Antibacterial poly(D,L-lactide) (PDLLA) fibrous membranes modified with quaternary ammonium moieties

<正>Antibacterial poly(D,L-lactide)(PDLLA) fibrous membranes were developed via electrospinning,followed by surface modification which involved plasma pretreatment,UV-induced graft copolymerization of 4-vinylpyridine(4VP) and quaternization of the grafted pyridine groups with hexylbromide.The success of modification with quatemized pyridinium groups on the PDLLA fibrous membranes was ascertained by X-ray photoelectron spectroscopy(XPS).The antibacterial activities of these membranes were assessed against Gram-positive Staphylococcus aureus(S.aureus) and Gram-negative Escherichia coli(E.coli).The PDLLA fibrous membranes modified with quaternized pyridinium groups showed antibacterial efficiency against both bacteria as high as 99.999%.The results demonstrated that the antibacterial activity was based on the interaction of the positive charge of pyridinium group and negatively charged cell membrane of bacteria, resulting in loss of membrane permeability and cell leakage.     

Interactions between pyridinium and Nd3+

In this paper,2D asynchronous spectra generated by using the DAOSD approach was utilized to probe interactions between Nd~(3+) and pyridinium dissolved in aqueous solution.A series of cross peaks in the resultant 2D asynchronous spectrum confirms the occurrence of intermolecular interaction between Nd~(3+)and pyridinium.However,no coordination occurs between Nd~(3+) and pyridinium.Interaction between πelectron from aromatic system and/electron from lanthanide ions account for the appearance of cross peaks in 2D asynchronous spectra.Because of the interaction,the emission spectrum of pyridinium exhibits a significant change when neodymium perchlorate was introduced into the system.     

A Novel Complex of Pyridinium Polystyrylsulfonate with Fluoboric Acid as a Catalyst for Acetalization of Benzaldehyde with n-Butanol

A new complex (1) was prepared by mixing pyridinium polystyrylsulfonate resin and aqueous fluoboric acid, followed by being dehydrated. 1 can be used as an acidic catalyst for the acetalization of benzaldehyde with n-butanol with a highly catalytic activity. The characterization and reusability of 1 are discussed.     

Rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography using a monolithic column

A method for rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography with ultraviolet detection was developed.Chromatographic separations were performed on a reversed-phase silica-based monolithic column using 1-heptanesulfonic acid sodium-acetonitrile as mobile phase.The effects of ion-pair reagent and acetonitrile concentration on retention of the cations were investigated.The retention times of the cations accord with carbon number rule.The method has been successfully applied to the determination of four ionic liquids synthesized by organic chemistry laboratory.     

Incorporation of Lysine-Containing Copolymer with Polyurethane Affording Biomaterial with Specific Adsorption of Plasminogen

A novel biomaterial based on polyurethane (PU) was prepared through physical incorporation of lysine-containing copolymer to improve its hemocompatibility and surface recognition of plasminogen.The lysine-containing copolymer was synthesized via the copolymerization of 2-ethylhexyl methacrylate (EHMA),oligo (ethylene glycol)methyl ether methacrylate (OEGMA) and 6-tert-butoxycarbonyl amino-2-(2-methyl-acryloylamino)-hexanoic acid tert-butyl ester (Lys(P)MA),followed by the deprotection of COOH and ε-NH2 groups on lysine residues in the copolymer.The composition of the copolymer can be adjusted by varying the monomer feed ratio.The three components contribute to improving the compatibility with PU,resistance to nonspecific protein adsorption and specific binding of plasminogen,respectively.The binding capacity towards plasminogen increased with the lysine content in the copolymer.This approach illustrates a simple way for the generation of novel biomaterials with improved hemocompatibility and surface recognition of specific biomolecules.     

MOLECULAR DYNAMICS SIMULATION OF THE RELAXATION OF A FULLY EXTENDED POLYETHYLENE CHAIN

Molecular dynamics simulation of the relaxation at 300 K of a fully extended polyethylene chain of800 CH_2 units has been carried out by following the changes in morphology, van der Waals energy, radius ofgyration in the sense of mechanics and gyration radius in the sense of Flory, population of trans-conformation and orientation factor. The relaxation went through three stages: (1) relaxation from themorphology of a straight rod of 100 nm length to the molphology close to a random coil of gyration radius5.9 nm in 110 ps; (2) collapse of the morphology of a coil to a highly compact globule close to a sphere ofgyration radius 1.3 nm after 178 ps as the result of intersegmental van der Waals attractive interactions; (3)lateral ordering of the folded chain segments in the globule without appreciable changes in the chaindimension up to 1600 ps, the time limit of present simulation. Nearly complete relaxation of local segmentalorientation was performed much faster than the relaxation of globule chain orientation even for a single chainof low degree of polymerization and at a temperature some 155℃above its T_g. The lateral ordering of thechain segments during the period 178 to 680 ps of the simulation time was found to obey the Avramiequation with an Avrami index of 1 .44.     

