基于金@二氧化锰纳米片超级纳米粒子从比色到单颗粒光谱检测谷胱甘肽（英文）

合成了由金纳米球和二氧化锰薄片组成的金@二氧化锰纳米片超级纳米粒子(AMNS-SPs),将其作为探针,利用比色和单颗粒光谱2种分析方法进行了谷胱甘肽的传感检测.该传感检测基于选择性刻蚀探针AMNS-SPs中的二氧化锰纳米片,使得该探针的局域表面等离子共振波长蓝移.实验结果表明,比色法和单颗粒光谱法检测谷胱甘肽的检出限分别为0. 018μmol/L和23. 2 fmol/L,且后者是目前检测谷胱甘肽灵敏度最高的传感方法之一.该传感方法的优异性能主要源于非常薄的二氧化锰纳米片.     

基于蛋白模板金纳米簇及羟基氧化钴纳米片的激活型荧光纳米探针用于免标记和灵敏检测生物硫醇

该文基于牛血清白蛋白模板金纳米簇（BSA@AuNCs）与羟基氧化钴（CoOOH）纳米片构建了一种激活型荧光纳米探针用于生物硫醇的检测。带负电的BSA@AuNCs能通过静电吸附作用组装到带正电的CoOOH纳米片表面,与此同时,BSA@AuNCs的荧光由于内滤效应（IFE）有效地被CoOOH纳米片猝灭,形成BSA@AuNCs－CoOOH纳米探针。当向纳米探针溶液加入生物硫醇（0.05～150 μmol/L）时,生物硫醇与纳米探针中的CoOOH纳米片发生氧化还原反应,CoOOH纳米片被降解生成Co2+,同时释放出BSA@AuNCs,BSA@AuNCs荧光信号恢复。结果表明,该纳米探针可以检测低浓度的生物硫醇,对生物硫醇（半胱氨酸、谷胱甘肽和高半胱氨酸）的检出限为30 nmol/L。相对于其他的氨基酸、金属离子及糖类化合物,该纳米探针对生物硫醇具有较高的选择性并成功应用于人血清样品中生物硫醇的检测。     

硫化金包覆金纳米棒局域等离子体共振的纳米生物传感器研究

纳米生物传感技术是近年来迅速发展起来的一种超微生物传感技术,具有高选择性、高灵敏度、快速、方便检测等优点.尤其基于金纳米颗粒的生物探针的研究备受关注.近年来,对基于棒状金纳米结构的生物探针合成及在生物传感及医学成像中的应用的研究是金纳米棒研究的重要方向.纳米金由于其制备简单、易于修饰、稳定性和生物相容性好等优点,被广泛应用于生物分子的识别和检测领域.     

基于金纳米颗粒的比色传感体系用于前列腺特异性膜抗原的检测

发展了一种基于金纳米颗粒的比色传感体系用于检测前列腺特异性膜抗原的新方法.实验中合成了带有正电荷的金纳米颗粒,并设计了一段带有负电荷的前列腺特异性膜抗原的底物肽段.该方法基于金纳米颗粒聚集状态不同导致颜色变化的性质以及酶与底物的特异性识别作用,达到前列腺特异性膜抗原的检测.带正电荷的金纳米颗粒与带负电的肽段产生静电相互作用,引起金纳米颗粒的聚集;当体系中加入前列腺特异性膜抗原后,由于前列腺特异性膜抗原与肽段的特异性识别作用,带负电的肽段水解为谷氨酸碎片分子,导致金纳米颗粒的分散,反应体系颜色变化快速、明显.该方法简单、灵敏,线性范围为2～10 nmol/L,检测限为0.5 nmol/L.此外,该方法可用于标准加入法测定尿液中的PSMA.     

