Synthesis of P(AA‐SA)/ZnO composite latex particles via inverse miniemulsion polymerization and its application in pH regulation and UV shielding

Poly(acrylic acid‐co‐sodium acrylate)/zinc oxide, P(AA‐SA)/ZnO, composite latex particles were synthesized by inverse miniemulsion polymerization. The ZnO nanoparticles were prepared by hydrothermal synthesis and undergone oleic acid (OA) surface treatment. The X‐ray diffraction pattern and FT‐IR spectra characterized the crystal structure and functional groups of OA‐ZnO nanoparticles. An appropriate formulation in preparing P(AA‐SA) latex particles, ensuring the dominant in situ particle nucleation and growth, was developed in our experiment first. Sodium hydroxide was chosen as a costabilizer, because of its ability to increase the deprotonation of acylic acid and enhance the hydrophilicity of monomer, acrylic acid besides providing osmotic pressure. The growth mechanism of P(AA‐SA)/ZnO composite particles was proposed. The OA‐ZnO nanoparticles were adsorbed on or around the surface of P(AA‐SA) latex particles by hydrophobic interaction, thus enhanced the interfacial tension over latex particles. The P(AA‐SA)/ZnO composite latex particles owned better thermal stability than pure latex particles. The pH regulation capacity was excellent for both ZnO and P(AA‐SA) particles. Combining P(AA‐SA) and ZnO nanoparticles into composite particles, the performance in pH regulation and UV shielding was discussed from our experimental results. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8081–8090, 2008     

Fabrication of urchin‐like Ag/ZnO hierarchical nano/microstructures based on galvanic replacement mechanism and their enhanced photocatalytic properties

Urchin‐like Ag/ZnO hierarchical nano/microstructures have been synthesized through a facile low‐temperature hydrothermal growth method based on galvanic replacement mechanism. The experimental results show that the urchin‐like Ag/ZnO heterostructures are formed through the epitaxial growth of ZnO nanorods on the {111} facets of Ag nanoparticles along their own c‐axis. The photocatalytic properties of the products were evaluated by the degradation of RhB dye solution under ultraviolet irradiation, and the results show that the products exhibit significantly enhanced photocatalytic properties comparing with pure ZnO nanorods. The products with a Ag content of 35.64 atom % prepared with a Ag⁺ concentration in solution of 5 mM exhibit surprisingly high degradation rate (99.5%) for RhB dye solution (4 mg/L) after photocatalytic reaction for only 14 min under ultraviolet irradiation. The Schottky barrier formed at the metal‐semiconductor interfaces improves the segregation of charges and prevents the charge recombination, and thus significantly enhances the photocatalytic activities of the products. On the other hand, the high stability of the urchin‐like Ag/ZnO hierarchical nano/microstructures can effectively prevent the aggregation of nanostructures with simultaneously preserving high photocatalytic properties due to the existence of nanosized unites. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of ZnO nanoparticle‐reinforced polyamide 6 composite by in situ‐coproduced method and their properties

Polyamide 6/ZnO nanocomposites (noted as PA6/ZnO) were prepared by an in situ co‐producing method, during which Zn₂(OH)₂CO₃ decomposed into nano‐ZnO in the process of the opening‐ring polymerization of caprolactam at high temperature. Transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, and differential scanning calorimetry were used to analyze the size and dispersive properties of nano‐ZnO, the crystallization and melting properties, the thermal properties, and crystal structure of PA6/ZnO composite, respectively. The results showed that the nano‐ZnO derived from Zn₂(OH)₂CO₃ via in situ polymerization of PA6‐ZnO was uniformly dispersed in PA6 matrix. However, the overall nano‐ZnO crystallization rate and crystal size in the PA6 matrix were hindered by the bulky PA6 molecular chains. The mechanical properties were evaluated using universal tensile and impact testing instruments. The results revealed that PA6/ZnO composite with 0.2% nano‐ZnO content possessed excellent tensile strength, enhanced by 75% in comparison with the pure PA6. The nano‐ZnO had little influence on the impact strength of PA6. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 165–170     

Poly(acrylonitrile) ultrafiltration membranes. I. Polymer‐salt‐solvent interactions

