关于Cu-Pd合金的固态转变

应用热分析,电阻和伦琴射线方法修正了Cu-Pd合金相图,在300 ℃经过2200 h热处理后,含Cu9%～32.5%(原子分数)范围内合金由α→α〃,含Pd35%～55%(原子分数)合金由α→β.这两个相区的最高有序-无序转变温度分别为510和655 ℃.     

PdO/CeO_2类芬顿降解酸性橙7和水杨酸的催化性能（英文）

采用沉淀-沉积法制备了Pd O/Ce O2催化剂,并使用X射线衍射、高分辨透射电镜、N2吸附-脱附等温线、X射线光电子能谱和Raman光谱对催化剂进行了表征.表征结果显示,Pd在复合物中以Pd2+形式存在;Pd O和Ce O2间的相互作用提高了Ce O2中的Ce3+含量.通过酸性橙7和水杨酸的类芬顿降解考察了Pd O/Ce O2的多相类芬顿和可见光芬顿催化活性.结果表明,Pd O沉积显著地促进了水杨酸的类芬顿降解,催化剂的Pd O含量为1.0 at%时其活性最佳.染料酸性橙7在可见光照射条件下会引发染料光敏化效应.吸附的染料分子在光激发后通过界面电子注入促进了Ce3+自表面过氧物种的再生.由此,Pd O负载和可见光照射的共同作用下,1.0 Pd O/Ce O2催化剂的酸性橙7类芬顿降解速率常数为3.90 h-1,为纯Ce O2活性的50倍左右.     

KAlF4熔液结构的推断

研究了KAIF_4与简单氟化物,与KBF_4,K_3AIF_6,K_3GaF_6,K_3YF_6,KBe_2F_5等不同类型化合物组成的赝二元系的相图.相图结果表明,化合物组成与KAIF_4愈相似者对KAIF_4的熔点影响愈大,共晶熔液中含这个化合物的浓度也愈大.简单氟化物800℃以下在KAIF_4熔液中难溶由此推断KAIF_4 熔液由KAIF_4分子和K~+以及AIF_4~-组成.KAIF_4分子相对稳定,并占主要成分     

Pd/La_(0.8)Ce_(0.2)MnO_3/ZSM-5的制备及其甲苯催化燃烧活性

以贵金属改性的钙钛矿为活性组分,通过等体积浸渍法制备了Pd/La0.8Ce0.2MnO3/ZSM-5催化剂,并采用XRD、BET、SEM和H2-TPR等技术对催化剂进行了表征。在固定床反应器上,对Pd/La0.8Ce0.2MnO3/ZSM-5催化剂上的甲苯为目标污染物的催化燃烧进行了研究,考察了焙烧温度、负载量及ZSM-5的性质对其催化活性的影响。结果表明,所得到Pd/La0.8Ce0.2MnO3催化剂仍保持钙钛矿型结构,Pd均匀的分布在催化剂表面,有利于催化剂活性的提高。当ZSM-5硅铝原子比为25、La0.8Ce0.2MnO3负载量为20%、焙烧温度为750℃时,La0.8Ce0.2MnO3/ZSM-5上甲苯的起燃温度和完全转化温度分别为200和279℃;加入0.3%的Pd后,Pd/La0.8Ce0.2MnO3/ZSM-5的催化活性明显提高,甲苯起燃温度下降了90℃,完全转化温度可低至230℃。     

KAlF4熔液结构的推断

研究了KAlF4与简单氟化物, 与KBF4, K3AlF6, K3GaF6, K3YF6, KBe2F5等不同类型化合物组成的赝二元系的相图。相图结果表明, 化合物组成与KAlF4愈相似者对KAlF4的熔点影响愈大, 共晶熔液中含这个化合物的浓度也愈大。简单氟化物800℃以下在KAlF4熔液中难溶, 由此推断KAlF4熔液由KAlF4分子和K^+以及AlF4^-组成。KAlF4分子相对稳定, 并占主要成分。     

由含稳定化合物的二元相图计算化合物的活度

本文提出了一种含稳定化合物相图中化合物的活度计算的新方法,即根据已有的从相图提取活度的公式,结合质量作用定律,由纯组元的活度计算得到化合物的活度.用此方法计算了Al-Ca及In-Sb两个二元系中稳定化合物的活度,计算结果与文献值吻合较好.     

