Dechlorination of poly(vinylidene chloride) in NaOH/ethylene glycol as a function of NaOH concentration, temperature, and solvent

The wet dechlorination treatment of poly(vinylidene chloride) (PVDC) was evaluated at atmospheric pressure in a solution of NaOH in ethylene glycol (EG), as a function of NaOH concentration, temperature, and solvent. Hydroxide ion from NaOH was required for dechlorination with EG acting solely as a solvent. The wet treatment exhibited significantly enhanced dechlorination efficiency over traditional thermal techniques, with a reaction efficiency as high as 92.8% in 1.0 M NaOH at 190 °C. Dechlorination reactions of PVDC in both NaOH/EG and NaOH/H₂O were expressed by an apparent first-order reaction. At 190 °C, the apparent rate constant in 1.0 M NaOH/EG was approximately 1.4 times larger than in 1.0 M NaOH/H₂O, with an apparent activation energy of 82.8 kJ mol⁻¹, indicating that the reaction proceeded under chemical control. The degree of dechlorination increased with increasing reaction temperature, favouring the elimination of HCl over the hydroxyl substitution of chloride.     

Dechlorination of poly(vinyl chloride) using NaOH in ethylene glycol under atmospheric pressure

A solution of NaOH dissolved in ethylene glycol (EG) was effective in the dechlorination of poly(vinyl chloride) (PVC) at atmospheric pressure. The degree of dechlorination increased with increasing temperature, reaching a maximum of 97.8% at 190 °C. The dechlorination proceeded under chemical control and exhibited first-order kinetics with an apparent activation energy of 170 kJ mol⁻¹. The apparent rate constant for dechlorination in 1.0 M NaOH/EG was approximately 150 times greater than that in 1.0 M NaOH/H₂O. In addition, dechlorination was faster at atmospheric pressure in NaOH/EG than under high pressure in NaOH/H₂O. The dechlorination reaction occurs via a combination of E2 and S_N2 mechanisms.     

Sodium hydroxide-assisted dechlorination of a poly(vinylidene chloride)-containing wrapping film in ethylene glycol solution

Poly(vinylidene chloride) (PVDC) wrapping film was dechlorinated using solutions of NaOH in ethylene glycol (EG) at temperatures between 150 and 190 °C. The reaction was comparable to that for PVDC powder; however, it occurred at a lower NaOH concentration, which can be explained by the dissolution of additives present in the wrapping film. Therefore, the best results for the dechlorination of the wrapping film were obtained at a temperature of 190 °C and NaOH concentrations of 0.1 M and 0.5 M, resulting in dechlorination yields of almost 90% after 135 min. For the dechlorination reaction, the activation energy of the PVDC wrapping film (185 kJ mol⁻¹) was determined to be higher than that of PVDC powder; this finding could be attributed to the presence of a stabilizer and the smaller surface area of the PVDC wrapping film.     

Kinetics of the dehydrochlorination of poly(vinyl chloride) in the presence of NaOH and various diols as solvents

The dehydrochlorination of PVC in the presence of NaOH was investigated in different diols. Diethylene glycol (DEG), triethylene glycol (TEG), and propylene glycol (PG) were found to be effective in accelerating the dechlorination of PVC. The dehydrochlorination was promoted in the order TEG > DEG > PG, which was in agreement with the compatibility between PET and the diol. Compatibility resulted in an improved penetration of the PVC particle by the solvent, leading to the acceleration of the dehydrochlorination. The dehydrochlorination of PVC in NaOH/diol followed first-order kinetics, confirming the progress of the reaction under chemical reaction control. The apparent activation energies were 82 kJ mol⁻¹, 109 kJ mol⁻¹, and 151 kJ mol⁻¹ for TEG, DEG, and PG, respectively. The lower the activation energy became the faster the dehydrochlorination of PVC proceeded.     

