Study of K/Mn-MgO Supported Fe Catalysts with Fe（CO）5 and Fe（NO3）3 as Precursors for CO Hydrogenation to Light Alkenes

Two K/Mn-MgO supported catalysts were prepared by Fe（CO）5 and Fe（NO3）3 as precursor respectively. The obtained Fe-K/Mn-MgO catalysts were tested for CO hydrogenation to light alkenes and characterized by X-ray powder diffraction （XRD）, X-ray photoelectron spectra （XPS）, H2 temperature-programmed reduction （H2-TPR）, H2 CO and CO2 temperature-programmed desorption （H2, CO/CO2-TPD） and transmission electron microscope （TEM） The results indicated that the catalyst with 10 wt% Fe loading prepared by Fe（CO）5 as precursor showed better performance in syngas to light alkenes than ones obtained from Fe（NO3）3 as precursor, where the CO conversion was 62.50% and the selectivity was 55.95% at 350 ℃, 1.5 MPa and 1000 h^-1, respectively.     

Effect of cobalt weight content on the structure and catalytic properties of Co/CNT catalysts in the fischer–tropsch synthesis

Cobalt-based Fischer–Tropsch synthesis (FTS) catalysts containing 1 to 40 wt % cobalt supported on multi-walled carbon nanotubes (CNTs) have been investigated. The CNTs have been characterized by low-temperature nitrogen adsorption, scanning electron microscopy, and X-ray photoelectron spectroscopy. All catalysts have been prepared by impregnating, with an ethanolic solution of cobalt nitrate, the CNTs preoxidized with concentrated nitric acid and have been tested in the FTS at 220°C and atmospheric pressure. Correlations have been established between the cobalt weight content of the catalyst and the Co particle size determined by transmission electron microscopy and X-ray diffraction. The Co content and particle size have an effect on the activity and selectivity of the catalyst and on the target fraction (C₅₊) yield in the FTS. The highest CO conversion is observed for the catalyst containing 20 wt % Co; the highest selectivity and activity, for the catalyst containing 5 wt % Co; the highest C₅₊ yield, for the catalyst containing 10 wt % Co.     

Effects of titanium silicalite and TiO2 nanocomposites on supported Co‐based catalysts for Fischer–Tropsch synthesis

Titanium silicalite (TS) and TiO₂ nanocomposites were prepared by mixing TS and TiO₂ with different ratios in ethanol. They were impregnated with 15 wt% Co loading to afford Co‐based catalysts. Fischer–Tropsch synthesis (FTS) performance of these TS–TiO₂ nanocomposite‐supported Co‐based catalysts was studied in a fixed‐bed tubular reactor. The results reveal that the Co/TS–TiO₂ catalysts have better catalytic performance than Co/TS or Co/TiO₂ each with a single support, showing the synergistic effect of the binary TS–TiO₂ support. Among the TS–TiO₂ nanocomposite‐supported Co‐based catalysts, Co/TS–TiO₂‐1 presents the highest activity. These catalysts were characterized using N₂ adsorption–desorption measurements, X‐ray diffraction, X‐ray photoelectron spectroscopy, H₂ temperature‐programmed reduction, H₂ temperature‐programmed desorption and transmission electron microscopy. It was found that the position of the active component has a significant effect on the catalytic activity. In the TS–TiO₂ nanocomposites, cobalt oxides located at the new pores developed between TS and TiO₂ can exhibit better catalytic activity. Also, a positive relationship is observed between Co dispersion and FTS catalytic performance for all catalysts. The catalytic activity is improved on increasing the dispersion of Co.     

