Na6B13O22.5, a new noncentrosymmetric sodium borate

Na₆B₁₃O_22.5 (B/Na=2.17) single crystals were obtained by heating, melting and appropriately cooling borax, Na₂[B₄O₅(OH)₄]·8H₂O. Its formula has been determined by the resolution of the structure from single-crystal X-ray diffraction data. The compound crystallizes in the noncentrosymmetric orthorhombic Iba2 space group, with the following unit cell parameters: a=33.359(11) Å, b=9.554(3) Å, c=10.644(4) Å; V=3392.4(19) Å³; Z=8. The crystal structure was solved from 3226 reflections until R₁=0.0385. It exhibits a three-dimensional framework built up from BO₃ triangles (Δ) and BO₄ tetrahedra (T). Two kinds of borate groups can be considered forming two different double B₃O₃ rings: two B₄O₉ (linkage by two boron atoms) and one B₅O₁₁ (linkage by one boron atom); the shorthand notation of the new fundamental building block (FBB) existing in this compound is: 13: ∞³ [(5: 3Δ+2T)+2(4: 2Δ+2T)]. The discovery of this new borate questions the real number of Na₂B₄O₇ varieties. The existence of Na₆B₁₃O_22.5 (B/Na=2.17) and of another recently discovered borate, Na₃B₇O₁₂ (B/Na=2.33; FBB 7: ∞³ [(3: 2Δ+T)+(3: Δ+2T)+(1: Δ)], with a composition close to the long-known borate α-Na₂B₄O₇ (B/Na=2; FBB 8: ∞³ [(5: 3Δ+2T)+(3: 2Δ+T)], may explain the very complex equilibria reported in the Na₂O-B₂O₃ phase diagram, especially in this range of composition.     

Thermodynamic representation of the NaCl + Na2SO4 + H2O system with electrolyte NRTL model

A comprehensive thermodynamic model based on the electrolyte NRTL (eNRTL) activity coefficient equation is developed for the NaCl + H₂O binary, the Na₂SO₄ + H₂O binary and the NaCl + Na₂SO₄ + H₂O ternary. The NRTL binary parameters for pairs H₂O-(Na⁺, Cl⁻) and H₂O-(Na⁺, SO₄²⁻), and the aqueous phase infinite dilution heat capacity parameters for ions Cl⁻ and SO₄²⁻ are regressed from fitting experimental data on mean ionic activity coefficient, heat capacity, liquid enthalpy and dissolution enthalpy for the NaCl + H₂O binary and the Na₂SO₄ + H₂O binary with electrolyte concentrations up to saturation and temperature up to 473.15 K. The Gibbs energy of formation, enthalpy of formation and heat capacity parameters for solids NaCl_(s), NaCl·2H₂O_(s), Na₂SO_4(s) and Na₂SO₄·10H₂O_(s) are obtained by fitting experimental data on solubilities of NaCl and Na₂SO₄ in water. The NRTL binary parameters for the (Na⁺, Cl⁻)-(Na⁺, SO₄²⁻) pair are regressed from fitting experimental data on dissolution enthalpies and solubilities for the NaCl + Na₂SO₄ + H₂O ternary.     

Stabilization of over-stoichiometric Mn in layered Na2/3MnO2

Sodium manganates with nominal composition Na_2/3MnO₂ were prepared by solid state reaction between Na₂CO₃ and MnCO₃ at 1000 °C. The composition and structure of Na_xMnO₂ were controlled by the rate of cooling from the temperature of preparation. This is a consequence of the capability of Na_2/3MnO₂ to accommodate over‐stoichiometric Mn⁴⁺ ions up to 12.5%. Structural characterization was carried out by XRD powder diffractions, TEM analysis and Raman spectroscopy. The composition and oxidation state of manganese were determined by chemical analysis and magnetic susceptibility measurements. The manganese distribution in the layers was analysed using electron paramagnetic resonance (EPR) spectroscopy. By quenching from 1000 °C, the orthorhombic distorted modification is stabilized. A phase separation into orthorhombic and hexagonal modifications takes place when Na_2/3MnO₂ is slow cooled. The structure changes are concomitant with an increase in the oxidation state of Mn. The over‐stoichiometric Mn⁴⁺ ions are accommodated in the hexagonal modification by creation of vacancies in the MnO₂‐layers.     