铈对铅钙锡合金在硫酸溶液中阳极行为的影响

应用循环伏安法研究了Pb - 0 .5at %Ca - 1 .5at %Sn和含Ce的Pb - 0 .5at%Ca - 1 .5at%Sn合金电极在 4.5mol·dm- 3H2 SO4溶液中和 0 .6～ 1 .4V(vs .Hg/Hg2 SO4电极 )电位范围内的电化学特性 ,并采用线性电位扫描法和交流伏安法分别研究了上述合金在相同溶液中以 0 .9V(vs .Hg/Hg2 SO4电极 )生长的阳极Pb(Ⅱ )膜增长率和膜的阻抗实数部分 (Z’)变化 .结果表明 ,在铅合金中添加Ce对阳极Pb(Ⅱ )膜的生长有显著的抑制作用并降低铅阳极膜的Z’ .以上述两种合金作为正极板栅制作的铅蓄电池 ,含Ce的Pb Ca Sn合金的深充放循环性能明显优于Pb Ca Sn合金 .     

Ce3(PO4)4在酸性溶液加热条件下化学形态转化及机理研究

磷酸高铈(Ce3(PO4)4)是一种难溶于水的化合物,本文测定磷酸高铈在常温pH=0.4的Ksp值为1~8×10-34,但在测定过程中发现Ce3(PO4)4的溶解度受温度变化的影响较大,尤其在50℃以上时,Ce3(PO4)4饱和溶液体系中的Ce4 、PO43-和pH值均变化异常。根据测得的Ce4 、PO43-浓度以及pH值,推断出50℃以上时Ce3(PO4)4转化为Ce(HPO4)2,并建立了相应的转化机理,测定出Ce(HPO4)2的Ksp为3~7×10-13。     

新型含5-芳基异噁唑结构的氰基丙烯酸酯类化合物的合成及生物活性

通过5-取代苯基异噁唑-3-甲基胺与2-氰基-3,3-二甲硫基丙烯酸取代酯的缩合反应,合成了一系列含5-取代苯基异噁唑环结构的氰基丙烯酸酯类衍生物,并采用核磁共振波谱和元素分析对化合物的结构进行了表征.初步的生物活性测试结果表明,部分化合物显示出较好的除草活性,在1500 g/ha剂量下,化合物7h,7i和7m对芥菜的茎叶处理抑制率分别为90%,40%和100%;化合物7m和7n对繁缕的茎叶处理抑制率分别为100%和80%;化合物7m和7n对小藜的茎叶处理抑制率分别为100%和85%.此外,化合物7b和7c还表现出良好的抗肿瘤活性,其对HepG2细胞的IC50值分别为3.2和10.1μmol/L.     

钯催化下(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇与末端炔 烃的偶联反应

在Pd(PPh~3)~4/CuI催化下和使用1mol的NEt~3作碱和THF作溶剂,(Z)-3-碘-3-三氟甲基-1-芳基烯丙醇(1)与末端炔烃(3)反应得到正常的偶联产物5。当以NEt~3作碱和溶剂,Pd(PPh~3)~4/CuI催化1与3的交叉偶联反应生成化合物4。4为正常偶联化合物5在NEt~3存在下双键发生重排反应的产物。     

Mixed transition metal-lanthanide complexes at high oxidation states: heteronuclear CeIVMnIV clusters

