Homolytic substitution in trialkyltin iodides by photochemically generated iodine atoms. I. Kinetics

The kinetics of the homolytic substitution of several trialkyltin iodides by iodine atoms are presented. Rate constants have been determined at three different temperatures and the following activation parameters calculated: A, E_a, and ΔS°^≠. The observation that the activation energy, ΔG^≠, is related to the driving force of the ion-pair formation, leads to the conclusion that the charge-transfer model is a valid approach for substitution in the reaction between R₃SnI compounds and iodine atoms.     

鬼臼毒素及其衍生物热分解反应的动力学研究

The thermal behavior and thermal decomposition kinetic parameters of podophyllotoxin （1） and 4 derivatives, picropodophyllin （2）, deoxypodophyllotoxin （3）, fl-apopicropodophyllin （4）, podophyllotoxone （5） in a temperature-programmed mode have been investigated by means of DSC and TG-DTG. The kinetic model functions in differential and integral forms of the thermal decomposition reactions mentioned above for first stage were established. The kinetic parameters of the apparent activation energy Ea and per-exponential factor A were obtained from analy- sis of the TG-DTG curves by integral and differential methods. The most probable kinetic model function of the decomposition reaction in differential form was （1- a）^2 for compounds 1-3,2/3·a^-1/2 for compound 4 and 1/2（1-a）·[-In（1-a）]^-1 for compound 5. The values of Ea indicated that the reactivity of compounds 1-5was increased in the order： 5〈4〈2〈1〈3. The values of the entropy of activation △S^≠, enthalpy of activation △H^≠ and free energy of activation △G^≠ of the reactions were estimated. The values of △G^≠ indicated that the thermal stability of compounds 1-3 with the samef（a） was increased in the order： 2〈3〈1.     

Kinetic and Mechanistic Insights into the Pathway Leading to Cyclic Crystalline Phosphorus Ylide Formation in the Presence of 3‐Chloropentane‐2,4‐dione: Theoretical and Stopped‐Flow Approaches

In this work, three speculative mechanisms of the reaction between triphenylphosphine and dimethyl acetylendicarboxylate in the presence of 3‐chloropentane‐2,4‐dione were energetically and thermodynamically developed using quantum mechanical calculations and were profoundly compared with stopped‐flow and UV spectrophotometry approaches. The third speculative mechanism that led to the five‐membered ring structure was experimentally and theoretically favorable. The five‐membered ring structure of product was characterized by X‐ray crystallographic data. Also, steps 1 and 2 of the third mechanism were determined as fast and rate‐determining steps, respectively. The experimental kinetic evidence of the formation and decay of intermediate in steps 1 and 2 (fast and rate‐determining steps, respectively) was compatible with theoretical data. Experimental kinetic data were recognized for overall reaction along with activation parameters for fast and rate‐determining steps of the reaction. Theoretical kinetic data (k and E_a) and activation parameters (ΔG^≠, ΔS,^≠ and ΔH^≠) were calculated for each step and overall reactions.     

Thermal Behavior of N,N＇Bis[N-（2,2,2-trinitroethyl）-N-nitro]ethylenediamine

The thermal behavior and kinetic parameters of the exothermic decomposition reaction of N‐N‐bis[N‐(2,2,2‐tri‐nitroethyl)‐N‐nitro]ethylenediamine in a temperature‐programmed mode have been investigated by means of differential scanning calorimetry (DSC). The results show that kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of this reaction are 3(1 ‐α)^2/3, 203.67 kJ·mol^?1 and 10^20.61s^?1, respectively. The critical temperature of thermal explosion of the compound is 182.2 °C. The values of ΔS^≠ ΔH^≠ and ΔG^≠ of this reaction are 143.3 J·mol^?1·K^?1, 199.5 kJ·mol^?1 and 135.5 kJ·mol^?1, respectively.     

