End-point detection of the potentiometric titration of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly (vinyl chloride) membrane electrode and an anionic surfactant as a marker ion

A plasticized poly (vinyl chloride) (PVC) membrane electrode sensitive to dodecylbenzenesulfonate (DBS) ion is applied to the determination of anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) by potentiometric titration, using a poly (diallyldimethylammonium chloride) (Cat-floc) solution as a titrant. The end-point of the titration is detected as the potential jump of the plasticized PVC membrane electrode caused by decrease in the concentration of DBS ion added to the sample solution as a marker ion, due to the ion association reaction between the DBS ion and Cat-floc. The effects of the concentration of DBS ion, coexisting surfactants and electrolytes in the sample solution and pH of the sample on the degree of the potential jump at the end-point were examined. A linear relationship between the concentration of anionic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 2 × 10^–5 to 4 × 10^–4 N for PVSK, alginate, and carrageenan.     

Use of marker ion and cationic surfactant plastic membrane electrode for potentiometric titration of cationic polyelectrolytes

A plasticized poly (vinyl chloride) (PVC) membrane electrode sensitive to stearyltrimethylammonium (STA) ion is applied to the determination of cationic polyelectrolytes such as poly (diallyldimethylammonium chloride) (Cat-floc) by potentiometric titration, using a potassium poly (vinyl sulfate) (PVSK) solution as a titrant. The end-point of the titration is detected as the potential change of the plasticized PVC membrane electrode caused by decrease in the concentration of STA ion added to the sample solution as a marker ion due to the ion association reaction between the STA ion and PVSK. The effects of the concentration of STA ion, coexisting electrolytes in the sample solution and pH of the sample on the degree of the potential change at the end-point were examined. A linear relationship between the concentration of cationic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 2×10⁻⁵ to 4×10⁻⁴ N for Cat-floc, glycol chitosan, and methylglycol chitosan.     

Effect of hydrophobicity of marker anions on the sensitivity of end-point detection for potentiometric titrations of anionic polyelectrolytes

A potentiometric titration method is described for the determination of anionic polyelectrolytes using a marker anion and a plasticized poly (vinyl chloride) membrane electrode sensitive to this marker anion. A solution of an anionic polyelectrolyte, such as potassium poly (vinyl sulfate) (PVSK) added the marker ion has been titrated with a solution of poly (diallyldimethylammonium chloride) (Cat-floc). The end-point has been detected as a sharp potential change due to the rapid decrease in the concentration of the marker ion caused by its association with the titrant, Cat-floc. The sharpness of the endpoint of the titration curve has been compared for several marker ions and the dodecylbenzenesulfonate ion was found to be the best among the marker anions studied.     

Determination of cationic polyelectrolytes using a photometric titration with crystal violet as a color indicator

The reaction of the cationic dye, crystal violet (CV) with the anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) results in a decrease of the absorbance of CV at the maximum absorption wavelength (590 nm). This change of the absorption spectra of the CV has been already applied to the determination of anionic polyelectrolytes using flow injection analysis method. In this paper, CV was applied to the indicator for the determination of cationic polyelectrolytes such as poly (diallyldimethylammonium chloride) (Cat-floc) by photometric titration, using a PVSK solution as a titrant. The end-point of the titration is detected as the break point of the titration curve. A linear relationship between the concentration of cationic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 0 to 5×10⁻⁵ eq. mol dm⁻³ for Cat-floc, glycol chitosan and methylglycol chitosan. The effects of the concentration of CV and coexisting electrolytes in the sample solution and the effect of pH of the sample solution on the degree of the change of absorbance at the end-point were also examined.     