Synthesis new Co–Mn mixed oxide catalyst for the production of light olefins by tuning the catalyst structure

In order to increase the catalyst activity for Fischer–Tropsch synthesis (FTS), the preparation methods of two new catalysts were studied. The chemically identical bimetallic Co–Mn/Al₂O₃ catalysts were synthesized by different synthetic methods: (a) via thermal decomposition of the complex [Co_1.33Mn_0.667(C₇H₃NO₄)₂(H₂O)₅].2H₂O ( 1 ) and (b) by the impregnation technique. The complex was characterized by the single‐crystal analysis, elemental analysis, and Fourier‐transform infrared (FT‐IR) spectroscopy. Both catalysts were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectrometry (EDS), Brunauer–Emmett–Teller (BET) specific surface area, hydrogen temperature‐programmed reduction (H₂‐TPR), and H₂‐chemisorption. The catalysts' activity was investigated for the Fischer–Tropsch synthesis in a fixed bed microreactor. Higher activity was obtained for the catalyst prepared by thermal decomposition of the inorganic precursor due to its small particle size, superior dispersion, and higher surface area. The results show that the catalyst prepared thermal decomposition has 21% ethylene, 10% propylene, and 50% C₅⁺ selectivity, while methane selectivity of this catalyst is 11% at 250°C. On the other hand, the catalyst obtained by the impregnation method displays 15% ethylene, 8% propylene, 29% C₅⁺_, and 29% methane selectivity at the same temperature.     

Characterization and catalytic behavior of EDTA modified silica nanosprings (NS)-supported cobalt catalyst for Fischer-Tropsch CO-hydrogenation

The effect of ethylene diamine tetraacetic acid(EDTA) modification on the physico-chemical properties and catalytic performance of silica nanosprings(NS) supported cobalt(Co) catalyst was investigated in the conversion of syngas(H~(2+) CO) to hydrocarbons by Fischer-Tropsch synthesis(FTS). The unmodified Co/NS and modified Co/NS-EDTA catalysts were synthesized via an impregnation method. The prepared Co/NS and Co/NS-EDTA catalysts were characterized before the FTS reaction by BET surface area,X-ray diffraction(XRD),transmission electron microscopy(TEM),temperature programmed reduction(TPR),X-ray photoelectron spectroscopy(XPS),differential thermal analysis(DTA) and thermogravimetric analysis(TGA) in order to find correlations between physico-chemical properties of catalysts and catalytic performance. FTS was carried out in a quartz fixedbed microreactor(H_2/CO of 2 ∶1,230 ℃ and atmospheric pressure) and the products trapped and analyzed by GC-TCD and GC-MS to determine CO conversion and reaction selectivity. The experimental results indicated that the modified Co/NS-EDTA catalyst displayed a more-dispersed phase of Co_3O_4 nanoparticles(10.9%) and the Co_3O_4 average crystallite size was about 12.4 nm. The EDTA modified catalyst showed relatively higher CO conversion(70.3%) and selectivity toward C_(6-18)(JP-8,Jet A and diesel) than the Co/NS catalyst(C_(6-14))(JP-4).     

Synthesis and Reactivity of Organometallic Intermediates Relevant to Cobalt‐Catalyzed Hydroformylation

Intermediates relevant to cobalt‐catalyzed alkene hydroformylation have been isolated and evaluated in fundamental organometallic transformations relevant to aldehyde formation. The 18‐electron (R,R)‐(^iPrDuPhos)Co(CO)₂H has been structurally characterized, and it promotes exclusive hydrogenation of styrene in the presence of 50 bar of H₂/CO gas (1:1) at 100 °C. Deuterium‐labeling studies established reversible 2,1‐insertion of styrene into the Co?D bond of (R,R)‐(^iPrDuPhos)Co(CO)₂D. Whereas rapid β‐hydrogen elimination from cobalt alkyls occurred under an N₂ atmosphere, alkylation of (R,R)‐(^iPrDuPhos)Co(CO)₂Cl in the presence of CO enabled the interception of (R,R)‐(^iPrDuPhos)Co(CO)₂C(O)CH₂CH₂Ph, which upon hydrogenolysis under 4 atm H₂ produced the corresponding aldehyde and cobalt hydride, demonstrating the feasibility of elementary steps in hydroformylation. Both the hydride and chloride derivatives, (X=H^?, Cl^?), underwent exchange with free ¹³CO. Under reduced pressure, (R,R)‐(^iPrDuPhos)Co(CO)₂Cl underwent CO dissociation to form (R,R)‐(^iPrDuPhos)Co(CO)Cl.     

