Evaluation of a magnetic polysulfone microcapsule containing organic modified montmorillonite as a novel solid-phase extraction sorbent with chlorophenols as model compounds

A porous polysulfone microcapsule containing organic modified montmorillonite and magnetic nanoparticles (OMMT-Fe₃O₄@PSF) has been successfully prepared by a phase-inversion method and evaluated as a magnetic solid-phase extraction (MSPE) sorbent for clean-up and enrichment of 4-chlorophenol (4-CP) and 2-chlorophenol (2-CP) in aqueous samples. Compared with a microcapsule containing the conventional extraction sorbent C18 (C18-Fe₃O₄@PSF), OMMT-Fe₃O₄@PSF had much lower cost, a faster adsorption rate, and superior uptake amounts for the investigated analytes. The proposed microcapsule has been developed for the extraction of 4-CP and 2-CP from environmental water samples and their analysis by high-performance liquid chromatography with UV detection (HPLC-UV). Various parameters, such as pH, extraction time, the mass of sorbent, and the desorption conditions, have been evaluated and the calibration curves of the chlorophenols were linear (R² ≥ 0.9985) in the range from 1.01 to 104.5 ng mL⁻¹. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 0.22 and 0.17 ng mL⁻¹ and the limits of quantification calculated at S/N = 10 were 1.52 and 1.07 ng mL⁻¹ for 2-CP and 4-CP, respectively. The recoveries of 2-CP and 4-CP from natural water and the treated wastewater samples were in the range of 84.4-115% with relative standard deviations (RSDs) lower than 7.0%. The results have demonstrated the suitability of the MSPE approach for the analysis of trace chlorophenols in aqueous samples.     

Rapid magnetic solid-phase extraction based on magnetite/silica/poly(methacrylic acid–co–ethylene glycol dimethacrylate) composite microspheres for the determination of sulfonamide in milk samples

A novel magnetic solid-phase extraction (MSPE) sorbent, magnetite/silica/poly (methacrylic acid–co-ethylene glycol dimethacrylate) (Fe₃O₄/SiO₂/P(MAA-co-EGDMA)), was developed. This MSPE material was prepared by distillation–precipitation polymerization of MAA and EGDMA in the presence of Fe₃O₄/SiO₂ microspheres with the surface containing abundant reactive double bonds. The resultant sorbent material was characterized by elemental analysis, electron microscopy, X-ray diffraction and Fourier-transformed infrared spectroscopy. In this work, eleven sulfonamides (SAs) were selected as model analytes to validate the extraction performance of this new MSPE sorbent. Noticeably, the extraction can be carried out quickly, the extraction time for the SAs onto Fe₃O₄/SiO₂/P(MAA-co-EGDMA) sorbent can be clearly shortened to 0.5 min. The desorption solution of SAs was analyzed by LC–MS/MS, and the results showed that the recoveries of these compounds were in the range of 87.6–115.6%, with relative standard deviations ranging between 0.9% and 10.8%; the limit of detection were in the range of 0.5–49.5 ng/L.     

Magnetic solid-phase extraction of triclosan using core-shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@MIL-100 magnetic nanoparticles,and its determination by HPLC with UV detection

The article describes the synthesis of core-shell magnetic nanoparticles (MNPs) of the type Fe₃O₄@MIL-100 (MIL standing for Material Institut Lavoisier), and their application as sorbent for magnetic solid-phase extraction (MSPE) of triclosan. The MNPs were prepared via circular self-assembly of ferric chloride and benzenetricarboxylic acid. The functionalized MNPs were characterized by transmission electron microscopy, FTIR and thermogravimetry. Following extraction, triclosan was eluted with ammoniacal methanol and then submitted to HPLC with UV detection. The amount of magnetic microspheres, sample pH and ionic strength, adsorption time, desorption time, desorption solvent and the volume of the eluent were optimized. Under optimum conditions, the method showed good linearity in the 0.1 to 50 mg·kg^?1 triclosan concentration range in toothpaste samples. Other features include (a) intra-day and inter-day relative standard deviations (RSD, for n = 4) of <5.5 %, (b) a 30 μg·kg^?1 limit of detection, and (c) extraction recoveries between 90.86 % and 101.1 %. The method was successfully applied to the determination of triclosan in children’s toothpaste.