Kinetics and Mechanism of the Exothermic First-stage Decomposition Reaction for 1,5-Dimethyl-2,6-bis(2,2,2-trinitroethyl)-glycoluril

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｏｕｒｅａｎｉｔｒａｍｉｎｅｓｗｉｔｈＮ ｔｒｉｎｉｔｒｏｅｔｈｙｌｇｒｏｕｐｓｈａｖｅａｇｒｅａｔｅｒｄｅｎｓｉｔｙａｎｄａｈｉｇｈｅｒｄｅｔｏｎａｔｉｏｎｖｅｌｏｃｉｔｙ .Ｓｏｍｅｏｆｔｈｅｃｏｍｐｏｕｎｄｓｃｏｕｌｄｂｅｕｓｅｄａｓｈｉｇｈｅｘｐｌｏｓｉｖｅｓ .1,5 Ｄｉｍｅｔｈｙｌ 2 ,6 ｂｉｓ(2 ,2 ,2 ｔｒｉｎｉｔｒｏｅｔｈｙｌ)ｇｌｙｃｏｌｕｒｉｌ (1)ｉｓａｔｙｐｉｃａｌｃｙｃｌｏｕｒｅａｎｉｔｒａｍｉｎｅ .Ｔｈｅｃｒｙｓｔａｌｄｅｎｓｉｔｙｉｓ1 74ｇ/…     

Thermal decomposition of formaldehyde diperoxide in aqueous solution

Thermal decomposition of formaldehyde diperoxide (1,2,4,5-tetraoxane) in aqueous solution with an initial concentration of 6.22 × 10^?3 M was studied in the temperatures range from 403 to 439 K. The reaction was found to follow first-order kinetic law, and formaldehyde was the major decomposition product. The activation parameters of the initial step of the reaction (ΔH ^≠ = 15.25 ± 0.5 kcal mol^?1, ΔS ^≠ = ?47.78 ± 0.4 cal mol^?1K^?1, E _a = 16.09 ± 0.5 kcal mol^?1) support a mechanism involving homolytic rupture of one peroxide bond in the 1,2,4,5-tetraoxane molecule with participation of the solvent and formation of a diradical intermediate.     

Kinetics and mechanism of decomposition of intermediate complex during oxidation of pectate polysaccharide by potassium permanganate in alkaline solutions

The kinetics of decomposition of an [Pect·Mn^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at various temperatures of 15–30°C and a constant ionic strength of 0.1 mol dm^?3. The decomposition reaction was found to be first‐order in the intermediate concentration. The results showed that the rate of reaction was base‐catalyzed. The kinetic parameters have been evaluated and found to be ΔS^≠ = ? 190.06 ± 9.84 J mol^?1 K^?1, ΔH^≠ = 19.75 ± 0.57 kJ mol^?1, and ΔG^≠ = 76.39 ± 3.50 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 67–72, 2003     

Non-isothermal decomposition kinetics of diosgenin

The thermal stability and kinetics of isothermal decomposition of diosgenin were studied by thermogravimetry (TG) and Differential Scanning Calorimeter (DSC). The activation energy of the thermal decomposition process was determined from the analysis of TG curves by the methods of Flynn-Wall-Ozawa, Doyle, ?atava-?esták and Kissinger, respectively. The mechanism of thermal decomposition was determined to be Avrami-Erofeev equation (n = 1/3, n is the reaction order) with integral form G(α) = [?ln(1 ? α)]^1/3 (α = 0.10–0.80). E _a and logA [s^?1] were determined to be 44.10 kJ mol^?1 and 3.12, respectively. Moreover, the thermodynamics properties of ΔH ^≠, ΔS ^≠, and ΔG ^≠ of this reaction were 38.18 kJ mol^?1, ?199.76 J mol^?1 K^?1, and 164.36 kJ mol^?1 in the stage of thermal decomposition.     

