X-射线衍射法测定尼龙1010结晶度

根据X-射线散射强度理论,使用图解多重峰方法对尼龙1010三个结晶峰及非晶峰的衍射强度进行校正,首次导出了尼龙1010结晶度计算公式,所得结果与密度及量热测定结果具有很好可比性。     

多晶X射线衍射测量结果的一些影响因素

讨论了多晶X射线衍射测量中实验结果的一些影响因素.分别对粉末样品自身颗粒的大小、粉末装填到样品架中所处的表面平整度以及少量样品采用横式填充还是竖式填充等问题进行了分析和探讨.结果表明,在X射线衍射分析测量中,要想得到理想的衍射数据,试样颗粒应小于50μm,而且装填后样品与样品架表面保持平齐,对少量或微量试样应采取横式填充法.     

尼龙-1010结晶结构

用WAXD方法测定了Nylon-1010为三斜晶系结晶结构;α=4.9(?),b=5.4(?),c=27.8(?),α=49°,β=77°,γ=63.5°,每个聚合物单胞含有一个重复单元,空间群为P(?)。模压试样用Ruland方法分析结晶度为60％。以上。电子密度相关函数法分析了SAXS现象,求得了Nylon-1010结晶片层厚度、过渡层厚度、长周期、比内表面及电子密度差。     

可分散性纳米SiO2/尼龙1010复合材料的结晶行为

采用熔融共混法制备了可分散性纳米SiO2/尼龙1010复合材料.通过X射线衍射和差示扫描量热法对尼龙1010及其复合材料的结晶行为进行了研究.结果表明,SiO2的加入作为结晶的异相成核点,使复合材料的结晶温度升高,熔融温度降低,使其结晶度稍有降低;SiO2的加入并没有改变尼龙1010的结晶形态,只是使尼龙1010的晶格尺寸发生了一定程度的改变.     

尼龙1010结构的研究

本工作通过X-光衍射、红外光谱、示差扫描量热、偏光显微镜、粘弹谱及密度观测,考察了尼龙1010样品,分别从玻璃态结晶与从熔融态结晶后的聚集态结构,发现它的结晶结构与尼龙66相似,但从熔融态结晶的晶格有很大畸变,对所涉及的问题进行了讨论,提出了氢键面畸变的模型。     

尼龙1010盐固态缩聚反应的研究

采用测定转化率和分子量、红外光谱、X-射线衍射分析、元素分析、偏光显微镜和扫描电镜等方法研究了结晶尼龙1010盐的特性、尼龙1010盐固态缩聚反应的动力学及其相应的晶体结构形态,用DSC法探讨了其反应机理。     

THE INFLUENCE OF HEAT TREATMENT ON STRUCTURES OF THE AGGREGATED STATE OF POLYAMIDE-1010

The structural parameters of the aggregated state of polyamide (PA)-1010 annealedat various temperatures were computed by means of the desmearing intensity from SmallAngle X-ray Scattering (SAXS) measurements and by using the concept of the distance dis-tribution function. The results indicated that the structural parameters of the aggregatedstate were strongly dependent upon heat treatment conditions and the maximum valuesof the structural parameters were obtained for the samples annealed at T = 175℃. Theparticle size Z annealed at different temperature was ranged between 8.1--12.8nm, and thevalues of the distance distribution function P_(max)(Z) were obtained when Z = 4.0--6.8nm.Using one dimension electron density correlation function (1D EDCF) method long period(L) and thickness of the lamellar (d_0) were estimated and were found to increase with theincrease of the degree of crystallinity.     

STUDIES ON THE HYDROGENATION OF METHYL ACRYLATE CATALYZED BY Pd/DVB CROSSLINKED POLY-(N-VINYL PYRROLIDONE)

Many kinds of dispersed Pd (0) supported on cross-linked poly (N-vinyl pyrrolidone) were prepared and characterized by IR and X-ray diffraction. Their hydrogenation properties of methyl acrylate have been examined. Experimental results indicate that the hydrogenation rate will reach a maximum as the degree of crosslinking increases to a certain point. The catalytic activity of the catalysts is closely related to the preparation condition and the particle size of Pd of the catalysts. Some other factors which affect the catalytic properties have also been studied.     

Preparation of Ultrafine Cobalt Powder by Chemical Reduction in Aqueous Solution

IntroductionThe preparation of ultrafine metal powders has been extensively studied in past years due to their scientific interests and potential applications1. Ultrafine particles exhibit novel material properties that differ from those of the bulk solid state because of the size effect2-4. In particular, ultrafine cobalt powders have many important industrial applications. They are commonly used in alkaline rechargeable batteries, magnetic recording media, heterogeneous catalysis, and especi…     

A Simple Microwave Method for Synthesis of CdS Nanoparticles

In this work a surfactant-free microwave method for preparation of CdS nanoparticles is reported. The effect of different parameters i.e. time and irradiation power, sulfur source and solvent on the morphology and the samples particle size have been investigated. The synthesized nanostructures were characterized by X-ray diffraction, energy-dispersive X-ray analysis, scanning electron microscopy, Fourier transform infrared, photoluminescence and ultraviolet–visible spectroscopy.     

