Copolymer of lactide and ε-caprolactone catalyzed by bimetallic Schiff base aluminum complexes

A series of copolymers of lactide(LA) and e-caprolactone(ε-CL) with different monomer feed ratios were achieved using three kinds of bimetallic Schiff aluminum complexes as catalysts. The ratios of LA and ε-CL units in different copolymers and the average segments length were determined by NMR analysis. The comparative kinetic study of L-LA/ε-CL and rac-LA/ε-CL copolymerization systems showed that the polymerization rate of LA was faster than ε-CL, and L-LA showed polymerization rate slightly faster than rac-LA. It was inferred that the copolymers achieved by these complexes were gradient copolymers with gradual change in distribution of LA and e-CL units. The thermal properties of these copolymers were characterized by DSC analysis, which showed that the glass transition temperature(Tg) of these copolymers changed regularly according to the pro-portion change of two structural units.     

STUDY ON THE EFFECT OF POLYSTYRENE SULFONIC ACID MACROMOLECULES ON THE POLYMERIZATION OF ACRYLAMIDE

The effect of polystyrene sulfonic acid (PSSA) macromolecules on the polymerization of acrylamide (AM) has been studied. It was found that the rates of polymerization of AM were greatly increased in the presence of PSSA in the polymerization system.The maximum value of the rate of polymerization of AM was obtained when the ratio of [—SO_3H]: [AM] reached 3:1. When the insoluble crosslinked PSSA was used instead of the soluble one, this effect decreased considerably. The interaction between molecules of PSSA and AM was determined by infrared spectroscopy, elementary analysis and X-ray photoelectron spectroscopy. The combination form, —SO_3-NH_3~ CO—, formed between sulfonic group and amide group was found to be existed since the infrared absorption band of —NH_2 shifted from 3400cm~(-1) to 3150 cm~(-1), the binding energy of electron N_(18) changed from 399.7 eV to 401.3 eV, and the atomic ratio of N to S of the products was similar to the ratio of reagents. Based on these experimental results, the mechanism of AM polymerization in the presence of PSSA is proposed. The initial step is the combination of AM with sulfonic group to form —CONH_3~ , then followed by polymerization on the PSSA macromolecule. The role of PSSA on the polymerization of AM is discussed.     

Polymerization Kinetics of Propylene with the MgCl_2-Supported Ziegler-Natta Catalysts——Active Centers with Different Tacticity and Fragmentation of the Catalyst

The catalytic activity and stereospecificity of olefin polymerization by using heterogeneous TiCl_4/MgCl_2 Ziegler-Natta(Z-N) catalysts are determined by the structure and nature of active centers, which are mysterious and fairly controversial. In this work, the propylene polymerization kinetics under different polymerization temperatures by using Z-N catalysts were investigated through monitoring the concentration of active centers [C*] with different tacticity. SEM was applied to characterize the catalyst morphologies and growing polypropylene(PP) particles. The lamellar thickness and crystallizability of PP obtained under different polymerization conditions were analyzed by DSC and SAXS. The PP fractions and active centers with different tacticity were obtained with solvent extraction fractionation method. The catalytic activity, active centers with different tacticity and propagation rate constant k_p, fragmentation of the catalyst, crystalline structure of PP are correlated with temperature and time for propylene polymerizations. The polymerization temperature and time show complex influences on the propylene polymerization. The higher polymerization temperature(60 ℃) resulted higher activity, k_p and lower [C*], and the isotactic active centers C_i* as the majority ones producing the highest isotactic polypropylene(iPP) components showed much higher k_p when compared with the active centers with lower stereoselectivity. Appropriate polymerization time provided full fragmentation of the catalyst and minimum diffusion limitation. This work aims to elucidate the formation and evolution of active centers with different tacticity under different polymerization temperature and time and its relations with the fragmentation of the PP/catalyst particles, and provide the solutions to the improvement of catalyst activity and isotacticity of PP.     

