An Anti CuO2‐type Metal Hydride Square Net Structure in Ln2M2As2Hx (Ln=La or Sm,M=Ti,V, Cr,or Mn)

Using a high pressure technique and the strong donating nature of H⁻, a new series of tetragonal La₂Fe₂Se₂O₃‐type layered mixed‐anion arsenides, Ln₂M₂As₂H_x, was synthesized (Ln=La or Sm, M=Ti, V, Cr, or Mn; x≈3). In these compounds, an unusual M₂H square net, which has anti CuO₂ square net structures accompanying two As³⁻ ions, is sandwiched by (LaH)₂ fluorite layers. Notably, strong metal–metal bonding with a distance of 2.80 Å was confirmed in La₂Ti₂As₂H_2.3, which has metallic properties. In fact, these compounds are situated near the boundary between salt‐like ionic hydrides and transition‐metal hydrides with metallic characters.     

Analysis of a cylindrical shell with spiral groove

Summary The analytical method is presented for a cylindrical shell with spiral groove. The governing equations of cylindrical shell derived by one of the authors are introduced and Kirchhoff's boundary conditions along any smooth path are deduced from the principle of energy. The analysis is carried out for a cylindrical shell under a uniform bending moment by considering the equilibrium conditions of a shell element. Numerical results are given for various geometrical parameters of cylindrical shell and the angle of the spiral groove, some of which are confirmed by an experiment.

---

übersicht Die analytische Methode wird für eine Kreiszylinderschale mit spiraler Fuge entwickelt. Die von einem der Verfasser eingeführten Differentialgleichungen der Kreiszylinderschale und die Kirchhoffschen Randbedingungen l?ngs des beliebig geneigten Randes, die vom Prinzip der Energie hergeleitet wurden, werden angegeben. Das Problem der Kreiszylinderschale mit spiraler Fuge unter einem uniformen Biegemoment wird unter Berücksichtigung der komplizierten Gleichgewichtsbedingungen der Schalenelemente analysiert. Die numerischen Ergebnisse zeigen gute übereinstimmung mit experimentellen Ergebnissen.

     

CO2 laser drives extreme ultraviolet nano-lithography — second life of mature laser technology

It was shown both theoretically and experimentally that nanosecond order laser pulses at 10.6 micron wavelength were superior for driving the Sn plasma extreme ultraviolet (EUV) source for nano-lithography for the reasons of higher conversion efficiency, lower production of debris and higher average power levels obtainable in CO₂ media without serious problems of beam distortions and nonlinear effects occurring in competing solid-state lasers at high intensities. The renewed interest in such pulse format, wavelength, repetition rates in excess of 50 kHz and average power levels in excess of 18 kiloWatt has sparked new opportunities for a matured multi-kiloWatt CO₂ laser technology. The power demand of EUV source could be only satisfied by a Master-Oscillator-Power-Amplifier system configuration, leading to a development of a new type of hybrid pulsed CO₂ laser employing a whole spectrum of CO₂ technology, such as fast flow systems and diffusion-cooled planar waveguide lasers, and relatively recent quantum cascade lasers. In this paper we review briefly the history of relevant pulsed CO₂ laser technology and the requirements for multi-kiloWatt CO₂ laser, intended for the laser-produced plasma EUV source, and present our recent advances, such as novel solid-state seeded master oscillator and efficient multi-pass amplifiers built on planar waveguide CO₂ lasers.     

Kinetics of the dehydrochlorination of poly(vinyl chloride) in the presence of NaOH and various diols as solvents

The dehydrochlorination of PVC in the presence of NaOH was investigated in different diols. Diethylene glycol (DEG), triethylene glycol (TEG), and propylene glycol (PG) were found to be effective in accelerating the dechlorination of PVC. The dehydrochlorination was promoted in the order TEG > DEG > PG, which was in agreement with the compatibility between PET and the diol. Compatibility resulted in an improved penetration of the PVC particle by the solvent, leading to the acceleration of the dehydrochlorination. The dehydrochlorination of PVC in NaOH/diol followed first-order kinetics, confirming the progress of the reaction under chemical reaction control. The apparent activation energies were 82 kJ mol⁻¹, 109 kJ mol⁻¹, and 151 kJ mol⁻¹ for TEG, DEG, and PG, respectively. The lower the activation energy became the faster the dehydrochlorination of PVC proceeded.     