Potentiometric titration of anionic polyelectrolytes using a cationic surfactant solution as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric titration method for the direct determination of anionic polyelectrolytes using a plasticized poly(vinyl chloride) membrane electrode is described. A cationic surfactant solution is used as titrant. The method is based on ion association between the anionic polyelectrolyte in the sample and the cationic surfactant in the titrant. The end-point is detected as a sharp potential change due to an increase in the concentration of the free cationic surfactant at the equivalence point. The sharpness of the titration curve at the end-point is compared for several cationic surfactants; a solution of stearyltrimethylammonium ion has been found to be superior. Received: 8 October 1996 / Revised: 17 December 1996 / Accepted: 18 December 1996     

Potentiometric titration of anionic polyelectrolytes using a cationic surfactant solution as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric titration method for the direct determination of anionic polyelectrolytes using a plasticized poly(vinyl chloride) membrane electrode is described. A cationic surfactant solution is used as titrant. The method is based on ion association between the anionic polyelectrolyte in the sample and the cationic surfactant in the titrant. The end-point is detected as a sharp potential change due to an increase in the concentration of the free cationic surfactant at the equivalence point. The sharpness of the titration curve at the end-point is compared for several cationic surfactants; a solution of stearyltrimethylammonium ion has been found to be superior. Received: 8 October 1996 / Revised: 17 December 1996 / Accepted: 18 December 1996     

Potentiometric titration of polyhexamethylene biguanide hydrochloride with potassium poly(vinyl sulfate) solution using a cationic surfactant-selective electrode.

A potentiometric titration method using a cationic surfactant as an indicator cation and a plasticized poly(vinyl chloride) membrane electrode sensitive to the cationic surfactant is proposed for the determination of polyhexamethylene biguanide hydrochloride (PHMB-HCl), which is a cationic polyelectrolyte. A sample solution of PHMB-HCl containing an indicator cation (hexadecyltrimethylammonium ion, HTA) was titrated with a standard solution of an anionic polyelectrolyte, potassium poly(vinyl sulfate) (PVSK). The end-point was detected as a sharp potential change due to an abrupt decrease in the concentration of the indicator cation, HTA, which is caused by its association with PVSK. The effects of the concentrations of HTA ion and coexisting electrolytes in the sample solution on the degree of the potential change at the end-point were examined. A linear relationship between the concentration of PHMB-HCl and the end-point volume of the titrant exists in the concentration range from 2.0 x 10(-5) to 4.0 x 10(-4) M in the case that the concentration of HTA is 1.0 x 10(-5) M, and that from 1.0 x 10(-6) to 1.2 x 10(-5) M in the case that the concentration of HTA is 5.0 x 10(-6) M, respectively. The proposed method was applied to the determination of PHMB-HCl in some contact-lens detergents.     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate.     

Potentiometric back-titration of sulfate ion using a tetraphenylborate derivative as a titrant and a titrant-sensitive plasticized poly(vinyl chloride) membrane electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode without added ion-exchanger is described. A solution of a derivative of tetraphenylborate is used as titrant. The method is based on the ion association between an excess of 2-aminoperimidinium added to the sulfate containing sample and the tetraphenylborate derivative in the titrant. The titration end-point is detected as a sharp potential change due to an increase in the concentration of the free tetraphenylborate derivative at the equivalence point. The sharpness of the titration curve at the end-point is compared for two tetraphenylborate derivatives. Good results are obtained with a solution of sodium tetrakis (4-fluorophenyl) borate. Received: 9 March 1998 / Revised: 21 April 1998 / Accepted: 25 April 1998     

Determination of sulfate ion by potentiometric back-titration using sodium tetrakis (4-fluorophenyl) borate as a titrant and a titrant-sensitive electrode

A potentiometric back-titration method for the determination of sulfate ions using a plasticized poly(vinyl chloride) membrane electrode sensitive to a titrant is described. The method is based on ion association between the excess of 2-aminoperimidinium added to the sulfate ion in the sample and sodium tetrakis (4-fluorophenyl) borate (FPB) in the titrant. The titration end-point was detected as a sharp potential change due to an increase in the concentration of the free FPB at the equivalence point. The end-point was detected even in the presence of a 20-fold excess of common cations and anions relative to the concentration of the sulfate ion within approximately 2% of titration error. A linear relationship between the concentration of the sulfate ion and the end-point volume of the titrant exists in the sulfate ion concentration range from 2x10(-4) to 3x10(-3) mol l(-1) using 10(-2) mol l(-1) FPB solutions as the titrant. The present method could be applied to determine sulfate ions in sea water.     

