Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

Alginate polyelectrolyte ionotropic gels. XVIII. Oxidation of alginate polysaccharide by potassium permanganate in alkaline solutions: Kinetics of decomposition of intermediate complex

The kinetics of decomposition of [Alg · Mn ^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at a constant ionic strength of 0.5 mol dm^?3. The decomposition reaction was found to be first-order in the intermediate concentration. The results showed that the rate of reaction was base-catalyzed. The kinetic parameters have been evaluated and found to be ΔS^? = ?103.88±6.18 J mol^?1 K^?1, ΔH^? = 51.61 ± 1.02 kJ mol^?1, and ΔG^? = 82.57 ± 2.86 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 1993 John Wiley & Sons, Inc.     

Steric and electronic contributions to barriers of internal rotation in 1,8-dibenzoylnaphthalenes

Restricted rotation about the naphthalenylcarbonyl bonds in the title compounds resulted in mixtures of cis and trans rotamers, the equilibrium and the rotational barriers depending on the substituents. For 2,7-dimethyl-1,8-di-(p-toluoyl)-naphthalene (1) ΔH° = 3.66 ± 0.14 kJ mol^?1, ΔS° = 1.67 ± 0.63 J mol^?1 K^?1, ΔH^≠_ct = 55.5 ± 1.3 kJ mol^?1, ΔH^≠_ct = 51.9 ± 1.3 kJ mol^?1, ΔS^≠_ct = ?41.3±4.1 J mol^?1 K^?1 and ΔS^≠_ct = ?42.9±4.1 J mol^?1 K^?1. The rotation about the phenylcarbonyl bond requires ΔH^≠ = ?56.9±4.4 kJ mol^?1 and ΔS^≠ = ?20.5±15.3 J mol^?1 K^?1 for the cis rotamer, and ΔH^≠ = 43.5Δ0.4 kJ mol^?1 and ΔS^≠ =± ?22.4Δ1.3 J mol^?1 K^?1 for the trans rotamer. The role of electronic factors is likely to be virtually the same for both these rotamers but steric interaction between the two phenyl rings occurs in the cis rotamer only. Hence, the difference of the activation enthalpies obtained for the cis and trans rotamers, ΔΔH^?1 = 13.4 kJ mol^?1, provides a basis for the estimation of the role of steric factors in this rotation. For the tetracarboxylic acid 2 and its tetramethyl ester 3 the equilibrium is even more shifted towards the trans form because of enhanced steric and electrostatic interactions between the substituents in the cis form. The barriers for the rotation around the phenylcarbonyl bond and the cis-trans isomerization are lowered; an explanation for this result is presented.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Low temperature 13C NMR study of 1-(3-pentyloxyphenylcarbamoyloxy)-2-dialkyl- aminocyclohexanes

Cyclohexane and piperidine ring reversal in 1-(3-pentyloxyphenylcarbamoyloxy)-2-dialkylaminocyclohexanes was investigated by ¹³C NMR. An unusually low conformational energy ΔG = 0.59 kJ mol^?1 and activation parameters ΔG^≠₂₁₈ = 43.8 ± 0.4 kJ mol^?1, ΔH^≠ = 48.9 ± 2.5 kJ mol^?1 and ΔS^≠ = 23 ± 9 J mol^?1 K^?1 were found for the diequatorial to diaxial transition of the cyclohexane ring in the trans-pyrrolidinyl derivative. In the trans-piperidinyl derivative, ΔG₂₂₂ = 44.7 ± 0.5 KJ mol^?1, ΔH^≠ = 55.7 ± 6.3 kJ mol^?1 and ΔS^≠ = 51 ± 21 J mol^?1 K^?1 was found for the piperidine ring reversal from the non-equivalence of the α-carbons.     