Micellar catalyzed hydrolysis of mono-2,3-dichloroaniline phosphate

The kinetics of micellar catalyzed hydrolysis of mono-2,3-dichloroaniline phosphate in the presence of different surfactants has been studied at 303?K. The rate of reaction has been found to be first order with respect to both [substrate] and [HCl]. The cationic micelles of cetylpyridinium chloride (CPC), anionic micelles of di-octyl sodium sulphosuccinate (AOT), and non-ionic micelles of polyoxyethylene sorbitan monooleate (Tween 80) enhanced the rate of reaction to a maximum value and after that the increase in concentration of surfactant decreased the reaction rate. The applicability of different kinetic models has been tested to explain the observed micellar effects. The various thermodynamic activation parameters (E_a, ΔH^≠, ΔS^≠, ΔG^≠) have been evaluated. The added salts viz. KCl, KNO₃, K₂SO₄ enhanced the rate of reaction in the presence of CPC, AOT, and Tween 80 micelles. The kinetic parameters were determined from the rate (surfactant) profile and a suitable mechanism consistent with the experimental finding has been proposed.     

Kinetics and Mechanism of the Exothermic First-stage Decomposition Reaction of Dinitroglycoluril

Introduction Dinitroglycoluril (DINGU) is a typical cyclourea nitramine. Its crystal density is 1.94 gcm-3. The detonation velocity corresponding to =1.94 gcm-3 is about 8450 ms-1. Its sensitivity to impact is better than that of cyclotrimethylenetrinitramine. It has the potential for possible use as high explosive from the point of view of the above-mentioned high performance. Its preparation,1-4 properties1-4 and hydrolytic behavior4 have been reported. In the present paper, we report i…     

Kinetic and mechanistic significance of the chemical activation of ciprofloxacin for conjugation chemistry

Ciprofloxacin is an important category of fluroquinolones that has versatile applications in imaging when conjugated with different ligands. For conjugation chemistry, chemical activation of the carboxylic group at the third position is an important step. Here, we study the kinetics for the activation of the acidic group of ciprofloxacin by N‐hydroxysuccinimide (NHS) and dicyclohexylcarbodiimide (DCC). The extent of the reaction was followed by registering a decrease in absorbance at 332, 412, and 423 nm by monitoring the consumption of ciprofloxacin as a function of [NHS], [DCC], pH, ionic strength, and temperature by varying only one parameter at a time while keeping all other parameters constant. The reaction between ciprofloxacin and NHS, in the presence of DCC, exhibits a 1:1:1 stoichiometry. The reaction is found to show first‐order dependence on the concentration of ciprofloxacin to the order of 10³ s^?1(k_obs) and zero order with respect to the concentrations of NHS and DCC, respectively. The activation parameters and thermodynamic quantities vis‐à‐vis E_a, ΔH^≠, and ΔS^≠ have been computed with respect to the forward reaction as 12.024, 131.43, and 27.31 J K^?1 mol^?1, respectively, which provided additional support to the proposed kinetic pathway. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 349–356, 2009     

1H NMR Study of Hindered Internal Rotation of Tetramethylthiuram Disulfide in Binary Dimethyl Sulfoxide‐Chloroform Mixtures

Hindered internal rotation about the C‐N single bonds joining the thiuram disulfide was studied by ¹H NMR complete line‐shaped analysis in different dimethyl sulfoxide‐chloroform (DMSO‐CDCl₃) mixtures. From the temperature dependence of methyls proton spectra, activation parameters (E_a, ΔH^≠, ΔS^≠, and ΔG^≠) were obtained. The Arrhenius plots showed a distinct isokinetic temperature at about 35 °C at which the exchange rate is more or less independent of the solvent composition. The resulting ΔH^≠ against TΔS^≠ plot showed a firmly good linear correlation, indicating the existence of an enthalpy‐entropy composition in an exchange process.     

