A Chromium(III)‐Superoxo Complex as a Three‐Electron Oxidant with a Large Tunneling Effect in Multi‐Electron Oxidation of NADH Analogues

Metal‐superoxo species are involved in a variety of enzymatic oxidation reactions, and multi‐electron oxidation of substrates is frequently observed in those enzymatic reactions. A Cr^III‐superoxo complex, [Cr^III(O₂)(TMC)(Cl)]⁺ ( 1 ; TMC=1,4,8,11‐tetramethyl‐1,4,8,11‐tetraazacyclotetradecane), is described that acts as a novel three‐electron oxidant in the oxidation of dihydronicotinamide adenine dinucleotide (NADH) analogues. In the reactions of 1 with NADH analogues, a Cr^IV‐oxo complex, [Cr^IV(O)(TMC)(Cl)]⁺ ( 2 ), is formed by a heterolytic O−O bond cleavage of a putative Cr^II‐hydroperoxo complex, [Cr^II(OOH)(TMC)(Cl)], which is generated by hydride transfer from NADH analogues to 1 . The comparison of the reactivity of NADH analogues with 1 and p ‐chloranil (Cl₄Q) indicates that oxidation of NADH analogues by 1 proceeds by proton‐coupled electron transfer with a very large tunneling effect (for example, with a kinetic isotope effect of 470 at 233 K), followed by rapid electron transfer.     

Cu@Cu3P Core–Shell Nanowires Attached to Nickel Foam as High-Performance Electrocatalysts for the Hydrogen Evolution Reaction

The development of highly efficient and inexpensive electrocatalysts is of great importance for generating renewable energy. In this work, Cu@Cu₃P core–shell nanowires grown on nickel foam (Cu@Cu₃P/NF) are prepared by a novel in situ reduction of CuSO₄ ⋅ 5 H₂O, which forms Cu, followed by surface oxidation and low-temperature phosphorization. The unique hierarchical architecture of Cu@Cu₃P/NF integrates the advantages of enlarged surface area, fast electron transport, numerous channels for gas rapid diffusion, non-polymer binder, and enhanced catalytic performance. Remarkably, Cu@Cu₃P/NF-50, with a molar ratio of Cu/Cu₃P of around 2.63, reveals a highly efficient catalytic performance for the hydrogen evolution reaction in alkaline solution with a Tafel slope of 59 mV dec⁻¹ and a long durability of 48 h. Overpotentials as low as 218 and 302 mV are required to reach current densities of 10 and 100 mA cm⁻², respectively. Furthermore, the scientific understanding and design principle of Cu@Cu₃P/NF with controlled performance will encourage more research into other high-performance, low-cost electrocatalysts for renewable energy.     

Facile Synthesis of Three‐Dimensional Pt‐TiO2 Nano‐networks: A Highly Active Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Three‐dimensional (3D) porous metal and metal oxide nanostructures have received considerable interest because organization of inorganic materials into 3D nanomaterials holds extraordinary properties such as low density, high porosity, and high surface area. Supramolecular self‐assembled peptide nanostructures were exploited as an organic template for catalytic 3D Pt‐TiO₂ nano‐network fabrication. A 3D peptide nanofiber aerogel was conformally coated with TiO₂ by atomic layer deposition (ALD) with angstrom‐level thickness precision. The 3D peptide‐TiO₂ nano‐network was further decorated with highly monodisperse Pt nanoparticles by using ozone‐assisted ALD. The 3D TiO₂ nano‐network decorated with Pt nanoparticles shows superior catalytic activity in hydrolysis of ammonia–borane, generating three equivalents of H₂.     

Keggin‐Type Polyoxometalate‐Based Metal–Organic Networks for Photocatalytic Dye Degradation

