Discrete wavelets transform for signal denoising in capillary electrophoresis with electrochemiluminescence detection

Discrete wavelets transform (DWT) was applied to noise on removal capillary electrophoresis-electrochemiluminescence (CE-ECL) electropherograms. Several typical wavelet transforms, including Haar, Daublets, Coiflets, and Symmlets, were evaluated. Four types of determining threshold methods, fixed form threshold, rigorous Stein's unbiased estimate of risk (rigorous SURE), heuristic SURE and minimax, combined with hard and soft thresholding methods were compared. The denoising study on synthetic signals showed that wave Symmlet 4 with a level decomposition of 5 and the thresholding method of heuristic SURE-hard provide the optimum denoising strategy. Using this strategy, the noise on CE-ECL electropherograms could be removed adequately. Compared with the Savitzky-Golay and Fourier transform denoising methods, DWT is an efficient method for noise removal with a better preservation of the shape of peaks.     

Wavelet transforms in separation science for denoising and peak overlap detection

Wavelet transform is a versatile time‐frequency analysis technique, which allows localization of useful signals in time or space and separates them from noise. The detector output from any analytical instrument is mathematically equivalent to a digital image. Signals obtained in chemical separations that vary in time (e.g., high‐performance liquid chromatography) or space (e.g., planar chromatography) are amenable to wavelet analysis. This article gives an overview of wavelet analysis, and graphically explains all the relevant concepts. Continuous wavelet transform and discrete wavelet transform concepts are pictorially explained along with their chromatographic applications. An example is shown for qualitative peak overlap detection in a noisy chromatogram using continuous wavelet transform. The concept of signal decomposition, denoising, and then signal reconstruction is graphically discussed for discrete wavelet transform. All the digital filters in chromatographic instruments used today potentially broaden and distort narrow peaks. Finally, a low signal‐to‐noise ratio chromatogram is denoised using the procedure. Significant gains (>tenfold) in signal‐to‐noise ratio are shown with wavelet analysis. Peaks that were not initially visible were recovered with good accuracy. Since discrete wavelet transform denoising analysis applies to any detector used in separation science, researchers should strongly consider using wavelets for their research.     

Improving liquid chromatography–tandem mass spectrometry determinations by modifying noise frequency spectrum between two consecutive wavelet-based low-pass filtering procedures

This paper employs one chemometric technique to modify the noise spectrum of liquid chromatography–tandem mass spectrometry (LC–MS/MS) chromatogram between two consecutive wavelet-based low-pass filter procedures to improve the peak signal-to-noise (S/N) ratio enhancement. Although similar techniques of using other sets of low-pass procedures such as matched filters have been published, the procedures developed in this work are able to avoid peak broadening disadvantages inherent in matched filters. In addition, unlike Fourier transform-based low-pass filters, wavelet-based filters efficiently reject noises in the chromatograms directly in the time domain without distorting the original signals. In this work, the low-pass filtering procedures sequentially convolve the original chromatograms against each set of low pass filters to result in approximation coefficients, representing the low-frequency wavelets, of the first five resolution levels. The tedious trials of setting threshold values to properly shrink each wavelet are therefore no longer required. This noise modification technique is to multiply one wavelet-based low-pass filtered LC–MS/MS chromatogram with another artificial chromatogram added with thermal noises prior to the other wavelet-based low-pass filter. Because low-pass filter cannot eliminate frequency components below its cut-off frequency, more efficient peak S/N ratio improvement cannot be accomplished using consecutive low-pass filter procedures to process LC–MS/MS chromatograms. In contrast, when the low-pass filtered LC–MS/MS chromatogram is conditioned with the multiplication alteration prior to the other low-pass filter, much better ratio improvement is achieved. The noise frequency spectrum of low-pass filtered chromatogram, which originally contains frequency components below the filter cut-off frequency, is altered to span a broader range with multiplication operation. When the frequency range of this modified noise spectrum shifts toward the high frequency regimes, the other low-pass filter is able to provide better filtering efficiency to obtain higher peak S/N ratios. Real LC–MS/MS chromatograms, of which typically less than 6-fold peak S/N ratio improvement achieved with two consecutive wavelet-based low-pass filters remains the same S/N ratio improvement using one-step wavelet-based low-pass filter, are improved to accomplish much better ratio enhancement 25-folds to 40-folds typically when the noise frequency spectrum is modified between two low-pass filters. The linear standard curves using the filtered LC–MS/MS signals are validated. The filtered LC–MS/MS signals are also reproducible. The more accurate determinations of very low concentration samples (S/N ratio about 7–9) are obtained using the filtered signals than the determinations using the original signals.     