Fourier transform infrared spectroscopy was used to study the interactions among LiCl, ZnCl₂, and AlCl₃ with N,N‐dimethylformamide (DMF) and poly(acrylonitrile) (PAN). It was observed that all three salts complex with DMF as well as PAN. The strength of the cation interaction with the >C?O oxygen of DMF was found to be higher than that with the ? CN group of PAN. The >C?O stretching frequency of DMF with ZnCl₂ was red shifted, indicating stronger complex formation compared with other two cations. With the addition of salt, the salt–DMF pseudo solvent was found to become a θ solvent for PAN compared with neat DMF. This change in PAN solvation power was primarily the result of DMF–salt complexation. As a result of the complexation, Mark‐Houwink constant a, was found to reduce from 0.75 (for pure DMF) to ～0.6 for DMF–salt solvents, indicating decreased PAN chain expansion. Comparison of intrinsic viscosity [η] values indicated that addition of salts to PAN–DMF solutions resulted in: (i) decrease in the DMF solvation power, which causes less expanded polymer coils, and (ii) increased interpolymer chain entanglements via salt‐promoted chain association. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2061–2073, 2005     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

Enhanced Photocatalytic Performance of ZnO Nanorods Coupled by Two‐Dimensional α‐MoO3 Nanoflakes under UV and Visible Light Irradiation

We exploit the utilization of two‐dimensional (2D) molybdenum oxide nanoflakes as a co‐catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α‐MoO₃ were synthesized through a sonication‐aided exfoliation technique. The 2D MoO₃ nanoflakes can be further converted to substoichiometric quasi‐metallic MoO_3?x by using UV irradiation. Subsequently, 1D–2D MoO₃/ZnO NR and MoO_3?x/ZnO NR composite photocatalysts have been successfully synthesized. The photocatalytic performances of the novel nanosystems in the decomposition of methylene blue are studied by using UV‐ and visible‐illumination setup. The incorporated 2D nanoflakes show a positive influence on the photocatalytic activity of the ZnO. The obtained rate constant values follow the order of pristine ZnO NR<MoO₃/ZnO NR<MoO_3?x/ZnO NR composites. The enhancement of the photocatalytic efficiency can be ascribed to a fast charge carrier separation and transport within the heterojunctions of the MoO₃/ZnO NRs. In particular, the best photocatalytic performance of the MoO_3?x/ZnO NR composite can be additionally attributed to a quasi‐metallic conductivity and substoichiometry‐induced mid‐gap states, which extend the light absorption range. A tentative photocatalytic degradation mechanism was proposed. The strategy presented in this work not only demonstrates that coupling with nanoscale molybdenum oxide nanoflakes is a promising approach to significantly enhance the photocatalytic activity of ZnO but also hints at new type of composite catalyst with extended applications in energy conversion and environmental purification.     

Preparation and Characterization of Transparent and UV‐Shielding Epoxy/SR‐494/APTMS/ZnO Nanocomposites with High Heat Resistance and Anti‐Static Properties

This research is to develop transparent and UV‐shielding Epoxy/SR‐494/APTMS/ZnO nanocomposite materials with high heat resistant and anti‐static properties. Firstly, the APTMS (3‐(acryloxypropyl)trimethoxysilane) performs the silanol intermediates by hydrolysis in pH 4～5 acid solution. The inorganic anti‐static fillers of powder ZnO can be successfully coupled and crosslinked to Epoxy/SR‐494 organic matrixes with these silanols of APTMS coupling agents. The remained active ‐OH functional groups of the APTMS/ZnO complexes can network bonding with epoxy prepolymers. Therefore, the Epoxy/APTMS/ZnO complexes with good anti‐static composites will be successfully prepared. Finally, in order to improve the thermal resistant and mechanical properties, the polyfunctionalized SR‐494 (pentaery‐thritol tetracrylate) acrylate monomers and the Epoxy/APTMS/ZnO composites are chain polymerized to form an excellent cross‐linking structure of organic/inorganic nanocomposites. The chemical bonding formation and the best weight contents of reaction components are identified by FT‐IR spectra. The thermal resistance, transparence, surface electric resistance, and hardness of these nanocomposites are measured by TGA, DSC, UV‐Visible, surface resistant meter, and pencil hardness tester respectively. Experimental results show that these nanocomposites have 90% transmittance and the best Td value is 389.3 °C which is 109.0 °C and 78.6 °C higher than those of pure epoxy resin and pure SR‐494 acrylate resin respectively. The glass transition temperature is not detected below 200 °C. The surface electric resistances of Epoxy/SR‐494/APTMS/ZnO hybrid thin films are decreased from 3.14 × 10¹³ to 5.13 × 10⁷ Ω/cm². The hardness of these nanocomposites is as high as 8H, and those hybrid films have high UV‐shielding properties. The morphology structures of the hybrid thin films are estimated by SEM. The results show that the optical thin films are evenly distributed with inorganic colloidal particles and the average particle size of these nanocomposites is 45～80 nm, while the powder ZnO (particle size: 2～5 μm) was used as inorganic filler.     

