M(bpy)_3~(2 )(M=Fe,Ru,Os)电子结构与相关性质

报导了对配合物M(bpy)2 M=Fe,Ru,Os)的量子化学密度泛函(DFT)法研究的结果.在B3LYP/LanL2DZ方法与基组的水平上进行计算 ,探讨M(bpy)32 的电子结构特征及相关性质 ,特别是中心原子对配合物的配位键长、光谱性质、电荷布居及化学稳定性等的影响规律 ,为该类配合物的合成 ,为分析光、电、催化作用机理提供理论参考.     

M(bpy)2+3(M=Fe,Ru,Os)电子结构与相关性质

报导了对配合物Ｍ（ｂｐｙ）＾２＋３（Ｍ＝Ｆｅ,Ｒｕ,Ｏｓ）的量子化学密度泛函法研究的结果。Ｂ３ＬＹＰ／ＬａｎＬ２ＤＺ方法与基组的水平上进行计算,探讨Ｍ（ｂｐｙ）＾２＋３电子结构特征及相关性质,特别是中心原子对配合物的配位键长、光谱性质,电荷布局及化学稳定性等的影响规律,为该类配合物的合成,为分析光、电、催化作用机理提供理论参考。     

含联吡啶和二硫醇盐配体过渡金属M(Ⅱ)(M=Ni,Pd,Pt)配合物二阶NLO性质的DFT研究

采用密度泛函理论B3LYP方法,对含联吡啶和二硫醇盐配体过渡金属M(Ⅱ)(M=Ni,Pd,Pt)配合物的几何构型进行优化,在获得稳定构型的基础上,结合有限场方法(FF)研究了这些分子的二阶非线性光学(NLO)性质.结果表明:在所研究的9个分子中,当配位体相同的情况下,含Pt (Ⅱ)配合物具有最稳定的基态结构(c3)和最大的NLO系数βtot(b3).进一步研究证明,前线分子轨道能量差较小以及HOMO轨道中共轭原子离域范围较大是配合物b3的βtot值最大的原因.     

手性配合物[M(bipy)_3]~(2+)(M=Fe,Ru,Os)圆二色谱的理论解析

应用密度泛函理论,在DFT/B3LYP/LanL2DZ水平上优化了铁族配合物[M(bipy)3]2+(M=Fe,Ru,Os;bipy=2,2′-联吡啶)在溶液中的基态几何结构,并用TDDFT/B3LYP方法和相同的基组计算了该类配合物的激发能、旋转强度和振子强度,绘制了相应的圆二色谱.计算的谱带位置虽有一定的红移或蓝移,但各谱带的带形和符号均与实验谱吻合.对跃迁性质的分析表明,三个配合物在长波区,除[Fe(bipy)3]2+的第一个谱带是以d-d跃迁为主外,其他谱带均是荷移跃迁为主.短波区的两个强带则是以π-π*跃迁为主的激子耦合带:对于铁配合物,TDDFT可以正确预言其正负带的强度比,但对钌和锇配合物而言,由于对激子跃迁中荷移成份的贡献估计不足,计算的比值偏小.这一结论为进一步改进有关的计算模型指明了方向.     

Ru(bpy)32+配合物及bpy上双取代基效应的DFT法研究

报道Ru(bpy)32+配合物取代基效应的量子化学密度泛函(DFT)法研究的结果。探讨Ru(bpy)32+的三个配体bpy(2,2′-联二吡啶)被取代基(-NH2,-OH,-NO2)对位双取代后对配合物电子结构及相关性质,如配位键长、光谱性质等的影响规律,为该类配合物的合成及性质分析提供理论参考。     

碘·(N,N''-联吡啶)·(三苯基膦)合铜(Ⅰ)的合成和晶体结构

铜(I)配合物的研究在金属酶的化学模拟和配合物结构及反应性能等研究方面具有重要的理论和实际意义[1].但由于铜(I)配合物不稳定, 且在多数有机溶剂中的溶解度较小,铜(I)配合物的合成比较困难.我们在铜(I)配合物的合成方面积累了一些经验,合成了一系列含有三苯基膦和氮杂环配体的铜(I)配合物[CuX(PPh3)L]n[2～4] (n=1, X=I, L=1,10-phen; n=2, X=Br, I, L=C9H7N),并对它们的结构进行了研究.本文报道一个类似的新配合物[CuI(PPh3)(bpy)](I)的合成和晶体结构, 并把它与其它几个类似的配合物进行了对比.     

配合物EuxM1-x(TTA)3(H2O)2(M=La,Gd)光致发光特性

合成了一系列组成为EuxM1－x(TTA)3(H2O)2(M=La,Gd)的固体配合物,利用红外光谱和荧光光谱研究了配合物结构和发光性质随Eu3＋浓度的变化规律.红外光谱的结果表明,配合物的成份为Eu(TTA)3(H2O)2和M(TTA)3(H2O)2,没有新化合物生成.而荧光光谱的结果显示配合物的发光强度与Eu3＋浓度不成线性关系,其中不发光的M(TTA)3组分对发光有增益作用.对其可能的发光机制进行了探讨.     

