X-射线衍射法测定尼龙1010结晶度

根据X-射线散射强度理论,使用图解多重峰方法对尼龙1010三个结晶峰及非晶峰的衍射强度进行校正,首次导出了尼龙1010结晶度计算公式,所得结果与密度及量热测定结果具有很好可比性。     

尼龙-1010非等温结晶动力学

<正> 尼龙-1010是我国独创的工程塑料品种,已被较广泛地应用于精密机械零件、仪表制造、家用电器、航空等方面。有关尼龙-1010的基础研究大多在我国学者中间进行,由于在实际加工生产过程中,如通常的融熔纺丝、注射、模压等工艺均是在非等温条件下进行,有关它的非等温结晶动力学尚未见报道,本文用几种理论方法对尼龙-1010的非等温结晶动力学过程进行研究。     

X-RAY SCATTERING STUDIES ON NYLON-1010

From Wide-Angle X-ray Scattering (WAXS) pattern of uniaxially orientated fibers, the crystal structure of Nylon-1010 was determined. The Nylon-1010 crystallizes in the triclinic system, with lattice dimensions: a=4.9A, b=5.4A, c=27.8, α=49 °, β=77 °,γ=63.5 °, the unit cell contains one monomeric unit and the space group is P. The degree of crystallinity of polymer was deter mined as about 60%, using Ruland's method.The structures of Nylon-1010 with different draw ratio have been investigated by using Small-Angle X-ray Scattering (SAXS). The results indicate that the draw ratio of samples has a significant effect on microstructure of Nylon-1010. The long period and thickness of amorphous layer obviously increase but the invariant, average lameUar and interphase zone show almost independent of draw ratio, long period increases because amorphous layer increases with draw ratio. The electron density fluctuation values increased with draw ratio, but inner surface O_s is drecreased.     

结晶聚合物的中间层甲苯和辛烷萃取聚乙烯样品的研究

采用不同实验方法：ＳＡＸＳ、ＮＭＲ和激光Ｒａｍａｎ光谱。对甲苯和辛烷萃取的聚乙烯样品的中间层及其它结晶结构参数进行了研究，结果表明三种方法测得的中间相厚度有所不同，但均反映出辛烷萃取的聚乙烯样品中间层厚度比甲苯萃取的大。从测试和计算结果得出，中间层厚度与其它结构参数相比不可忽略。结晶聚合物结构以“三相模型”代替传统的“两相模型”可望逐渐被人们接受。     

聚氧化乙烯和聚醋酸乙烯酯共混热力学参数的理论估算

实验测定了聚氧化乙烯（ＰＥＯ）和聚醋酸乙烯酯（ＰＶＡｃ）的共混热以及共混组分的热压系数和热膨胀系数．并由上述实测值计算了状态方程参数．用Ｈａｍａｄａ~［１－２］等改进的Ｆｌｏｒｙ状态方程理论估算了ＰＥＯ／ＰＶＡｃ混体系的交换能参数（Ｘ_１２）、相互作用参数（ｘ_１２／ｒ_１）和剩余混合体积（Ｖ~Ｅ／Ｖ~０）．     

热处理对尼龙1010结构影响研究

采用ＷＡＸＤ，ＳＡＸＳ方法研究了热处理对尼龙１０１０聚集态结构的影响．结果表明，在温度为１７５℃左右对样品进行退火处理可获得较完善的结晶．利用Ｗｃ．ｘ~Ｔ关系曲线外推法得到尼龙１０１０样品的Ｔｇ大约为５８℃．根据一维电子密度相关函数法求得了系列样品在所研究条件下的结晶片层厚，过渡层厚，长周期和结晶非晶相间的密度差．得到了不同退火条件尼龙１０１０样品的结晶相密度ρｃ．     

THE DEGREE OF CRYSTALLINITY OF NYLON-1010 BY WAXD

Based on the X-ray scattering intensity theory and using the atomic scattering factorapproximate expression,the correction factors for three main crystalline peaks and an amorphouspeak of Nylon-1010 were calculated and the formula of degree of crystallinity of Nylon-1010 wasderived by graphic multipeak resolution method. The results calculated are compatible with the density measurement and calorimetry.     

方差-范围函数法求低密度聚乙烯/乙烯-丙烯-辛烯-1共聚物的共混体系次晶结构

将方差-范围函数法应用于共混体系中,求得了LDPE/EPO共混体系的(110)和(200)晶面的微晶大小和点阵畸变参数.微晶大小和点阵畸变参数值随EPO组份含量的增加基本呈下降趋势.     

THE INFLUENCE OF HEAT TREATMENT ON STRUCTURES OF THE AGGREGATED STATE OF POLYAMIDE-1010

The structural parameters of the aggregated state of polyamide (PA)-1010 annealedat various temperatures were computed by means of the desmearing intensity from SmallAngle X-ray Scattering (SAXS) measurements and by using the concept of the distance dis-tribution function. The results indicated that the structural parameters of the aggregatedstate were strongly dependent upon heat treatment conditions and the maximum valuesof the structural parameters were obtained for the samples annealed at T = 175℃. Theparticle size Z annealed at different temperature was ranged between 8.1--12.8nm, and thevalues of the distance distribution function P_(max)(Z) were obtained when Z = 4.0--6.8nm.Using one dimension electron density correlation function (1D EDCF) method long period(L) and thickness of the lamellar (d_0) were estimated and were found to increase with theincrease of the degree of crystallinity.