Flow injection determination of anionic polyelectrolytes using an anionic surfactant-selective plasticized poly(vinyl chloride) membrane electrode detector

 A potentiometric flow injection method for the determination of anionic polyelectrolytes utilizing a flow-through type surfactant-selective electrode detector is described. The method is based on the detection of the concentration increase of anionic surfactant liberated from a reagent stream containing an ion associate between cationic polyelectrolyte, poly(diallyldimethylammonium chloride) and anionic surfactant, dodecylbenzenesulfonate, which is caused by the formation of a polyion complex between cationic and anionic polyelectrolytes. The response of the electrode detector as a peak-shaped signal was obtained for injected anionic polyelectrolyte samples. A linear relationship was found to exist between peak height and the logarithmic concentration of potassium poly (vinyl sulfate) (PVSK) with a slope of 30 mV decade^-1 in a concentration range of 1.0×10^-4 to 1.0×10^-3 mol/L. Identical relationships were obtained for sodium alginate and carageenan (also anionic polyelectrolytes) as for PVSK but with a lower sensitivity. The detection limit for PVSK was 2.5×10^-5 mol/L. The relative standard deviation for 5 injections of a 2.5×10^-4 mol/L PVSK solution was 1.3% and the sampling rate was ca. 10 samples h^-1. Received: 9 April 1996/Revised: 8 July 1996/Accepted: 14 July 1996     

Colloidal titration of aqueous zirconium solutions with poly(vinyl sulfate) by potentiometric endpoint detection using a toluidine blue selective electrode.

Zirconium oxy-salts were hydrolyzed to form positively charged polymer or cluster species in acidic solutions. The zirconium hydrolyzed polymer was found to react with a negatively charged polyelectrolyte, such as poly(vinyl sulfate), and to form a stoichiometric polyion complex. Thus, colloidal titration with poly(vinyl sulfate) was applied to measure the zirconium concentration in an acidic solution by using a Toluidine Blue selective plasticized poly(vinyl chloride) membrane electrode as a potentiometric end-point detecting device. The determination could be performed with 1% of the relative standard deviation. The colloidal titration stoichiometry at pH < or = 2 was one mol of zirconium per equivalent mol of poly(vinyl sulfate).     

Iodide‐Selective Electrode Based on Copper Phthalocyanine

Copper phthalocyanine was used as ion carrier for preparing polymeric membrane selective sensor for detection of iodide. The electrode was prepared by incorporating the ionophore into plasticized poly(vinyl chloride) (PVC) membrane, coated on the surface of graphite electrode. This novel electrode shows high selectivity for iodide with respect to many common inorganic and organic anions. The effects of membrane composition, pH and the influence of lipophilic cationic and anionic additives and also nature of plasticizer on the response characteristics of the electrode were investigated. A calibration plot with near‐Nernestian slope for iodide was observed over a wide linear range of five decades of concentration (5×10^?6?1×10^?1 M). The electrode has a fast response time, and micro‐molar detection limit (ca. 1×10^?6 M iodide) and could be used over a wide pH range of 3.0–8.0. Application of the electrode to the potentiometric titration of iodide ion with silver nitrate is reported. This sensor is used for determination of the minute amounts of iodide in lake water samples.     

Cetyldimethylethylammonium-Selective PVC Electrode Basedon its Ion-Associate with Phosphotungstic Acid

 A PVC membrane electrode selective for cetyldimethylethylammonium (CDEA) ion was prepared. The active element is a plasticized poly vinyl chloride membrane containing a dissolved ion associate complex of CDEA with phosphotungstic acid (PTA). The electrode showed a near-Nernstian response within the CDEA⁺ concentration range 2.34 × 10⁻⁶ to 1.96 × 10⁻⁴ M at 25 ± 1^{^}C, good selectivity, and is usable within the pH range 3.5–9.0. The isothermal temperature coefficient of the electrode amounted to −0.00012 V/°C. The electrode has been used for the direct determination of cetyldimethylethylammonium bromide either by the standard addition method or by potentiometric titration against PTA. Received January 1, 1998. Revision June 13, 2000.     

