1-3. Using combina- torial methods, it is straightforward to generate thousands of potential asymmetri…     

Molecular-based conducting magnet

Molecular-based conducting magnet or magnetic conductor, is an overlap of organic conductor and molecular magnet. Due to the existence of ferromagnetism, antiferromagnetism and quantum magnetism in insulated charge-transfer salt, it becomes a common sense that magnetism is not good for conductivity. After the discovery of first molecular-based metallic ferromagnet, molecular-based conducting magnet with -unit from organic conductor and magnetism from coordination counterion became a hot area. The metallic ferromagnet, semiconductor room-temperature ferrimagnet, metallic weak ferromagnet and supercon-ducting antiferromagnet have been discovered. The new molecular-based conducting magnet with higher conductivity and higher magnetic ordering temperature is expected.     

8-羟基喹啉单体及二聚体质子转移反应的理论研究

Density functional theory （DFT） of quantum chemistry method was employed to investigate proton transfer reactions of 8-hydroxyquinoline （8-HQ） monomers and dimers. By studying the potential energy curves of the isomerization, the most possible reaction pathway was found. The total energy of 8-hydroxyquinoline was lower than that of quinolin-8（1H）-one, whereas the order was reversed in dimers. The findings explained the contrary experimental phenomena. The minimum reaction barrier of intramolecular proton transfer was 47.3 kJ/mol while that in dimer was only 25.7 kJ/mol. Hence it is obvious that proton transfer reactions of 8-HQ monomer have a considerable rate but it is easier to proceed for 8-HQ dimer than monomers. It implied that the hydrogen bond played an important role in depressing the activation energy of reaction. The mechanism of the tautomerization was discussed on the basis of theoretical results.     

A Facile Synthesis of Ethyl 2,4-Dimethoxy-6-perfluoroalkyl-benzoates via Acyclic Precursors

Introduction Polysubstituted arenes are important intermediates in synthetic medicines and dyestuffs, and the fluorinated analogues are more attractive as a result of their lipo-philicity and the increment of activity.1,2 Therefore, to study the convenient and efficient synthesis of polysub-stituted arenes is valuable in organic synthetic method-ology. We have designed a simple synthesis of fluori-nated polysubstituted arenes through the intramolecular Wittig reaction of a new phosphorous ylid…     

Synthesis and Crystal Structure of a Novel Complex [Ag(NIT3Py)_3]·(ClO_4)(H_2O)

1 INTRODUCTION Nitronyl nitroxide radicals (NITR), stable organic radicals, have played an important role in the design and synthesis of molecular magnetic materials[1, 2]. However, nitronyl nitroxide radicals are poor elec- tron-donor ligands and their coordination ability is limited. Recently, it has led to the development of functionalized nitronyl nitroxide radicals in which a strong coligand is incorporated. Due to the strong coordinate ability of nitrogen atom from pryidinyl ring,…     

APPLICATION OF THE SULFONATE ESTER GROUP AS A LINKER FOR SOLID PHASE ORGANIC SYNTHESIS

1. INTRODUCTIONIn recent years, solid phase organic synthesis (SPOS) has been increasingly used in the synthesis of small organic molecules [1]. The rapid development of SPOS brings with it the need for expanding a variety of linkers in order to accommodate new synthesis methods[2], and especially in the case of combinatorial chemistry, to allow additional diversity elements.Recently, Rueter and coworkers reported the use of a sulfonate ester as a linker in SPOS [3,4] and the compati…     

Studies on a Novel Characteristic Atom-pair Holographic Code Applied to Quantitative Structure-chromatographic Retention Relationship of Organic Compounds

1 INTRODUCTION Quantitative structure-chromatographic retention relationship (QSRR)[1], a method using the computer auxiliary means to perform simulation and predic- tion of organic compounds’ chromatographic reten- tion behavior, has been developed recently. In this process, the first step is how to effectively fetch the information of molecular structure, and transform it into a set of characteristic numeric codes, that is, the so-called molecular structure characterization(MSC). Ge…