OPTICAL STORAGE MECHANISM AND HIGH-ORDER DIFFRACTION PROPERTIES OF NITROAZOBENZENE-CONTAINING POLYESTER FILMS

Using Nd:YAG second harmonic pulse (100 ps), the optical storage proper-ties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene suc-cinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) iminth-4-nitroazobenzene succiny] havebeen studied by multiwave mixing. The high-order diffractions of the orientation gratingsinduced by anisotropy via the reorientation of nitroazobenzene groups and optical infor-mation storage with long-term stability have been realized by multiwave mixing in theirfilms. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4thorder backward diffraction was observed in degenerated four wave mixing. The recordingmechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups.The isomerization of these azobenzene groups probably undergoes with inversion mecha-nism under the experimental conditions. The information recorded in these films has beenkept for more than 6 months.     

Ultrafast Excited State Dynamics of t~rans-4-Aminoazobenzene Studied by Femtosecond Transient Absorption Spectroscopy

The ultrafast excited state dynamics of trans-4-aminoazobenzene （trans-4-AAB） in ethanol was investigated by femtosecond transient absorption spectroscopy. After being excited to the S2 state by 400 nm, trans-4-AAB decays from the S2 state to the hot S1 state by internal conversion with time constant of -70 fs. The photoisomerization through inversion mechanism on the S1 potential energy surface and the internal conversion from the S1 state to the hot So state are observed, respectively. The average timescale of these two decay pathways is -0.7 ps. And the vibrational cooling of the hot So state of cis- and trans-4- AAB occur with time constants of -4 and N13 ps, respectively. Furthermore, the ultrafast intersystem crossing process are also observed. The timescale of intersystem crossing from the S2 state to the T4 state is about 480 ps while from the S1 state to the T2 state is -180 ps.     

Synthesis and Properties of Novel Hemicyanine Dye-β-Cyclodextrin

A series of novel hemicyanine dye-β-cyclodextrin compounds： mono-6-deoxy-β-cyclodextrin-6-[p-（p-substituted styryl）pyridium] p-totylfulfonates were synthesized by the condensation of mono-6-deoxy-β- cyclodextrin-6-（p-methyl pyridinium） p-toluenesulfonate with （un）substituted benzaldehydes. Their structures were established by 1^H NMR, IR, UV-Vis and elemental analysis. The absorption and fluorescence properties of the novel compounds were measured in solution and the photostability of a selected hemicyanine dye-β-cyclodextrin compound was also investigated.     

IONIC CONDUCTION IN BLENDS OF POLY(PYRIDINIUM ETHYL METHACRYLATE)AND COMB—LIKE COPOLYETHER

Poly(pyridinium ethyl methacrylate)was synthesized.The blends ofpolymeric solid anion conductor,P(PyEMAClO+4)/P(MEO_(16)—AM),were prepared.The temperature—dependence of both the conductivity and anionic mobility in theblends obey Arrhenius relationship,the transport of perchlorate anion being of thermalactivation mechanism.Perchlorate anion is a free anion in the blends.     

A one‐dimensional CdII coordination polymer constructed from 4‐(dimethylamino)pyridinium‐1‐acetate ligands and thiocyanate coordination bridges

A new cadmium–thiocyanate complex, namely catena‐poly[1‐carboxymethyl‐4‐(dimethylamino)pyridinium [cadmium(II)‐tri‐μ‐thiocyanato‐κ⁴N:S;κ²S:N] [[[4‐(dimethylamino)pyridinium‐1‐acetate‐κ²O,O′]cadmium(II)]‐di‐μ‐thiocyanato‐κ²N:S;κ²S:N]], {(C₉H₁₃N₂O₂)[Cd(NCS)₃][Cd(NCS)₂(C₉H₁₂N₂O₂)]}_n, was synthesized by the reaction of 4‐(dimethylamino)pyridinium‐1‐acetate, cadmium nitrate tetrahydrate and potassium thiocyanide in aqueous solution. In the crystal structure, two types of Cd^II atoms are observed in distorted octahedral coordination environments. One type of Cd^II atom is coordinated by two O atoms from the carboxylate group of the 4‐(dimethylamino)pyridinium‐1‐acetate ligand and by two N atoms and two S atoms from four different thiocyanate ligands, while the second type of Cd^II atom is coordinated by three N atoms and three S atoms from six different thiocyanate ligands. Neighbouring Cd^II atoms are linked by thiocyanate bridges to form a one‐dimensional zigzag chain and a one‐dimensional coordination polymer. Hydrogen‐bond interactions are involved in the formation of the supramolecular network.     