Sigmatropic [1,3]-boron shift (permanent allylic rearrangement) in 3-allyl-3-borabicyclo[3.3.1]nonanes

2D ¹H-¹H EXSY NMR spectroscopy show that the free energy of activation ΔG ^≠ in six 3-allyl-3-borabicyclo[3.3.1]nonane derivatives is significantly higher (72–86 kJ mol^?1) than that in typical allylboranes (48–66 kJ mol^?1). For the first member of the series, viz., 3-allyl-3-borabicyclo[3.3.1]nonane, the activation parameters of the permanent allylic rearrangement were also determined (ΔH ^≠ = 82.7±3.4 kJ mol^?1, ΔS ^≠ = ?11.8±10.3 J mol^?1 K^?1, E _A = 85.5±3.4 kJ mol^?1, lnA = 29.2±1.2).     

Non-isothermal decomposition kinetics of diosgenin

The thermal stability and kinetics of isothermal decomposition of diosgenin were studied by thermogravimetry (TG) and Differential Scanning Calorimeter (DSC). The activation energy of the thermal decomposition process was determined from the analysis of TG curves by the methods of Flynn-Wall-Ozawa, Doyle, ?atava-?esták and Kissinger, respectively. The mechanism of thermal decomposition was determined to be Avrami-Erofeev equation (n = 1/3, n is the reaction order) with integral form G(α) = [?ln(1 ? α)]^1/3 (α = 0.10–0.80). E _a and logA [s^?1] were determined to be 44.10 kJ mol^?1 and 3.12, respectively. Moreover, the thermodynamics properties of ΔH ^≠, ΔS ^≠, and ΔG ^≠ of this reaction were 38.18 kJ mol^?1, ?199.76 J mol^?1 K^?1, and 164.36 kJ mol^?1 in the stage of thermal decomposition.     

Activation of the aromatic system by the SO2CF3 group: Kinetics study and structure–reactivity relationships

The rate constants for the reaction of 2,6‐bis(trifluoromethanesulfonyl)‐4‐nitroanisole with some substituted anilines have been measured by spectrophotometric methods in methanol at various temperatures. The data are consistent with the S_NAr mechanism. The effect of substituents on the rate of reaction has been examined. Good linear relationships were obtained from the plots of log k₁ against Hammett σ_para constants values at all temperature with negative ρ values (?1.68 to ?1.11). Activation parameters Δ^≠H varied from 41.6 to 54.3 kJ mol^?1 and Δ^≠S from ?142.7 to ?114.6 J mol^?1 K^?1. The δΔ^≠H and δΔ^≠S reaction constants were determined from the dependence of Δ^≠H and Δ^≠S activation parameters on the σ substituent constants, by analogy with the Hammett equation. A plot of Δ^≠H versus Δ^≠S for the reaction gave good straight line with 177°C isokinetic temperature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 203–210, 2010     

Thermal decomposition and non-isothermal decomposition kinetics of carbamazepine

The thermal stability and kinetics of isothermal decomposition of carbamazepine were studied under isothermal conditions by thermogravimetry (TGA) and differential scanning calorimetry (DSC) at three heating rates. Particularly, transformation of crystal forms occurs at 153.75°C. The activation energy of this thermal decomposition process was calculated from the analysis of TG curves by Flynn-Wall-Ozawa, Doyle, distributed activation energy model, ?atava-?esták and Kissinger methods. There were two different stages of thermal decomposition process. For the first stage, E and logA [s^?1] were determined to be 42.51 kJ mol^?1 and 3.45, respectively. In the second stage, E and logA [s^?1] were 47.75 kJ mol^?1 and 3.80. The mechanism of thermal decomposition was Avrami-Erofeev (the reaction order, n = 1/3), with integral form G(α) = [?ln(1 ? α)]^1/3 (α = ～0.1–0.8) in the first stage and Avrami-Erofeev (the reaction order, n = 1) with integral form G(α) = ?ln(1 ? α) (α = ～0.9–0.99) in the second stage. Moreover, ΔH ^≠, ΔS ^≠, ΔG ^≠ values were 37.84 kJ mol^?1, ?192.41 J mol^?1 K^?1, 146.32 kJ mol^?1 and 42.68 kJ mol^?1, ?186.41 J mol^?1 K^?1, 156.26 kJ mol^?1 for the first and second stage, respectively.     