Open image in new window

Graphical abstract The article describes the synthesis of core-shell magnetic nanoparticles (MNPs) of the type Fe₃O₄@MIL-100, and their application as sorbent for magnetic solid-phase extraction (MSPE) of triclosan.

     

Magnetic solid-phase extraction of malachite green using soluble eggshell membrane protein doped with magnetic graphene oxide nanocomposite

ABSTRACT

This study describes a new magnetic solid-phase extraction (MSPE) technique based on Fe₃O₄/graphene oxide-soluble eggshell membrane protein (Fe₃O₄/GO-SEP) for accurate measurement of malachite green (MG) residue in various water samples residues by UV-Vis spectroscopy. The morphology of the prepared adsorbent has been studied by scanning electron microscopy and atomic force microscopy in details. Parameters affecting the MSPE were optimised and determined with UV-Vis spectrophotometry thoroughly. Under the optimised extraction circumstances, the introduced method represented a wide linearity over the concentration of 0.5–250 ng mL^?1, a high enrichment factor of 83.3 and low detection limit of 0.2 ng mL^?1. The prepared Fe₃O₄/GO-SEP was successfully used for preconcentration and determination of MG in river and fish farming water samples with suitable precision and accuracy.     

Stripping voltammetric analysis of organophosphate pesticides based on solid-phase extraction at zirconia nanoparticles modified electrode

A sensitive electrochemical stripping voltammetric method for analyzing organophosphate (OP) compounds was developed based on solid-phase extraction (SPE) at zirconia (ZrO₂) nanoparticles modified electrode. ZrO₂ nanoparticles were proved as a new sorbent for SPE of OP pesticides. Because of the strong affinity of ZrO₂ for the phosphoric group, nitroaromatic OPs can strongly bind to the ZrO₂ nanoparticle surface. The combination of SPE with square-wave voltammetry (SWV) provided a fast, sensitive, and selective electrochemical method for nitroaromatic OP compounds using methyl parathion (MP) as a model. The stripping response was highly linear over the MP range of 0.003–2.0 μg/mL, with a detection limit of 0.001 μg/mL. The fast extraction ability of ZrO₂ nanoparticles makes it promising sorbent for various solid-phase extractions.     

Magnetic solid-phase extraction based on Fe3O4/graphene oxide nanoparticles for the determination of malachite green and crystal violet in environmental water samples by HPLC

This work describes a magnetic Fe₃O₄/graphene oxide (GO)-based solid-phase extraction (MSPE) technique for high performance liquid chromatography (HPLC) detection of malachite green (MG) and crystal violet (CV) in environmental water samples. Fe₃O₄/ GO magnetic nanoparticles were synthesised by a chemical co-precipitation method and characterised by scanning electron micrograph, transmission electron microscope, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and surface area analyser. The prepared Fe₃O₄/GO magnetic nanoparticles were used as the adsorbents of MSPE for MG and CV. By coupling with HPLC, a sensitive and cost-effective method for simultaneous determination of MG and CV was developed. The important parameters including the amount of Fe₃O₄/GO, pH of the sample solution, extraction time, salt effect, the type and volume of desorption solvent were investigated in detail. Under optimised conditions, the calibration curves were linear in the concentration range of 0.5–200 μg L^?1, and the limits of detection were 0.091 and 0.12 μg L^?1 for MG and CV, respectively. Finally, the established MSPE-HPLC method was successfully applied to determine MG and CV in environmental water samples with the recoveries ranging from 91.5% to116.7%.     

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.     

Chitosan-poly(m-phenylenediamine)@Fe3O4 nanocomposite for magnetic solid-phase extraction of polychlorinated biphenyls from water samples

A extraction medium based on chitosan-poly(m-phenylenediamine) (CS-PPD) @Fe₃O₄ nanocomposite was synthesized by chemical polymerization of m-phenylenediamine in the presence of chitosan coated magnetic nanocomposite, and for the first time, used as the sorbent for the magnetic solid-phase extraction (MSPE) of seven polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153, and PCB180) at trace levels in water samples. Gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS) was used for PCBs quantification and detection. Several factors related to MSPE efficiencies, such as type and amount of sorbent, extraction time, sample pH, and desorption conditions were investigated. Under the optimized conditions, an excellent linearity was observed in the range of 1.0–200 ng L^–1 for PCB180, 0.5–200 ng L^–1 for the other six PCBs with the correlation coefficients ranging from 0.9954 to 0.9993. The good recoveries at spiked levels of 10.0, 20.0, and 50.0 ng L^–1 were obtained in the range of 94 %–108 %, and the coefficients of variations were less than 6 %. The proposed method was feasible, rapid, and easy to operate for the trace analysis of the PCBs in local aquaculture water, livestock breeding water, and sewage water samples. Graphical Abstract

Fig. 1 Schematic diagram for the preparation of chitosan–poly(m-phenylenediamine) @Fe₃O₄ nanocomposite.     

