Analysis of inflammatory biomarkers from tissue biopsies by chip-based immunoaffinity CE

To aid in the biochemical analysis of human skin biopsies, a semiautomatic chip-based CE system has been developed for measuring inflammatory biomarkers in microdissected areas of the biopsy. Following solubilization of the dissected tissue, the desired biomarkers were isolated by immunoaffinity capture using a panel of 12 antibodies, immobilized on a disposable glass fiber disk, within the extraction port of the chip. The captured analytes were labeled with a 635 nm light-emitting laser dye and electroeluted into the separation channel. Electrophoretic separation of all of the analytes was achieved in 2.2 min with quantification of each peak being performed by online LIF detection and integration of each peak area. Comparison of the results obtained from the chip-based system to those obtained using commercially available high-sensitivity immunoassays demonstrated that the chip-based assay provides a fast, accurate procedure for studying the concentrations of inflammatory biomarkers in complex biological materials. The degree of accuracy and precision achieved by the chip-based CE is comparable to conventional immunoassays and the system is capable of analyzing circa six samples per hour. With the ever-expanding array of antibodies that are commercially available, this chip-based system can be applied to a wide variety of different biomedical analyses.     

Measurement of neuropeptides in clinical samples using chip-based immunoaffinity capillary electrophoresis

The current interest in micro-fabrication has extended to the clinical arena where there is a growing lobby for promoting these for point-of-care purposes. The advantages of such devices are their relative speed of analysis, lower reagent costs, and their application to clinical screening and diagnosis. Two chip-based capillary electrophoresis systems have been designed and their performance evaluated for rapidly measuring the concentrations of inflammatory neuropeptides in tissue fluids of patients with neuropeptide-associated muscle pain. Both chips were manufactured to fit a commercially available chip electrophoresis system. One chip was designed to perform electrokinetic flow immunoassays while the other utilized an immunoaffinity port, containing an array of immobilized antibodies, to capture the analytes of interest. Comparison of the results to commercially available high-sensitivity immunoassays demonstrated that both chip-based systems could provide a relatively fast, accurate procedure for studying inflammatory biomarkers in complex biological fluids. However, the immunoaffinity capture system proved the superior of the two chips. Using this system, twelve different inflammation-associated mediators could be determined in approximately 2 min as compared to 30 min when using the flow immunoassay chip. With the ever-expanding array of antibodies that are commercially available, this chip-based system can be applied to a wide variety of different analyses.     

A chip-based immunoaffinity capillary electrophoresis assay for assessing hormones in human biological fluids

A chip-based capillary electrophoresis system has been designed for assessing the concentrations of four hormones in whole human blood, saliva, and urine. The desired analytes were isolated by immunoextraction using a panel of four analyte-specific antibodies immobilized onto a glass fiber insert within the injection port of the chip. Following extraction, the captured analytes were labeled prior to electro-elution into the chip separation channel, where they were resolved into four individual peaks in circa 2 min. Quantification of each peak was achieved by on-line LIF detection and integration of the area under each peak. Comparison to commercial high-sensitivity immunoassays demonstrated that the chip-based assay provided fast, accurate, and precise measurements for the analytes under investigation. As the availability of commercially available antibodies rapidly expands, the application of this system will greatly increase. Chip-based CE separations of multiple analytes from a single sample also provide a significant advantage in the analysis of small samples.     

Chip-based CE for rapid separation of 8-aminopyrene-1,3,6-trisulfonic acid (APTS) derivatized glycans

Fluorescently labeled carbohydrates released from glycoproteins were separated using a commercially available microfluidic chip electrophoresis system. While the instrumentation was primarily designed for DNA analysis it was found that the application base can be easily expanded using the development software provided by the manufacturer. The carbohydrates were released by enzymatic digestion (PNGase F) from glycoproteins present in human plasma after boronic acid - lectin affinity enrichment. After fluorescent labeling with 8-aminopyrene-1,3,6-trisulfonic acid the carbohydrates were separated based on capillary gel electrophoresis mechanism and detected by a fluorescence detector using a blue (470 nm) LED. The separation was completed in 40 s in a microfluidic channel of 14 mm length. Glucose ladder carbohydrate oligomers differing by one glucose unit were baseline separated up to a 20-mer with the main limitation being the detection sensitivity. As expected, the observed resolution in these experiments did not approach that of standard CE with 20 times longer separation distance; however, the chip-based analysis excelled in the speed of the separation. Similar electrophoretic profiles of glycans released from plasma glycoproteins were obtained using a standard CE equipment with 35 cm separation length and microfluidic chips with a separation distance of only 14 mm.     