Synthesis and characterization of Na11[CuO4][SO4]3

Na₁₁[CuO₄][SO₄]₃ was obtained from a redox reaction of CuO with Na₂O₂ in the presence of Na₂O and Na₂SO₄ in sealed Ag containers under Ar atmosphere at 600°C. The crystal structure has been determined from X-ray single crystal data at 293 and 170 K (Pnma, Z=4). The lattice parameters have been refined from X-ray powder data at 293 K as well: a=1597.06(6) pm, b=703.26(3) pm, c=1481.95(6) pm. The structure contains isolated distorted square-planar [CuO₄]⁵⁻ anions and non-coordinating sulfate groups. Furthermore, we report calculations of the Madelung Part of the Lattice Energy (MAPLE) and some of the physical properties of Na₁₁[CuO₄][SO₄]₃.     

Synthesis, structure, and ionic conductivity of Na5Li3Ti2S8

The compound Na₅Li₃Ti₂S₈ has been synthesized by the reaction of Ti with a Na/Li/S flux at 723 K. Na₅Li₃Ti₂S₈ crystallizes in a new structure type with four formula units in space group C2/c of the monoclinic system. The structure contains three crystallographically independent Na⁺ cations and two crystallographically independent Li⁺ cations. Na₅Li₃Ti₂S₈ possesses a channel structure that features two-dimensional layers built from Li(1)S₄ and TiS₄ tetrahedra. The layers, which are stacked along c, comprise eight-membered rings and sixteen-membered rings. Na(3)⁺ cations are located between the eight-membered rings and Na(1)⁺, Na(2)⁺, and Li(2)⁺ cations are located between the sixteen-membered rings. These cations are each octahedrally coordinated by six S²⁻ anions. The ionic conductivity σ_T of Na₅Li₃Ti₂S₈ ranges from 8.8×10⁻⁶ S/cm at 303 K to 3.8×10⁻⁴ S/cm at 483 K. The activation energy E_a is 0.40 eV.     

Electrochemical behavior and assembly of tetranuclear Dawson-derived sandwich compound [Cd4(H2O)2(As2W15O56)2] on 4-aminobenzoic acid modified glassy carbon electrode

The transition metal-substituted heteropolyoxoanion, Cd₄(H₂O)₂(As₂W₁₅O₅₆)₂¹²⁻ (As₄W₃₀Cd₄), is one of the trivacant Dawson derivatives. Its redox electrochemistry has been studied in acid buffer solutions using cyclic voltammetry. It exhibited three steps of four-electron redox waves attributed to redox processes of the tungsten-oxo framework. Through layer-by-layer assembly, the compound was first successfully immobilized on a 4-aminobenzoic acid modified glassy carbon electrode surface by alternate deposition with a quaternized poly(4-vinylpyridine) partially complexed with [Os(bpy)₂Cl]^2+/+ (denoted as QPVP-Os). Thus, prepared multilayer films have been characterized by cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy (UV-vis). The electrocatalytic activities of the multilayer films containing As₄W₃₀Cd₄ have been investigated on the reduction of three substrates of important analytical interests, NO₂⁻, BrO₃⁻ and IO₃⁻. And with the increase of the number of As₄W₃₀Cd₄ layers, the catalytic current towards the reduction of BrO₃⁻ was enhanced and the catalytic potential shifted positively.     

Confined rapid thermolysis/FTIR/ToF studies of imidazolium-based ionic liquids

Rapid scan FTIR spectroscopy and time-of-flight (ToF) mass spectrometry were utilized to study thermal decomposition of three imidazolium-based ionic liquids, with 1-ethyl-3-methyl-imidazolium (emim) as the cation, and NO₃⁻, Cl⁻, and Br⁻ as the anions. The thermal decomposition involved heating rates of 2000 K/s and temperatures to 435 °C in an ambient inert gas at 1 atm. Using sub-milligram quantities of each compound, examinations of the evolution of gas-phase species revealed that the most probable sites for proton transfer and subsequent secondary reactions were primarily the methyl group and secondarily the ethyl group. The ring appeared to remain intact, as there was no evidence of the formation of HCN, imines or related products. The most reactive compound is [emim]NO₃, since the nitrate group served as a strong oxidizer and reacted strongly with the methyl/ethyl groups at the elevated temperatures to produce common final products from combustion.     