The reaction of Keggin‐type polyoxometalate (POM) units, transition‐metal (TM) ions, and a rigid bis(imidazole) ligand (1,4‐bis(1‐imidazolyl)benzene (bimb)) in a hydrothermal environment led to the isolation of four new POM‐based metal–organic networks, [H₂L][CuL][SiW₁₂O₄₀]?2 H₂O ( 1 ), [H₂L]₂[Co(H₂O)₃L][SiW₁₁CoO₃₉]?6 H₂O ( 2 ), KH[CuL]₂[SiW₁₁CoO₃₉(H₂O)]?2 H₂O ( 3 ), and [CuL]₄[GeW₁₂O₄₀]?H₂O ( 4 ; L=bimb). All four compounds were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. Compounds 1 and 3 are new 3D networks with 1D channels. Compounds 2 and 4 contain 2D networks, which further stack into 3D supramolecular networks. The contributions of pH value, the negative charge of the POM, and the TM coordination modes to the construction of 3D networks were elucidated by comparing the synthetic conditions and structures of compounds 1 – 4 . The photocatalytic properties of compounds 1 – 4 were investigated using methylene blue (MB) degradation under UV light. All compounds showed good catalytic activity and structural stability. The possible catalytic mechanism was discussed on the basis of active‐species trapping experiments. The different photocatalytic activities of compounds 1 – 4 were explained by comparison of the band gaps of different POM species and different packing modes of POM units in these hybrid compounds.     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

Sandwich‐like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich‐structured host filled with continuous 2D catalysis–conduction interfaces. This MoN‐C‐MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high‐efficiency conversion on the two‐sided nitride polar surfaces, which are supplied with high‐flux electron transfer from the buried carbon interlayer. The 3D self‐assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN‐C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job‐synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high‐rate and long‐term cycling.     

Tuning Interfacial Cu‐O Atomic Structures for Enhanced Catalytic Applications

Cu₂O/CuO_x (x=0, 1) nanocomposites with well‐defined morphologies have been widely applied in catalytic reactions. However, people still understand less about tuning interfacial Cu‐O atomic structures for enhanced catalytic applications, and a special review on this topic has not been reported so far. Herein, we summarize our understanding on tuning interfacial Cu‐O atomic structures based on the literature, including the formation as well as evolution mechanism of Cu‐O interfaces in Cu₂O/CuO and Cu₂O/Cu systems, and the improved performances in the fields of CO oxidation, NO_x oxidation, photoelectrocatalysis, water gas shift reaction, photodegradation of organic dyes, hydrogen evolution, and photoreduction of CO₂. Finally, we briefly propose several potential research directions.     

Studies on the Phenol Oxidation with H2O2 Catalyzed by Metallomicelle Made from Crowned Schiff Base Mn(III) Complexes

Metallomicelles made from two Schiff base manganese(III) complexes (MnL¹ and MnL²) and surfactants (CTAB and Brij35) were used as mimetic peroxidase in the catalytic oxidation of phenol by H₂O₂. The catalytic activity of the complexes (MnL¹ and MnL²) were investigated. The mechanism and a kinetic mathematic model of the phenol catalytic oxidation were also studied. The results show the optimum acidity of the enzyme-like system in the paper is ca. pH 7.0, the optimum temperature which is ca. 35°C and the optimum molar ratio of H₂O₂ to the complex is ca. 30 in the complexes-H₂O₂-buffered solution; the Schiff base manganese(III) complexes and their metallomicelles as peroxidase mimics exhibit good catalytic activity and similar catalytic character to natural enzyme.     

Elementary steps of enzymatic oxidation of nifedipine catalyzed by horseradish peroxidase

The elementary steps of the enzymatic oxidation of nifedipine (NF) catalyzed by horseradish peroxidase (HRP) have been described based on analysis of kinetic magnetic field effects (MFEs). It has been shown that the first step of the catalytic cycle is single electron transfer resulting in formation of NF*(+) radical cation and ferroperoxidase (Per(2+)). As a result, comparison with an earlier studied oxidation reaction of NADH catalyzed by HRP evidenced that the enzymatic oxidations of two substrates-native, NADH, and its synthetic analogue, NF-catalyzed by HRP in the absence of H(2)O(2) follow identical mechanisms.     