Characterization of defects and surface structures in microporous materials by HRTEM, HRSEM, and AFM.

High-resolution transmission (HRTEM) and high-resolution scanning electron microscopy as well as atomic force microscopy (AFM), X-ray diffraction, and electron diffraction were used for studying the zeolites MFI, MEL, and the MFIMEL intergrowth system. All three zeolites consisted of individual particles having a size in the range of approximately 0.5 m to 5 m. The particle habits varied from rather cubelike to almost spherelike with many intermediate habits. Typically, the particles of these three zeolites were assembled by many individual blocks that differed in the dimension from about 25 nm to 140 nm as well as in the shape from very frequently almost rectangular (for MFI, MEL, and MFIMEL) to sometimes roundish or irregular habits (mainly for MFIMEL). An estimate shows that some 104 up to more than 106 densely packed blocks typically may assemble each individual zeolite particle or, related to the corresponding unit cell dimension, about 108 up to 1010 unit cells. The fine surface structure of zeolite particles was terracelike with steps between adjacent terraces typically in the range of 20 nm to 60 nm; the minimum step measured was approximately 4 nm. A detailed study of the surface topography was performed by AFM, detecting organic molecules at the block intersections. The presence of topological defects was observed by HRTEM and electron diffraction.     

A new method of direct synthesis of bimetallic phases: Silica supported Pd---Cu catalysts from mixed acetylacetonates

The direct synthesis on a silica support of well defined, crystalline, mixed Pd---Cu bis-acetylacetonates has been achieved and the structure of these new compounds was determined by powder X-ray diffraction. These clusters have been deposited on a silica support and their thermal decomposition under helium was followed by in situ X-ray diffraction, thermo-gravimetry and mass spectroscopy. Microcrystalline metallic alloys with a narrow distribution of composition and particle size in the 2–4 nm range are obtained. Infrared experiments of CO chemisorption confirm the homogeneity of composition of the particles but conclude to a partial coverage of palladium by copper.     

Preparation, characterization and ESR studies of bulk and nano sized pyrochlore La2-xGdxZr2O7 (x=0.025, 0.05, 0.075 and 0.1)

Bulk and nano sized pyrochlore of composition La(2-x)Gd(x)Zr(2)O(7) (x=0.025, 0.05, 0.075 and 0.1) have been prepared by sol-gel method. They are characterized by powder X-ray diffraction and infrared spectroscopy. The sintering temperature influences the particle size of the sample. The room temperature powder ESR of La(1.95)Gd(0.05)Zr(2)O(7) gave characteristic "U" spectrum. The influence of particle size on the ESR of Gd(3+) is investigated. Possible reason for the disappearance of "U" spectrum with increase in the particle size is given.     

Thermal, structural, magnetic and photoluminescence studies on cobalt ferrite nanoparticles obtained by citrate precursor method

Magnetic nanoparticles of cobalt ferrite have been synthesized by citrate precursor method. TG-DSC studies have been made to get the idea of the optimum temperature of annealing that could lead to the formation of nanoparticles. Annealing the citrate precursor was done at 450, 650, and 973?°C. The X-ray diffraction (XRD) studies and the scanning electron microscopy (SEM) have been used for characterization. The data from vibrating sample magnetometer and photoluminescence spectrometer (PL) have been analyzed for exploring their applications. Using the Scherrer formula, the crystallite size was found to be 25, 32, and 43?nm, respectively, using the three temperatures. The particle size increased with annealing temperature. Rietveld refinements on the X-ray (XRD) data were done on the cobalt ferrite nanoparticles (monoclinic cells) obtained on annealing at 650?°C, selecting the space group P2/M. The values of coercivity (1574.4?G) and retentivity (18.705?emu g^?1) were found out in the sample annealed at 650?°C while magnetization (39.032?emu g^?1) was also found in the sample annealed at 973?°C. The photoluminescence (PL) property of these samples were studied using 225, 330, and 350?nm excitation wavelength radiation source. The PL intensity was found to be increasing with the particle size.     