Rapid microchip-based electrophoretic immunoassays for the detection of swine influenza virus

Towards developing rapid and portable diagnostics for detecting zoonotic diseases, we have developed microchip-based electrophoretic immunoassays for sensitive and rapid detection of viruses. Two types of microchip-based electrophoretic immunoassays were developed. The initial assay used open channel electrophoresis and laser-induced fluorescence detection with a labeled antibody to detect influenza virus. However, this assay did not have adequate sensitivity to detect viruses at relevant concentrations for diagnostic applications. Hence, a novel assay was developed that allows simultaneous concentration and detection of viruses using a microfluidic chip with an integrated nanoporous membrane. The size-exclusion properties of the in situ polymerized polyacrylamide membrane are exploited to simultaneously concentrate viral particles and separate the virus/fluorescent antibody complex from the unbound antibody. The assay is performed in two simple steps--addition of fluorescently labeled antibodies to the sample, followed by concentration of antibody-virus complexes on a porous membrane. Excess antibodies are removed by electrophoresis through the membrane and the complex is then detected downstream of the membrane. This new assay detected inactivated swine influenza virus at a concentration four times lower than that of the open-channel electrophoresis assay. The total assay time, including device regeneration, is six minutes and requires <50 microl of sample. The filtration effect of the polymer membrane eliminates the need for washing, commonly required with surface-based immunoassays, increasing the speed of the assay. This assay is intended to form the core of a portable device for the diagnosis of high-consequence animal pathogens such as foot-and-mouth disease. The electrophoretic immunoassay format is rapid and simple while providing the necessary sensitivity for diagnosis of the illness state. This would allow the development of a portable, cost-effective, on-site diagnostic system for rapid screening of large populations of livestock, including sheep, pigs, cattle, and potentially birds.     

A polydimethylsiloxane/glass capillary electrophoresis microchip for the analysis of biogenic amines using indirect fluorescence detection

A polydimethylsiloxane-glass capillary microchip is fabricated for the rapid analysis of a mixture of common biogenic amines using indirect fluorescence detection. Using a running buffer of phosphate and 2-propanol, and Rhodamine 110 as a background fluorophore, both co-ionic and counter-ionic systems are explored. Studies demonstrate the separation and analysis of cations using indirect fluorescence detection for the first time in a chip-based system. Resulting electrophoretic separations are achieved within a few tens of seconds with detection limits of approximately 6 microM. The reduced sample handling and rapid separations afforded by the coupling of indirect fluorescence detection with chip-based capillary electrophoresis provide a highly efficient method for the analysis and detection of molecules not possessing a chromophore or fluorophore. Furthermore, limits of detection are on a par with reported chip-based protocols that incorporate precolumn derivatisation with fluorescence detection. The current device circumvents lengthy sample preparation stages and therefore provides an attractive alternative technique for the analysis biogenic amines.     

High-power blue/UV light-emitting diodes as excitation sources for sensitive detection

With advances in III-V nitride manufacturing processes, high-power light-emitting diode (LED) chips in the blue and UV wavelengths are now commercially available at reasonable cost and can be used as excitation sources in optical sensing. We describe the use of these high-power blue and UV LEDs for sensitive fluorescence detection, including chip-based flow cytometry, capillary electrophoresis (CE), and single-molecule imaging. By using a blue LED with a focusable power of approximately 40 mW as the excitation source for fluorescent beads, we demonstrate a simple chip-based bead sorter capable of enriching the concentration of green fluorescent beads from 63% to 95%. In CE experiments, we show that a mixture of analyte solution containing 30 nM 6-carboxyrhodamine 6G and 10 nM fluorescein can be separated and detected with excellent signal-to-noise ratio (approximately 17 for 10 nM fluorescein) using the collimated emission from a blue LED; the estimated mass detection limit was approximately 200 zmol for fluorescein. We also demonstrated ultrasensitive fluorescence imaging of single rhodamine 123 molecules and individual lambda-DNA molecules. At a small fraction of the cost of an Ar+ laser, high-power blue and UV LEDs are effective alternatives for lasers and arc lamps in fluorescence applications that demand portability, low cost, and convenience.     

