Methods of multivariate data analysis applied to the investigation of fen soils

Fen soils from two sites of the Rhin-Havel-Luch, a peatland in the north-east of Germany, have been investigated. The samples have been collected in two horizons, representing different degrees of degradation and mineralisation of peat. Gravimetric measurements, energy dispersive X-ray fluorescence (EDXRF), elemental analysis, and ¹H low resolution nuclear magnetic resonance (LR-NMR) of the fen soil samples have been performed. By multivariate analysis of all the experimental data, especially by the principal component analysis (PCA) and by the cluster analysis, respectively, it was possible to classify the fen soils, to identify their characteristic properties, to detect temporal and local variations, and to prove representative field sampling. Furthermore, the correlation between variables of the applied analytical methods could be interpreted in context to the composition of fen soils and mutual influences of their properties.     

Multiresidue determination of pesticides in acid-clay soils from Thailand

Tropical and temperate soils differ with respect to their chemical conditions and mineral composition. Consequently, assessment of the contamination of tropical soils with pesticides requires methods that provide exhaustive extraction from the specific soil matrix and reliable quantification. Our objective was to optimize the simultaneous extraction and determination of 32 representative pesticides (organophosphates, organochlorines, synthetic pyrethroids, triazines, acetamides, carbamates, diphenyl ethers, acylalanines, oxadiazoles, thiadiazoles, and phenoxy compounds) frequently used in Thailand. The compounds were added to a clayey Ultisol-topsoil (45% clay) from the Yom Region in Northern Thailand. Ten different solvent mixtures were tested; the use of a shake extraction with acetone-ethyl acetate-water (3 + 1 + 1, v/v/v) was most effective in providing exhaustive and reproducible extraction of pesticides both from freshly fortified soil and from fortified soil after incubation for 14-28 days. The pesticides were separated and quantified by using gas chromatography with mass selective detection. Except for methamidophos, which was almost completely lost during sample workup, the recoveries of all pesticides from soil ranged from 68.6 to 104% (mean standard error, 2.8%) for freshly spiked samples and from 45.9 to 107% (mean standard error, 2.3%) for spiked samples incubated for 14 days. The use of internal standards compensated for the losses of most pesticides during workup and increased the mean recovery of the pesticides from freshly fortified soil to 96%. The method was successfully applied to the determination of environmental concentrations of pesticides in a range of Thai agricultural soils.     

Simultaneous multi-residue pesticide analysis in soil samples with ultra-high-performance liquid chromatography–tandem mass spectrometry using QuEChERS and pressurised liquid extraction methods

To assess soil contamination, it is important to be able to measure different classes of pesticides simultaneously. For this reason we developed a sensitive ultra-high-performance liquid chromatography–tandem mass spectrometry method for the simultaneous analysis of 25 pesticides in soil samples. Multi-class pesticides (triazines, phenylureas, phenoxy acid pesticides etc.) were analysed using a single mass spectrometry method with a fast polarity switching option, allowing the analysis of 19 compounds in the positive ionisation mode and six compounds in the negative ionisation mode. Extraction of pesticides from soil samples was performed employing a pressurised liquid extraction (PLE) and a quick, easy, cheap, effective, rugged and safe (QuEChERS) procedure, recently developed for the extraction of multi-residue pesticides from food matrices. The extraction efficiency, performance and recoveries of these two procedures were evaluated and compared. In addition, we studied the effect of matrix on signal suppression or enhancement. Isotope-labelled internal standards (ILIS) were used to compensate the suppression or enhancement of signal intensities in the extracted samples. The method was validated using reference soil material (EUROSOIL 7) spiked with 50 μg/kg of each pesticide. The average recovery by PLE varied between 65.1% and 122.2% with RSDs of 1.7–23.4%. QuEChERS provided better recoveries for most of the pesticides, the extraction recovery ranging from 79.4% to 113.3% with RSDs of 1.0–12.2%. Limits of quantification for all target compounds were within a range of 0.1–2.9 µg/kg.     

Chemometric investigations on the representativity of soil sampling

Summary The characterization of the heavy metal contents of a soil area is carried out by narrow screening sampling and subsequent analysis. It is possible by means of the univariate variance analysis to detect significant alterations within the tested area. The position and extent of multivariate changes of the features can be characterized more exactly with the help of multivariate statistical methods such as the combination of cluster and discriminant analytical methods or the principal component analysis. The maximum possible distance between two sampling points is determined by calculation of the autocorrelation function of the features. The number of soil samples, which is necessary for precisely determining the heavy metal contents of the investigated area, can be derived therefrom. With the help of the multivariate autocorrelation function the distance for the representative sampling of the multivariate loads by heavy metals can be described.     