Hydrothermal Growth of Ag‐Doped ZnO Nanoparticles on Electrospun Cellulose Nanofibrous Mats for Catechol Detection

We fabricated a novel hierarchical composite mat composed of electrospun cellulose nanofibers decorated with Ag‐doped ZnO (Ag‐ZnO) nanoparticles and further demonstrated its potential application as the efficient laccase (Lac) biosensor substrate material. The cyclic voltammograms revealed that the Ag‐ZnO/cellulose nanofibrous mat provided an excellent microenvironment for Lac immobilization and benefited direct electron transfer of Lac. The fabricated Lac/Ag‐ZnO/cellulose/GCE exhibited a highly sensitive detection of catechol with a wide linear range from 0.995 to 811 µM and a low detection limit of 0.205 µM. The results indicated that Ag‐ZnO/cellulose nanofibers were the promising nanostructured materials for the construction of different biosensors.     

Controllable synthesis of novel sandwiched polyaniline/ZnO/polyaniline free‐standing nanocomposite films

Controllable synthesis of novel sandwiched polyaniline (PANI)/ZnO/PANI free‐standing nanocomposite films is reported via spin coating of ZnO quantum‐dot interlayer on PANI base layer and then PANI surface layer on the ZnO interlayer. The thickness of the ZnO interlayer and the PANI surface layer can be easily controlled by adjusting spin time and spin speed, respectively. The effects of the ZnO interlayer thickness and the PANI surface layer thickness are examined in detail on the photoluminescence (PL) property. It is worth noting that coverage of the PANI surface layer on the ZnO interlayer can not only lead to great enhancement in the PL property but also to a maximum PL intensity at a medium PANI surface layer thickness. This maximum PL property is caused by the combined ZnO/PANI carrier transportation and PANI shielding effects. In addition, the nanocomposite films show reasonably good conductivity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ag/ZnO Catalysts with Different ZnO Nanostructures for Non‐enzymatic Detection of Urea

Silver coated ZnO nanorods and nanoflakes with different crystallographic orientations were synthesized by a combination of sputter deposition and solution growth process. Catalytic properties of morphology‐dependent Ag/ZnO nanostructures were then investigated for urea sensors without enzyme. Ag/ZnO nanorods on carbon electrodes exhibit a higher catalytic activity and an improved efficiency than Ag/ZnO nanoflakes on carbon electrodes. Ag/ZnO nanorod catalysts with more electrochemically surface area (169 cm² mg^?1) on carbon electrode facilitate urea electrooxidation due to easier electron transfer, which further promotes the urea electrolysis. The Ag/ZnO nanorod catalysts also show a significant reduction in the onset voltage (0.410 V vs. Ag/AgCl) and an increase in the current density (12.0 mA cm^?2 mg^?1) at 0.55 V vs Ag/AgCl. The results on urea electrooxidation show that Ag/ZnO nanostructures can be a potential catalyst for non‐enzymatic biosensors and fuel cells.     

Controlled Orientation in a Bio‐Inspired Assembly of Ag/AgCl/ZnO Nanostructures Enables Enhancement in Visible‐Light‐Induced Photocatalytic Performance

In a bio‐inspired approach, polyamine‐mediated mineralization of ZnO was explored to develop an environmentally benign methodology for synthesizing Ag/AgCl/ZnO nanostructures. The assembling properties displayed by the polyamines to create composite structures was utilized to have the nanocomponents effectively interact with each other in a way that is desirable for the application envisaged. The polyamines, which act as a mineralizing agent for ZnO nanoparticles, also facilitate the formation of Ag/AgCl within ZnO under ambient conditions. Thus synthesized Ag/AgCl/ZnO nanostructures represent a multi‐heterojunction system in which the nanocomponents lead in a synergistic way to enhancement in the photocatalytic activity under visible‐light irradiation.     