POLYMER-SUPPORTED RARE EARTH CATALYSTS FOR STYRENE POLYMERIZATION

The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10~(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.     

RING-OPENING POLYMERIZATION OF ε-CAPROLACTONE BY LANTHANOCENE CATALYSIS*

Ring-opening polymerization of ε-caprolactone (CL) catalyzed bylanthanocenes, O(C_2H_4C_5H_3CH_3)_2YCl (Cat-YCl) and Me_2Si[(CH_3)_3SiC_5H_3]_2NdCl(Cat-NdCl) has been carried out for the first time. It has been found that both yttroceneand neodymocene are very efficient to catalyze the polymerization of CL, giving high molec-ular weight poly (ε-caprolactone) (PCL ). The effects of [cat] / [ε- CL] molar ratio, polymeriza-tion temperature and time, as well as solvents were investigated and polymerization tem-perature is found to be the most important factor affecting the polymerization. The bulkpolymerization gives higher molecular weight PCL and higher conversion than that in solu-tion polymerization. NaBPh_4 was found to promote the polymerization of ε-caprolactone,and thus to increase both the polymerization conversion and MW of poly (ε- caprolactone ).     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

“LIVING”/CONTROLLED RADICAL POLYMERIZATION OF ETHYL METHYLACRYLATE WITH 2,2’-AZOBISISOBUTYRONITRILE/FERRIC CHLORIDE/TRIPHENYLPHOSPHINE INITIATION SYSTEM

"Living"/controlled radical polymerization of ethyl methacrylate (EMA) was carried out with a 2,2'-azobisisobutyronitrile (AIBN)/ferric chloride (FeCl_3)/triphenylphosphine (PPh_3) initiation system at 85℃. Thc numberaverage molecular weight (M_n) increases linearly with monomer conversion and the rate of polymerization is first order withrespect to monomer concentration. The M_w of PEMA ranges from 3900 to 17600 and the polydispersity indices are quitenarrow (1.09～1.22). The conversion can reach up to～100% and M_w of the polymers obtained is close to that designed. Thepolymerization mechanism belongs to the reverse atom transfer radical polymerization (ATRP). The polymer was end-functionalized by chlorine atom, which acts as a macroinitiator to proceed extension polymerization in the presence ofCuBr/bipy catalyst system via an ATRP process. The presence of ω-chlorine in the PEMA obtained was identified by ~1H-NMR spectrum.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

KINETICS OF SUSPENDED EMULSION POLYMERIZATION OF METHYL METHACRYLATE

The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of MMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (Rp0) and steady-state polymerization rate (Rp) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: Rp0 ∝ [I]0.73[S]0.32 and Rp ∝ [I]0.71[S]0.23. The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.     

INVESTIGATION OF THE ATRP OF n-BUTYL METHACRYLATE USING THE Cu（I）／N,N,N＇ N＂ N＂-PENTAMETHYLDIETHYLENETRIAMINE CATALYST SYSTEM

The polymerization of n-butyl methacrylate was investigated using the Atom Transfer Radical Polymerization technique with CuBr and CuCl/N,N,N‘,N“,N“-pentamethyldiethylenetriamine catalytic systems. Various combinations of catalyst systems and initiators were utilized in order to optimize the polymerization conditions and to obtain well-defined polymers (i.e. controlled molecular weights and low polydispersities). It has been found that the optimal initiator for this system is a chlorine-based initiator, when the catalyst used is a Cu(I) salt in conjunction with the N,N,N‘,N“,N“-pentamethyldiethylenetriamine ligand. Bromine-based initiators tend to result in large amounts of initial termination, leading to polymers with less than ideal chain end functionality, even if CuCI is used as the Cu(I) species to invoke the halogen exchange. Additionally, the effects of the polymerization temperature, copper(I) species and the initiator structure were determined.     