Synthesis and spectroscopic characterization of P-doped Na4Si4

Na₄Si₄ is a Zintl salt composed of Na⁺ cations and tetrahedral anions and is a unique solid-state precursor to clathrate structures and nanomaterials. In order to provide opportunities for the synthesis of complex materials, phosphorus was explored as a possible substituent for silicon. Phosphorus doped sodium silicides Na₄Si_4−xP_x (x≤0.04) were prepared by reaction of Na with the mechanically alloyed Si_4−x:P_x (x=0.04, 0.08, 0.12) mixture in a sealed Nb tube at 650 °C for 3 days. Energy dispersive X-ray spectroscopy confirms the presence of P in all products. Powder X-ray diffraction patterns are consistent with the retention of the Na₄Si₄ crystal structure. As the amount of P increases, a new peak in the diffraction pattern that can be assigned to black phosphorus is apparent above the background. Raman and solid-state NMR provide information on phosphorus substitution in the Na₄Si₄ structure. Raman spectroscopy shows a shift of the most intense band assigned to the ν₁ (A₁) mode from 486.4 to 484.0 cm⁻¹ with increasing P, consistent with P replacement of Si. Differential nuclear spin-lattice relaxation for the Si sites determined via ²⁹Si solid-state NMR provides direct evidence for Si-P bonding in the (Si_1−xP_x)⁴⁻ tetrahedron. The ²³Na NMR shows additional Na…P interactions and the ³¹P NMR shows two P sites, consistent with P presence in both of the crystallographic sites in the (Si₄)⁴⁻ tetrahedron.     

Low-temperature single crystal X-ray diffraction and high-pressure Raman studies on [(CH3)2NH2]2[SbCl5]

The structure of bis(dimethylammonium) pentachloroantimonate(III), [(CH₃)₂NH₂]₂[SbCl₅], BDP, was studied at 15 K and ambient pressure by single-crystal X-ray diffraction as well as at ambient temperature and high pressures up to 4.87(5) GPa by Raman spectroscopy. BDP crystallizes in the orthorhombic Pnma space group with a=8.4069(4), b=11.7973(7), c=14.8496(7) Å, and Z=4; R₁=0.0381, wR₂=0.0764. The structure consists of distorted [SbCl₆]³⁻ octahedra forming zig-zag [{SbCl₅}_n]²ⁿ⁻ chains that are cross-linked by dimethylammonium [(CH₃)₂NH₂]⁺ cations. The organic and inorganic substructures are bound together by the N-H…Cl hydrogen bonds. The distortions of [SbCl₆]³⁻ units increase, partly due to the influence of the hydrogen bonds which became stronger, with decreasing temperature. The preliminary room temperature, high-pressure X-ray diffraction experiments suggest that BDP undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples. The transition is accompanied by changes in the intensities and positions of the Raman lines below 400 cm⁻¹.     

K2Li(NH2)3 and K2Na(NH2)3—synthesis and crystal structure of two crystal-chemically isotypic mixed-cationic amides

K₂Li(NH₂)₃ (1) was the only crystalline product obtained from the reaction of potassium with dilithium decahydro-closo-decaborate Li₂B₁₀H₁₀ in liquid ammonia at −38 °C. The compound crystallizes in the space group P4₂/m with Z=4, a=6.8720(5) Å, c=11.706(1) Å and V=552.81(7) Å³. The investigated crystal-chemically isotypic sodium compound K₂Na(NH₂)₃ (2) was merohedrally twinned and crystallized from a reaction mixture containing potassium and disodium decahydro-closo-decaborate Na₂B₁₀H₁₀ in liquid ammonia with a=7.0044(5) Å, c=12.362(1) Å and V=606.48(9) Å³. The compounds contain pairs of edge sharing tetraamidolithium or tetraamidosodium tetrahedra which are interconnected by potassium ions forming three-dimensional infinite networks.     

Synthesis and electrode performance of carbon coated Na2FePO4F for rechargeable Na batteries

Carbon-coated Na₂FePO₄F is synthesized by a simple solid-state method with ascorbic acid as carbon source. Structural characterization of Na₂FePO₄F by synchrotron X-ray diffraction, scanning/transmission electron microscopy, and Raman spectroscopy reveals that ascorbic acid effectively suppresses the particle growth of Na₂FePO₄F, forming the nano-sized carbon coated materials. Electrode performance of Na₂FePO₄F for rechargeable sodium batteries is also examined. The carbon-coated Na₂FePO₄F sample (1.3 wt% carbon) delivers initial discharge capacity of 110 mAh g^-1 at a rate of 1/20 C (6.2 mA g^-1) with well-defined voltage plateaus at 3.06 and 2.91 V vs. Na metal. The sample also shows acceptable capacity retention and rate capability as the positive electrode materials for rechargeable Na batteries, which is operable at room temperature.     