2,2-联吡啶-1,1-二氧化物与Mn(Ⅱ)的三聚体配合物的合成及性能

Mn(Ⅱ)能与许多氮氧化合物形成配合物,Wilde对Mn(Ⅱ)与2,2-联吡啶及1,1-二氮杂菲的均配配合物作过详细研究[1,2];Mn(Ⅱ)与2,2-联吡啶-1,1-二氧化物(bipyO2)的配合物也有综述[3]. Mn(Ⅱ)与bipyO2的配合物大多是以ClO-4、NO-3、[PtCl4]2-为阴离子,少数是卤离子. 它们均形成配位体数目为3的单核螯合物,这些配合物是在水或乙醇中合成的. Mn(Ⅱ)与bipyO2的多核聚合物还未见报道. 本文用DMF为溶剂,以无水MnCl2和2,2-联吡啶-1,1-二氧化物为原料,合成了Mn(Ⅱ)与bipyO2的三聚体配合物. 测定了其组成,并发现该配合物对较高浓度的氨气有很好的敏感性和选择性.     

2,2’-联吡啶-1,1’-二氧化物与Mn(Ⅱ)的三聚体配合物的合成及性能

Mn( )能与许多氮氧化合物形成配合物 ,Wilde对 Mn( )与 2 ,2 -联吡啶及 1 ,1 -二氮杂菲的均配配合物作过详细研究 [1,2 ] ;Mn( )与 2 ,2 -联吡啶 - 1 ,1 -二氧化物 ( bipy O2 )的配合物也有综述 [3] .Mn( )与 bipy O2 的配合物大多是以 Cl O- 4、NO- 3、[Pt Cl4 ]2 -为阴离子 ,少数是卤离子 .它们均形成配位体数目为 3的单核螯合物 ,这些配合物是在水或乙醇中合成的 .Mn( )与 bipy O2 的多核聚合物还未见报道 .本文用 DMF为溶剂 ,以无水 Mn Cl2 和 2 ,2 -联吡啶 - 1 ,1 -二氧化物为原料 ,合成了 Mn( )与bipy O2 的三聚…     

系列二亚胺Os(II)配合物[Os(L)2(CN)2(phen)] (L＝PH3, DMSO; phen＝1,10-邻二氮杂菲)及[Os(PH3)2(phen)Br2]电子结构和 光谱性质的理论研究

采用自旋限制和非限制B3LYP/UB3LYP方法分别优化了系列Os(II)二亚胺配合物[Os(L)2(CN)2(phen)] [phen＝1,10-邻二氮杂菲; L＝Ph3 (1), 二甲基亚砜(DMSO) (2)]及[Os(PH3)2(phen)Br2] (3)的基态和激发态几何构型. 通过TD-DFT方法结合PCM溶剂化模型计算了配合物1～3在二氯甲烷溶液中的吸收和发射光谱并指认了相应的跃迁性质. 通过理论化学计算, 揭示了π酸配体及π碱配体对配合物磷光发射性质的影响及原因. 并进一步解释了配合物3易于在Os—Br键处断裂而发生反应的量子化学机理. 对配合物在不同溶剂中的磷光发射性质的计算表明, 溶剂对配合物的量子产率存在着影响并且配合物具有溶剂化显色效应.     

Darstellung und Eigenschaften von Komplexen des Typs cis-(RCN)3M(CO)3 (M = Cr,M, W)

Metal complexes of the type cis-(RCN)₃M(CO)₃ (M = Cr, Mo, W) have been prepared by different methods starting with M(CO)₆ or, more conveniently, with substituted derivatives of the metal hexacarbonyls. Infrared spectroscopic studies indicate that the strength of the nitrile-to-metal bond in cis-(RCN)₃M(CO)₃ is only sligthly influenced by the R group. The chromium compounds cis-(RCN)₃Cr(CO)₃ may be used as starting materials for the preparation of hexaalkylborazine-chromium-tricarbonyls.     