Anionic surfactant selective electrode for the titrimetric determination of anionic surfactant

The construction and characteristic performance of a PVC membrane electrode responsive for sodium dodecylsulfate (SDS) are described in this paper. The electrode based on CTA⁺DS^? ion pair as ionophore in PVC membrane displays a Nernstian slope of ?58.8 ± 0.7 mV/decade in a 1.32 × 10^?6 to 3.75 × 10^?3 mol L^?1 concentration range and a limit of detection of 1.13 × 10^?6 mol L^?1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving Hyamine as titrant. More than 100 titrations were carried out for the evaluation of the electrode parameters: the standard deviations of the equivalent volume and the equivalent potential, the height of the potential jump and the number of faulty titrations. The behavior of the electrode was assessed with regard to their usefulness in routine analysis.     

Application of a Zeolite-Poly(vinyl chloride) Electrode to Potentiometric Studies of Alkali Metal Ions

Potentiometric electrodes based on the incorporation of zeolite particles into poly(vinyl chloride) (PVC) membranes are described. The electrode characteristics are evaluated regarding the response towards alkali ions. PVC membranes plasticized with dibutyl phthalate and without lipophilic additives (co-exchanger) are used throughout this study. The electrode exhibits a Nernstian response over the alkali metal cation concentration range of 1.0 × 10^?4 to 1.0 × 10^?1 M with a slope of 57.0 ± 0.9 mV per decade of concentration with a working pH range 3.0–9.0 and a fast response time of ≤15 s. The selectivity coefficients for cesium ion as test species with respect to alkaline earth, ammonium, and some heavy metal ions are determined. The proposed zeolite-PVC electrode is applied to the determination of ionic surfactant.     

Lead selective membrane electrode using cryptand(222) neutral carrier

The construction, performance characteristics and applications of a polymeric membrance electrode for lead(II) ion are reported. The electrode was prepared by incorporating cryptand(222) as the neutral carrier into a plasticized poly(vinyl chloride) membrane. The influence of membrane composition, pH and concentration of internal reference solution were investigated. The electrode exhibits a potentiometric response for Pb²⁺ ion over the concentration range 10^–1–10^–5 M with a detection limit of 5 × 10^–6 M Pb²⁺. It shows a relatively fast response time of about 30 s and can be used for about two months without any considerable divergence in potential. The proposed sensor revealed good selectivities for Pb²⁺ in the presence of several metal ions and could be used in the pH range of 2.5 to 7.5. It was used as an indicator electrode in the potentiometric titration of Pb²⁺ with EDTA. Received: 20 November 1998 / Revised: 26 March 1999 / Accepted: 31 March 1999     

Lead selective membrane electrode using cryptand(222) neutral carrier

The construction, performance characteristics and applications of a polymeric membrance electrode for lead(II) ion are reported. The electrode was prepared by incorporating cryptand(222) as the neutral carrier into a plasticized poly(vinyl chloride) membrane. The influence of membrane composition, pH and concentration of internal reference solution were investigated. The electrode exhibits a potentiometric response for Pb²⁺ ion over the concentration range 10^–1–10^–5 M with a detection limit of 5 × 10^–6 M Pb²⁺. It shows a relatively fast response time of about 30 s and can be used for about two months without any considerable divergence in potential. The proposed sensor revealed good selectivities for Pb²⁺ in the presence of several metal ions and could be used in the pH range of 2.5 to 7.5. It was used as an indicator electrode in the potentiometric titration of Pb²⁺ with EDTA. Received: 20 November 1998 / Revised: 26 March 1999 / Accepted: 31 March 1999     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Calix[4]resorcinarene Ionophore in the Ion-Selective Electrodes with Plasticized Poly(vinylchloride) Membranes

Synthetic ionophore calix[4]resorcinarene was incorporated into the poly(vinyl chloride) (PVC) plasticized membrane of an ion-selective electrode (ISE). Calixarene interactions with quaternary ammonium and alkaline metals cations in the organic and water-organic media were carefully investigated by various authors. We studied the effects of choline and Na⁺ cations present in the working solution on the ionophore which was incorporated into a membrane phase. Due to the pH sensitivity of the ionophore, a study was undertaken in a wide range of pH values. The different characteristics of calix[4]resorcinarene interactions with these cations were discovered by the ISE with the PVC plasticized membrane containing this ionophore, which respond to both the choline and Na⁺ cations due to the variation of working solution pH.