The syntheses of the first mixed-metal CeIVMnIV complexes are reported. [CeMn2O3(O2CMe)(NO3)4(H2O)2(bpy)2](NO3) (1; bpy=2,2'-bipyridine) was obtained from the reaction of Mn(NO3)2.xH2O and bpy with (NH4)2Ce(NO3)6 in a 1:1:2 molar ratio in 25% aqueous acetic acid. The complexes [CeMn6O9(O2CR)9(X)(H2O)2]y+ (R=Me, X=NO3-, y=0 (2); R=Me, X=MeOH, y=+1 (3); R=Et, X=NO3-, y=0 (7)) were obtained from reactions involving a [Mn(O2CR)2].4H2O/CeIV ratio of approximately 1:1.5 in concentrated aqueous carboxylic acid. A related reaction in less-concentrated aqueous acetic acid and in the presence of L (where L=2-hydroxy-6-methylpyridine (mhpH), 2-pyrrolidinone (pyroH), or pyridine (py)) gave [Ce3Mn2O6(O2CMe)6(NO3)2(L)a(H2O)b] (L=mhpH, a=4, b=0 (4); L=pyroH, a=2, b=3 (5)) and {{(pyH)3[Ce3Mn2O6(O2CMe)7.5(NO3)3].(HO2CMe)0.5.(H2O)2}2(NO3)}n (6), respectively. Solid-state magnetic susceptibility (chiM) data for compounds 1, 4, and 5 were fit to the theoretical chiMT versus T expression for a MnIV2 complex derived using the isotropic Heisenberg spin Hamiltonian (H=-2J?1? 2) and the Van Vleck equation. The obtained fit parameters were (in the format J, g) 1, -45.7(3) cm(-1), 1.95(5); 4, -0.40(10) cm(-1), 2.0(1); and 5, -0.34(10) cm(-1), 2.0(1), where J is the exchange interaction constant between the two MnIV ions. The data for compound 3 were fit by a matrix diagonalization method that gave J1=-5.8 cm(-1), J2=-0.63 cm(-1), J3 approximately 0, and g=2.0(1), where J1 and J2 are the exchange interactions for the [MnIV2O2(Omicron2CMe)] and [MnIV2O(Omicron2CMe)2] units, respectively, and J3 for a uniform next-nearest-neighbor interaction. Theoretical estimates of the exchange constants in compounds 1 and 3 obtained with the ZILSH method were in excellent and good agreement, respectively, with the values obtained from fits of the magnetization data. The difference for 3 is assigned to the presence of the Ce4+ ion, and atomic bond indices obtained from the ZILSH calculations were used to rationalize the values of the various exchange constants based on metal-ligand bond strengths.     

Local structure of Pt and Pd ions in Ce(1-x)TixO2: x-ray diffraction, x-ray photoelectron spectroscopy, and extended x-ray absorption fine structure

Ce(1-x-y)Ti(x)Pt(y)O(2-delta) (x=0.15; y=0.01) and Ce(1-x-y)Ti(x)Pd(y)O(2-delta) (x=0.25; y=0.02 and 0.05) are found to be good CO oxidation catalysts [T. Baidya et al., J. Phys. Chem. B 110, 5262 (2006); T. Baidya et al., J. Phys. Chem. C 111, 830 (2007)]. A detailed structural study of these compounds has been carried out by extended x-ray absorption fine structure along with x-ray diffraction and x-ray photoelectron spectroscopy. The gross cubic fluorite structure of CeO(2) is retained in the mixed oxides. Oxide ion sublattice around Ti as well as Pt and Pd ions is destabilized in the solid solution. Instead of ideal eight coordinations, Ti, Pd, and Pt ions have 4+3, 4+3, and 3+4 coordinations creating long and short bonds. The long Ti-O, Pd-O, and Pt-O bonds are approximately 2.47 A (2.63 A for Pt-O) which are much higher than average Ce-O bonds of 2.34 A.     

Dawson结构钼砷杂多酸(盐)的合成与性质研究

采用酸化-回流-乙醚萃取法合成了二十种Dawson结构钼砷杂多酸及其盐, 元素分析确定了它们的组成, 其通式为MwAs2Mo18Oe2.nH2O, 酸碱及电导滴定确定了碱度, 系统地研究了它们的红外光谱, 紫外光谱, 极谱, 循环伏安, 热重-差热分析等性质, 给出了杂多阴离子As2Mo18O62^6^-在水溶液中的氧化还原机理,讨论并指认了紫外吸收为e→*和e→b2的荷移跃迁谱带, 考察了抗衡离子M^n^+对主要红外振动光谱, 热分解温度及其分解产物的影响。     