Determination of diuretics in human urine using HPLC coupled with magnetic solid-phase extraction based on a metal–organic framework

Magnetic solid-phase extraction (MSPE) employing a metal–organic framework (Fe₃O₄@UiO-66-OH) combined with high-performance liquid chromatography was developed for the determination of trace diuretics in urine. The structure and properties of Fe₃O₄@UiO-66-OH were investigated using X-ray diffraction, infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometry. Magnetic solid-phase extraction conditions, such as adsorbent amount and solution pH, were optimized using response surface methodology. Under the optimal conditions, the method resulted in excellent linearity with a high correlation coefficient (r > 0.99), satisfactory intraday repeatability (1.78–2.99%), low limits of detection (0.08–0.23 ng/ml), and good recoveries in urine samples (between 93.5 and 103%). Fe₃O₄@UiO-66-OH based on MSPE is a novel pretreatment technique for the detection of trace diuretics in urine.     

Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy–MWCNT nanocomposite and its application for extraction of ultra-trace amounts of PAHs from various samples

In the present study, multi-walled carbon nanotube oxide was immobilized on the pyrrole magnetic nanoparticles. Application of the synthesized material was investigated for the magnetic solid-phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs), from the environmental samples. Determinations of the analytes were performed with gas chromatography–mass spectrometry. The structure and morphology of Fe₃O₄@PPy–MWCNT were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermal gravimetric analysis, and vibrating sample magnetometer. Performance of MSPE is mainly affected by extraction time, sorbent amount, sample solution volume, and eluent type and volume. In this study, the best possible performance of MSPE has been achieved using a combination of central composite design and Bayesian regularized artificial neural network technique. Under the optimum extraction conditions, linear range between 0.5 and 250 µg L^?1 (R ² > 0.994), preconcentration factors from 232 to 403 and limits of detection ranging from 0.1 to 0.3 µg L^?1 were obtained. Relative standard deviations for intra-day and inter-day precision were 3.3–5.1% and 3.7–5.6%, respectively. In addition, feasibility of the method was demonstrated by extraction and determination of PAHs from some real samples containing tap water, hookah water as well as soil samples, and relative recovery in the range of 85.4–106.8% was obtained. This MSPE method provides several advantages, such as high extraction efficiency, minimum sorbent for extraction of the analytes from high sample volumes, convenient extraction procedure, and short analysis times.     

A nanocomposite consisting of graphene oxide and Fe3O4 magnetic nanoparticles for the extraction of flavonoids from tea,wine and urine samples

We describe a single-step solvothermal method for the preparation of nanocomposites consisting of graphene oxide and Fe₃O₄ nanoparticles (GO/Fe₃O₄). This material is shown to be useful as a magnetic sorbent for the extraction of flavonoids from green tea, red wine, and urine samples. The nanocomposite is taking advantage of the high surface area of GO and the magnetic phase separation feature of the magnetic sorbent. The nanocomposite is recyclable and was applied to the extraction of flavonoids prior to their determination by HPLC. The effects of amount of surfactant, pH value of the sample solution, extraction time, and desorption condition on the extraction efficiency, and the regeneration conditions were optimized. The limits of detection for luteolin, quercetin and kaempferol range from 0.2 to 0.5 ng∙ mL⁻¹ in urine, from 3.0 to 6.0 ng∙mL⁻¹ in green tea, and from 1.0 to 2.5 ng∙mL⁻¹ in red wine. The recoveries are between 82.0 and 101.4 %, with relative standard deviations of <9.3 %.

The article describes a method for magnetic solid-phase extraction (MSPE) of trace amounts of natural substances in complex samples by using graphene oxide (GO)-Fe₃O₄nanoparticles as the sorbent.