Pesticide residues in groundwaters and soils of agricultural areas in the Águeda River Basin from Spain and Portugal

This research has evaluated the agricultural impact of the use of pesticides in small agricultural areas in the Águeda river basin, which straddles the Spanish-Portuguese border. Sixteen pesticides frequently used in the area, including herbicides, fungicides and insecticides and some of their degradation products, were monitored in 52 groundwater samples and 42 soil samples taken around them, using a developed multi-residual analytical method based on SPE-LC-MS. Sampling was carried out in two different seasons (winter and summer). The results indicated the presence of pesticides at several levels, both in groundwaters and soils. Thirteen of the pesticides studied were detected in one or more of the groundwater samples analysed, but only three pesticides were detected in the soil samples. Terbuthylazine, cyprodinil, tebuconazole and chlorpyrifos were the pesticides most frequently detected in groundwaters, whereas terbuthylazine, metalaxyl and tebuconazole were the sole compounds detected in soils. The distribution of the concentrations in groundwaters indicated that up to 80% and 70% of the samples collected in the summer on the Spanish and Portuguese sides, respectively, exceed the quality standards of 0.1 µg L^?1 for one or more individual compounds and, in turn, up to 64% and 40% exceed the quality standards of 0.5 µg L^?1 for all compounds. The presence of pesticide residues in the groundwaters and soils analysed may well be explained by the use of these compounds in agricultural practices.     

Assessment of pesticide contamination in soil samples from an intensive horticulture area, using ultrasonic extraction and gas chromatography-mass spectrometry

In order to reduce the amount of sample to be collected and the time consumed in the analytical process, a broad range of analytes should be preferably considered in the same analytical procedure. A suitable methodology for pesticide residue analysis in soil samples was developed based on ultrasonic extraction (USE) and gas chromatography–mass spectrometry (GC–MS). For this study, different classes of pesticides were selected, both recent and old persistent molecules: parent compounds and degradation products, namely organochlorine, organophosphorous and pyrethroid insecticides, triazine and acetanilide herbicides and other miscellaneous pesticides. Pesticide residues could be detected in the low- to sub-ppb range (0.05–7.0 μg kg⁻¹) with good precision (7.5–20.5%, average 13.7% R.S.D.) and extraction efficiency (69–118%, average 88%) for the great majority of analytes. This methodology has been applied in a monitoring program of soil samples from an intensive horticulture area in Póvoa de Varzim, North of Portugal. The pesticides detected in four sampling programs (2001/2002) were the following: lindane, dieldrin, endosulfan, endosulfan sulfate, 4,4′-DDE, 4,4′-DDD, atrazine, desethylatrazine, alachlor, dimethoate, chlorpyrifos, pendimethalin, procymidone and chlorfenvinphos. Pesticide contamination was investigated at three depths and in different soil and crop types to assess the influence of soil characteristics and trends over time.     

Combination of microwave assisted micellar extraction and liquid chromatography for the determination of organophosphorous pesticides in soil samples

A new methodology based on the microwave assisted micellar extraction (MAME) technique has been optimised, using soil samples, to extract and determine a mixture of the eight organophosphorous pesticides mainly used in agriculture. The pesticides under study have been extracted using the non-ionic surfactants polyoxyethylene 10 lauryl ether (POLE) and oligoethylene glycol monoalkyl ether (Genapol X-080). The optimal extraction variables, such as surfactant concentration, pH, radiation time and microwave power were determined for each surfactant. The results show the advantage of using POLE instead of Genapol X-080 for the extraction of the organophosphorus pesticides with recoveries higher than 70% for most of the compounds and relative standard deviations (RSD) below 2.6%. This method was successfully applied to fresh samples as well as to aged samples for the analysis of soils with different characteristics and compared with the traditional Soxhlet technique.     