Dechlorination and oxidation for waste poly(vinylidene chloride) by hydrothermal catalytic oxidation on Pd/AC catalyst

Hydrothermal catalytic oxidation was an effective method in the dechlorination and oxidation of waste poly(vinylidene chloride) (PVC) on Pd/AC catalyst. The PVC was decomposed by hydrothermal catalytic oxidation in the system of NaOH at appropriate temperature in our experiments. The degree of dechlorination and oxidation increased with increasing concentration of H₂O₂, reaching up to 90% and 50% under the condition of 180 °C and 0.5 MPa pressure. The main products were Cl⁻ and CO₂, and the rest comprises a range of water-soluble organic acids, which were nontoxic and can be treated by biological purification. Therefore, the hydrothermal catalytic oxidation had significant potential in application for treatment of chlorinated waste plastics.     

Chemical modification of poly(vinyl chloride) by nucleophilic substitution

The reaction of poly(vinyl chloride) (PVC) in nucleophile (Nu)/ethylene glycol (EG) or Nu/N,N-dimethylformamide (DMF) solution was found to result in the substitution of Cl in PVC with Nu from solution, in addition to the straight elimination of HCl, both of which led to the dechlorination of PVC. Examined Nu⁻ were I⁻, SCN⁻, OH⁻, N₃⁻, and the phthalimide anion. For the Nu/EG solution, elimination was favoured over substitution for all Nu⁻. The ratio of substitution to dechlorination was notable, descending in the order OH⁻ > SCN⁻ = N₃⁻ > phthalimide anion > I⁻. For the Nu/DMF solution, the ratio of substitution to dechlorination was high, in the order SCN⁻ > N₃⁻ > I⁻ > phthalimide anion. In both cases, the orders of the ratios were similar to those of the nucleophilic reactivity constant, I⁻ > SCN⁻ > N₃⁻ > phthalimide anion, except for I⁻. The low ratio for I⁻ was attributable to the elimination of HI after the substitution of Cl in PVC with I in solution, because I⁻ is a strong nucleophile, as well as an excellent leaving group. Comparing the effect of EG and DMF on the substitution of Cl in PVC with Nu in solution, the ratio of substitution to dechlorination was higher for I⁻, SCN⁻, N₃⁻, and the phthalimide anion in DMF than in EG. The substitution of Cl in PVC with Nu in solution was found to occur preferentially in DMF versus EG.     

溶剂对聚氯乙烯-聚乙二醇-KOH体系脱氯行为的影响

废旧塑料的回收利用是当今研究的热点之一.据报道,2007年中国聚氯乙烯(PVC)产量高达960万吨[1],如何合理利用相应产生的废旧PVC是一个十分重要的课题.     

粗硼砂的氯化铵溶液浸提动力学

研究了反应温度、溶液浓度、固液比、固体粒径大小和搅拌速度对氯化铵溶液浸提粗硼砂(十水四硼酸钠,Na₂B₄O₇·10H₂O)动力学的影响。结果表明反应速率随反应温度、溶液浓度的增加和固体粒径、固液比的减小而增加,但搅拌速度对溶解速率无显著影响。根据均相和多相动反应力学模型研究了粗硼砂的溶解过程。结果表明溶解速率遵从假一级均相反应模型。粗硼砂在氯化铵溶液中溶解的活化能为82.73 kJ·mol^-1。     

氧化镁对聚丙烯/聚氯乙烯脱氯行为的影响

对废旧塑料的回收利用是近年来人们一直关注和不断研究的一个重要课题。将废塑料热裂解为燃料油或单体被认为是最具前景的处理方法之一[1]。当含有PVC的废旧塑料裂解时产生氯化氢气体,严重腐蚀设备;同时也会产生含氯的有机化合物,从而使其裂解生成的液体作为燃料使用时会生成有     

Structure of chlorinated poly(vinyl chloride). X. Conclusions on the chlorination mechanism

The chlorination of poly(vinyl chloride) (PVC) was investigated by using deuterated polymeric models of PVC, viz., α-deuterated PVC (α-d-PVC) and β,β-dideuterated PVC (β,β-d₂-PVC). The chlorinated samples of PVC, α-d-PVC, and β,β-d₂-PVC were examined by combining infrared (IR), ¹H-NMR, ¹³C-NMR, and mass spectroscopy. The results obtained were used in a study of the reaction mechanism of PVC chlorination. The selectivity of chlorination and the extent of the substitution and elimination-addition mechanism of chlorination are discussed with respect to the degree of chlorination and chlorination conditions.     