Kinetic and thermodynamic analysis of degradation of doripenem in the solid state

The kinetic and thermodynamic parameters of degradation of doripenem were studied using a high‐performance liquid chromatography method. In dry air, the degradation of doripenem was a first‐order reaction depending on the substrate concentration. At increased relative air humidity, doripenem was degraded according to the autocatalysis kinetic model. The dependence ln k = f1/T) was described by the equations ln k = 5.10 ± 13.06 ? (7576 ± 4939)(1/T) in dry air and ln k = 46.70 ± 22.44 ? (19,959 ± 8031)(1/T) at 76.4% relative humidity (RH). The thermodynamic parameters E_a, ΔH^≠a, and ΔS^≠a of the degradation of doripenem were calculated. The dependence ln k = f (RH%) was described by the equation ln k = (0.155 ± 0.077) × 10^?1 (RH%) ? (3.45 ± 21.8) × 10^?10. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 722–728, 2012     

The nonisothermal decomposition kinetics of copper(II) complexes with phthalanilic acids and amino acids

Fifteen new kinds of mixed ligand complexes Cu(x‐P)A [P = 2‐(COO)C₆H₄CONH‐C₆H₄; x = H, 2‐Cl, 2‐CH₃, 2‐OCH₃, 4‐OCH₂CH₃; A = dehydronium Met, Leu, Phen] were synthesized. The thermal decomposition behavior of each complex is studied by TG. Coats‐‐Redfern, MacCallum‐‐Tammer, and Zsako methods are adopted to estimate the values of the apparent activation energy E_a, the activation entropy δS^≠, the reaction order n, and the frequency factor A. The results showed that the reaction order is 2/3 for each of the complex. Studies on the mechanism of the thermal decomposition reactions suggested that these reactions all fit the kinetic equation 1 ? (1 ? α)^1/3 = © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 623–628, 2003     

Kinetics of substitution of aqua ligands from cis‐diaqua (ethylenediamine)platinum(II) perchlorate by L‐asparagine in aqueous medium

The kinetics of the interaction of L ‐asparagine with [Pt(ethylenediamine)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(ethylenediamine)(H₂O)₂²⁺], [L ‐asparagine], and temperature at pH 4.0, where the substrate complex exists predominantly as the diaqua species and L ‐asparagine as the zwitterion. The substitution reaction shows two consecutive steps: the first step is the ligand‐assisted anation and the second one is the chelation step. Activation parameters for both the steps have been calculated using Eyring equation. The low ΔH₁^≠ (43.59 ± 0.96 kJ mol^?1) and large negative values of ΔS₁^≠ (?116.98 ± 2.9 J K^?1 mol^?1) as well as ΔH₂^≠ (33.78 ± 0.51 kJ mol^?1) and ΔS₂^≠ (?221.43 ± 1.57 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 252–259, 2003     

Application of isoconversional calculation procedure to non-isothermal kinetics study

The kinetics of thermal decomposition of NH₄CuPO₄·H₂O was studied using isoconversional calculation procedure. The iterative isoconversional procedure was applied to estimate the apparent activation energy E _a; the values of apparent activation energies associated with the first stage (dehydration), the second stage (deamination), and the third stage(condensation) for the thermal decomposition of NH₄CuPO₄·H₂O were determined to be 117.7 ± 7.7, 167.9 ± 8.4, and 217.6 ± 45.5 kJ mol^?1, respectively, which demonstrate that the third stage is a kinetically complex process, and the first and second stages are single-step kinetic processes and can be described by a unique kinetic triplet [E _a, A, g(α)]. A new modified method of the multiple rate iso-temperature was used to define the most probable mechanism g(α) of the two stages; and reliability of the used method for the determination of the kinetic mechanism were tested by the comparison between experimental plot and model results for every heating rate. The results show that the mechanism functions of the two stages are reliable. The pre-exponential factor A of the two stages was obtained on the basis of E _a and g(α). Besides, the thermodynamic parameters (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of the two stages were also calculated.     