Development of a procedure for the multiresidue analysis of pesticides in vineyard soils and its application to real samples

A procedure for multiresidue analysis was developed for the extraction and determination of 17 pesticides, including herbicides, fungicides, and insecticides, as well as certain degradation products, in vineyard soils from La Rioja region (Spain). Different solvents and mixtures were tested in spiked pesticide‐free soils, and pesticides were comparatively evaluated by gas chromatography with mass spectrometry and liquid chromatography with mass spectrometry. Recoveries >70%, with relative standard deviations <9%, were obtained when a mixture of methanol/acetone or a mixture of methanol/CaCl₂ 0.01 M for the most polar compounds was selected as the extraction solvent. Method validation was accomplished with acceptable linearity (r² ≥ 0.987) within the concentration range of 0.005–1 μg/mL corresponding to 1.667–333.4 μg/kg and 0.835–167.1 μg/kg for liquid chromatography with mass spectrometry and gas chromatography with mass spectrometry, respectively, and detection limits <0.4 μg/kg for the compounds were studied. The extraction method was applied to 17 real vineyard soil samples, and terbuthylazine and its metabolite desethylterbuthylazine were the most ubiquitous compounds, as they were detected in the 100% of the soils analyzed. The presence of fungicides was also high, and the presence of insecticides was lower than other pesticides. The results confirm the usefulness of the optimized procedure for monitoring residues in vineyard soils.     

Feasibility of application of conductometric biosensor based on acetylcholinesterase for the inhibitory analysis of toxic compounds of different nature

This study was aimed at the development of a conductometric biosensor based on acetylcholinesterase considering the feasibility of its application for the inhibitory analysis of various toxicants. In this paper, the optimum conditions for enzyme immobilization on the transducer surface are selected as well as the optimum concentration of substrate for inhibitory analysis. Sensitivity of the developed biosensor to different classes of toxic compounds (organophosphorus pesticides, heavy metal ions, surfactants, aflatoxin, glycoalkaloids) was tested. It is shown that the developed biosensor can be successfully used for the analysis of pesticides and mycotoxins, as well as for determination of total toxicity of the samples. A new method of biosensor analysis of toxic substances of different classes in complex multicomponent aqueous samples is proposed.     

Optimization of supercritical fluid extraction of pesticide residues in soil by means of central composite design and analysis by gas chromatography-tandem mass spectrometry

An environmentally friendly methodology is proposed for the analysis of pesticides in soil samples based on supercritical fluid extraction (SFE) and analysis at high selectivity and sensitivity, by gas chromatography-tandem mass spectrometry (GC-MS-MS). The pesticides investigated are among the most commonly used in intensive horticulture activities comprising organochlorine and organophosphorous insecticides, triazine and acetanilide herbicides, amongst others. An experimental design approach was used for modelling SFE and optimised extraction conditions were derived for the total pesticides extraction or for specific sub-groups of interest. Pesticide residues could be detected in soils in the sub-ppb range (0.1-3.7microgkg(-1)), with quite good precision (4.2-15.7%) and extraction efficiency (80.4-106.5%). The analysis of soil samples from an intensive horticulture area in Póvoa de Varzim, north of Portugal, revealed the presence of persistent pesticides, parent compounds and degradation products among the following: endosulfan, endosulfan sulfate, dieldrin, 4,4'-DDE, 4,4'-DDD, atrazine, alachlor, metolachlor, chlorpyrifos, pendimethalin and lindane. The important features to point out are the easy interpretation of chromatograms and straightforward confirmation of analytes that greatly facilitates the analyst judgement on the contamination of the sample.     

Determination of pesticide residues by GC-MS using analyte protectants to counteract the matrix effect.

An analytical method was developed to determine pesticides of various chemical classes in soil, juice and honey using analyte protectants to counteract the enhancement of the chromatographic response produced by the presence of matrix components (matrix effect). This effect was more pronounced for soil and honey samples than for juice samples; regarding the pesticide chemical class, organochlorine pesticides were less affected by the presence of matrix components than triazines and organophosphorus pesticides. Several analyte protectants (2,3-butanediol, L-gulonic acid gamma-lactone, corn oil and olive oil) were tested for counteracting the observed matrix effect. L-Gulonic acid gamma-lactone was an effective protecting agent for most of the pesticides studied in soil and honey samples, whereas olive oil was very effective for juice samples. The combination of these two protectants was found to be an effective analyte protectant for all compounds in soil and honey samples.     