Dechlorination of 2,4-dichlorophenoxyacetic acid using biochar-supported nano-palladium/iron: Preparation,characterization, and influencing factors

In the present study, peanut shell, a green waste raw material, was used to prepare biochar (BC) and to obtain BC-supported nano-palladium/iron (BC-nPd/Fe) composites for removing 2,4-dichlorophenoxyacetic acid (2,4-D) from water. Characterization analysis demonstrated that nPd/Fe particles were well dispersed on the BC surface with weakened magnetic properties. The average particle diameter and specific surface area of nPd/Fe were 101.3 nm and 6.7 m² g⁻¹, whereas the corresponding values of the BC-nPd/Fe materials were 88.8 nm and 14.8 m² g⁻¹, respectively. Several factors were found to influence the dechlorination of 2,4-D, including the weight ratio of BC to Fe, Pd loading ratio, initial solution pH, 2,4-D concentration, and reaction temperature. Dechlorination results indicated that the 2,4-D removal and phenoxyacetic acid (PA) generation rates were 44.1% and 20.1%, respectively, in the nPd/Fe system, and 100.0% and 92.1%, respectively, in the BC-nPd/Fe system. The dechlorination of 2,4-D was well described by the pseudo-first-order kinetic model (R² > 0.97), and the observed rate constants k_obs were 0.0042 min (nPd/Fe) and 0.0578 min (BC-nPd/Fe), respectively. The reaction mechanism indicated that the dechlorination hydrogenation was the main process to remove 2,4-D from water in the BC-nPd/Fe system. In addition, BC inhibited the formation of a passivation layer on the particle surface during the reaction, thus maintaining the high reactivity of BC-nPd/Fe. The easy preparation technique, high 2,4-D dechlorination capacity, and mild reaction conditions suggest that BC-nPd/Fe may be a promising alternative composite to remove 2,4-D from water.     

Dechlorination of poly(vinyl chloride) by 1-butyl-3-methylimidazoliumhydroxide

Highly efficient dechlorination of PVC has been realized at 180 °C and at atmospheric pressure, using 1-butyl-3-methylimidazoliumhydroxide ([Bmim]OH) as an environment-friendly reaction medium: in the absence of an external base or solvent the dechlorination efficiency is as high as 91.2%, while it is only 38.1% for PVC without ionic liquids. The dechlorination process follows first-order kinetics with apparent activation energy of 44 kJ mol⁻¹. Mechanistic analysis provides evidence for the equilibrium presence of carbene species, together with the hydroxide ions in [Bmim]OH, thus enhancing the dechlorination of PVC via a combined elimination and substitution mechanism.     

Dehydrochlorination of poly(vinyl chloride) by aqueous sodium hydroxide solution under two-phase conditions

The reaction of poly(vinyl chloride) powder with aqueous sodium hydroxide solution in the presence of quaternary ammonium or phosphonium halides yielded dehydrochlorinated products of conjugated polyene structure. The reaction was discussed in terms of a phase transfer catalytic mechanism between aqueous and polymer phases. Among the catalysts used tetrabutylammonium bromide was the best. To obtain the optimum conditions the effects of reaction temperature, the concentration of NaOH and the catalyst, and the molecular weight of poly(vinyl chloride) were investigated. Treatment of PVC films and solutions in tetrahydrofuran with aqueous NaOH solutions under two-phase conditions also produced dehydrochlorinated films and powders.     