Synthesis,Characterization, and Physicochemical Properties of Hydrophobic Pyridinium‐based Ionic Liquids with N‐Propyl and N‐Isopropyl

Synthesis and physicochemical properties of four pyridinium‐based ionic liquids (ILs), N‐propylpyridinium bromide [N‐propylPyr]⁺[Br]^–, N‐isopropylpyridinium bromide [N‐isopropylPyr]⁺[Br]^–, N‐propylpyridinium hexafluorophosphate [N‐propylPyr]⁺[PF₆]^–, and N‐isopropylpyridinium hexafluorophosphate [N‐isopropylPyr]⁺[PF₆]^– are reported. The molecular structures of these compounds were characterized by FT‐IR, ¹H, ¹⁹F, and ³¹P NMR, spectroscopy. The thermal properties, conductivity, and solubility of these ionic liquids were also investigated. The effects of propyl and isopropyl alkyl lateral chain at the N‐position of pyridinium cation on the thermal stability, conductivity, and solubility of ionic liquids are discussed. The results obtained confirmed that the ionic liquids based on pyridinium cations exhibit higher decomposition temperature, low melting points, immiscible with water, and their conductivities are mainly influenced by mobility of ions.     

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium cation with perhalometallate anions to give 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C₁₂H₁₂N₂)[CoCl₄], (I), and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridozincate(II), (C₁₂H₁₂N₂)[ZnCl₄], (II). The compounds have been structurally characterized by single‐crystal X‐ray diffraction analysis, showing the formation of a three‐dimensional network through X—H...Cl_nM⁻ (X = C, N⁺; n = 1, 2; M = Co^II, Zn^II) hydrogen‐bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).     

Pyridyl Radical Cation for C−H Amination of Arenes

Electron‐transfer photocatalysis provides access to the elusive and unprecedented N‐pyridyl radical cation from selected N‐substituted pyridinium reagents. The resulting C(sp²)?H functionalization of (hetero)arenes furnishes versatile intermediates for the development of valuable aminated aryl scaffolds. Mechanistic studies that include the first spectroscopic evidence of a spin‐trapped N‐pyridyl radical adduct implicate SET‐triggered, pseudo‐mesolytic cleavage of the N?X pyridinium reagents mediated by visible light.     

Mono­alkyl­ated 4′‐aryl‐substituted terpyridines

1‐Methyl‐2‐[4‐phenyl‐6‐(pyridinium‐2‐yl)­pyridin‐2‐yl]­pyridinium diperchlorate, C₂₂H₁₉N₃²⁺·2ClO₄⁻, (I), and 2‐[4‐(methoxy­phenyl)‐2,2′‐bipyridin‐6‐yl]‐1‐methyl­pyridinium iodide, C₂₃H₂₀N₃O⁺·I⁻, (II), both crystallize in the monoclinic space group P2₁/c. In contrast with the monocharged mol­ecule of (II), the doubly charged mol­ecule of (I) contains an additional protonated pyridine ring. One of the two perchlorate counter‐anions of (I) interacts with the cation of (I) via an N—H⋯O hydrogen bond. In (II), two mol­ecules related by a centre of symmetry are connected by weak π–π interactions, forming dimers in the crystal structure.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

1H and 13C NMR spectral assignments of pyridinium salts linked to a N‐9 or N‐3 adenine moiety

¹H and ¹³ C NMR spectral data of 13 new compounds containing a 4‐(dimethylamino)‐ or 4‐(pyrrolidin‐1‐yl)pyridinium moiety linked to the N‐9 or N‐3 nitrogen atom of an adenine moiety were assigned. 1D and 2D NMR experiments (DEPT, HSQC and HMBC) allowed the unequivocal identification of N‐9 and N‐3 isomers. Copyright © 2012 John Wiley & Sons, Ltd.     

Diazoniapentaphenes. Synthesis from pyridine‐2‐carboxaldehyde and structural verifications

Reactions of pyridine‐2‐carboxaldehyde (9) with α,α′‐dibromo‐o‐ and p‐xylenes led to the corresponding bis‐pyridinium aldehydes 10 and 14. These aldehydes were quite reactive and the respective hydrates 11 and 15 were also formed. Cyclization of 10 or 11 with 48% HBr led to 12 while cyclization with PPA followed by conversion to the bis tribromide and loss of bromine led to 1. Cyclization of 14 or 15 with 48% HBr led to 3. Attempts to react α,α′‐dibromo‐m‐xylene with pyridine‐2‐carboxaldehyde (9) were not successful for the preparation of the bis‐pyridinium aldehyde 13. The bis‐pyridinium acetals 4, 5 and 6 were prepared and cyclized to afford 1, 2 and 3 , respectively, by the previously reported procedures. The structures of 1 and 2 were verified by ¹H‐NMR and ¹³C‐NMR spectroscopy while that of 3 was confirmed by X‐ray analysis.     