Dynamic proton magnetic resonance studies on complex spin systems. Non-mutual three-spin exchange in N-(trideuteriomethyl)-2-cyanoaziridine

At room temperature and below, the proton NMR spectrum of N-(trideuteriomethyl)-2-cyanoaziridine consists of two superimposed ABC patterns assignable to two N-invertomers; a single time-averaged ABC pattern is observed at 158.9°C. The static parameters extracted from the spectra in the temperature range from –40.3 to 23.2°C and from the high-temperature spectrum permit the calculation of the thermodynamic quantities ΔH⁰ = ?475±20 cal mol^?1 (?1.987 ± 0.084 kJ mol^?1) and ΔS⁰ = 0.43±0.08 cal mol^?1 K^?1 (1.80±0.33 J mol^?1 K^?1) for the cis ? trans equilibrium. Bandshape analysis of the spectra broadened by non-mutual three-spin exchange in the temperature range from 39.4–137.8°C yields the activation parameters ΔH_tc^≠ = 17.52±0.18 kcal mol^?1 (73.30±0.75 kJ mol^?1), ΔS_tc^≠ = ?2.08±0.50 cal mol^?1 K^?1 (?8.70±2.09 J mol^?1 K^?1) and ΔG_tc^≠ (300 K) = 18.14±0.03 kcal mol^?1 (75.90±0.13 kJ mol^?1) for the trans → cis isomerization. An attempt is made to rationalize the observed entropy data in terms of the principles of statistical thermodynamics.     

Kinetics and mechanism of the interaction of adenosine with cis‐diaqua(cis‐1,2‐diaminocyclohexane)platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of adenosine with cis‐[Pt(cis‐dach)(OH₂)₂]²⁺ (dach = diaminocyclohexane) was studied spectrophotometrically as a function of [cis‐[Pt(cis‐dach)(OH₂)₂]²⁺], [adenosine], and temperature at a particular pH (4.0), where the substrate complex exists predominantly as the diaqua species and the ligand adenosine exists as a neutral molecule. The substitution reaction shows two consecutive steps: the first is the ligand‐assisted anation followed by a chelation step. The activation parameters for both the steps have been evaluated using Eyring equation. The low negative value of ΔH^≠₁ (43.1 ± 1.3 kJ mol^?1) and the large negative value of ΔS^≠₁ (?177 ± 4 J K^?1 mol^?1) along with ΔH^≠₂ (47.9 ± 1.8 kJ mol^?1) and ΔS^≠₂ (?181 ± 6 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. The kinetic study was substantiated by infrared and electrospray ionization mass spectroscopic analysis. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 219–229, 2011     

A kinetic study of the oxidation of L-ascorbic acid by chromium(VI)

The reaction between chromium(VI) and L-ascorbic acid has been studied by spectrophotometry in the presence of aqueous citrate buffers in the pH range 5.69–7.21. The reaction is slowed down by an increase of the ionic strength. At constant ionic strength, manganese(II) ion does not exert any appreciable inhibition effect on the reaction rate. The rate law found is where K_p is the equilibrium constant for protonation of chromate ion and k_r is the rate constant for the redox reaction between the active forms of the oxidant (hydrogenchromate ion) and the reductant (L-hydrogenascorbate ion). The activation parameters associated with rate constant k_r are E_a = 20.4 ± 0.9 kJ mol^?1, ΔH^≠ = 17.9 ± 0.9 kJ mol^?1, and ΔS^≠=?152 ± 3 J K^?1 mol^?1. The reaction thermodynamic magnitudes associated with equilibrium constant K_p are ΔH⁰ = 16.5 ± 1.1 kJ mol^?1 and ΔS⁰ = 167 ± 4 J K^?1 mol^?1. A mechanism in accordance with the experimental data is proposed for the reaction. © 1993 John Wiley & Sons, Inc.     