Click‐chemistry of polymersomes on nanoporous polymeric surfaces

A facile click chemistry method of immobilizing surface‐functionalized polymer vesicles on casted polymeric PAN substrates is described. Microporous PAN membranes were subjected to hydrochloric acid hydrolysis to obtain surface carboxylates. The carboxylic groups were activated with EDC/NHS‐solution and were then reacted with propargylamine to introduce alkyne groups for CuAAC reactions. The alkyne functionality of the modified membrane surface was verified by reaction with an azide functional click dye both before and after the immobilization of azide‐functionalized ABA vesicles. The efficient postfunctionalization of the membrane with alkyne allowed quantitative coverage of the membrane surface with a polymersome monolayer, as confirmed by immobilization of polymerzomes loaded with a fluorescent dye. Polymersome monolayers immobilized on alkyne functionalized PAN‐membranes were characterized by cryo‐SEM and monolayers were confirmed by atom force microscopy. These methods opens up new avenues for preparing membrane based filtration and sensor technologies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2032–2039     

Samarium powder as catalyst for SET‐LRP of acrylonitrile in 1,1,1,3,3,3‐hexafluoro‐2‐propanol for control of molecular weight and tacticity

Samarium powder was applied as a catalyst for single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) with 2‐bromopropionitrile as initiator and N,N,N′,N′‐tetramethylethylenediamine as ligand. First‐order kinetics of polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion, and the highly syndiotactic polyacrylonitrile (PAN) obtained indicate that the SET‐LRP of AN could simultaneously control molecular weight and tacticity of PAN. An increase in syndiotacticity of PAN obtained in HFIP was observed compared with that obtained by SET‐LRP in N,‐N‐dimethylformamide (DMF). The syndiotacticity markedly increased with the HFIP volume. The syndiotacticity of PAN prepared by SET‐LRP of AN using Sm powder as catalyst in DMF was higher than that prepared with Cu powder as catalyst. The increase in syndiotacticity of PAN with Sm content was more pronounced than the increase in its isotacticity. The block copolymer PAN‐b‐polymethyl methacrylate (52,310 molecular weight and 1.34 polydispersity) was successfully prepared. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and hyperpolarizability measurements of main‐chain azobenzene molecules

A series of new AB type azobenzene monomers based on various substituted phenols and higher order fused/extended aromatic rings were synthesized and their hyperpolarizability tensor β determined by hyper‐Rayleigh scattering (HRS) measurement in methanol. The electron donor (? OH) and acceptor units (? COOH) were kept constant in the series, but the effective conjugation length was varied by varying the number and position of substituents as well as the number of aromatic rings. The effect of substitution of the phenolic ring on the β value was investigated and it was found to range from 15 × 10^?30 to 42 × 10^?30 esu. The effect of intramolecular hydrogen bonding on the nonlinear optical (NLO) property was also examined. The nonlinearity was in the following order of phenol derivative: α‐naphthol > phenyl phenol > 2,6‐dimethyl phenol > o‐cresol > cardanol > phenol > β‐naphthol. The unusually low values for the β‐naphthol‐based chromophore compared with its isomer (α‐naphthol) could be rationalized based on hydrogen bonding of the o‐hydroxyl group with the β nitrogen of the azo bridge. These azobenzene NLO chromophoric monomers were polymerized to form main‐chain polymers with a head to tail structure. The polymers had high thermal stability and rather low solubility in common organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4455–4468, 2005     

Small‐angle X‐ray scattering investigation of carbon nanotube‐reinforced polyacrylonitrile fibers during deformation

Structural changes during deformation in solution‐ and gel‐spun polyacrylonitrile (PAN) fibers with multi‐ and single‐wall carbon nanotubes (CNTs), and vapor‐grown carbon nanofibers were investigated using synchrotron X‐ray scattering. Previously published wide‐angle X‐ray scattering (WAXS) results showed that CNTs deform under load, alter the response of the PAN matrix to stress, and thus enhance the performance of the composite. In this article, we find that the elongated scattering entities that give rise to the small‐angle X‐ray scattering (SAXS) in solution‐spun fibers are the diffuse matrix‐void interfaces that follow the Porod's law, and in gel‐spun fibers these are similar to fractals. The observed smaller fraction of voids in the gel‐spun fibers accounts for the significant increase in the strength of this fiber. The degree of orientation of the surfaces of the voids is in complete agreement with those of the crystalline domains observed in WAXS, and increases reversibly upon stretching in the same way as those of the crystalline domains indicating that the voids are integral parts of the polymer matrix and are surrounded by the crystalline domains in the fibrils. The solution‐spun composite fibers have a larger fraction of the smaller (<10 nm) voids than the corresponding control PAN fibers. Furthermore, the size distribution of the voids during elongation changes greatly in the solution spun PAN fiber, but not so in its composites. The scattered intensity, and therefore the volume fraction of the voids, decreases considerably above the glass transition temperature (T_g) of polymer. Implications of these observations on the interactions between the nanotubes and the polymer are discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2394–2409, 2009     

Embryotoxicity studies of tri‐n‐butyltin(IV) complexes of 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl] benzoic acid on sea urchin development

The toxicity studies of free 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoic acid and 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl]benzoic acid and their tri‐n‐butyltin(IV) complexes were evaluated by using sea urchin early developmental stages as recommended model organisms for toxicity tests. The novel complexes, as the parent tri‐n‐butyltin(IV) chloride (TBTCl), caused mitosis block and induced high embryonic mortality in sea urchin. Copyright © 2005 John Wiley & Sons, Ltd.     