     

Magnetic solid-phase extraction to preconcentrate trace amounts of gold (III) using nickel ferrite magnetic nanoparticles

In this research, nickel ferrite (NiFe₂O₄) magnetic nanoparticles were synthesised by a simple method and applied as sorbent for magnetic solid-phase extraction of trace amounts of Au(III) from water samples. Detection in this technique was performed by flame atomic absorption spectrometry. The effects of sample pH, amount of sorbent, extraction time, desorption solvent and its volume on the extraction process were optimised. The effects of interfering ions on the recovery of the analyte were also evaluated in model solutions. The best results were obtained at pH 6.5 with 5 mL of eluent solution (0.1 mol L^?1 sodium thiosulphate) and an extraction time of 30 min. Under optimal conditions, the sorption capacity was 34.6 mg g^?1. Also, enhancement factor (for 100 mL of sample solution) was found to be 19.3. The calibration graph was linear in the range of 4.4–800.0 µg L^?1 gold concentration and the limit of detection was 1.32 µg L^?1. The relative standard deviation of the method (for n = 8) was 1.57%. The method was successfully applied to the extraction of Au(III) from water samples.     

Magnetic solid-phase extraction based on magnetic carbon nanotube for the determination of estrogens in milk

In this work, a novel method for the fabrication of magnetic carbon nanotubes based on 'aggregation wrap' was proposed. When carbon nanotubes and magnetic nanoparticles were vortically mixed in a solvent, the magnetic nanoparticles were wrapped into the carbon nanotube bundles that formed during the aggregation process, leading to the formation of magnetic carbon nanotubes. Thus, the resultant material can be separated from the solvent rapidly and conveniently by a magnet. Our investigation demonstrated that the 'aggregation wrap' mechanism for the preparation of magnetic composite is also applicable to other self-aggregated micro/nanomaterials, including graphene, graphite, C(60), etc. To testify the feasibility of the magnetic composites in sample preparation, the resultant magnetic carbon nanotubes were applied as sorbents for magnetic solid-phase extraction (MSPE) of estrogens in milk samples. Under optimized conditions, a rapid, convenient and efficient method for the determination of estrogens in milk samples was established by the combination of MSPE with high-performance liquid chromatography with fluorescence detector. The linearity range of the proposed method was 5-2000 μg/L with correlation coefficients (R) of 0.9983-0.9994. The limit of detection (LOD) for three estrogens ranged from 1.21 to 2.35 μg/L. The intra- and inter-day relative standard deviations (RSDs) were <9.3%. The reproducibility of the MSPE with different batches of magnetic carbon nanotubes was acceptable with RSD values <3.6%.     

磁性聚电解质多层膜固相萃取-火焰原子吸收光谱法测定水样中的三价铬

将聚电解质多层膜组装于磁性硅胶表面得到新型吸附剂;将该新型吸附剂用于磁性固相萃取(MSPE),并与火焰原子吸收光谱检测联用分析水样中的Cr3+;优化了样品的pH、洗脱条件和超声时间等影响MSPE萃取效率的参数.结果表明,在优化的测试条件下,该方法的检出限(3σ)为1.7μg·L-1,相对标准偏差为2.1%,富集倍数为15.9,可用于测定合成水样中的Cr3+.     

A magnetic knitting aromatic polymer as a new sorbent for use in solid-phase extraction of organics

Magnetic knitting aromatic polymers (Fe₃O₄/KAPs) are introduced here as a new kind of sorbents. KAPs are hyper-cross-linked-polymers that were prepared via a Friedl-Crafts reaction from triphenylphosphine and benzene as building blocks. The Fe₃O₄/KAP composite was obtained by coprecipitation of KAP with magnetite nanoparticles. The resulting Fe₃O₄/KAP is shown to be a viable magnetic sorbent for various organic materials such as the phenylurea herbicides (PUHs), including metoxuron, monuron, chlortoluron, monolinuron and buturon, and also for various phthalates, polycyclic aromatic hydrocarbons and chlorophenols. The Fe₃O₄/KAP was characterized by means of Brunauer-Emmett-Teller surface area measurements, Fourier-transform infrared spectroscopy, thermogravimetry, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Following desorption with acetonitrile, the analytes were quantified by using HPLC with UV detection. The effects of adsorbent dosage, extraction time, sample pH, ionic strength, desorption solvent and desorption time were optimized for the PUHs. Under optimal conditions, response is linear from 0.5–1.0 up to 50 ng·mL^?1 for the five PUHs. Lower limits of detection range between 0.05 and 0.30 ng·mL^?1. Other figures of merit include (a) high enrichment factors (60–297), (b) good recoveries (91.8–106.5%), and (c) relative standard deviations of <8.4%. The method was successfully applied to analysis of the PUHs in real samples (bottled mixed juice, milk and soymilk). The results indicate that such Fe₃O₄/KAPs have a wide application scope as an adsorbent for use in magnetic solid phase extraction.