Doping of Ceria-Zirconia Solid Solution with Rare-earth Elements

The increasingly restrictive regulations on car exhaust emissions will necessitate the development of a new generation of three way catalysts (TWC) with better performance1. Ceria (CeO2) is the main component of the current TWC: its key role is to compensate the fluctuations in the exhaust stream composition, therefore, allowing to expand the air/fuel(A/F) operating window of catalytic converters2. This property is related to its oxygen storage capacity (OSC), associated to the redox couple Ce4+/Ce3+. However, CeO2 alone is easy to sinter to lost OSC at high temperature3.Ceria-zirconia (CexZr1-xO2) solid solutions by incorporation of Zr4+ in the CeO2 lattice have enhanced OSC and greater thermal stability, which are becoming the key materials for the new generation of TWC4. OSC of ceria-zirconia solid solutions can be further improved by the addition of M3+ dopants5. Besides Ce, other rare-earth elements such as Pr and Tb can vary their oxidation state. Pr and Tb are particularly suitable for making solid solutions with cerium because the known structure of PrO2 and TbO2 is of the cubic fluorite type, and the ionic radii of Pr4+ and Tb4+ are close to that of Ce4+6.In this paper, Ce0.6Zr0.3M0.1O2 (M=Y, La, Pr, Tb) were prepared by co-precipitation technique and characterized by a series of methods. Meanwhile, palladium-only TWCs were prepared by slurry coating and their catalytic activity was evaluated under the condition of simulated exhaust in the lab.XRD and FT-Raman spectra results show Ce0.6Zr0.3M0.1O2 have cubic fluorite structure which keep unchanging at high temperature. The different dopant ion radii brought different effect on the cell parameter of Ce0.6Zr0.3M0.1O2. The X-ray photoelectron spectroscopy (XPS) results show that the binding energy of Ce3d, Zr3d and O1s for Ce0.6Zr0.3M0.1O2 rose compared with that for Ce0.6Zr0.4O2, indicating dopant elements changed chemistry environment of solid solutions which was available to improve redox performance From TPR results, doping La can not change redox performance of solid solution, but doping Y decreased reduction temperature. Doping Pr and Tb notably improved redox performance of solid solutions due to appearance of low-temperature reduction peak in TPR profile which come from mobility of bulk oxygen.Compared with Pd/Ce0.6Zr0.4O2, doping Y and La unchanged A/F characteristic of TWCs, but doping Pr and Tb widen A/ F operating window and make HC, CO and NO have higher conversion.The light-off temperature of Pd/Ce0.6Zr0.3La0.1O2 was corresponded to that of Pd/Ce0.6Zr0.4O2.However, the light-off temperatures of Pd/Ce0.6Zr0.3M0.1O2 (M=Y, Pr, Tb) were lower than that of Pd/Ce0.6Zr0.4O2, which kept much lower after high temperature treatments. Among Pd/Ce0.6Zr0.3M0.1O2 (M=Y, La, Pr, Tb), Pd/Ce0.6Zr0.3Tb0.1O2 showed wider A/F operating window,higher conversion, lower light-off temperature and better high-temperature resistance     

一个新的铈砷钨酸盐大阴离子[As4W40O140Ce(H2O)5]^25-

合成了一新的铈砷钨酸盐[As4W40C140Ce(H2O)5]Na25·63H2O,用X射线单晶衍射法及元素分析确定了其结构。其晶胞参数为：a=3.1252(8)nm,b=2.2656(6)nm,c=1.3973(9)nm,α=β=γ90°,V=9.893(7)nm^3,空间群P21/m21/m2/n。在聚阴离子[As4W40O140Ce(H2O)5]^25-中,四个桥连WO6八面体通过相互共享两个顺式氧串联四个B-α-(AsW9O33)^9-形成环配体(As4W40O140)^28-的基本框架,四个B-α-(AsW9O33)^9-并不处在一个平面上,而是上下交错分布的。中心离子Ce(Ⅲ)未完全填充在(As4W40O140)^28-中具有八齿配位能力的S1洞穴中,而是四个桥连的WO6八面体各提供一个端基氧向Ce(Ⅲ)配位,另有五个水分子向Ce(Ⅲ)配位,Ce(Ⅲ)离子的配位数为9,该离具有C2v对称性。     