Noise filtering and deconvolution of XPS data by wavelets and Fourier transform

In experimental sciences, the recorded data are often modelled as the noisy convolution product of an instrumental response with the ‘true’ signal to find. Different models have been used for interpreting x‐ray photoelectron spectroscopy (XPS) spectra. This article suggests a method of estimate the ‘true’ XPS signal that relies upon the use of wavelets, which, because they exhibit simultaneous time and frequency localization, are well suited to signal analysis. First, a wavelet shrinkage algorithm is used to filter the noise. This is achieved by decomposing the noisy signal into an appropriate wavelet basis and then thresholding the wavelet coefficients that contain noise. This algorithm has a particular threshold related to frequency and time. Secondly, the broadening due to the instrumental response is eliminated through a deconvolution process similar to that developed in the previous paper in this series for the analysis of HREELS data. This step mainly rests on least‐squares and on the existing relation between the Fourier transform, the wavelet transform and the convolution product. Copyright © 2004 John Wiley & Sons, Ltd.     

Minimisation of instrumental noise in the acquisition of FT-NIR spectra of bread wheat using experimental design and signal processing techniques

Spectral resolution (R) and number of repeated scans (S) have a significant effect on the S/N ratio of Fourier transform-near infrared (FT-NIR) spectra, but the optimal values of these two parameters have to be determined empirically for a specific problem, considering separately both the nature of the analysed matrix and the specific instrumental setup. To achieve this aim, the instrumental noise of replicated FT-NIR spectra of wheat samples was modelled as a function of R and S by means of the Doehlert design. The noise amounts in correspondence to different experimental conditions were estimated by analysing the variance signals derived from replicate measurements with two different signal processing tools, Savitzky–Golay (SG) filtering and fast wavelet transform (FWT), in order to separate the “pure” instrumental noise from other variability sources, which are essentially connected to sample inhomogeneity. Results confirmed that R and S values leading to minimum instrumental noise can vary considerably depending on the type of analysed food matrix and on the different instrumental setups, and helped in the selection of the optimal measuring conditions for the subsequent acquisition of a wide spectral dataset.     

Sub-optimal wavelet denoising of coaveraged spectra employing statistics from individual scans

This paper proposes a novel wavelet denoising method, which exploits the statistics of individual scans acquired in the course of a coaveraging process. The proposed method consists of shrinking the wavelet coefficients of the noisy signal by a factor that minimizes the expected square error with respect to the true signal. Since the true signal is not known, a sub-optimal estimate of the shrinking factor is calculated by using the sample statistics of the acquired scans. It is shown that such an estimate can be generated as the limit value of a recursive formulation. In a simulated example, the performance of the proposed method is seen to be equivalent to the best choice between hard and soft thresholding for different signal-to-noise ratios. Such a conclusion is also supported by an experimental investigation involving near-infrared (NIR) scans of a diesel sample. It is worth emphasizing that this experimental example concerns the removal of actual instrumental noise, in contrast to other case studies in the denoising literature, which usually present simulations with artificial noise. The simulated and experimental cases indicate that, in classic denoising based on wavelet coefficient thresholding, choosing between the hard and soft options is not straightforward and may lead to considerably different outcomes. By resorting to the proposed method, the analyst is not required to make such a critical decision in order to achieve appropriate results.     

微流控电泳芯片中化学发光信号的分段门限小波降噪

采用分段门限小波降噪(STWD)方法对化学信号中的异方差噪声进行降噪处理.用STWD法和统一门限小波降噪法同时处理两种模拟信号(其中之一包含异方差噪声).结果显示,优化参数的STWD法能够更有效地提高降噪效果.采用STWD法对微流控芯片化学发光检测信号中的异方差噪声进行处理,取得了满意的降噪效果.     