Dye‐Sensitized Solar Cells Based on a Donor–Acceptor System with a Pyridine Cation as an Electron‐Withdrawing Anchoring Group

New hemicyanine dyes ( CM101 , CM102 , CM103 , and CM104 ) in which tetrahydroquinoline derivatives are used as electron donors and N‐(carboxymethyl)‐pyridinium is used as an electron acceptor and anchoring group were designed and synthesized for dye‐sensitized solar cells (DSSCs). Compared with corresponding dyes that have cyanoacetic acid as the acceptor, N‐(carboxymethyl)‐pyridinium has a stronger electron‐withdrawing ability, which causes the absorption maximum of dyes to be redshifted. The photovoltaic performance of the DSSCs based on dyes CM101 – CM104 markedly depends on the molecular structures of the dyes in terms of the n‐hexyl chains and methoxyl. The device sensitized by dye CM104 achieved the best conversion efficiency of 7.0 % (J_sc=13.4 mA cm^?2, V_oc=704 mV, FF=74.8 %) under AM 1.5 irradiation (100 mW cm^?2). In contrast, the device sensitized by reference dye CMR104 with the same donor but the cyanoacetic acid as the acceptor gave an efficiency of 3.4 % (J_sc=6.2 mA cm^?2, V_oc=730 mV, FF=74.8 %). Under the same conditions, the cell fabricated with N719 sensitized porous TiO₂ exhibited an efficiency of 7.9 % (J_sc=15.4 mA cm^?2, V_oc=723 mV, FF=72.3 %). The dyes CM101 – CM104 show a broader spectral response compared with the reference dyes CMR101 – CMR104 and have high IPCE exceeding 90 % from 450 to 580 nm. Considering the reflection of sunlight, the photoelectric conversion efficiency could be almost 100 % during this region.     

Ruthenium‐Catalyzed Alkylation of Indoles with Tertiary Amines by Oxidation of a sp3 C?H Bond and Lewis Acid Catalysis

Ruthenium porphyrins (particularly [Ru(2,6‐Cl₂tpp)CO]; tpp=tetraphenylporphinato) and RuCl₃ can act as oxidation and/or Lewis acid catalysts for direct C‐3 alkylation of indoles, giving the desired products in high yields (up to 82 % based on 60–95 % substrate conversions). These ruthenium compounds catalyze oxidative coupling reactions of a wide variety of anilines and indoles bearing electron‐withdrawing or electron‐donating substituents with high regioselectivity when using tBuOOH as an oxidant, resulting in the alkylation of N‐arylindoles to 3‐{[(N‐aryl‐N‐alkyl)amino]methyl}indoles (yield: up to 82 %, conversion: up to 95 %) and the alkylation of N‐alkyl or N‐H indoles to 3‐[p‐(dialkylamino)benzyl]indoles (yield: up to 73 %, conversion: up to 92 %). A tentative reaction mechanism involving two pathways is proposed: an iminium ion intermediate may be generated by oxidation of an sp³ C? H bond of the alkylated aniline by an oxoruthenium species; this iminium ion could then either be trapped by an N‐arylindole (pathway A) or converted to formaldehyde, allowing a subsequent three‐component coupling reaction of the in situ generated formaldehyde with an N‐alkylindole and an aniline in the presence of a Lewis acid catalyst (pathway B). The results of deuterium‐labeling experiments are consistent with the alkylation of N‐alkylindoles via pathway B. The relative reaction rates of [Ru(2,6‐Cl₂tpp)CO]‐catalyzed oxidative coupling reactions of 4‐X‐substituted N,N‐dimethylanilines with N‐phenylindole (using tBuOOH as oxidant), determined through competition experiments, correlate linearly with the substituent constants σ (R²=0.989), giving a ρ value of ?1.09. This ρ value and the magnitudes of the intra‐ and intermolecular deuterium isotope effects (k_H/k_D) suggest that electron transfer most likely occurs during the initial stage of the oxidation of 4‐X‐substituted N,N‐dimethylanilines. Ruthenium‐catalyzed three‐component reaction of N‐alkyl/N‐H indoles, paraformaldehyde, and anilines gave 3‐[p‐(dialkylamino)benzyl]indoles in up to 82 % yield (conversion: up to 95 %).