Dependence of methanol permeability on the nature of water and the morphology of graft copolymer proton exchange membranes

Novel polymers with controlled microstructures were prepared and studied to further advance the understanding of structure–property relationships of proton conducting membranes. PAN‐g‐macPSSA membranes, which contained poly(styrenesulfonic acid) (PSSA) grafts of defined graft length, are compared with PVDF‐g‐PSSA membranes, prepared by radiation‐grafting, and Nafion® 117. The intrinsic properties of PAN‐g‐macPSSA membranes are insensitive to the macromonomer graft length but are highly dependent on the ion exchange capacities (IEC). Increasing the IEC increases the content of free water absorbed by the membrane. Self‐diffusion coefficients of water in water‐swollen PAN‐g‐macPSSA were found to be similar to that of N117, despite PAN‐g‐macPSSA's higher water content. Of the polymers studied, PAN‐g‐macPSSA exhibited the lowest methanol permeability, which is explained on the basis of it containing a more tortuous ionic network. Methanol permeability decreased with decreasing volume of free water. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2240–2252, 2006     

In Situ Photocatalytically Heterostructured ZnOAg Nanoparticle Composites as Effective Cathode‐Modifying Layers for Air‐Processed Polymer Solar Cells

A heterostructured semiconductor–metal ZnO?Ag nanoparticle (NP) composite was constructed through a straightforward photocatalytic strategy by using UV irradiation of ZnO NPs and an aqueous solution of Ag precursor. The ZnO?Ag NP composites serve as an effective cathode‐modifying layer in polymer solar cells (PSCs) with increased short‐circuit current density owing to the light‐trapping effect, and improved optical and electrical conductivity properties compared with pure ZnO NPs. The Ag NPs, which are photodeposited in situ on ZnO NPs, can act as effective antennas for incident light to maximize light harvesting and minimize radiative decay or nonradiative losses, consequently resulting in the enhanced photogeneration of excitons in PSCs. Systematic photoelectron and ‐physical investigations confirm that heterostructured ZnO?Ag NPs can significantly improve charge separation, transport, and collection, as well as lower charge recombination at the cathode interface, leading to a 14.0 % improvement in air‐processed device power conversion efficiency. In addition, this processable, cost‐effective, and scalable approach is compatible with roll‐to‐roll manufacturing of large‐scale PSCs.     

Fabrication of zinc oxide nanowires/polymer composites by two‐photon polymerization

We present an approach to fabricate ZnO nanowires/polymer composite into three‐dimensional microstructures, based on two‐photon polymerization direct laser writing, a fabrication method that allows submicrometric spatial resolution. The structural integrity of the structures was inferred by scanning electron microscopy, while the presence and distribution of ZnO nanowires was investigated by energy dispersive X‐ray, Raman spectroscopy, and X‐ray diffraction. The optical properties of the produced composite microstructures were verified by imaging the characteristic ZnO emission using a fluorescence microscope. Hence, such approach can be used to develop composite microstructures containing ZnO nanowires aiming at technological applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 333–337     

Preparation of composited Nano‐TiO2 and its application on antimicrobial and self‐cleaning coatings

Composite nano‐TiO₂ with doping Fe³⁺ and Ag was prepared, and further modified by 3‐methacryloxypropyltrimethoxysilane. They were characterized by Zetasizer Nano ZS Particle and Zeta Potential Analyzer, X‐ray diffraction, UV–Vis spectrophotometer, FT–IR spectra, and transmission electron microscopy. The modified composite nano‐TiO₂ was applied to prepare multifunctional fluorocarbon coatings (FCC). Antibacterial activity of multifunctional FCC containing modified composite nano‐TiO₂ was investigated. Its photocatalytic antibacterial activity reached 92%. The influence of doping ingredients, amount of composite nano‐TiO₂, different light houses, or surface modification was discussed. The surface of FCC cannot be easily smirched by oiliness, dust or water because of hydrophobic fluorosilicone emulsion. It would be an available modern interior building coating for its remarkable photocatalytic antibacterial property as well as self‐cleaning function. Copyright © 2009 John Wiley & Sons, Ltd.