Diffusion of ethylene glycol accompanied by reactions in poly(ethylene terephthalate) melts

Diffusion coefficients of ethylene glycol (EG) have been measured in poly(ethylene terephthlate) (PET) melts by a quartz-spring sorption apparatus. A simple mathematical model was developed to investigate the sorption behavior accompanied by chemical reactions of EG and PET at high temperatures. Diffusion coefficients are deduced from experimental data for an asymptotically thin sample in order to minimize the effects of reactions. The diffusion coefficient of EG is strongly dependent on the vapor pressure of EG and temperature but not on the molecular weight of PET in this experimental range (degree of polymerization 80–120). The diffusion coefficient of EG in PET melt at 265°C is 2.58 × 10^?7 cm²/s at the limit of zero concentration of EG. The activation energy for diffusion is 38.4 kcal/gmol, and the heat of solution for sorption is ?44.9 kcal/gmol. The concentrations of the volatile materials resulting from reactions in PET-EG system were analyzed with gas chromatography. In addition, a fit of the current model to experimental data yields frequency factors for the polymerization reaction (k₁) and the acetaldehyde formation reaction (k₂) to be 5.84 × 10⁸ cm³/mol ? min and 3.90 × 10¹¹ min^?1, respectively.     

Magnetically loaded poly(methyl methacrylate-co-acrylic acid) nano particles

Magnetically loaded polymeric nano-particles carrying functional groups on their surface were prepared by a two-stage process. In the first stage, super-paramagnetic magnetite (Fe₃O₄) nano-particles were produced by a co-precipitation method from the aqueous solutions of FeCl₂·4H₂O and FeCl₃·6H₂O using a NaOH solution. The smallest size obtained was 40.9 nm with poly-dispersity index of 0.194 obtained by using a Zeta Sizer. The effects of Fe²⁺/Fe³⁺ molar ratio, stirring rate, temperature, base concentration, and pH on the particle size/size distribution and stability of the dispersions were examined. Increasing the relative concentration of Fe²⁺ ion and decreasing the stirring rate and pH increased the particle size, while the concentration of NaOH and temperature did not change the particle size significantly. Polymer coating was achieved by emulsion polymerization at high surfactant to monomer ratio of methyl methacrylate (MMA) and acrylic acid which were used as comonomers (comonomer ratio: 90/10 weight) with high surfactant to monomer ratio. The surfactant and initiator were SDS and KPS, respectively. Nano-particles in the range of 115 and 300 nm in diameter were produced depending on recipe. Increasing the Fe₃O₄/monomer and surfactant/monomer ratios, the KPS concentration caused a decrease in the average diameter. Magnetic properties of the nano-particles were obtained by electron spin resonance and vibrating-sample magnetometer. Most of the polymer-coated nano-particles exhibited super paramagnetic behavior.An erratum to this article can be found at     

Catalytic dechlorination of aromatic chloride with supported palladium catalysts in alkaline 2-propanol: influence of hydrocarbon solvents

Summary Catalytic dechlorination of p-chloroanisole (p-chloromethoxybenzene) was carried out in a solution of NaOH in 2-propanol in the presence of Pd/Al₂O₃ or Pd/C at 40°C. When aromatic hydrocarbons such as toluene or benzene were added to the solution, the dechlorination rates were strongly suppressed. However, aliphatic hydrocarbons such as n-hexane or cyclohexane hardly affected the dechlorination rates.     

End-point detection of the potentiometric titration of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly (vinyl chloride) membrane electrode and an anionic surfactant as a marker ion

A plasticized poly (vinyl chloride) (PVC) membrane electrode sensitive to dodecylbenzenesulfonate (DBS) ion is applied to the determination of anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) by potentiometric titration, using a poly (diallyldimethylammonium chloride) (Cat-floc) solution as a titrant. The end-point of the titration is detected as the potential jump of the plasticized PVC membrane electrode caused by decrease in the concentration of DBS ion added to the sample solution as a marker ion, due to the ion association reaction between the DBS ion and Cat-floc. The effects of the concentration of DBS ion, coexisting surfactants and electrolytes in the sample solution and pH of the sample on the degree of the potential jump at the end-point were examined. A linear relationship between the concentration of anionic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 2 × 10^–5 to 4 × 10^–4 N for PVSK, alginate, and carrageenan.     