Highly Efficient C?H Oxidative Activation by a Porous MnIII–Porphyrin Metal–Organic Framework under Mild Conditions

A simple strategy to rationally immobilize metalloporphyrin sites into porous mixed‐metal–organic framework (M′MOF) materials by a metalloligand approach has been developed to mimic cytochrome P450 monooxygenases in a biological system. The synthesized porous M′MOF of [Zn₂(MnOH–TCPP)(DPNI)] ? 0.5 DMF ? EtOH ? 5.5 H₂O ( CZJ‐1 ; CZJ=Chemistry Department of Zhejiang University; TCPP=tetrakis(4‐carboxyphenyl)porphyrin); DPNI=N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenetetracarboxydiimide) has the type of doubly interpenetrated cubic α‐Po topology in which the basic Zn₂(COO)₄ paddle‐wheel clusters are bridged by metalloporphyrin to form two‐dimensional sheets that are further bridged by the organic pillar linker DPNI to form a three‐dimensional porous structure. The porosity of CZJ‐1 has been established by both crystallographic studies and gas‐sorption isotherms. CZJ‐1 exhibits significantly high catalytic oxidation of cyclohexane with conversion of 94 % to the mixture of cyclohexanone (K) and cyclohexanol (A) (so‐called K–A oil) at room temperature. We also provided solid experimental evidence to verify the catalytic reaction that occurred in the pores of the M′MOF catalyst.     

Preparation of an Electrode Modified with an Electropolymerized Film as a Mediator of NADH Oxidation and Its Application in an Ethanol/O2 Biofuel Cell

This paper reports a novel mediator for the oxidation of β‐nicotinamide adenine dinucleotide (NAD⁺/NADH), an electropolymeric film (pAPRu) of [Ru(NH₂‐phen)₃]²⁺. A pAPRu‐modified electrode was prepared via electropolymerization and exhibited catalytic activity toward the electrochemical oxidation of NADH due to the imine moieties of pAPRu. The electrochemical oxidation of ethanol was observed using an alcohol dehydrogenase (ADH)‐immobilized electrode. A compartmentless ethanol/O₂ biofuel cell composed of an ADH anode and a bilirubin oxidase cathode was constructed. The maximum current density and the maximum power density of the biofuel cell were 190 µA cm^?2 and 31 µW cm^?2 (at 0.29 V), respectively.     

Two Unusual Two‐dimensional (4,4) Network Cadmium Coordination Polymers Based on Flexible Bis(triazole) and Rigid Benzenedicarboxylate Co‐ligands

Two cadmium(II) coordination polymers {[Cd(btp)(NO₂‐1,3‐bdc)(H₂O)]·H₂O}_n ( 1 ) and {[Cd(btp)(1,2‐bdc)(H₂O)]·H₂O}_n ( 2 ) were synthesized by the reaction of 1,3‐bis(1,2,4‐triazol‐1‐yl)propane (btp), 5‐nitroisophthalate (NO₂‐1,3‐bdc), and 1,2‐benzenedicarboxylate (1,2‐bdc). 1 consists of undulated 2D (4,4) networks. Two identical undulated layers are parallel stacking to give a (2D→2D) polythreaded 2D network. A 3D supramolecular architectute is constructed through the hydrogen bond interactions. 2 has an unusual 2D (4,4) network with a thickness of ca. 10 Å. The btp ligands exhibit the anti‐gauche conformation in 1 and the anti‐anti conformation in 2 . The flexible btp ligand exhibits the key role in the assembly of the topologies of 1 and 2 . The luminescence and thermal stability were investigated.     

New Entangled Coordination Networks Based on Charge‐Tunable Keggin‐Type Polyoxometalates

Investigation into a hydrothermal reaction system with transition‐metal (TM) ions, 1,4‐bis(1,2,4‐triazol‐1‐lmethyl)benzene (BBTZ) and various charge‐tunable Keggin‐type polyoxometalates (POMs) led to the preparation of four new entangled coordination networks, [Co^II(HBBTZ)(BBTZ)_2.5][PMo₁₂O₄₀] ( 1 ), [Cu^I(BBTZ)]₅[BW₁₂O₄₀] ? H₂O ( 2 ), [Cu^II(BBTZ)]₃[AsW^V₃W^VI₉O₄₀] ? 10 H₂O ( 3 ), and [Cu^II₅(BBTZ)₇(H₂O)₆][P₂W₂₂Cu₂O₇₇(OH)₂] ? 6 H₂O ( 4 ). All compounds were characterized by using elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. The mixed valence of W centers in compound 3 was further confirmed by using XPS spectroscopy and bond‐valence sum calculations. In the structural analysis, the entangled networks of 1 – 4 demonstrate zipper‐closing packing, 3D polythreading, 3D polycatenation, and 3D self‐penetration, respectively. Moreover, with the enhancement of POM negative charges and the use of different TM types, the number of nodes in the coordination networks of 1 – 4 increased and the basic metal–organic building motifs changed from a 1D zipper‐type chain (in 1 ) to a 2D pseudorotaxane layer (in 2 ) to a 3D diamond‐like framework (in 3 ) and finally to a 3D self‐penetrating framework (in 4 ). The photocatalytic properties of compounds 1 – 4 for the degradation of methylene blue under UV light were also investigated; all compounds showed good catalytic activity and the photocatalytic activity order of Keggin‐type species was initially found to be {XMo₁₂O₄₀}>{XW₁₂O₄₀}>{XW_12?nTM_nO₄₀}.     