Open image in new window

Graphical abstract A magnetic knitting aromatic polymer based nanocomposite (Fe₃O₄/KAP) was prepared by a one-pot method and explored as an absorbent for magnetic solid-phase extraction (MSPE) of phenylurea herbicides (PUHs) from bottled mixed juice, milk and soymilk samples before quantitation by HPLC with UV detection.

     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

Recent applications of atomic spectroscopy coupled with magnetic solid-phase extraction techniques for heavy metal determination in environmental samples: A review

Atomic spectroscopy is the most popular approach to determine the presence of heavy metals in the environment. Heavy metals are potentially toxic and have various negative effects on many living organisms, including humans. With the rapid increase in the variety of industries and human activities, large amounts of heavy metals are released into the atmosphere, water, and soil. Heavy metal analysis of environmental samples is very important for determining the exposure limits. Environmental samples are highly complex matrices, and various sample preparation techniques have been developed for the extraction of heavy metals from them, including magnetic solid-phase extraction (MSPE). The use of MSPE in heavy metal analysis has recently gained significant attention owing to a number of advantages. MSPE technique overcomes main issues such as phase separation, handling, and column packing. The use of magnetic adsorbents in sample preparation has grown over the past few years, making MSPE a promising technique for sample preparation. The objective of this review article is to provide the latest applications of MSPE coupled with atomic spectroscopy for heavy metal determination in environmental samples. In addition, new magnetic adsorbents and their analytical merits are emphasized.     

A highly sensitive method for detection of bisphenol A in water samples based on functionalised Fe3O4@SiO2@nylon66

A simple and sensitive method was developed for preconcentration and determination of bisphenol A (BPA) in environmental samples by high performance liquid chromatography (HPLC). The hydrophilic silicon-dioxide- and nylon66-functionalised magnetic material (Fe₃O₄@SiO₂@nylon66) was used as a sorbent for magnetic solid-phase extraction (MSPE). With the anhydrous microemulsion reaction, the Fe₃O₄@SiO₂@nylon66 had shown great characteristics such as good magnetic responsivity, water dispersibility and stability. Based on the materials, various extraction parameters including pH, extraction time, elution time, the number of sorbents, sample volume and elution times were optimised. The whole extraction procedure could be accomplished within 20 min and the materials could be used more than 10 times after regeneration. Under the optimised conditions, different types of water samples (Tap water, river water, sea water and underground water) were successfully analysed to verify the applicability of the proposed method. The recoveries of different samples ranged from 88.54% to 104.46%. An enrichment factor of 250 was achieved with 0.05 μg/L detection limit. Thus, the developed MSPE is a potential technique that can be used for water samples preconcentration or combined with other analytical methods for determination of BPA.     

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

Determination of eight illegal drugs in human urine by combination of magnetic solid‐phase extraction with capillary zone electrophoresis

Using magnetite/silica/poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) (Fe₃O₄/SiO₂/poly(MAA‐co‐EDMA)) magnetic microspheres, a rapid and high‐throughput magnetic solid‐phase extraction coupled with capillary zone electrophoresis (MSPE‐CZE) method was developed for the determination of illegal drugs (ketamine, amphetamines, opiates, and metabolites). The MSPE of target analytes could be completed within 2 min, and the eight target analytes could be baseline separated within 15 min by CZE with 30 mM phosphate buffer solution (PBS, pH 2.0) containing 15% v/v ACN as background electrolyte. Furthermore, hydrodynamic injection with field‐amplified sample stacking (FASS) was employed to enhance the sensitivity of this MSPE‐CZE method. Under such optimal conditions, the limits of detection for the eight target analytes ranged from 0.015 to 0.105 μg/mL. The application feasibility of MSPE‐CZE in illegal drugs monitoring was demonstrated by analyzing urine samples, and the recoveries of target drugs for the spiked sample ranging from 85.4 to 110.1%. The method reproducibility was tested by evaluating the intra‐ and interday precisions, and relative standard deviations of <10.3 and 12.4%, respectively, were obtained. To increase throughput of the analysis, a home‐made MSPE array that has potential application to the treatment of 96 samples simultaneously was used.