Sonochemical synthesis of Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) nanocrystallites: oxygen storage material, CO oxidation and water gas shift catalyst

Nanocrystalline Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) of ~4 nm sizes were synthesized by a sonochemical method using diethyletriamine (DETA) as a complexing agent. Compounds were characterized by powder X-ray diffraction (XRD), X-ray photo-electron spectroscopy (XPS) and transmission electron microscopy (TEM). Ce(1-x)Fe(x)O(2-δ) (0 ≤ x ≤ 0.45) and Ce(0.65)Fe(0.33)Pd(0.02)O(2-δ) crystallize in fluorite structure where Fe is in +3, Ce is in +4 and Pd is in +2 oxidation state. Due to substitution of smaller Fe(3+) ion in CeO(2), lattice oxygen is activated and 33% Fe substituted CeO(2)i.e. Ce(0.67)Fe(0.33)O(1.835) reversibly releases 0.31[O] up to 600 °C which is higher or comparable to the oxygen storage capacity of CeO(2)-ZrO(2) based solid solutions (Catal. Today 2002, 74, 225-234). Due to interaction of redox potentials of Pd(2+/0)(0.89 V) and Fe(3+/2+) (0.77 V) with Ce(4+/3+) (1.61 V), Pd ion accelerates the electron transfer from Fe(2+) to Ce(4+) in Ce(0.65)Fe(0.33)Pd(0.02)O(1.815), making it a high oxygen storage material as well as a highly active catalyst for CO oxidation and water gas shift reaction. The activation energy for CO oxidation with Ce(0.65)Fe(0.33)Pd(0.02)O(1.815) is found to be as low as 38 kJ mol(-1). Ce(0.67)Fe(0.33)O(1.835) and Ce(0.65)Fe(0.33)Pd(0.02)O(1.815) have also shown high activity for the water gas shift reaction. CO conversion to CO(2) is 100% H(2) specific with these catalysts and conversion rate was found to be as high 27.2 μmoles g(-1) s(-1) and the activation energy was found to be 46.4 kJ mol(-1) for Ce(0.65)Fe(0.33)Pd(0.02)O(1.815).     

Nb4Pd0.5ZSb2 (Z = Cr, Fe, Co, Ni, Si): the first ordered quaternary variants of the W5Si3-type structure

A family of quaternary (or pseudoquaternary) antimonides Nb4Pd0.5ZSb2 (Z = Cr, Fe, Co, Ni, Si) containing up to three transition metals in an ordered arrangement has been prepared by reactions of the elements. These antimonides are isostructural, crystallizing as substitutional variants of the W5Si3-type structure (tetragonal, space group -I4/mcm, Z = 4) with unit cell parameters a = 10.4407(3) A and c = 5.0020(2) A for Nb4Pd0.5Cr0.28(3)Si0.72Sb2, a = 10.4825(6) A and c = 4.9543(3) A for Nb4Pd0.5FeSb2, a = 10.4603(5) A and c = 4.9457(3) A for Nb4Pd0.5CoSb2, a = 10.4332(7) A and c = 4.9649(3) A for Nb4Pd0.5Ni0.78(1)Sb2, and a = 10.3895(10) A and c = 4.9634(4) A for Nb4Pd0.5SiSb2. They are distinguished by the filling of interstitial Z atoms into the centers of Nb8 square antiprismatic clusters that are linked by PdSb4 tetrahedra. The Nb8 square antiprisms share opposite square faces to form one-dimensional chains along the c axis so that Z-Z bonding distances of approximately 2.5 A result. Extended Hückel band structure calculations were carried out to interpret the homo- and heteroatomic metal-metal interactions in the structure. The resistivity of one member, Nb4Pd0.5SiSb2, was measured, indicating metallic behavior.     