Multiresidue method using SPME for the determination of various pesticides with different volatility in confined atmospheres

An analytical method is described for assessing the vapour concentration of 11 pesticides (bioallethrin, chlorpyriphos methyl, folpet, malathion, procymidone, quintozene, chlorothalonil, fonofos, penconazole and trimethacarb) in confined atmospheres (e.g. a greenhouse after pesticide application). This study is a successful extension of a method previously developed by the authors for dichlorvos to much less volatile pesticides. Sampling was performed by using polydimethylsiloxane–solid phase micro-extraction (PDMS–SPME) fibres immersed in a 250-mL sampling flask through which air samples were dynamically pumped from the analysed atmosphere. After a 40-min sampling duration, samples were analysed by GC/MS.Calibration was performed from a vapour-saturated air sample. The linearity of the observed signal versus pesticide concentration in the vapour phase was proved from spiked liquid samples whose headspace concentrations were measured by using the proposed method. This procedure gave calibration curves with regression coefficients (R²) greater than 0.98, and the repeatability of these measurements was found with RSDs of 1.9–7.6%. As a field application test, this analysis procedure was used for the determination of gaseous procymidone concentrations as a function of time in the atmosphere of an experimental 8-m² and 20-m³ greenhouse. The pesticide was sprayed according to real cultivation conditions, and measurements were made for 80 h after application (8 measurements). The observed concentrations found ranged from 200 to 500 µg m^–3, thus indicating the level of contamination of the air breathed by people in such working conditions.Abbreviations GC/MS gas chromatography/mass spectrometry - SIM selective ion monitoring - FC43 perfluorotributylamine - RSD relative standard deviation - LOD limit of detection - LOQ limit of quantification     

Analytical investigations and chemometrical characterization of polluted soils

Summary Soil samples were taken in the surroundings of an industrial plant with heavy metal emission. A convenient digestion method for the determination of the mobile anthropogenic part of the heavy metal contents of soils was selected. This heavy metal contents were determined by atomic absorption spectrometry. The application of different multivariate statistical methods such as cluster analysis, multi-dimensional variance and discriminant analysis and factor analysis enables the objective characterization of polluted areas and of the degree of pollution as well as the identification of emission sources.     

Development and validation of a multiresidue method for determination of 37 pesticides in soil using GC-NPD

In this study, a multiresidue analytical method for the detection of 37 pesticides in a soil matrix was developed and validated. The soil sample was fortified with a known quantity of pesticides at two different concentration levels (0.1 and 0.01 µg/g) and the analytes were extracted via a liquid–solid extraction method. The pesticides were separated on an HP5 capillary column and were analyzed with a gas chromatograph coupled to a nitrogen–phosphorous detector (GC‐NPD). Method validation was accomplished with good linearity (r² = 0.994–0.999) within a considerable range of concentrations. Satisfactory recoveries (70.5–110.4%) were obtained with 32 pesticides at both spiking concentration levels, whereas five pesticides—dimepiperate, buprofezin, prometryn, pirimicarb, and fludioxonil—were recovered at relatively low levels (43.6–61.8%). The applicability of the method was demonstrated by analyzing field samples collected from 24 different sites around Yeongsan and Sumjin rivers in the Republic of Korea. No residues of the selected pesticides were detected in any of the samples. The developed method could be employed as a simple and cost‐effective method for the routine detection and analysis of 37 pesticides in soil samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Soil Type and Herbicides Adsorption

Abstract

Herbicides behaviour in soils greatly depends on adsorption through its influence on degradation and movement. The adsorption intensity depends on both the chemical structure of pesticides, the nature of soil constituents and soil physico-chemical factors such as the pH. In this paper, the role played by these factors is analysed and used to evaluate the possible use of soil surveys for assessing adsorption behaviour of pesticides in soils. The analysis is based on adsorption measurements of three herbicides (atrazine, terbutryn and 2,4-D) by several soils differing in their mineralogical composition, organic matter content and pH. Using statistical analysis, it is shown that some relations can be defined between soil types and adsorption behaviour. These relations are strongly dependent on the electrical state of the herbicide molecule (cationic, anionic and neutral).     

Chemometrical investigation of the presence and distribution of organochlorine and polyaromatic compounds in sediments of the Ebro River Basin

A multivariate statistical data analysis, using principal component analysis, of historical data from 1996 to 2003 concerning the concentration of different polycyclic aromatic hydrocarbons and organochlorine compounds in sediment samples from different sampling sites of the Ebro River Basin was performed under the UE funded project AQUATERRA. Three major contamination sources were identified and their composition and distribution profiles were resolved. The first contamination profile was mostly loaded by polycyclic aromatic hydrocarbons, the second contamination profile was loaded by some organochlorine compounds and the third contamination profile was more specifically loaded by naphthalene. Samples from the different geographical regions of the Ebro River Basin were grouped according to the contamination described by these three major profiles.     