基于金纳米通道膜检测脱氧核糖核酸的研究

采用化学沉积的方法在聚碳酸酯膜上沉积金纳米颗粒得到金纳米通道膜,并用探针DNA对金纳米通道进行修饰。基于目标DNA与探针DNA杂交后,金纳米通道膜(孔径为30 nm左右)交流阻抗信号的变化,发展了一种无需标记的DNA的检测方法。该方法获得的线性回归方程为ΔR(Ω)=21.05 0.21C(nmol/L),线性相关系数为0.9864;线性检测范围为35~450 nmol/L,检出限为20 nmol/L。这种金纳米通道膜在DNA或RNA的检测及分离方面具有较好的应用前景。     

催化发夹组装诱导的金纳米颗粒聚集比色检测卡那霉素

建立了基于催化发夹组装诱导的金纳米颗粒聚集检测卡那霉素的方法。利用卡那霉素与适配体的特异性结合释放出引发链,引发吸附于金纳米颗粒表面的催化发夹组装,形成大量双链结构,导致金纳米颗粒在高盐浓度条件下发生聚集。通过凝胶电泳和透射电镜对催化发夹组装和金纳米颗粒的聚集进行了表征并对实验条件进行了优化。结果表明,37℃条件下,发夹探针浓度为160 nmol/L,NaCl浓度为20 mmol/L时,方法的线性检测范围为4.0～160 nmol/L,检测限为1.6 nmol/L。将该方法用于牛奶样品中卡那霉素的加标回收实验,回收率为97.5%～109.0%,相对标准偏差在1.9%～3.0%之间。     

基于金胶的选择性聚集实现p53基因的电化学超灵敏检测

介绍了一种利用金胶的选择性聚集实现信号扩增的超灵敏的电化学方法, 用于人类p53肿瘤抑制剂基因的检测. 在实验中, 根据p53基因的序列设计了能特异性检测p53肿瘤抑制剂基因的二段探针, 在一段探针上固定磁性颗粒以捕获并富集目标基因, 同时在另一段探针上标记金纳米颗粒作为检测信标. 另外, 通过硫代三聚氰酸和金纳米颗粒的自组装作用, 形成金纳米颗粒和硫代三聚氰酸的网状结构, 获得金纳米颗粒的选择性聚集, 实现信号扩增. 用此法检测目标p53野生型DNA, 最低检测限为2.24×10-17 mol/L, 同时进一步研究了该探针对p53野生型和一碱基错配的突变型的选择性.     

高灵敏纳米金比色芯片检测乙型肝炎病毒DNA及其变异

构建了新型纳米金比色芯片,利用Taq DNA连接酶的连接特异性,将其与乙型肝炎病毒DNA( HBV-DNA)靶序列完全互补杂交的捕获探针(固定在芯片上)和纳米金修饰的探针连接成一条链,从而将纳米金颗粒固定到芯片点阵上,再通过银染反应放大,形成裸眼可见的显色信息.通过点阵的位置及灰度,即可判断HBV-DNA靶序列的单碱基突变,并得出相对定量信息.本实验对不同浓度的HBV-DNA靶序列进行了检测.结果显示:此技术对单碱基突变有很强的特异性识别能力,并且具有较高的灵敏度(约10 pmol/L),在10～100 pmol/L浓度范围内表现出较好的线性关系.该技术检测时间短(＜1 h)、操作简单、不需要特殊的检测设备,具有很好的临床应用前景.     

检测谷胱甘肽的荧光探针

谷胱甘肽作为细胞中最丰富的非蛋白巯基化合物,对维持人体正常生理活动有着重要作用。因此,能够高效灵敏检测谷胱甘肽意义重大。荧光探针法具有操作方便、特异性优良和灵敏度高等优点,成为目前检测生物样品中谷胱甘肽的主要手段。荧光探针法的成功应用还得益于谷胱甘肽的特殊结构特征,如巯基的亲核性、还原性、对金属离子高亲合力以及氨基的协同反应能力。本文针对近五年来特异性检测谷胱甘肽的荧光探针进行总结,将其分为有机荧光探针和无机荧光探针两大类,并结合香豆素、BODIPY、罗丹明、花菁、苯并噻唑、萘酰亚胺、金属有机骨架、半导体量子点、碳点、金属纳米颗粒、二氧化锰纳米片、石墨烯量子点等有机/无机荧光探针的结构特征,综述了迈克尔加成反应、亲核取代、还原反应以及硫醇诱导的2,4-二硝基苯磺酰基的断裂反应与络合反应等传感机理。同时,对探针的设计策略、谷胱甘肽的响应模式及其在实际中的应用进行了阐述和分析,以期为新型谷胱甘肽荧光探针的构建提供新的思路。     