A Raman spectroscopic study of the phosphate mineral pyromorphite Pb5(PO4)3Cl

A series of selected pyromorphite minerals Pb₅(PO₄)₃Cl from different Australian localities has been studied by Raman spectroscopy complemented with selected infrared spectroscopy. The Raman spectrum of unsubstituted pyromorphite shows a single band at around 920 cm⁻¹ but for the natural minerals two bands at 919 and ∼932 cm⁻¹ attributed to the ν₁ (PO₄)³⁻ stretching vibration. The observation of multiple bands is attributed to the non-equivalence of phosphate units in the pyromorphite structure and the reduction in symmetry of the (PO₄)³⁻ units. This symmetry reduction is confirmed by the observation of multiple bands in both the ν₄ bending region (500–595 cm⁻¹) and the ν₂ bending region (350–500 cm⁻¹). The presence of isomorphic substitution of (PO₄)³⁻ by (AsO₄)³⁻ units is identified by the ν₁ symmetric stretching bands at around 824 and 851 cm⁻¹ and the ν₂ bending region around 331 and 354 cm⁻¹. Contrary to expectation Raman bands in the 3320–3700 cm⁻¹ region are observed and assigned to OH stretching bands of OH units resulting from the substitution of chloride anions in the pyromorphite structure. This study brings in to question the actual formula of natural pyromorphite as it is better represented as Pb₅(PO₄,AsO₄)₃(Cl,OH) · xH₂O.     

Ferromagnetic exchange coupling in phosphonato-bridged dinuclear copper(II) compound with monoethyl (pyridyn-2-ylmethyl)phosphonate ligand (2-mpmpe): Cu2(2-mpmpe)2(H2O)2(NO3)2

The interaction of diethyl (pyridyn-2-ylmethyl)phosphonate (2-pmpe) with Cu(NO₃)₂ · 6H₂O leads to a partial hydrolysis of the starting ligand and formation of the compound of the formula Cu₂(2-mpmpe)₂(H₂O)₂(NO₃)₂, where 2-mpmpe = monoethyl (pyridyn-2-ylmethyl)phosphonate. The crystal and molecular structure of a copper(II) compound was determined by single X-ray diffraction method. Its structure consists of five-coordinated in distorted square planar geometry (CuNO₄ chromophore) copper(II) ions doubly bridged by OPO from phosphonate. The Cu?Cu distance is 4.69 Å. The crystal packing is determined by the interdinuclear hydrogen bond system, which leads to a three-dimensional (3D) H-bonds network. The compound was characterized by infrared, ligand field, EPR spectroscopy, and magnetic studies. The magnetic properties of the title compound investigated over the 1.8–300 K, revealed the occurrence of a weak ferromagnetic coupling through phosphonate bridge (J = 1.86 cm⁻¹) and interdimer superexchange coupling through H-bond network (zJ′ = −0.17 cm⁻¹). Spectroscopic and magnetic properties are presented in the light of crystal structure.     

High-pressure synthesis and crystal structure of the lithium borate HP-LiB3O5

The new lithium borate HP-LiB₃O₅ was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 °C in a multianvil press with a Walker-type module. The compound crystallizes in the space group Pnma (no. 62) with the lattice parameters a=829.7(2), b=759.6(2), and c=1726.8(4) pm (Z=16). The high-pressure compound HP-LiB₃O₅ is built up from a three-dimensional network of BO₄ tetrahedra and BO₃ groups, which incorporates Li⁺ ions in channels along the b-axis. Band assignments of measured IR- and Raman spectra were done via quantum-mechanical calculations. Additionally, the thermal behavior of HP-LiB₃O₅ was investigated.     

Vibrational spectroscopy of the sorosilicate mineral hemimorphite Zn4(OH)2Si2O7 · H2O

Raman spectroscopy complimented by infrared spectroscopy has been used to study the mineral hemimorphite from different origins. The Raman spectra show consistently similar spectra with only one sample showing additional bands due to the presence of smithsonite. Raman bands observed at 3510–3565 and 3436–3455 cm⁻¹ are assigned to OH stretching vibrations. Using a Libowitzky type formula, these OH bands provide hydrogen bond distances of 0.2910, 0.2825, 0.2762 and 0.2716 pm. Water bending modes are observed in the Raman spectrum at 1633 cm⁻¹. An intense Raman band at 930 cm⁻¹ is attributed to SiO symmetric stretching vibration of the Si₂O₇ units. Raman bands observed at 451 and 400 cm⁻¹are attributed to out-of-plane bending vibrations of the Si₂O₇ units. Raman bands at 330, 280, 168 and 132 cm⁻¹ are assigned to ZnO and OZnO vibrations.     