Improving the Ring‐opening Polymerization of l‐Lactide Using n‐Butyl Lithium with Various Bidentate Ligands

A series of bidentate ligands were examined to improve the catalytic activity of l ‐lactide (LA) polymerization by using n‐butyl lithium and BnOH. For LA polymerization, n‐butyl lithium with tetraisopropyl methylenebis(phosphonate) (L⁸ ) showed the greatest catalytic activity but with poor controllability of the polymer molecular weight. The polydispersity indices (PDIs) could be improved without BnOH addition, but Mn _GPC was much different from the Mn _Cal . ¹H NMR spectra confirmed that the cyclized PLA was obtained, thus implying that active chain‐end mechanisms were operative in LA polymerization.     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

ɛ‐caprolactone and lactide polymerization promoted by an ionic titanium(IV)/iron(III) polynuclear halo‐alkoxide

The ionic [Ti₃(µ₃‐OPrⁱ)₂(µ‐OPrⁱ)₃(OPrⁱ)₆][FeCl₄] halo‐alkoxide ( A ) was investigated for its activity towards the bulk polymerization of rac‐lactide (rac‐LA) and ?‐caprolactone (?‐CL) in various temperatures, monomer/ A molar proportions, and reaction times. The reactivity of A in the ring‐opening polymerization (ROP) of both monomers is mainly due to the cationic [Ti₃(OPrⁱ)₁₁]⁺ unity and proceeds through the coordination–insertion mechanism. Molecular weights ranging from 6,379 to 13,950 g mol^?1 and PDI values varying from 1.22 to 1.52 were obtained. Results of ROP kinetic studies for both ?‐CL and rac‐LA confirm that the reaction rates are first‐order with respect to monomers. The production of poly(?‐caprolactone) shows a higher sensitivity of the reaction rate to temperature, while the polymerization of rac‐LA is slower and more dependent on the thermal stability of the active species during the propagation step. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2509–2517     

Controlled surface‐initiated ring‐opening polymerization of L‐lactide from risedronate‐anchored hydroxyapatite nanocrystals: Novel synthesis of biodegradable hydroxyapatite/poly(L‐lactide) nanocomposites

Risedronate‐anchored hydroxyapatite (HA‐RIS) nanocrystals were prepared with 4.1 wt % RIS and used for controlled surface‐initiated ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA). The strong adsorption of RIS to HA surface not only led to enhanced dispersion of HA nanocrystals in water as well as in organic solvents but also provided alkanol groups as active initiating species for ROP of L ‐LA. HA‐RIS was characterized by thermogravimetric analysis, dynamic light scattering, ¹H NMR, Fourier transform infrared spectrometer, and X‐ray diffraction. The graft polymerization of L ‐LA onto HA‐RIS took place smoothly in the presence of stannous octoate in toluene at 120 °C, resulting in HA/poly(L ‐LA) nanocomposites with high yields of 85–90% and high poly(L ‐LA) contents of up to 97.5 wt %. Notably, differential scanning calorimetry measurements revealed that the poly(L ‐LA) in HA/poly(L ‐LA) nanocomposites exhibited considerably higher melting temperatures (T_m = 173.3?178.1 °C) and higher degrees of crystallinity (X_c = 41.0?43.1%) as compared to poly(L ‐LA) homopolymer (T_m = 168.5 °C, X_c =25.7%). In addition, our initial results showed that these HA/poly(L ‐LA) nanocomposites could readily be electrospun into porous matrices. This study presented a novel and controlled synthetic strategy to HA/RIS/poly(L ‐LA) nanocomposites that are promising for orthopedic applications as well as for bone tissue engineering. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ring‐opening polymerization and block copolymerization of L‐lactide with divalent samarocene complex