金纳米颗粒表面能量转移及巯基化合物的检测

二氧化硅稳定的金纳米颗粒(Au-SiO₂)与罗丹明B之间发生表面能量转移,使罗丹明B荧光猝灭。 金纳米颗粒对罗丹明B的Stern-Volmer猝灭常数为4.3×10³ L/mol。 当荧光猝灭的混合体系中加入巯基化合物时,巯基化合物与金纳米颗粒发生强相互作用阻断罗丹明B-金纳米颗粒之间的能量转移,罗丹明B荧光恢复。 基于罗丹明B-Au-SiO₂体系对巯基化合物的单一响应,建立了一种简单快速检测巯基化合物的方法;并且由于二氧化硅对金纳米颗粒的稳定作用,金纳米颗粒成为一种可以回收利用的检测探针。     

Ultrathin FeS nanosheets with high chemodynamic activity for sensitive colorimetric detection of H2O2 and glutathione

Iron chalcogenides have attracted great interest as potential substitutes of nature enzymes in the colorimetric biological sensing due to their unique chemodynamic characteristics.Herein,we report the preparation of ultrathin Fe S nanosheets （NSs） by a simple one-pot hydrothermal method and the prepared Fe S NSs exhibit strong Fenton-reaction activity to catalyze hydrogen peroxide （H₂O₂） for generation of hydroxyl radical （^·OH）.Based on the chromogenic reaction o...     

Fe2O3-decorated boron/nitrogen-co-doped carbon nanosheets as an electrochemical sensing platform for ultrasensitive determination of paraquat in natural water

Boron/nitrogen-co-doped carbon (BCN) nanosheets decorated with Fe₂O₃ nanocrystals (Fe₂O₃–BCN) were cast on a glassy carbon electrode (GCE) and applied as an electrochemical sensor to effectively detect paraquat (PQ), a toxic herbicide, in aqueous environments. A linear experiment performed using square wave voltammetry (SWV) under optimized experimental conditions produced a decent linear relationship and a low detection limit (LOD) of 2.74 nmol/L (S/N = 3). Repeatability, reproducibility, stability, and interference experiments confirmed that the Fe₂O₃–BCN/GCE system exhibited decent electrochemical sensing performance for PQ molecules. Notably, the designed sensor showed high selectivity and a decent linear relationship with PQ concentration in natural water samples. To the best of our knowledge, this is the first study on the preparation of Fe₂O₃–BCN nanosheets for PQ detection. The proposed sensor can be employed as an effective alternative tool for distinguishing and processing PQ.     

Reversible phase transformation of MnO2 nanosheets in an electrochemical capacitor investigated by in situ Raman spectroscopy

The reversible phase transformation is reported from hexagonal to monoclinic structure responding to the intercalation/deintercalation of Na(+) between MnO(2) nanosheets upon potential cycling in aqueous electrolyte via an in situ Raman technique. This structural evolution will influence the Na(+) diffusion process in MnO(2) nanosheets and cause phase retention during the self-discharge process.     

Preparation and electrochemical properties of MnO2 nanosheets attached to Au nanoparticles on carbon nanotubes

A wet chemical route for the preparation of MnO(2) nanosheet/Au nanoparticle/MWNT hybrid materials is developed. The Au nanoparticles are prepared by reducing AuCl(4)(-) with citrate and attached to thiol-modified MWNTs. Owing to the reducing property and the binding ability to Mn-containing species of capping agents surrounded the Au nanoparticles, the MnO(2) nanosheets are formed on the surface of Au nanoparticles. The ternary nanocomposites of MnO(2)/Au/MWNT have been characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The affiliation of MnO(2) nanosheets into the hybrids remarkably enhances the electrocatalytic performance of Au nanoparticle/MWNT towards the oxygen reduction reaction. The specific capacitance of the ternary hybrids is also increased dramatically comparing with that of Au/MWNT.     

Preparation of Reduced Graphene Oxide/MnO Composite and Its Electromagnetic Wave Absorption Performance

The composite containing reduced graphene oxide and MnO nanoparticles (RGO/MnO) has been prepared via a one step pyrolysis method. The MnO nanoparticles were uniformly dispersed on the surface of RGO nanosheets forming MnO/RGO composite. The composite displays a maximum absorption of ‒38.9 dB at 13.5 GHz and the bandwidth of reflection loss corresponding to –10 dB can reach 4.9 GHz (from 11.5 to 16.4 GHz) with a coating layer thickness of only 2 mm. Therefore, the obtained RGO/MnO composite a perfect lightweight and high-performance electromagnetic wave absorbent.