Synthesis and Soft Magnetic Properties of Mg-doped Ni Nanoparticles

Mg-doped Ni nanoparticles with good soft magnetic properties were prepared with the sol-gel method and were sintered at 400, 500, 600, and 900℃ in argon atmosphere, respectively. The structure and magnetic properties of the samples were studied by means of X-ray diffraction, TEM, and VSM magnetometers. X-Ray powder diffraction results show that Ni-Mg solid solution was formed with the single phase of face-centered cubic（fcc） structure. The particle size became larger with the increase of temperature. When the sintering temperature was 400 °C, the particle size was 6.3 nm, whereas it was 46.2 nm at 900 °C. Both the saturation magnetization（Ms） and the coercivity were enhanced with the increase of the particle size. The Ms values of the samples ranged from 18.965 to 46.766 emu/g and the coercivity ranged from 1051.3568 to 9145.0848 A/m.     

固态缩聚尼龙1010的熔化行为

本工作借助示差扫描量热法和X-射线衍射分析法(WAXD)首次研究了固态缩聚反应所得初生态尼龙1010的结晶特征和熔化行为。实验结果表明:固态缩聚反应的温度和时间以及产物分子量对初生态尼龙1010的熔化行为有着明显的影响。初生态尼龙1010结晶熔融双峰的显隐与其X-射线衍射峰特征没有明显的依赖关系,但随着尼龙大分子结晶的完善化而出现表观体积收缩观象。     

Relaxometric and magnetic characterization of ultrasmall iron oxide nanoparticles with high magnetization. Evaluation as potential T1 magnetic resonance imaging contrast agents for molecular imaging

Here we report on the synthesis of ultrasmall gamma-Fe2O3 nanoparticles (5 nm) presenting a very narrow particle size distribution and an exceptionally high saturation magnetization. The synthesis has been carried out by decomposition of an iron organometallic precursor in an organic medium. The particles were subsequently stabilized in an aqueous solution at physiological pH, and the colloidal dispersions have been thoroughly characterized by complementary techniques. Particular attention has been given to the assessment of the mean particle size by transmission electron microscopy, X-ray diffraction, dynamic light scattering, magnetic, and relaxometric measurements. The good agreement found between the different techniques points to a very narrow particle size distribution. Regarding the magnetic properties, the particles are superparamagnetic at room temperature and present an unusually high saturation magnetization value. In addition, we describe the potential of these particles as specific positive contrast agents for magnetic resonance molecular imaging.     

Effect of cobalt weight content on the structure and catalytic properties of Co/CNT catalysts in the fischer–tropsch synthesis

Cobalt-based Fischer–Tropsch synthesis (FTS) catalysts containing 1 to 40 wt % cobalt supported on multi-walled carbon nanotubes (CNTs) have been investigated. The CNTs have been characterized by low-temperature nitrogen adsorption, scanning electron microscopy, and X-ray photoelectron spectroscopy. All catalysts have been prepared by impregnating, with an ethanolic solution of cobalt nitrate, the CNTs preoxidized with concentrated nitric acid and have been tested in the FTS at 220°C and atmospheric pressure. Correlations have been established between the cobalt weight content of the catalyst and the Co particle size determined by transmission electron microscopy and X-ray diffraction. The Co content and particle size have an effect on the activity and selectivity of the catalyst and on the target fraction (C₅₊) yield in the FTS. The highest CO conversion is observed for the catalyst containing 20 wt % Co; the highest selectivity and activity, for the catalyst containing 5 wt % Co; the highest C₅₊ yield, for the catalyst containing 10 wt % Co.     

Synthesis and Characterizations of Copper Oxide Nanoparticles Within Zeolite Y

Copper oxide nanoparticles within zeolite Y have been synthesized by a procedure comprising (i) ion-exchange of copper ions into the zeolite, (ii) precipitation of copper ions with sodium hydroxide within the supercages of the zeolite, and (iii) calcination. The products were characterized by X-ray diffraction, scanning electron microscope, energy-dispersive X-ray spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The particle size of CuO products are 20?nm.     

小角光散射在线系统研究多相聚合物双螺杆挤出过程中的相尺寸--非相容PE/PA1010体系

利用可视化双螺杆挤出机———光散射在线采集与分析系统对不相容聚合物体系聚乙烯 尼龙 10 10(PE PA10 10 )双螺杆挤出过程进行了在线分析 .相尺寸由Debye理论中的相关距离ac,平均弦长L ,以及分散相平均直径D描述 ,给出了几种参数表征适用的范围 .由在线光散射计算出的平均弦长Lscatt、分散相平均粒径Dscatt与电镜照片计算出的平均弦长LSEM 、分散相平均粒径DSEM 作了比较 ,两者比较符合 .结果表明 ,分散相颗粒尺寸沿螺杆挤出方向逐渐变小 ;随着低组分含量 (PA10 10≤ 5 0 % )的增加 ,分散相颗粒尺寸变大 ,在组成比为 70 30和 6 0 4 0时出现双连续相