Detecting trace pesticides in real time using single particle aerosol mass spectrometry

Pesticides are toxic substances and may cause unintentional harm if improperly used. The ubiquitous nature of pesticides, with frequent use in agriculture and the household, and the potential for harm that pesticides pose to non-target organisms such as wildlife, humans, and pets, demonstrate the need for rapid and effective detection and identification of these compounds. In this study, single particle aerosol mass spectrometry (SPAMS) was used to rapidly detect compounds from four classes of pesticides commonly used in agricultural and household applications. These include permethrin (pyrethroid class), malathion and dichlorvos (organophosphate class), imidacloprid (chloronicotinyl class), and carbaryl (carbamate class). Analytical standards of each compound were diluted and aerosolized using a nebulizer to create particles for analysis in the SPAMS instrument. The resultant dual-polarity time-of-flight mass spectra were then analyzed to identify the characteristic peaks of the compound in each sample. In addition, samples of commercial products containing pesticides, a commercial insecticide spray, containing permethrin, and a canine flea collar, containing carbaryl, were analyzed in their original form using SPAMS without any significant sample preparation. The characteristic mass spectral peaks of the active pesticides in these samples were identified using the mass spectra obtained earlier from the pesticide analytical standards. By successfully identifying pesticides in analytical standards and in commercial products, it is demonstrated herein that the SPAMS system may be capable of pesticide detection in numerous environmental and agricultural situations.     

Determination of pesticides in soil samples by supercritical fluid chromatography-atmospheric pressure chemical ionisation mass spectrometric detection

This paper presents an analytical technique for the determination of pesticides in soil by packed-column supercritical fluid chromatography interfaced with atmospheric pressure chemical ionisation mass spectrometry (pSFC-APCI-MS). The technique provides a versatile method for the detection and quantification of pesticides belonging to three different commonly used classes, triazines (ametryne, atrazine), carbamates (carbofuran) and sulfonylureas (chlorsulfuron, metsulfuron methyl and benzsulfuron methyl). The APCI mass spectra for all the pesticides studied consisted of protonated molecule ions as the most abundant ion at low cone voltages, except for metsulfuron methyl and benzsulfuron methyl, which gave a fragment ion as the most abundant ion with the protonated molecule ion at low intensity. Increasing the cone voltage provided informative fragmentation patterns for all species. The technique shows good linearity over the concentration range of 0.1-50 micrograms ml-1, with r2 values as follows: atrazine 0.997, ametryne 0.995, carbofuran 0.999, benzsulfuron methyl 0.999, chlorsulfuron 0.995 and metsulfuron methyl 0.997. The detection limits in the selected ion mode were atrazine 201, ametryne 144 and carbofuran 385 pg, which were calculated by using the standard solution, and benzsulfuron methyl 2.045, chlorsulfuron 1.435 and metsulfuron methyl 2.414 ng, which were determined by using spiked soil samples. The pSFC-MS system was shown to have a high degree of reproducibility. The technique was then applied to the determination of the above pesticides in soil samples. The results obtained show that there is no matrix effect from the soil and that the detection limits for all pesticides in soil were similar to those found for the standard solutions.     

快速溶剂萃取-气相色谱-串联质谱法同时测定土壤中有机氯及有机磷农药

建立了快速溶剂萃取（ASE）-气相色谱-串联质谱（GC-MS/MS）同时分析土壤中8种有机氯农药（OCPs）和5种有机磷农药（OPPs）的方法。样品由正己烷-丙酮（1：1,v/v）溶液萃取,经无水硫酸钠脱水、氮吹仪浓缩后,采用硅胶（Si）固相萃取小柱进行净化,正己烷-丙酮（1：1,v/v）溶液进行洗脱,然后经HP-5MS色谱柱（30 m×0.25 mm×0.25 μm）分离,在电子轰击电离源下以多反应监测（MRM）模式进行检测,内标法定量。分析结果表明,13种目标物在1.00~100 μg/L范围内线性关系良好,相关系数（R）大于0.995;加标回收率为66.8%~88.4%,能够实现准确定量;日内精密度与日间精密度均小于10%。当取样量为10.0 g时,8种OCPs的方法检出限为0.02~0.04 μg/kg,5种OPPs的方法检出限为0.06~0.12 μg/kg,能够满足土壤农药残留的检测要求。