A Stable Polyoxometalate‐Pillared Metal–Organic Framework for Proton‐Conducting and Colorimetric Biosensing

A stable metal–organic framework pillared by Keggin‐type polyoxometalate, Cu₆(Trz)₁₀(H₂O)₄[H₂SiW₁₂O₄₀]?8 H₂O (Trz=1,2,4‐triazole) ( 1 ), has been prepared under hydrothermal condition. The 2D layer structure with a 22‐member ring was formed by Cu²⁺ ions, which are connected with each other via the Trz ligands on the ab plane. Thus, the 2D layers are further interconnected through Keggin polyoxoanions to generate a 3D porous network with a small 1D channel. Moreover, the presence of polyoxoanions make it exhibit selective adsorption of water and proton‐conducting properties. Additionally it showed efficient intrinsic peroxidase‐like activity, providing a simple and sensitive colorimetric assay to detect H₂O₂.     

Online H/D exchange liquid chromatography as a support for the mass spectrometric identification of the oxidation products of melatonin

The hydrogen–deuterium exchange of protonated melatonin and its in vitro oxidation end‐products have been examined by liquid chromatography coupled with ion‐trap mass spectrometry. Specific H/D scrambling of protons in the C2 and C4 positions of the indole ring during gas‐phase fragmentation process was observed for both melatonin and its oxidation products. Collision‐induced dissociation spectra showed losses of variably deuterated NH₃, H₂O and CH₃CONH₂. In addition, a similar H/D scrambling behaviour was observed for the oxidation products, obtained from the opening of the indole ring by oxidative attack. Fragmentation pathways are proposed and H/D scrambling has been employed as a fingerprint, allowing identification of N¹‐acetyl‐5‐methoxykynurenin (AMK), N¹‐acetyl‐N²‐formyl‐5‐methoxykynurenin (AFMK), dehydro‐AFMK and hydroxymelatonin as the oxidation products of melatonin in vitro. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermal oxidative degradation of isotactic polypropylene catalyzed by copper and copper oxide interfaces

The oxidative degradation of isotactic polypropylene films coated on well-defined Cu(Cu₂O), CuO_0.67, and CuO films in a temperature range of 90–120°C in a quartz-spoon-gauge-reaction vessel was studied. This catalytic reaction has been compared with the oxidation of polypropylene without copper or oxide films. The reaction vessel contained, if needed, P₂O₅ and/or KOH as “getters” for H₂O and CO₂, these substances could be menitored continuously. Cu(Cu₂O) films were transformed during oxidation of the polymer to yellow CuO_0.67 below 100°C and above this temperature to black CuO in the presence of H₂O and CO₂, whereas in the absence of these compounds CuO was formed below 100°C and CuO_0.67 at 120°C. Characteristic autoxidation curves obtained in the absence of H₂O and CO₂ showed induction periods that were shorter for copper oxide-polymer interfaces than for glass-polymer interfaces (i.e., for uncatalyzed oxidation). Abnormalities were observed for Cu(Cu₂O)-polymer interfaces because of further oxidation of Cu during the reaction. The rates of oxygen consumption were faster for CuO_0.67-polymer and CuO-polymer than for the uncatalyzed reaction; the catalytic action of CuO_0.67 was somewhat larger than that of CuO. The important observation was made that the mechanism of oxidation is not the same in the absence and presence of reaction products; that is, H₂O and CO₂. This was confirmed by ion beam scattering experiments, which also revealed that an oxidation-reduction process takes place at Cu and their oxide interfaces. A mechanism for the catalytic oxidation process, based on the ease by which copper ions are released from the metal oxides at the interface, was formulated. These ions diffuse subsequently as actions of carboxylate anions into the bulk of the polymer. Arrhenius equations of oxygen consumption are given for all cases; the energy of activation calculated for the initiation of the uncatalyzed oxidation agrees with its literature value. The energy of activation for the initiation of the catalyzed reaction was a few kilocalories lower than that for the uncatalyzed reaction. Catalytic action is mainly operative for the initiation reaction at the interface and for the decomposition of hydroperoxides by copper ions. Preventing the delivery of copper ions to the polymer would be the most efficient way of inhibiting the catalysis.     