噻吩在M(111)(M=Pd,Pt, Au)表面的吸附

采用密度泛函理论(DFT), 选取DMol³程序模块, 对噻吩在M(111) (M=Pd, Pt, Au)表面上的吸附行为进行了探讨. 通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken 电荷布居、差分电荷密度以及态密度的分析发现, 噻吩在Pd(111)面上的吸附能最大, Pt(111)面次之, Au(111)面最小. 吸附后, 噻吩在Au(111)面上的构型几乎保持不变, 最终通过S端倾斜吸附于top 位; 噻吩在Pd(111)及Pt(111)面上发生了折叠与变形, 环中氢原子向上翘起, 最终通过环平面平行吸附于hollow 位. 此外, 噻吩环吸附后芳香性遭到了破坏, 环中碳原子发生sp³杂化, 同时电子逐渐由噻吩向M(111)面发生转移, M(111)面上的部分电子也反馈给了噻吩环中的空轨道, 这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

Coordination-position isomeric M(II)Cu(II) and Cu(II)M(II) (M = Co, Ni, Zn) complexes derived from macrocyclic compartmental ligands

The dinucleating macrocyclic ligands (L(2;2))(2-) and (L(2;3))(2-), comprised of two 2-[(N-methylamino)methyl]-6-(iminomethyl)-4-bromophenolate entities combined by the -(CH(2))(2)- chain between the two aminic nitrogen atoms and by the -(CH(2))(2)- or -(CH(2))(3)- chain between the two iminic nitrogen atoms, have afforded the following M(II)Cu(II) complexes: [CoCu(L(2;2))](ClO(4))(2).MeCN (1A), [NiCu(L(2;2))](ClO(4))(2) (2A), [ZnCu(L(2;2))](ClO(4))(2).0.5MeCN.EtOH (3A), [CoCu(L(2;3))(MeCN)(2-PrOH)](ClO(4))(2) (4A), [NiCu(L(2;3))](ClO(4))(2) (5A), and [ZnCu(L(2;3))](ClO(4))(2).1.5DMF (6A). [CoCu(L(2;2))(MeCN)(3)](ClO(4))(2) (1A') crystallizes in the monoclinic space group P2(1)/n, a = 11.691(2) A, b = 18.572(3) A, c = 17.058(3) A, beta= 91.18(2) degrees, V = 3703(1) A(3), and Z = 4. [NiCu(L(2;2))(DMF)(2)](ClO(4))(2) (2A') crystallizes in the triclinic space group P(-)1, a = 11.260(2) A, b = 16.359(6) A, c = 10.853(4) A, alpha= 96.98(3) degrees, beta= 91.18(2) degrees, gamma= 75.20(2) degrees, V = 1917(1) A(3), and Z = 2. 4A crystallizes in the monoclinic space group P2(1)/c, a = 15.064(8) A, b = 11.434(5) A, c = 21.352(5) A, beta= 95.83(2)degrees, V = 3659(2) A(3), and Z = 4. The X-ray crystallographic results demonstrate the M(II) to reside in the N(amine)(2)O(2) site and the Cu(II) in the N(imine)(2)O(2) site. The complexes 1-6 are regarded to be isomeric with [CuCo(L(2;2)))](ClO(4))(2).DMF (1B), [CuNi(L(2;2)))](ClO(4))(2).DMF.MeOH (2B), [CuZn(L(2;2)))](ClO(4))(2).H(2)O (3B)), [CuCo(L(2;3)))](ClO(4))(2).2H(2)O (4B), [CuNi(L(2;3)))](ClO(4))(2) (5B), and [CuZn(L(2;3)))](ClO(4))(2).H(2)O (6B) reported previously, when we ignore exogenous donating and solvating molecules. The isomeric M(II)Cu(II) and Cu(II)M(II) complexes are differentiated by X-ray structural, magnetic, visible spectroscopic, and electrochemical studies. The two isomeric forms are significantly stabilized by the "macrocyclic effect" of the ligands, but 1A is converted into 1B on an electrode, and 2A is converted into 2B at elevated temperature.     

噻吩在M(111)(M=Pd,Pt,Au)表面的吸附(英文)

采用密度泛函理论(DFT),选取DMol3程序模块,对噻吩在M(111)(M=Pd,Pt,Au)表面上的吸附行为进行了探讨.通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken电荷布居、差分电荷密度以及态密度的分析发现,噻吩在Pd(111)面上的吸附能最大,Pt(111)面次之,Au(111)面最小.吸附后,噻吩在Au(111)面上的构型几乎保持不变,最终通过S端倾斜吸附于top位;噻吩在Pd(111)及Pt(111)面上发生了折叠与变形,环中氢原子向上翘起,最终通过环平面平行吸附于hollow位.此外,噻吩环吸附后芳香性遭到了破坏,环中碳原子发生sp3杂化,同时电子逐渐由噻吩向M(111)面发生转移,M(111)面上的部分电子也反馈给了噻吩环中的空轨道,这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

M(R-dmet)2] bis(1,2-dithiolenes): a promising new class intermediate between [M(dmit)2] and [M(R,R'-timdt)2] (M = Ni, Pd, Pt)