Cobalt Single‐Atom Catalysts with High Stability for Selective Dehydrogenation of Formic Acid

Metal–organic framework (MOF)‐derived Co‐N‐C catalysts with isolated single cobalt atoms have been synthesized and compared with cobalt nanoparticles for formic acid dehydrogenation. The atomically dispersed Co‐N‐C catalyst achieves superior activity, better acid resistance, and improved long‐term stability compared with nanoparticles synthesized by a similar route. High‐angle annular dark‐field–scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, electron paramagnetic resonance, and X‐ray absorption fine structure characterizations reveal the formation of Co^IIN_x centers as active sites. The optimal low‐cost catalyst is a promising candidate for liquid H₂ generation.     

活性炭负载的钴基催化剂催化费托合成反应一步合成C1-C18混合醇：二氧化硅助剂的作用

采用费托合成反应以及X射线衍射、H2程序升温还原、CO脉冲化学吸附和N2物理吸附表征手段研究了SiO2助剂对活性炭负载的钴基催化剂上生成C1?C18混合醇的影响。结果表明, SiO2的添加抑制了钴物种的还原,但提高了钴物种的分散度,同时抑制了金属钴颗粒在反应过程中的团聚,从而显著提高了催化剂的活性。适量SiO2的添加促进了碳化钴的生成,从而提高了总醇选择性。重要的是,通过SiO2抑制钴物种的还原,导致大量二价钴物种的生成,从而有助于CO插入到碳链中间体中而使高碳醇容易生成。     

Werner Complexes with ω‐Dimethylaminoalkyl Substituted Ethylenediamine Ligands: Bifunctional Hydrogen‐Bond‐Donor Catalysts for Highly Enantioselective Michael Additions

The racemic carbonate complex [Co(en)₂O₂CO]⁺ Cl^? (en=1,2‐ethylenediamine) and (S)‐[H₃NCH((CH₂)_nNHMe₂)CH₂NH₃]³⁺ 3 Cl^? (n=1–4) react (water, charcoal, 100 °C) to give [Co(en)₂((S)‐H₂NCH((CH₂)_nNHMe₂)CH₂NH₂)]⁴⁺ 4 Cl^? ( 3 a – d H⁴⁺ 4 Cl^?) as a mixture of Λ/Δ diastereomers that separate on chiral‐phase Sephadex columns. These are treated with NaOH/Na⁺ BAr_f^? (BAr_f=B(3,5‐C₆H₃(CF₃)₂)₄) to give lipophilic Λ‐ and Δ‐ 3 a–d ³⁺ 3 BAr_f^?, which are screened as catalysts (10 mol %) for additions of dialkyl malonates to nitroalkenes. Optimal results are obtained with Λ‐ 3 c ³⁺ 3 BAr_f^? (CH₂Cl₂, ?35 °C; 98–82 % yields and 99–93 % ee for six β‐arylnitroethenes). The monofunctional catalysts Λ‐ and Δ‐[Co(en)₃]³⁺ 3 BAr_f^? give enantioselectivities of <10 % ee with equal loadings of Et₃N. The crystal structure of Δ‐ 3 a H⁴⁺ 4 Cl^? provides a starting point for speculation regarding transition‐state assemblies.     

费托合成:SiO_2和Al_2O_3负载的Co_2C催化剂的表征和评价

采用CO碳化SiO2和Al3O4负载的Co(NO3)2的方法制备了SiO2和Al3O4负载的Co2C催化剂,采用N2物理吸附、X射线衍射和H2-程序升温还原技术对催化剂进行了表征,并用于催化费托合成反应中.结果显示,需要较长碳化时间才可合成负载的Co2C催化剂;所制催化剂表现出CO加氢生成高碳醇的催化性能,其原因可能在于催化剂表面存在的金属Co物种使CO解离,表面Co物种有利于CO插入,从而导致醇的生成,但体相Co2C则不具有催化活性.     