Direct evidence of redox interaction between metal ion and support oxide in Ce(0.98)Pd(0.02)O(2-δ) by a combined electrochemical and XPS study

A combined electrochemical method and X-ray photo electron spectroscopy (XPS) has been utilized to understand the Pd(2+)/CeO(2) interaction in Ce(1-x)Pd(x)O(2-δ) (x = 0.02). A constant positive potential (chronoamperometry) is applied to Ce(0.98)Pd(0.02)O(2-δ) working electrode which causes Ce(4+) to reduce to Ce(3+) to the extent of ~35%, while Pd remains in the +2 oxidation state. Electrochemically cycling this electrode between 0.0-1.2 V reverts back to the original state of the catalyst. This reversibility is attributed to the reversible reduction of Ce(4+) to Ce(3+) state. CeO(2) electrode with no metal component reduces to CeO(2-y) (y~0.4) after applying 1.2 V which is not reversible and the original composition of CeO(2) cannot be brought back in any electrochemical condition. During the electro-catalytic oxygen evolution reaction at a constant 1.2 V for 1000 s, Ce(0.98)Pd(0.02)O(2-δ) reaches a steady state composition with Pd in the +2 states and Ce(4+): Ce(3+) in the ratio of 0.65:0.35. This composition can be denoted as Ce(4+)(0.63)Ce(3+)(0.35)Pd(0.02)O(2-δ-y) (y~0.17). When pure CeO(2) is put under similar electrochemical condition, it never reaches the steady state composition and reduces almost to 85%. Thus, Ce(0.98)Pd(0.02)O(2-δ) forms a stable electrode for the electro-oxidation of H(2)O to O(2) unlike CeO(2) due to the metal support interaction.     

K5LnLi2F10(Ln=La,Gd, Y)的合成和Ce^3^+在其中的发光

在Ar气氛中, 采用高温固相反应法合成了K5LnLi2F10(Ln=La, Ce, Gd, Y)化合物,X射线衍射图表明: 除K5YLi2F10外, 均具有与K5NdLi2F10(KNLF)相同的结构。计算了K5LnLi2F10(Ln=Ln, Ce, Gd)的晶胞参数和晶胞体积, 它们随着La^3^+, Ce^3^+,Gd^3^+的离子半径减小而有规律地减小, 测定了K5CexLn1-xLi2F10化合物的激发光谱和荧光光谱, 发现Ce^3^+的激发波长和发射波长随着La^3^+, Gd^3^+, Y^3^+离子的改变几乎不变, 并对这种现象进行了讨论。     

Preparation and characterization of dinuclear Pd(II) complexes of binucleating tetraaza-thiophenolate ligands

The thioethers 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L3) and 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L4) react with PdCl2(NCMe)2 to give the dinuclear palladium thiophenolate complexes [(L3)Pd2Cl2]+ (2) and [(L4Pd2(mu-Cl)]2+ (3) (HL3= 2,6-bis((2-(dimethylamino)ethylimino)methyl)-4-tert-butylbenzenethiol, HL4 = 2,6-bis((2-(dimethylamino)ethylamino)methyl)-4-tert-butylbenzenethiol). The chloride ligands in could be replaced by neutral (NCMe) and anionic ligands (NCS-, N3-, CN-, OAc-) to give the diamagnetic Pd(II) complexes [(L3)Pd2(NCMe)2]3+ (4), [(L3)Pd2(NCS)2]+ (5), [(L3)Pd2(N3)2]+ (6), [{(L3)Pd2(mu-CN)}2]4+ (7) and [(L3)Pd2(OAc)]2+ (9). The nitrile ligands in and in [(L3)Pd2(NCCH2Cl)2]3+ are readily hydrated to give the corresponding amidato complexes [(L3)Pd2(CH3CONH)]2+ (8) and [(L3)Pd2(CH2ClCONH)]2+ (10). The reaction of [(L3)Pd2(NCMe)2]3+ with NaBPh4 gave the diphenyl complex [(L3)Pd2(Ph)2]+ (11). All complexes were either isolated as perchlorate or tetraphenylborate salts and studied by IR, 1H and 13C NMR spectroscopy. In addition, complexes 2[ClO4], 3[ClO4]2, 5[BPh4], 6[BPh4], 7[ClO4]4, 9[ClO4]2, 10[ClO4]2 and 11[BPh4] have been characterized by X-ray crystallography.