一种新的小波滤波方法在化学谱图信号滤噪中的应用

仪器分析测定中，噪声的存在往往影响分析的准确度和仪器的检出限。小波变换多分辨分析的特性使得它成为一种很好的滤噪方法。基于小波分解后信号与噪声的小波系数随尺度变化规律不同的特性，提出了一种新的滤波滤方法-空域相关法，即通过不同尺度上相关系数模值与小波系数模模值的比较，达到滤波滤的目的。本文提出的方法具有无需人为选定无需人为选定滤噪阈值和小波函数、方法简单、失真度小等优点，可以大在提高信号的信噪比。模拟数据和ICP-AES实验数据证明了该方法的有效性。     

Adaptive approach for variable noise suppression on laser-induced breakdown spectroscopy responses using stationary wavelet transform

Spectral signals are often corrupted by noise during their acquisition and transmission. Signal processing refers to a variety of operations that can be carried out on measurements in order to enhance the quality of information. In this sense, signal denoising is used to reduce noise distortions while keeping alterations of the important signal features to a minimum. The minimization of noise is a highly critical task since, in many cases, there is no prior knowledge of the signal or of the noise. In the context of denoising, wavelet transformation has become a valuable tool. The present paper proposes a noise reduction technique for suppressing noise in laser-induced breakdown spectroscopy (LIBS) signals using wavelet transform. An extension of the Donoho's scheme, which uses a redundant form of wavelet transformation and an adaptive threshold estimation method, is suggested. Capabilities and results achieved on denoising processes of artificial signals and actual spectroscopic data, both corrupted by noise with changing intensities, are presented. In order to better consolidate the gains so far achieved by the proposed strategy, a comparison with alternative approaches, as well as with traditional techniques, is also made.     

Spatially adaptive stationary wavelet thresholding for the denoising of DNA capillary electrophoresis signal

The spatially adaptive thresholding based on the stationary wavelet transform was applied to the noise removal in the signal of DNA separated and determined by capillary electrophoresis. The threshold is derived in a Bayesian framework, and previously used on the wavelet coefficients is the generalized Gaussian distribution. The threshold is simple and closed form, which is adaptive to each subband because it depends on data-driven estimates of the parameters. Using this strategy, the noise in the signal of the DNA-separated analysis by capillary electrophoresis could be removed adequately. Experimental results show that the proposed denoising method is effective, and the spatially adaptive thresholding yields a lower root-mean-square error than the universal thresholding. The text was submitted by the authors in English.     

自适应中值滤波用于色谱信号去噪的研究

在分析化学领域中，如何从被干扰的信号中有效去除噪声并恢复有用信号，具有重要的意义。此文从中值滤波基本概念出发，针对经典中值滤波器滑动窗口长度固定对信号去噪的影响，提出了自适应中值滤波器，通过对某元素色谱曲线进行去噪处理，并与移动均值法和小波变换法进行比较表明，此方法不仅能有效地滤除脉冲和高斯噪声，而且使色谱峰的边缘得到良好保护，从而提高了色谱数据分析的精确性。     

Enhancement of the Nuclear Spin Noise Signal Using Wavelet Transform

Spin noise spectroscopy has attracted considerable attention recently owing partly to intrinsic interest in the phenomenon and partly to its significant application potential. Here, we address the inherent problem of low sensitivity of nuclear spin noise and examine the utility of wavelet transform to mitigate this problem by distinguishing real peaks from the noise contaminated data. Suppression of the random circuit noise and the consequent enhancement of the correlated nuclear spin noise signal have been demonstrated with discrete wavelet transform. Spectra of both ¹H and ¹³C nuclear spins have been considered and significant signal enhancements in both the cases have been observed. A detailed analysis of several possible wavelet, thresholding and decomposition solutions have been made to obtain the optimum condition for signal enhancement. It is observed that the application of wavelet transform leaves the spin noise signal line shape essentially unchanged, which is an advantage for several applications involving spin noise spectra.     

Adaptive wavelet transform suppresses background and noise for quantitative analysis by Raman spectrometry

Discrete wavelet transform (DWT) provides a well-established means for spectral denoising and baseline elimination to enhance resolution and improve the performance of calibration and classification models. However, the limitation of a fixed filter bank can prevent the optimal application of conventional DWT for the multiresolution analysis of spectra of arbitrarily varying noise and background. This paper presents a novel methodology based on an improved, second-generation adaptive wavelet transform (AWT) algorithm. This AWT methodology uses a spectrally adapted lifting scheme to generate an infinite basis of wavelet filters from a single conventional wavelet, and then finds the optimal one. Such pretreatment combined with a multivariate calibration approach such as partial least squares can greatly enhance the utility of Raman spectroscopy for quantitative analysis. The present work demonstrates this methodology using two dispersive Raman spectral data sets, incorporating lactic acid and melamine in pure water and in milk solutions. The results indicate that AWT can separate spectral background and noise from signals of interest more efficiently than conventional DWT, thus improving the effectiveness of Raman spectroscopy for quantitative analysis and classification.     