Field amplified stacking injection--capillary electrophoresis for quantitative analysis of released methacrylic acid from dental composites

Field-amplified stacking injection-capillary electrophoresis (FASI-CE) applied for the first time to the study of dental materials is demonstrated in this report. CE was used to separate methacrylic acid from the other degraded components. Due to the background electrolyte being weakly basic and methacrylic acid being negatively charged, in-capillary enrichment of the analyte was achieved by FASI. A detection limit of less than 50 ppb was obtained with good reproducibility (relative standard deviation < 3%). The method was applied to the analysis of four commercially available dental composites. Results showed that FASI-CE was effective in monitoring the fabrication process and product quality of restorative materials fabricated from methacrylate-based composites by analyzing the amount of methacrylic acid released from the residual methacrylate monomers.     

Metal salts as pro- and anti-degradants in polyesters

The effect of a range of commercially available metal salts on the weathering of polyesters is reported. Whilst cobalt and lead have a stabilising influence and iron and zinc a degradative effect on the polyester, the addition of most other metals in a styrene soluble form has little influence on its durability. The addition of lead salts, at concentrations that could be classed, in a formulated system, as being comparable with a low lead paint, affects the thermosetting reaction of the polymer. However, at these concentrations, up to a 30% increase in durability can be achieved by using lead octoate as a stabiliser.     

Detection of specific antibodies using immunosubtraction and capillary electrophoresis instrumentation

Solution-phase immunoassays based on capillary electrophoresis (CE) separations have been shown to be rapid and simple to perform. The potential for sample matrix interference and incompatibility with multiplexing conditions for antibody detection when dealing with real samples, however, has prompted the development of an assay that utilizes an immunosubtraction methodology. A model assay for the detection of specific antibodies that relies on solid-phase extraction, CE and laser-induced fluorescence (LIF) detection is described. The method, called immunocapture-immunosubtraction (ICIS), incorporates an antibody capture/purification protocol using magnetic particles. The detection of specific antibodies is achieved by CE-LIF analysis of a probe solution following incubation with the captured antibodies. As an example of the ICIS assay's capabilities, the relative quantification of anti-fluorescein in serum is presented.     

Drug level monitoring: antidepressants.

The determination of antidepressant drugs which act by blocking neuronal uptake of biogenic amines, because of their widespread use and high toxicity, remains one of the most commonly requested drug assays in clinical laboratories. Easy to use immunoassay reagents for the estimation of these drugs are commercially available. However, immunoassays have not been universally accepted because of high probability of these reagents producing false negative and false positive results. At present, column liquid chromatography with absorbance detection and coupled with solid-phase extraction is the most viable technique for a general procedure for the identification and determination of these drugs. The technique of liquid chromatography is economical, environmental friendly since water-miscible and biodegradable solvents can be used for extraction of drugs and their chromatographic separation, and amenable to full automation. New techniques of separation, such as supercritical fluid chromatography and capillary zone electrophoresis, have not yet been applied for the determination of therapeutic concentrations of antidepressants.     

Divergent dispersion behavior of ssDNA fragments during microchip electrophoresis in pDMA and LPA entangled polymer networks

Resolution of DNA fragments separated by electrophoresis in polymer solutions ("matrices") is determined by both the spacing between peaks and the width of the peaks. Prior research on the development of high-performance separation matrices has been focused primarily on optimizing DNA mobility and matrix selectivity, and gave less attention to peak broadening. Quantitative data are rare for peak broadening in systems in which high electric field strengths are used (>150 V/cm), which is surprising since capillary and microchip-based systems commonly run at these field strengths. Here, we report results for a study of band broadening behavior for ssDNA fragments on a glass microfluidic chip, for electric field strengths up to 320 V/cm. We compare dispersion coefficients obtained in a poly(N,N-dimethylacrylamide) (pDMA) separation matrix that was developed for chip-based DNA sequencing with a commercially available linear polyacrylamide (LPA) matrix commonly used in capillaries. Much larger DNA dispersion coefficients were measured in the LPA matrix as compared to the pDMA matrix, and the dependence of dispersion coefficient on DNA size and electric field strength were found to differ quite starkly in the two matrices. These observations lead us to propose that DNA migration mechanisms differ substantially in our custom pDMA matrix compared to the commercially available LPA matrix. We discuss the implications of these results in terms of developing optimal matrices for specific separation (microchip or capillary) platforms.     