Divalent samarocene complex [(C₅H₉C₅H₄)₂Sm(tetrahydrofuran)₂] was prepared and characterized and used to catalyze the ring‐opening polymerization of L ‐lactide (L‐LA) and copolymerization of L‐LA with caprolactone (CL). Several factors affecting monomer conversion and molecular weight of polymer, such as polymerization time, temperature, monomer/catalyst ratio, and solvent, were examined. The results indicated that polymerization was rapid, with monomer conversions reaching 100% within 1 h, and the conformation of L‐LA was retained. The structure of the block copolymer of CL/L‐LA was characterized by NMR and differential scanning calorimetry. The morphological changes during crystallization of poly(caprolactone) (PCL)‐b‐P(L‐LA) copolymer were monitored with real‐time hot‐stage atomic force microscopy (AFM). The effect of temperature on the morphological change and crystallization behavior of PCL‐b‐P(L‐LA) copolymer was demonstrated through AFM observation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2667–2675, 2003     

New aliphatic poly(ester‐carbonates) based on 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one

The synthesis, characterization, and ring‐opening polymerization of a new cyclic carbonate monomer containing an allyl ester moiety, 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC), was performed for the first time. MAC was synthesized in five steps in good yield beginning from the starting material, 2,2‐bis(hydroxymethyl)propionic acid. Subsequent polymerization and copolymerizations of the new cyclic carbonate with rac‐lactide (rac‐LA) and ?‐caprolactone (CL) were attempted. Rac‐LA copolymerized well with MAC, but CL copolymerizations produced insoluble products. Oligomeric macroinitiators of MAC and rac‐LA were synthesized from stannous ethoxide, and both macroinitiators were used for the controlled ring‐opening polymerization of rac‐LA. The polymerization kinetics were examined by monitoring the disappearance of the characteristic C? O ring stretch of the monomer at 1240 cm^?1 with real‐time in situ Fourier transform infrared spectroscopy. Postpolymerization oxidation reactions were conducted to epoxidize the unsaturated bonds of the MAC‐functionalized polymers. Epoxide‐containing polymers may allow further organic transformations with various nucleophiles, such as amines, alcohols, and carboxylic acids. NMR was used for microstructure identification of the polymers, and size exclusion chromatography and differential scanning calorimetry were used to characterize the new functionalized poly(ester‐carbonates). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1978–1991, 2003     

Controllable synthesis of bio‐based polylactide diols using an organocatalyst in solvent‐free conditions

Controllable synthesis of bio‐based polylactide (PLA) diols was realized by the ring‐opening polymerization (ROP) of lactide (LA) in the presence of 1,4‐butanediol (BDO) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as an organocatalyst in solvent‐free conditions. The catalytic activity and conversion of LA could reach ∼1 kg g⁻¹ DBU and >97%, respectively, and the polymerization yielded polymers with narrow polydispersity index (PDI) (1.15–1.29). Interestingly, the number average molecular weight (M_n) of the obtained PLA diol was in excellent linear relation with the molar ratio of LA and BDO, and hence can be precisely controlled. The structure of the diol was clearly confirmed by ¹H and ¹³C NMR, FTIR, and MALDI‐TOF mass spectra, proving BDO as an initiation‐transfer agent to participate in the polymerization. Kinetic study of the ROP demonstrates a pseudo‐first‐order kinetic model and a controlled “living” nature. Notably, it is found that the glass transition temperature (T_g) of the diol significantly depends on the M_n. Furthermore, various chain transfer agents and organocatalysts can also be used to successfully synthesize well‐defined PLA diols. Especially, functional bio‐based dihydric alcohols such as 2,5‐furandimethanol (FDMO)‐initiated ROP in this system could result in fully bio‐based PLA diols with functionality. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 968–976     

Cubane‐Type Polynuclear Zinc Complexes Containing Tridentate Schiff Base Ligands: Synthesis,Characterization, and Ring‐Opening Polymerization Studies of rac‐Lactide and ε‐Caprolactone