Stereoselective nucleophilic substitution of poly(vinyl chloride) with potassium 4‐acetamidothiophenolate

The nucleophilic substitution reaction of poly(vinyl chloride) (PVC) with potassium 4‐acetamidothiophenolate was performed in a cyclohexanone solution. The quantitative microstructural analysis, as a function of the conversion, was followed by ¹³C NMR spectroscopy. Through a comparison of the microstructural changes with the degree of substitution, a small fraction of mmr tetrads was found to react occasionally with the central chlorine of the mr triad instead of the mm, such as for sodium benzenethiolate (NaBT). This conclusion was confirmed by Fourier transform infrared results. However, unlike NaBT, the evolution of the glass‐transition temperature (T_g) with the degree of conversion changed with the degree of substitution similarly to the ratio of the extents to which mmr and rrmr structures intervened in the substitution reaction. From these studies, it followed that the specific interactions due to the polar nature of the nucleophile enhanced the molecular‐microstructure‐based mechanisms, which were responsible for T_g. Such a novel quantitative correlation, compared with more tentative ones obtained previously, presents valuable insight into the role of the stereochemical microstructure in the glass‐transition process in PVC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1857–1867, 2004     

End-point detection of the potentiometric titration of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly (vinyl chloride) membrane electrode and an anionic surfactant as a marker ion

A plasticized poly (vinyl chloride) (PVC) membrane electrode sensitive to dodecylbenzenesulfonate (DBS) ion is applied to the determination of anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) by potentiometric titration, using a poly (diallyldimethylammonium chloride) (Cat-floc) solution as a titrant. The end-point of the titration is detected as the potential jump of the plasticized PVC membrane electrode caused by decrease in the concentration of DBS ion added to the sample solution as a marker ion, due to the ion association reaction between the DBS ion and Cat-floc. The effects of the concentration of DBS ion, coexisting surfactants and electrolytes in the sample solution and pH of the sample on the degree of the potential jump at the end-point were examined. A linear relationship between the concentration of anionic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 2 × 10^–5 to 4 × 10^–4 N for PVSK, alginate, and carrageenan. Received: 30 April 1998 / Revised: 6 July 1998 / Accepted: 11 August 1998     

Novel preparation of electrically conducting poly (vinyl chloride) by photo-dehydrochlorination from poly (vinyl chloride)/polypyrrole composite film

Polypyrrole (PPy) was deposited electrochemically on a platinum plate from a nitric acid solution of pyrrole. The PVC/PPy composite film was finally obtained by casting poly(vinyl chloride) (PVC) onto the PPy electrode from a tetrahydrofuran solution of PVC. The prepared composite film was irradiated at 90°C with a low-pressure mercury lamp in the stream of hydrogen gas saturated with steam, and the PVC film was dehydrochlorinated, leading to the formation of conjugated polyene. The electrical conductivity (σ) of the PVC film in the irradiated composite film was reveled: σ=2.51 × 10^?5S cm^?1. By iodine doping, σ was further enhanced up to 5.04 X 10^?3 S cm^?1. The tensile strength of the irradiated composite film became larger than that of the original PVC film; i.e., the stress at break was: 461 (composite film); 401 kg cm^?2 (PVC). These results were brought about by the doping of radical species to the conjugated polyene. The anion, NO^?₃, doped during the electrodeposition of PPy was photodecomposed to generate radical NO₂ and this species was doped to the polyene, resulting in the formation of electrically conductive PVC and mechanically improved composite film. © 1994 John Wiley & Sons, Inc.