Kinetics of non-isothermal decomposition of cinnamic acid

The thermal stability and kinetics of decomposition of cinnamic acid were investigated by thermogravimetry and differential scanning calorimetry at four heating rates. The activation energies of this process were calculated from analysis of TG curves by methods of Flynn-Wall-Ozawa, Doyle, Distributed Activation Energy Model, ?atava-?esták and Kissinger, respectively. There are only one stage of thermal decomposition process in TG and two endothermic peaks in DSC. For this decomposition process of cinnamic acid, E and logA[s^?1] were determined to be 81.74 kJ mol^?1 and 8.67, respectively. The mechanism was Mampel Power law (the reaction order, n = 1), with integral form G(α) = α (α = 0.1–0.9). Moreover, thermodynamic properties of ΔH ^≠, ΔS ^≠, ΔG ^≠ were 77.96 kJ mol^?1, ?90.71 J mol^?1 K^?1, 119.41 kJ mol^?1.     

Kinetics of substitution of aqua ligands from cis‐diaqua (ethylenediamine)platinum(II) perchlorate by L‐asparagine in aqueous medium

The kinetics of the interaction of L ‐asparagine with [Pt(ethylenediamine)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(ethylenediamine)(H₂O)₂²⁺], [L ‐asparagine], and temperature at pH 4.0, where the substrate complex exists predominantly as the diaqua species and L ‐asparagine as the zwitterion. The substitution reaction shows two consecutive steps: the first step is the ligand‐assisted anation and the second one is the chelation step. Activation parameters for both the steps have been calculated using Eyring equation. The low ΔH₁^≠ (43.59 ± 0.96 kJ mol^?1) and large negative values of ΔS₁^≠ (?116.98 ± 2.9 J K^?1 mol^?1) as well as ΔH₂^≠ (33.78 ± 0.51 kJ mol^?1) and ΔS₂^≠ (?221.43 ± 1.57 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 252–259, 2003     

Thermal decomposition of formaldehyde diperoxide in aqueous solution

Thermal decomposition of formaldehyde diperoxide (1,2,4,5-tetraoxane) in aqueous solution with an initial concentration of 6.22 × 10^?3 M was studied in the temperatures range from 403 to 439 K. The reaction was found to follow first-order kinetic law, and formaldehyde was the major decomposition product. The activation parameters of the initial step of the reaction (ΔH ^≠ = 15.25 ± 0.5 kcal mol^?1, ΔS ^≠ = ?47.78 ± 0.4 cal mol^?1K^?1, E _a = 16.09 ± 0.5 kcal mol^?1) support a mechanism involving homolytic rupture of one peroxide bond in the 1,2,4,5-tetraoxane molecule with participation of the solvent and formation of a diradical intermediate.     

Cobaltchelate als Hydrierkatalysatoren. II). Hydridbildung beim [Co(dmgH)2]- und [Co(dpnH)]+ -Komplex

Cobalt Chelates for Hydrogenation Catalysts. II. Hydride Formation with [Co(dmgH)₂] and [Co(dpnH)]⁺ In the presence of benzil as scavanger for the hydridocomplexes [Co(dpnH)]⁺ and [Co(dmgH)₂] the hydride formation in water/n-propanol (50% v/v) becomes the rate determining step, and the ligand hydrogenation is completely suppressed in the case of [Co(dpnH)]⁺, but only partially in the case of [Co(dmgH)₂]. The rate of hydride formation in both cases is 2^nd order with respect to the complex, and the activation parameters ([Co(dmgH)₂]: ΔH^≠ = 48.4 ± 1.0 kJ · mol–¹, ΔS^≠ = ?57.4 ± 3.4J · mol^?1 · K^?1, [Co(dpnH)]⁺: ΔH^≠ = 52.7 = 0.4 kJ · mol^?1, ΔS^≠ = ?59.8 ± 1.2J · mol^?1 · K^?1) indicate a H₂-activation by homolytic splitting for both complexes. Some sources of error and possible causes for the missing activity of [Co(tim)]²⁺ are discussed.     

The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.