Dimanganese Bridging Borylene Complexes and their Reactions with Unsaturated Palladium(0) Complexes – Syntheses,Structures and Calculated Properties

The dimanganese bridging borylene complex [μ‐BMes {(η⁵‐C₅H₄Me)Mn(CO)₂}₂] was synthesized from Mes(Cl)BB(Cl)Mes and K[(η⁵‐C₅H₄Me)Mn(CO)₂H] at low temperature, providing a small sample after manual separation of crystals, allowing a perfunctory spectroscopic analysis, but affording conclusive X‐ray crystallographic structural data. The trimetallic bridging borylene complex [(μ³‐BCl){{(η⁵‐C₅H₄Me)Mn(CO)₂} {Pd(PCy₃)}₂}] was prepared by the addition of [Pd(PCy₃)₂] to a solution of [μ‐BCl{(η⁵‐C₅H₄Me)Mn(CO)₂}₂], affording pure crystals that were fully characterised including X‐ray crystallographic analysis. The structure is reconciled with detailed theoretical analysis for related model complexes, [(μ³‐BX){{(η⁵‐C₅H₅)Mn(CO)₂}{Pd(PMe₃)}₂}] (X = Me, Cl).     

Oxygen bridged Homobinuclear Mn(II) compounds with Anthranilic acid: Theoretical calculations,oxidation and catalase activity

Two new homobinuclear manganese compounds with mixed ligands, [Mn₂(μ_1,1–2‐NH₂C₆H₄COO)₂(phen)₄](ClO₄)2(CH₃OH) ( 1 ), and [Mn₂(μ_1,3–2‐NH₂C₆H₄COO)₂(bipy)₄](ClO₄)2 ( 2 ) (NH₂C₆H₄COOH = anthranilic acid, bipy = 2,2′‐bipyridine, phen = 1,10‐ phenanthroline) were synthesized and thoroughly characterized by elemental analysis, IR, UV and single crystal X‐ray crystallography. X‐ray structure analysis shows that in the mono‐ and bidentate carboxylate bridged compounds, Mn–Mn distances of 1 and 2 are 3,461 Å, and 4,639 Å, respectively. The energy of the compounds was determined with a DFT (Density Functional Theory) calculation on B3LYP/6‐31G(d,p) optimized geometry by using the B3LYP/6‐31G(d,p) basis set. These compounds acts as biomimetic catalyst and show catalase‐like activity for the hydrogen peroxide dismutation at room temperature in different solvents with remarkable activity (TOF, Turnover frequency = mol of subst./(mol of cat. × time)) up to 12640 h^?1 with 1 , and 17910 h^?1 with 2 in Tris–HCl buffer). Moreover, the catalytic activity of 1 and 2 has been studied for oxidation of alcohols (cinnamyl alcohol, benzyl alcohol, cyclohexanol, 1‐octanol and 1‐heptanol) and alkenes (cyclohexene, styrene, ethyl benzene, 1‐octene and 1‐hexene) in a homogeneous catalytic system consisting t‐butylhydroperoxide (TBHP) as an oxidant in acetonitrile. Both compounds exhibited very high activity in the oxidation of cyclohexene to cyclohexanone (~80% selectivity, ~99% conversion in 1 h, TOF = 243 h^?1 and 226 h^?1) and cinnamyl alcohol to cinnamaldehyde (~64% selectivity) as the main product with very high TOF value (9180 h^?1 and 13040 h^?1 in the first minute of reaction) (~100% conversion in 0.5 h) with TBHP at 70 °C in acetonitrile, for 1 and 2 , respectively.     