     

Intracellular glutathione detection using MnO(2)-nanosheet-modified upconversion nanoparticles

We report a novel design, based on a combination of lanthanide-doped upconversion nanoparticles and manganese dioxide nanosheets, for rapid, selective detection of glutathione in aqueous solutions and living cells. In this approach, manganese dioxide (MnO(2)) nanosheets formed on the surface of nanoparticles serve as an efficient quencher for upconverted luminescence. The luminescence can be turned on by introducing glutathione that reduces MnO(2) into Mn(2+). The ability to monitor the glutathione concentration intracellularly may enable rational design of a convenient platform for targeted drug and gene delivery.     

Cauliflower‐like Platinum Particles Decorated Reduced Graphene Oxide for Sensitive Determination of Acetaminophen

Over the past years, the development of electrochemical sensing platforms for the sensitive detection of drug molecules have received great interests. In this research study, we introduced cauliflower‐like platinum particles decorated reduced graphene oxide modified glassy carbon electrode (Pt?RGO/GCE) as an electrochemical sensing platform for highly sensitive determination of acetaminophen (ACTM). The sensor was prepared via a simple and environmentally friendly two‐step electrodeposition method at room temperature. The combination of conductive RGO nanosheets and unique structured Pt particles (average 232 nm in diameter) provided an efficient interface with large effective surface area which greatly facilitated the electron transfer of ACTM. The experimental conditions that might affect the drug detection were studied in detail and optimized for best performance. The Pt?RGO/GCE was able to detect ACTM up to the limit of 2.2 nM with a linear concentration range from 0.01 to 350 μM. With its high reproducibility, excellent stability and selectivity, the as‐fabricated sensor was successfully applied to the ACTM content measurement in commercial tablets.     

Hydrothermal and plasma nitrided electrospun carbon nanofibers for amperometric sensing of hydrogen peroxide

Microchimica Acta - A fluorometric method is presented for sensitive deternination of microRNA. It is making use of carbon dots (C-dots) loaded with a DNA probe as fluorophore and MnO2 nanosheets...     

Encapsulation of superparamagnetic Fe3O4@SiO2 core/shell nanoparticles in MnO2 microflowers with high surface areas

Microflowers made of interconnected MnO₂ nanosheets have been successfully synthesized in a microwave reactor through a hydrothermal reduction of KMnO₄ with aqueous HCI at elevated temperatures in the presence of superparamagnetic Fe₃O₄SiO₂ core-shell nanoparticles.Due to the chemical compatibility between SiO₂ and MnO₂,the heterogeneous reaction leads to the spontaneous encapsulation of the Fe₃O₄@SiO₂ core-shell nanoparticles in the MnO₂ microflowers.The resulting hybrid particles exhibit multiple properties including high surface area associated with the MnO₂nanosheets and superparamagnetism originated from the Fe₃O₄@SiO₂ core-shell nanoparticles.which are beneficial for applications requiring both high surface area and magnetic separation.     

Photocurrent generation from semiconducting manganese oxide nanosheets in response to visible light

Unilamellar nanosheet crystallites of manganese oxide generated the anodic photocurrent under visible light irradiation (lambda < 500 nm), while the nanosheets themselves were stable as revealed by in-plane XRD and UV-visible absorption spectra. The band gap energy was estimated to be 2.23 eV on the basis of the photocurrent action spectrum. The molecular thickness of approximately 0.5 nm may facilitate the charge separation of excited electrons and holes, which is generally very difficult for strongly localized d-d transitions. The monolayer film of MnO2 nanosheets exhibited the incident photon-to-electron conversion efficiency of 0.16% in response to the monochromatic light irradiation (lambda = 400 nm), which is comparable to those for sensitization of monolayer dyes adsorbed on a flat single-crystal surface. The efficiency declined with increasing the layer number of MnO2 nanosheets, although the optical absorption was enhanced. The recombination of the excited electron-hole pairs may become dominant when the carriers need to migrate a longer distance than 1 layer through multilayered nanosheets.