New polynuclear zinc complexes containing tridentate Schiff base ligands were successfully synthesized and fully characterized. The solid‐state structure of the complexes was determined using single crystal X‐ray diffraction. The complexes display a tetranuclear cubane‐like core structure [Zn₄O₄] and sowed good catalytic activity towards the ring‐opening polymerization (ROP ) of rac‐lactide (rac‐LA ) and ε‐caprolactone (ε‐CL ) under solvent‐free conditions. The polylactic acid (PLA ) obtained from rac‐LA showed isotactic enrichment, as proved by homonuclear decoupled ¹H‐NMR analysis. These complexes also showed good activity and superior control towards the ROP of rac‐LA and ε‐CL in the presence of benzyl alcohol as a co‐initiator. Furthermore, kinetic studies demonstrated that the ROP of rac‐LA and ε‐CL has a first order dependence on both monomer (rac‐LA and ε‐CL ) and catalyst concentration.     

Tridentate anilido‐aldimine magnesium and zinc complexes as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and L‐lactide

A novel tridentate anilido‐aldimine ligand, [o‐C₆H₄(NHAr)? HC?NCH₂CH₂NMe₂] (Ar = 2,6‐ⁱPr₂C₆H₃, L ‐H, 1 ), has been prepared by the condensation of N, N‐dimethylethylenediamine with one molar equivalent of 2‐fluoro‐benzaldehyde in hexane, followed by the addition of the lithium salt of diisopropylaniline in THF. Magnesium (Mg) and zinc (Zn) complexes supported by the tridentate anilido‐aldimine ligand have been synthesized and structurally characterized. Reaction of L ‐H ( 1 ) with an equivalent amount of MgⁿBu₂ or ZnEt₂ produces the monomeric complex [ L MgⁿBu] ( 2 ) or [ L ZnEt] ( 3 ), respectively. Experimental results show that complexes 2 and 3 are efficient catalysts for ring‐opening polymerization of ε‐caprolactone (CL) and L ‐lactide (LA) in the presence of benzyl alcohol and catalyze the polymerization of ε‐CL and L ‐LA in a controlled fashion yielding polymers with a narrow polydispersity index. In both polymerizations, the activity of Mg complex 2 is higher than that of Zn complex 3 , which is probably due to the higher Lewis acidity and better oxophilic nature of Mg²⁺ metal. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4927–4936, 2009     

Exploration of tertiary aminosquaramide bifunctional organocatalyst in controlled/living ring‐opening polymerization of l‐lactide

A series of tertiary aminosquaramides as bifunctional organocatalysts in the ring‐opening polymerization (ROP) of l ‐lactide (l ‐LA) were developed, allowing the activation of both the l ‐LA monomer and the alcohol group of the initiator/propagating species. Further, the impact of tertiary nitrogen substituents on catalytic activity in ROP of l ‐LA was explored. The tertiary aminosquaramide— an air‐stable and moisture‐stable catalyst—exhibited superior activity in contest with thiourea counterpart when both were equipped with a similar tertiary amine group. Kinetic and chain‐extension experiments indicated that the formed poly(l ‐LA) is featured with narrow polydispersity and high end‐group fidelity, hallmarks of a living polymerization process. The initiator efficiency was further executed at ease by preparation of an ABA triblock copolymer poly (l ‐LA)‐b‐poly (ethylene glycol)‐b‐poly (l ‐LA) in the presence of a dual‐headed PEG macroinitiator. ¹H NMR titration experiments suggested a bifunctional catalytic mechanism, wherein both the l ‐LA monomer and the propagating hydroxyl group were activated en route to polymerization. The ¹H NMR, SEC, and MALDI‐TOF MS measurements validated the quantitative incorporation of the initiator in the polymeric chains and enchainment over competitive trans‐esterification reaction. Overall, the structure‐activity relationships were surveyed to uncover aminosquaramide as a new bifunctional dual hydrogen‐bond donor catalyst for living ROP of l ‐LA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2483–2493