We report the first examples of metal dithiolenes belonging to the class [M(R-dmet)(2)] [R-dmet = formally monoreduced N-substituted thiazolidine-2,4,5-trithione; R = Et, M = Ni (1), Pd (2), Pt (3)]. A comparative spectroscopic, electrochemical, and density functional theory theoretical investigation indicates that [M(R-dmet)(2)] complexes show features intermediate between those of the dithiolenes belonging to the previously reported classes [M(R,R'-timdt)(2)] and [M(dmit)(2)] (R,R'-timdt = formally monoreduced N,N'-disubstituted imidazolidine-2,4,5-trithione; dmit = 2-thioxo-1,3-dithiole-4,5-dithiolato). UV-vis-near-IR spectroscopy and cyclic voltammetry/differential pulsed voltammetry measurements performed on 1 and 3 proved that the new dithiolenes are stable as neutral, monoanionic, and bianionic species and feature a near-IR electrochromic absorption falling at about 1000 and 1250 nm for neutral and monoanionic species, respectively.     

Thermodynamics, kinetics, and mechanism of (silox)3M(olefin) to (silox)3M(alkylidene) rearrangements (silox = tBu3SiO; M = Nb, Ta)

Olefin complexes (silox)(3)M(ole) (silox = (t)Bu(3)SiO; M = Nb (1-ole), Ta (2-ole); ole = C(2)H(4), C(2)H(3)Me, C(2)H(3)Et, C(2)H(3)C(6)H(4)-p-X (X = OMe, H, CF(3)), C(2)H(3)(t)Bu, (c)C(5)H(8), (c)C(6)H(10), (c)C(7)H(10) (norbornene)) rearrange to alkylidene isomers (silox)(3)M(alk) (M = Nb (1=alk), Ta (2=alk); alk = CHMe, CHEt, CH(n)Pr, CHCH(2)C(6)H(4)-p-X (X = OMe, H, CF(3) (Ta only)), CHCH(2)(t)Bu, (c)C(5)H(8), (c)C(6)H(10), (c)C(7)H(10) (norbornylidene)). Kinetics and labeling experiments suggest that the rearrangement proceeds via a delta-abstraction on a silox CH bond by the beta-olefin carbon to give (silox)(2)RM(kappa(2)-O,C-OSi(t)Bu(2)CMe(2)CH(2)) (M = Nb (4-R), Ta (6-R); R = Me, Et, (n)Pr, (n)Bu, CH(2)CH(2)C(6)H(4)-p-X (X = OMe, H, CF(3) (Ta only)), CH(2)CH(2)(t)Bu, (c)C(5)H(9), (c)C(6)H(11), (c)C(7)H(11) (norbornyl)). A subsequent alpha-abstraction by the cylometalated "arm" of the intermediate on an alpha-CH bond of R generates the alkylidene 1=alk or 2=alk. Equilibrations of 1-ole with ole' to give 1-ole' and ole, and relevant calculations on 1-ole and 2-ole, permit interpretation of all relative ground and transition state energies for the complexes of either metal.     

Interstitial Hydrides in Nanoclusters can Reduce M(I) (M=Cu,Ag, Au) to M(0) and Form Stable Superatoms

High-nuclearity clusters resemble the closest model between the determination of atomically precise chemical species and the bulk metallic version thereof, and both impacts on a variety of applications, including catalysis, optics, sensors, and new energy sources. Our interest lies with the nanoclusters of the Group 11 (Cu, Ag, Au) metals stabilized by dichalcogenido and hydrido ligands. Herein, we describe superatoms formed by the clusters and their relationship with precursor hydrido clusters. Specifically, our concept seeks to demonstrate a possible correlation that exist between hydrido clusters (and nanoalloys) and the formation of superatoms, with the loss of hydrides and typically with release of H₂ gas. These reactions appear to be internal self-redox reactions and require no additional reducing agent, but does seem to require a similar core structure. Knowledge of such processes could provide insight into how clusters grow and an understanding in bridging the atomically precise cluster – metal nanoparticle mechanism.     

Cyano-bridged Mn(III)3M(III) (M(III) = Fe, Cr) complexes: synthesis, structure, and magnetic properties

Two cyano-bridged tetranuclear complexes composed of Mn(III) salen (salen = N,N'-ethylene bis(salicylideneiminate)) and hexacyanometalate(III) (M = Fe, Cr) in a stoichiometry of 3:1 have been selectively synthesized using {NH2(n-C12H25)2}3[M(III)(CN)6] (M(III) = Fe, Cr) starting materials: [{Mn(salen)(EtOH)}3{M(CN)6}] (M = Fe, 1; Cr, 2). Compounds 1 and 2 are isostructural with a T-shaped structure, in which [M(CN)6]3- assumes a meridional-tridentate building block to bind three [Mn(salen)(EtOH)]+ units. The strong frequency dependence and observation of hysteresis on the field dependence of the magnetization indicate that 1 is a single-molecule magnet.