集成化液膜萃取-反萃取-毛细管电泳联用芯片

我们设计并制作了集成有支持液膜萃取-反萃取试样预处理的毛细管电泳(SLMEBE-CCE)微流控芯片. 分别以荧光素钠和丁基罗丹明B作为模型待测物和共存物, 在该芯片上进行了在线试样预处理与毛细管电泳联用的初步实验.     

Measurement of naproxen in human plasma by chip-based immunoaffinity capillary electrophoresis

An electrokinetic immunoassay performed in a chip-based capillary electrophoresis system is described for the rapid measurement of naproxen in human plasma. The system employs a fluorescently labeled antibody to capture and detect the analyte of interest within a 5 min total assay time with an LOD of 0.025 microg/mL and a saturation level of 450 microg/mL. The system compared well with a conventional HPLC technique but was found to be much faster. Application of the electrokinetic assay to the study of patients with allergy to naproxen demonstrated increased concentrations of the drug extending past the predicted elimination half-life. The portability of the system and its ability to process up to 18 samples per hour makes it suitable for use in emergency room situations.     

Quantification of 15-F2t-isoprostane in human plasma and urine: results from enzyme-linked immunoassay and liquid chromatography/tandem mass spectrometry cannot be compared

Quantification of F(2)-isoprostanes is considered a reliable index of the oxidative stress status in vivo. Several immunoassays and chromatography/mass spectrometry-based assays are available for 15-F(2t)-isoprostane quantification. However, it remains unclear if results of immunoassays using different assays can be compared with those of liquid chromatography/mass spectrometry (LC/MS) assays. Previous studies comparing enzyme-linked immunosorbent assay (ELISA) and more specific gas chromatography/mass spectrometry assays have already indicated that ELISAs may overestimate 15-F(2t)-isoprostane concentrations in human plasma. Concentrations of 15-F(2t)-isoprostane in 25 human plasma and urine samples were measured by three commercially available ELISA assays (Assay Designs, Cayman Chemical and Oxford Biomedical Research) and compared with the concentrations measured with a validated, semi-automated high-throughput HPLC tandem mass spectrometry assay (LC/LC-MS/MS). All three ELISAs measured substantially higher 15-F(2t)-isoprostane concentrations (2.1-182.2-fold higher in plasma; 0.4-61.9-fold higher in urine) than LC/LC-MS/MS. Utilization of solid-phase extraction (SPE) columns, especially isoprostane affinity purification columns, brought ELISA isoprostane urine concentrations closer to the LC/LC-MS/MS results. However, SPE did not have much of an effect on ELISA plasma concentrations which remained significantly higher than corresponding LC/LC-MS/MS results. A poor correlation not only between LC/LC-MS/MS and immunoassay results, but also among the immunoassays was found. Especially in plasma, ELISAs grossly overestimate 15-F(2t)-isoprostane concentrations and are not comparable with each other or with LC/LC-MS/MS. It is most disturbing that a sample with relatively high concentrations measured with one ELISA may show low concentrations with another ELISA, and vice versa, potentially affecting the conclusions drawn from such data. The use of specific mass spectrometry-based assays seems advisable.     

An automated electrokinetic continuous sample introduction system for microfluidic chip-based capillary electrophoresis

An automated and continuous sample introduction system for microfluidic chip-based capillary electrophoresis (CE) was developed in this work. An efficient world-to-chip interface for chip-based CE separation was produced by horizontally connecting a Z-shaped fused silica capillary sampling probe to the sample loading channel of a crossed-channel chip. The sample presentation system was composed of an array of bottom-slotted sample vials filled alternately with samples and working electrolyte, horizontally positioned on a programmable linearly moving platform. On moving the array from one vial to the next, and scanning the probe, which was fixed with a platinum electrode on its tip, through the slots of the vials, a series of samples, each followed by a flow of working electrolyte was continuously introduced electrokinetically from the off-chip vials into the sample loading channel of the chip. The performance of the system was demonstrated in the separation and determination of FITC-labeled arginine and phenylalanine with LIF detection, by continuously introducing a train of different samples. Employing 4.5 kV sampling voltage (1000 V cm(-1) field strength) for 30 s and 1.8 kV separation voltage (400 V cm(-1) field strength) for 70 s, throughputs of 36 h(-1) were achieved with <1.0% carryover and 4.6, 3.2 and 4.0% RSD for arginine, FITC and phenylalanine, respectively (n = 11). Net sample consumption was only 240 nL for each sample.     