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Despite significant progress achieved in Fischer–Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn²⁺‐ion exchanged ZSM‐5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO₂) at 20 % CO conversion. NMR spectroscopy, X‐ray absorption spectroscopy, and X‐ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM‐5. Quasi‐in‐situ solid‐state NMR, obtained by quenching the reaction in liquid N₂, detects C₂ species such as acetyl (‐COCH₃) bonding with an oxygen, ethyl (‐CH₂CH₃) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C?C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn²⁺‐ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ‐13, MCM‐22, and ZSM‐12) all give ethane predominantly. By contrast, a physical mixture of ZnO‐ZSM‐5 favors formation of hydrocarbons beyond C₃₊. These results provide an important guide for tuning the product selectivity in syngas conversion.     

Alternating copolymerization of propylene oxide with carbon monoxide catalyzed by Co complex and Co/Ru complexes

Co₂(CO)₈ catalyzes the ring‐opening copolymerization of propylene oxide with CO to afford the polyester in the presence of various amine cocatalysts. The ¹H and ¹³C{¹H} NMR spectra of the polyester, obtained by the Co₂(CO)₈–3‐hydroxypyridine catalyst, show the following structure ? [CH₂? CH(CH₃)? O? CO]_n? . The Co₂(CO)₈–phenol catalyst gives the polyester, which contains the partial structural unit formed through the ring‐opening copolymerization of tetrahydrofuran with CO. The bidentate amines, such as bipyridine and N,N,N′,N′‐tetramethylethylenediamine, enhance the Co complex‐catalyzed copolymerization, which produces the polyester with a regulated structure. Acylcobalt complexes, (RCO)Co(CO)_n (R = Me or CH₂Ph), prepared in situ, do not catalyze the copolymerization even in the presence of pyridine. This suggests that the chain growth involves the intermolecular nucleophilic addition of the OH group of the intermediate complex to the acyl–cobalt bond, forming an ester bond rather than the insertion of propylene oxide into the acyl–cobalt bond. Co₂(CO)₈? Ru₃(CO)₁₂ mixtures also bring about the copolymerization of propylene oxide with CO. The molar ratio of Ru to Co affects the yield, molecular weight, and structure of the produced copolymer. The catalysis is ascribed to the Ru? Co mixed‐metal cluster formed in the reaction mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4530–4537, 2002     

Synthesis,Structure and Magnetic Properties of Two Cobalt(II) Dicyanamide (dca) Complexes with Heterocyclic Nitrogen Donors Tetra(2‐pyridyl)pyrazine (tppz) and 2,4,6‐Tri(2‐pyridyl)‐1,3,5‐triazine (tptz): [Co2(tppz)(dca)4]·CH3CN and [Co(tptz)(dca)(H2O)](dca)

Two new transition metal dicyanamide complexes [Co₂(tppz)(dca)₄]·CH₃CN ( 1 ) [tppz=tetra(2‐pyridyl)pyrazine, dca=dicyanamide] and [Co(tptz)(dca)(H₂O)](dca) ( 2 ) [tptz=2,4,6‐tri(2‐pyridyl)‐1,3,5‐triazine] were synthesized and characterized by single crystal X‐ray diffraction analysis. In 1 each cobalt(II) atom is coordinated to three dca anions and one tppz molecule to form a distorted octahedral geometry, the neigbour two cobalt(II) atoms are bridged by one tppz ligand to form a dimer, then the cobalt(II) atoms in each dimer are joined together to form a ladder chain structure. In 2 the coordination geometry around the central metal is also distorted octahedral, each cobalt(II) atom is coordinated by two dca anions, one tptz molecule and one water ligand to form a cationic part, and the cationic part is linked with the free dca anions via the electrostatic attraction to give an infinite chain structure. Magnetic susceptibility measurement in the range of 2–300 K indicates that there are antiferromagnetic couplings between adjacent metal ions in 1 (T>29 K, (=?9.78 K, C=4.92 cm³·K·mol^?1) and ferromagnetic couplings in 2 (T>150 K, (=7.97 K, C=2.59 cm³·K·mol^?1) respectively.     