Platinum-Supported Zirconia Nanotube Arrays Supported on Graphene Aerogels Modified with Metal–Organic Frameworks: Adsorption and Oxidation of Formaldehyde at Room Temperature

Precious-metal catalysts (e.g., Au, Rh, Ag, Ru, Pt, and Pd) supported on transition-metal oxides (e.g., Al₂O₃, Fe₂O₃, CeO₂, ZrO₂, Co₃O₄, MnO₂, TiO₂, and NiO) can effectively oxidize volatile organic compounds. In this study, porous platinum-supported zirconia materials have been prepared by a “surface-casting” method. The synthesized catalysts present an ordered nanotube structure and exhibited excellent performance toward the catalytic oxidation of formaldehyde. A facile method, utilizing a boiling water bath, was used to fabricate graphene aerogel (GA), and the macroscopic 3D Pt/ZrO₂-GA was modified by introducing an adjustable MOF coating by a surface step-by-step method. The unblocked mesoporous structure of the graphene aerogel facilitates the ingress and egress of reactants and product molecules. The selected 7 wt.% Pt/ZrO₂-GA-MOF-5 composite demonstrated excellent performance for HCHO adsorption. Additionally, this catalyst achieved around 90 % conversion when subjected to a reaction temperature of 70 °C (T_{90 %}=70 °C). The Pt/ZrO₂-GA-MOF-5 composite induces a catalytic cycle, increasing the conversion by simultaneously adsorbing and oxidizing HCHO. This work provides a simple approach to increasing reactant concentration on the catalyst to increase the rate of reaction.     

Study of the Electrochemical Behavior of Disperse Blue 1‐Modified Graphite Electrodes. Application to the Flow Determination of NADH

The preparation and the electrochemical study of Disperse Blue 1‐chemically modified electrodes (DB1‐CME), as well as their efficiency for the electrocatalytic oxidation of NADH is described. The proposed mediator was immobilized by physical adsorption onto graphite electrodes. The electrochemical behavior of DB1‐CME was studied with cyclic voltammetry. The electrochemical redox reaction of DB1 was found to be reversible, revealing two well‐shaped pair of peaks with formal potentials 152 and ?42 mV, respectively, (vs. Ag/AgCl/3M KCl) at pH 6.5. The current I_p has a linear relationship with the scan rate up to 800 mV s^?1, which is indicative for a fast electron transfer kinetics. The dissociation constants of the immobilized DB1 redox couple were calculated pK₁=4 and pK₂=5. The electrochemical rate constants of the immobilized DB1 were calculated k₁°=18 s^?1 and k₂°=23 s^?1 (Γ=2.36 nmol cm^?2). The modified electrodes were mounted in a flow injection manifold, poised at +150 mV (vs. Ag/AgCl/3M KCl) and a catalytic current due to the oxidation of NADH was measured. The reproducibility was 1.4% RSD (n=11 for 30 μM NADH) The behavior of the sensor towards different reducing compounds was investigated. The sensor exhibited good operational and storage stability.     

Trinuclear Pd3O2 Intermediate in Aerobic Oxidation Catalysis

The activation of O₂ is a key step in selective catalytic aerobic oxidation reactions mediated by transition metals. The bridging trinuclear palladium species, [(LPd^II)₃(μ³‐O)₂]²⁺ (L=2,9‐dimethylphenanthroline), was identified during the [LPd(OAc)]₂(OTf)₂‐catalyzed aerobic oxidation of 1,2‐propanediol. Independent synthesis, structural characterization, and catalytic studies of the trinuclear compound show that it is a product of oxygen activation by reduced palladium species and is a competent intermediate in the catalytic aerobic oxidation of alcohols. The formation and catalytic activity of the trinuclear Pd₃O₂ species illuminates a multinuclear pathway for aerobic oxidation reactions catalyzed by Pd complexes.