Single crystal structure and Raman spectrum of Ba3Na2(CN2)4

The synthesis, single crystal structure determination, and Raman spectrum are reported for colorless transparent tribarium disodium tetracyanamide, Ba₃Na₂(CN₂)₄. The title compound crystallizes in the space group C_2h⁵-P2₁/c (#14, , , , β=110.454(4)°, , Z=4, R/wR=0.0266/0.0543). Each sodium atom is surrounded by six nitrogen atoms in octahedral geometry. Sodium centered nitrogen octahedra are linked through face-sharing along the [100] direction to form one-dimensional (1D) chains. These chains are connected to each other through the carbon atoms of cyanamide and make a three-dimensional (3D) network with 1D channels along the [100] direction. Barium atoms and additional cyanamide anions reside in the channels. Each barium atom is irregularly coordinated with nitrogen and carbon from the cyanamide anions. The Raman spectrum shows symmetric vibrations of [NCN]²⁻ corresponding to ν_sym (1241.5 cm⁻¹) and 2δ (1356.4 cm⁻¹).     

Potentiometric sensor using sub-micron Cu2O-doped RuO2 sensing electrode with improved antifouling resistance

A Cu₂O-doped RuO₂ sensing electrode (SE) for potentiometric detection of dissolved oxygen (DO) was prepared and its structure and electrochemical properties were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS) and energy-dispersive spectroscopy (EDS) techniques. Cu₂O-RuO₂-SE displayed a linear DO response from 0.5 to 8.0 ppm (log[O₂], −4.73 to −3.59) within a temperature range of 9-30 °C. The maximum sensitivity of −47.4 mV/decade at 7.27 pH was achieved at 10 mol% Cu₂O. Experimental evaluation of the Cu₂O-doped RuO₂-SE demonstrated that the doping of RuO₂ not only improves its structure but also enhances both sensor's selectivity and antifouling properties. Selectivity measurements revealed that 10 mol% Cu₂O-doped RuO₂-SE is insensitive to the presence of Na⁺, Mg²⁺, K⁺, Ca²⁺, NO₃⁻, PO₄²⁻ and SO₄²⁻ ions in the solution in the concentration range of 10⁻⁷-10⁻¹ mol/l.     

Synthesis and thermochemistry of MgO·3B2O3·3.5H2O

A new magnesium borate MgO·3B₂O₃·3.5H₂O has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₆O₉(OH)₂]·2.5H₂O. The enthalpy of solution of MgO·3B₂O₃·3.5H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5595.02±4.85) kJ mol⁻¹ of MgO·3B₂O₃3.5H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Synthesis, structure and magnetic properties of Na6Co2O6

Na₆Co₂O₆ was synthesized via the azide/nitrate route by reaction between NaN₃, NaNO₃ and Co₃O₄. Stoichiometric mixtures of the starting materials were heated in a special regime up to 500°C and annealed at this temperature for 50 h in silver crucibles. Single crystals have been grown by subsequent annealing of the reaction product at 500°C for 500 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structure (, Z=1, a=5.7345(3), b=5.8903(3), c=6.3503(3) Å, α=64.538(2), β=89.279(2), γ=85.233(2)°, 1006 independent reflections, R₁=8.34% (all data)), cobalt is tetrahedrally coordinated by oxygen. Each two CoO₄ tetrahedra are linked through a common edge forming Co₂O₆^6- anions. Cobalt ions within the dimers, being in a high spin state (S=2), are ferromagnetically coupled (J=17 cm^-1). An intercluster spin exchange (zJ′=−4.8 cm^-1) plays a significant role below 150 K and leads to an antiferromagnetically ordered state below 30 K. Heat capacity exhibits a λ-type anomaly at this temperature and yields a value of 19.5 J/mol K for the transition entropy, which is in good agreement with the theoretical value calculated for the ordering of the ferromagnetic-coupled dimers. In order to construct a model for the spin interactions in Na₆Co₂O₆, the magnetic properties of Na₅CoO₄ have been measured. This compound features isolated CoO₄ tetrahedra and shows a Curie-Weiss behavior (μ=5.14 μ_B, Θ=−20 K) down to 15 K. An antiferromagmetic ordering is observed in this compound below 10 K.