Formation of CaCO3 deposits on OMS‐2 surface to synergistically promote peroxymonosulfate activation and organic dyes degradation

The development of green and efficient catalysts for peroxymonosulfate (PMS) activation and organic pollutants degradation has received widespread attention. In this study, the hybrid CaCO₃/OMS‐2 catalysts were prepared by a simple precipitation approach and characterized by X‐ray powder diffraction, N₂ adsorption–desorption, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and cyclic voltammetry. It was found that deposition of CaCO₃ on OMS‐2 surface can weaken the Mn‐O bond by formation of Ca‐O‐Mn bond. The interactions between CaCO₃ and OMS‐2 significantly enhanced Acid Orange 7 degradation in the presence of PMS with a pseudo‐first‐order kinetic constant of 0.21 min^?1, which was much higher than those of OMS‐2 (0.026 min^?1) and CaCO₃ (0.021 min^?1). The CaCO₃/OMS catalysts were also much more efficient than other reported OMS‐2 hybrid catalysts, and could be performed over a wide solution pH and for other organic dyes degradation. Sulfate and hydroxyl radicals were formed from the oxidation of low valent manganese species by PMS as the active species in the system. This study can provide a simple method for the design of efficient manganese‐based hybrids for wastewater remediation via PMS activation.     

Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

A Two‐Coordinate Cobalt(II) Imido Complex with NHC Ligation: Synthesis,Structure, and Reactivity

The synthesis, structural characterization, and reactivity of the first two‐coordinate cobalt complex featuring a metal–element multiple bond [(IPr)Co(NDmp)] ( 4 ; IPr=1,3‐bis(2′,6′‐diisopropylphenyl)imidazole‐2‐ylidene; Dmp=2,6‐dimesitylphenyl) is reported. Complex 4 was prepared from the reaction of [(IPr)Co(η²‐vtms)₂] (vtms=vinyltrimethylsilane) with DmpN₃. An X‐ray diffraction study revealed its linear C? Co? N core and a short Co? N distance (1.691(6) Å). Spectroscopic characterization and calculation studies indicated the high‐spin nature of 4 and the multiple‐bond character of the Co? N bond. Complex 4 effected group‐transfer reactions to CO and ethylene to form isocyanide and imine, respectively. It also facilitated E? H (E=C, Si) σ‐bond activation of terminal alkyne and hydrosilanes to produce the corresponding cobalt(II) alkynyl and cobalt(II) hydride complexes as 1,2‐addition products.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

Oxamido‐bridged N4 Macrocyclic Complexes CuII/MII/CuII (M = Mn,Co): Synthesis,Crystal Structures and Magnetic Properties

Two new oxamido‐bridged N₄ macrocyclic complexes [(CuL)₂Mn(C₂H₅OH)₂](ClO₄)₂ · 2C₂H₅OH ( 1 ) and [(CuL)₂Co‐(C₂H₅OH)₂](ClO₄)₂ · 2C₂H₅OH ( 2 ) (H₂L = 2,3‐dioxo‐5,6:14,15‐di‐benzo‐7,13‐diphenyl‐1,4,8,12‐tetraazacyclo‐pentadeca‐7,13‐diene) have been synthesized and structurally characterized by X‐ray crystallographic investigations. In the two complexes, all copper(II) ions adopt a slightly distorted square‐planar configuration and the central manganese(II) and cobalt(II) ions are set in a distorted octahedral coordination sphere, connected to the other CuL fragments through exo‐cis oxamido bridges. The analyses of the magnetic properties were carried out by means of the theoretical expression of the magnetic susceptibility deduced from the spin Hamiltonian ? = –2J?₁?₂, leading to J = –14.58 cm^–1 for complex 1 and J = –26.95 cm^–1 for complex 2 , respectively.