芯片毛细管电泳激光诱导荧光快速分离检测麻黄碱类兴奋剂

研究用芯片毛细管电泳激光诱导荧光检测系统分离测定经7-chloro-4-n itrobenzo-2-oax-1,3-d iazole(NBD-C l)衍生的麻黄碱和伪麻黄碱的实验条件。采用胶束毛细管电动色谱分离体系(12 mmol/L SDS 10mmol/L硼砂缓冲液,pH 9.0),在45 mm长的通道上实现了麻黄碱和伪麻黄碱的快速分离,一次分离小于1.5m in。10~100 mg/L范围内,峰高与浓度呈良好的线性关系,麻黄碱、伪麻黄碱的检出限分别是0.83 mg/L和1.10 mg/L。所建立的方法应用于尿中麻黄碱和伪麻黄碱的分离测定,取得满意的结果。     

Application of time-resolved fluorescence for imaging-based multisample and multianalyte detection in single microtiter wells

Enzyme-linked immunosorbent assays are routinely used in laboratories around the world and ensure highly specific protein detection. Often, more than one analyte needs to be determined in a single sample and numerous protein arrays for multianalyte detection of a single sample have been developed to address this problem. They have the potential to analyze several dozen or even more analytes in an assay volume of usually around 100 μL. However, due to the presence of numerous different antibodies, these multianalyte sandwich immunoassays suffer from undesired cross-reactivities between the antibodies which lead to a loss of assay specificities. Here, we present an assay principle which allows, e.g., a detection of an analyte in a sample volume of only 1 μL in a normal 96-microtiter well plate, so that up to 100 analytes can be determined from a 100 μL sample volume, but in separate wells. This eliminates antibody cross-reactivities. The assay is based on the biotinylated time-resolved fluorophore EuLH used as a PEG₁₁-dye conjugate in combination with ExtrAvidin® to ensure high signal-to-background ratios. The model protein epidermal growth factor (EGF) was detected with the established sandwich immunoassay and showed assay parameters comparable to commercially available ones. Furthermore, the assay principle enables a spatial resolution of the assay signal. Here, we demonstrated the application of the new detection system for universal imaging-based analysis of individual spots in one single 96-microtiter well by applying it to multisample and also multianalyte detections. In the case of the multisample analysis approach, a considerable reduction of the required sample volume to only 1 μL in a single 96 microtiter well could be achieved.     

Thin-film polymer light emitting diodes as integrated excitation sources for microscale capillary electrophoresis

We report the use of a thin-film polymer light emitting diode as an integrated excitation source for microfabricated capillary electrophoresis. The polyfluorene-based diode has a peak emission wavelength of 488 nm, an active area of 40 microm x 1000 microm and a thickness of similar 2 mm. The simple layer-by-layer deposition procedures used to fabricate the polymer component allow facile integration with planar chip-based systems. To demonstrate the efficacy of the approach, the polyfluorene diode is used as an excitation source for the detection of fluorescent dyes separated on-chip by electrophoresis. Using a conventional confocal detection system the integrated pLED is successfully used to detect fluorescein and 5-carboxyfluorescein at concentrations as low as 10(-6) M with a mass detection limit of 50 femtomoles. The drive voltages required to generate sufficient emission from the polymer diode device are as low as 3.7 V.     

An improved design to capture magnetic microparticles for capillary electrophoresis based immobilized microenzyme reactors

In this paper, we demonstrate the effectiveness of a new 3D printed magnet holder that enables capture of magnetic microparticles in commercially available capillary electrophoresis equipment with a liquid or air based coolant system. The design as well as the method to capture magnetic microparticles inside the capillary are discussed. This setup was tested at temperature and pH values suitable for performing enzymatic reactions. To demonstrate its applicability in CE‐ immobilized microenzyme reactors (IMER) development, human flavin‐containing monooxygenase 3 and bovine serum albumin were immobilized on amino functionalized magnetic microparticles using glutaraldehyde. These microparticles were subsequently used to perform in‐line capillary electrophoresis with clozapine as a model substrate. This setup could be used further to establish CE‐IMERs of other drug metabolic enzymes in a commercially available liquid based capillary coolant system. The CE‐IMER setup was successful, although a subsequent decrease in enzyme activity was observed on repeated runs.