Gas sorption in poly(vinyl benzoate)

High-pressure sorption (up to 50 atm) for CO₂, N₂, and Ar in poly(vinyl benzoate) (PVB) was studied at temperatures from 25 to 70°C by a gravimetric method utilizing an electromicrobalance. The results are described by Henry's law above the glass transition temperature T_g for all gases. The dual-mode sorption model, Henry's law plus a Langmuir isotherm, applies to the sorption isotherms of N₂ and Ar in the glassy state, and the dual-mode parameters are given. For CO₂, a new type of sorption isotherm is observed below T_g. The isotherm is concave to the pressure axis in the low-pressure region and turns into a straight line with increasing CO₂ pressure which can be extrapolated back to the coordinate origin. The linear part of the isotherm is characteristic of the rubbery state, while the nonlinear part stems from glassystate behavior. The “glass transition solubility” of CO₂, at which PVB film changes from the glassy to the rubbery state, decrease as the temperature increases. The disappearance of microvoids, that is, the decrease of the Langmuir capacity, may be due to a large plasticizing effect of sorbed CO₂. The difference between the N₂ and Ar isotherms and the CO₂ isotherm is discussed from this standpoint.     

Negative‐type photosensitive poly(phenylene ether) based on poly(2,6‐dimethyl‐1,4‐phenylene ether), a crosslinker,and a photoacid generator

A negative‐type photosensitive poly(phenylene ether) (PSPPE) based on poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), a novel crosslinker 4,4′‐methylene‐bis [2,6‐bis(methoxymethyl)phenol] (MBMP) having good compatibility with PPE, and diphenylidonium 9,10‐dimethoxy anthracene‐2‐sulfonate (DIAS) as a photoacid generator (PAG) has been developed. This resist consisting of PPE (73 wt %), MBMP (20 wt %) and DIAS (7 wt %) showed a high sensitivity (D_0.5) of 58 mJ/cm² and a contrast (γ_0.5) of 9.5 when it was exposed to i‐line (365 nm wavelength light), postexposure baked at 145 °C for 10 min, and developed with toluene at 25 °C. A fine negative image featuring 6 μm line‐and‐space pattern was obtained on the film exposed to 300 mJ/cm² of i‐line by a contact‐printed mode. The resulting polymer film cured at 300 °C for 1 h under nitrogen had a low dielectric constant (ε = 2.46) comparable to that of PPE and a higher T_g than that of PPE. In addition, the cured PSPPE film was pretty low water absorption (<0.05%) as same as PPE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4949–4958, 2008     

Study of Strangeness Photoproduction on the Neutron in the Threshold Region

Photoproduction of the neutral kaon on the deuteron has been investigated at the Research Center for Electron Photon Science, Tohoku University. We constructed the Neutral Kaon Spectrometer-2 for the detection of charged particles from the decay of the neutral kaon and the hyperon. We obtained a momentum distribution of K ⁰ with the inclusive measurement. It was consistent with the previous measurement. The total cross section of γ + d → K ⁰ + Λ + p was estimated from the measured integral cross section of γ + d → Λ + X. The total cross section with respect to the photon energy was compared with the theoretical calculations. It favored the Saclay-Lyon A model calculation with the ratio of the neutral to charged coupling constants of the axial-vector meson, K ₁, as ~ ?1.5. The energy dependence and the magnitude of the total cross section were similar to the total cross section of γ + p → K ⁺ Λ.     

Sorption and partial molar volume of gases in poly (dimethyl siloxane)

Sorption of N₂, O₂, Ar, CH₄, CO₂, C₂H₄, and C₂H₆ in poly (dimethyl siloxane) liquid and rubber and the dilation of the polymers due to sorption of the gases are studied at 25°C under pressures up to 50 atm. In the liquid, the sorption isotherms for low-solubility and high-solubility gases are described by Henry's law and the Flory–Huggins equation, respectively. Gas sorption in the rubber, which contains a 29 wt % silica filler, follows the dual-mode sorption model, though marked hysteresis is observed in the sorption of O₂ and CH₄. The dilation isotherms increase linearly or exponentially in both polymers with increasing pressure. Considering that gas molecules adsorbed into micropores of the filler particles do not participate in the dilation, partial molar volumes of the dissolved gases in the rubber are determined from data of sorption and dilation. The values are nearly equal to the partial molar volumes in the liquid (48–60 cm³/mol).