Signal denoising and baseline correction by discrete wavelet transform for microchip capillary electrophoresis

Signal denoising and baseline correction using discrete wavelet transform (DWT) are described for microchip capillary electrophoresis (MCE). DWT was performed on an electropherogram describing a separation of nine tetramethylrohodamine-5-isothiocyanate labeled amino acids, following MCE with laser-induced fluorescence detection, using Daubechies 5 wavelet at a decomposition level of 6. The denoising efficiency was compared with, and proved to be superior to, other commonly used denoising techniques such as Fourier transform, Savitzky-Golay smoothing and moving average, in terms of noise removal and peak preservation by directly visual inspection. Novel strategies for baseline correction were proposed, with a special interest in baseline drift that frequently occurred in chromatographic and electrophoretic separations.     

HREELS signal processing via wavelets

In spectroscopy, the recorded spectra can often be modelled as the noisy convolution product of an instrumental function with the ‘true’ signal to be estimated. Such models have often been used for high‐resolution electron energy‐loss spectroscopy (HREELS). In this article, a new method is suggested to estimate the ‘true’ HREELS signal, i.e. the original electronic diffusion function with ‘true’ peak intensities. Our method relies upon the use of wavelets that, because they exhibit simultaneous time and frequency localization, are well‐suited for signal analysis. Firstly, a wavelet shrinkage algorithm is used to filter the noise. This is achieved by decomposing the noisy signal into an appropriate wavelet basis and then thresholding the wavelet coefficients that contain noise. This algorithm has a particular threshold related to frequency and time. Secondly, the broadening due to the instrumental response is eliminated through a deconvolution process. This step mainly rests on the existing relation between the Lipschitz regularity of the signal and the decay with scale of its wavelet coefficients and on least squares. The efficiency of this technique is highlighted by comparing the results obtained with those provided by other published methods. This work is the second in a series of three papers in this issue. The first one presents background knowledge on the wavelets required to understand the estimation methods. The third paper explores the application of wavelet filtering and deconvolution techniques to x‐ray photoelectron spectroscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

小波滤噪用于示波计时电位信号处理的研究

根据信号（Ｓ）和噪声（Ｎ）在小波变换下表现出的截然不同的性质,提出了一种新的滤噪方法,研究了噪音在不同细节的性质、滤噪阈值的确定及平滑与滤噪的特点。对不同Ｓ／Ｎ的示波计时电位信号进行了实验结果表明;小波滤噪在大大提高Ｓ／Ｎ的同时,信号强度基本不损失,优于传统的滤噪方法。     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

毛细管电脉在柱安培检测信号的小波滤噪研究

采用一种新的小波滤噪方法对毛细管电泳在柱安培检测信号进行了处理,研究了小波基的选择、噪音在不同细节中的特征以及噪音阈值的确定等,用此方法对酚类定量分析,结果信噪比、检测限和线性范围均有较大改善。     

小波变换用于示波信号中有用信息提取的研究

示波分析是近年来在我国发展起来的一个新的电化学分析研究领域［１～４］．它根据阴极射线示波器荧光屏上示波图及其变化进行分析测试,从原理上可以将其分为示波电位法和示波计时电位法;从测定方式上可以将其分为示波滴定和示波测定．关于示波电位法的一些理论问题（如...     

小波变换用于近红外光谱性质分析

以汽油研究法辛烷值分析为例,研究了小波变换在近红外光谱分析中的应用。对近红外光谱的小波特性、小波变换参数以及变量提取方法进行了详细研究。研究结果表明：光谱噪音、有用信息和背景分别分布在小波高、中和低频区域;母小波函数对性质分析结果影响很大;小波变换可以同时扣除光谱背景、去除噪音和压缩变量,具有运算速度快、分析精度高以及无需去噪后处理等优点,在近红外光谱分析中具有很好的应用前景。