Mechanism of the Thermal Z⇌E Isomerization of a Stable Silene; Experiment and Theory

The E and Z geometric isomers of a stable silene (tBu₂MeSi)(tBuMe₂Si)Si=CH(1‐Ad) ( 1 ) were synthesized and characterized spectroscopically. The thermal Z to E isomerization of 1 was studied both experimentally and computationally using DFT methods. The measured activation parameters for the 1Z ? 1E isomerization are: E_a=24.4 kcal mol^?1, ΔH^≠=23.7 kcal mol^?1, ΔS^≠=?13.2 e.u. Based on comparison of the experimental and DFT calculated (at BP86‐D3BJ/def2‐TZVP(‐f)//BP86‐D3BJ/def2‐TZVP(‐f)) activation parameters, the Z?E isomerization of 1 proceeds through an unusual (unprecedented for alkenes) migration–rotation–migration mechanism (via a silylene intermediate), rather than through the classic rotation mechanism common for alkenes.     

Thermodynamic activation parameters for viscous flow of aqueous solutions of butylamines

The thermodynamic activation parameters, enthalpies, ΔH?^≠, free energies, ΔG ^≠, and entropies, ΔS?^≠, for viscous flow of the systems, water (W)?+?n-butylamine (NBA), W?+?sec-butylamine (SBA) and W?+?tert-butylamine (TBA), have been determined by using the density and the viscosity data. These properties and their excess values have been represented graphically against their composition. With respect to the composition, ΔG ^≠ show a typical behaviour for all the systems – a fast rise in the water-rich region with a maximum followed by the values that decline up to the pure state of amines. The ΔH?^≠ and ΔS?^≠ versus composition curves follow the similar trend. For all systems the excess properties, ΔG ^≠E, ΔH ^?≠E and ΔS?^≠E are characterized by sharp maxima in the water-rich region, which are thought to be mainly due to the hydrophobic hydration and the hydrophilic effect.     

Thermochemical Properties and Non-isothermal Decomposition Reaction Kinetics of N-Guanylurea Dinitramide （GUDN）

Introduction N-Guanylurea dinitramide (GUDN) is a new ener-getic oxidizer with higher energy and lower sensitivity. Its crystal density is 1.755 g·cm-3. The detonation velocity is about 8210 m·s-1. Its specific impulse and pressure exponent are 213.1 s and 0.73, respectively. It has the potential for possible use as an energy ingredient of propellants and explosives from the point of view of the above-mentioned high performance. Its preparation,1 properties2 and hygroscopocity2 have been …     

Thermal characterization and kinetic analysis of nano‐ and micro‐Al/NiO thermites: Combined experimental and molecular dynamics simulation study

In the experimental part of this study, thermal properties of the Al and NiO composites in micro‐ and nano‐sized Al are investigated. Differential scanning calorimetry (DSC) analysis of the onset temperatures of ignition, activation energy (E_a), frequency factor (A), rate constant (k), critical ignition temperature of thermal explosion (T_b), and self‐accelerating decomposition temperature (T_SADT), as well as the thermodynamic parameters (ΔS^≠ , ΔH^≠ , and ΔG^≠ ) are used to explore the thermal behavior and analyze the kinetics. Thermal analysis suggests that the mechanism is based on solid–solid diffusion and liquid–gas for the nano‐ and micro‐Al/NiO composite, respectively. Our results indicate that the incorporation of nano‐Al particles can significantly reduce the ignition temperature, E_a, A, k, T_b, and T_SADT. In the second part of this work, molecular dynamics (MD) simulation is used to investigate the behavior of Al/NiO thermite reaction using the Reaxff force field to evaluate the experimental results. Theoretically, MD results show 1,154 K as the reaction ignition temperature, which is in reasonably good agreement with experimental temperature of 893°C (1,166 K). The radial distribution function (RDF) shows that no reaction occurs at 500 K but it is complete at 1,200 K.