MoS2-Based Catalysts for N2 Electroreduction to NH3 – An Overview of MoS2 Optimization Strategies

The nitrogen reduction reaction (NRR) has become an ideal alternative to the Haber-Bosch process, as NRR possesses, among others, the advantage of operating under ambient conditions and saving energy consumption. The key to efficient NRR is to find a suitable electrocatalyst, which helps to break the strong N≡N bond and improves the reaction selectivity. Molybdenum disulfide (MoS₂) as an emerging layered two-dimensional material has attracted a mass of attention in various fields. In this minireview, we summarize the optimization strategies of MoS₂-based catalysts which have been developed to improve the weak NRR activity of primitive MoS₂. Some theoretical predictions have also been summarized, which can provide direction for optimizing NRR activity of future MoS₂-based materials. Finally, an outlook about the optimization of MoS₂-based catalysts used in electrochemical N₂ fixation are given.     

Flowerlike MoS2 nanoparticles: solvothermal synthesis and characterization

Flowerlike MoS₂ nanoparticles have been successfully synthesized through a mild solvothermal reaction with the aid of ethanol aqueous solution, and the samples have been characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and low temperature nitrogen adsorption-desorption. The nanometer flower MoS₂ is composed of ultrathin nanosheets of approximately 10 nanometers in thickness. The influence of the reaction temperature and the reaction time on the formation of the flowerlike MoS₂ nanoparticles were evaluated. The optimal experimental conditions were determined as follows: the molar ratio of 1:1 between ethanol and water, the reaction temperature of 190°C, and the reaction time of 24 h. __________ Translated from Chinese Journal of Inorganic Chemistry, 2008, 24(6) (in Chinese)     

The intercalation of transition metal salen complexes into layered MoS2

Exfoliation-restack method has been employed to synthesize the intercalation compounds based on the cationic complexes [M(Salen)]⁺ (M = Mn³⁺, Fe³⁺, Co³⁺; Salen = N, N′-ethylene-bis(salicylaldimine)) into the layered MoS₂. Their conductivity is in the range of 0.04–0.1 S/cm, which is much higher than the pristine MoS₂. Magnetic measurement indicated that the intercalation compounds [Mn(Salen)]_0.18MoS₂ · 0.25H₂O and [Fe(Salen)]_0.12MoS₂ · 0.3H₂O exhibit the temperature-dependent paramagnetism, which obviates from the Curie–Weiss law due to the temperature-independent paramagnetism of the exfoliated MoS₂ slabs, while [Co(Salen)]_0.14MoS₂ · 0.5H₂O exhibits the almost temperature-independent paramagnetism. All three intercalation compounds do not show magnetic spin crossover behavior.     

Visible-light-mediated facile synthesis of disulfides using reusable TiO2/MoS2 nanocomposite photocatalyst

A nontoxic and inexpensive TiO₂/MoS₂ nanocomposite was prepared and employed as an efficient photocatalyst for the synthesis of symmetrical disulfides under visible light irradiation at room temperature. Both aryl and alkyl thiols survived the reaction conditions, affording the corresponding disulfides in good to excellent yields. The photocatalyst could be easily recovered by simple centrifugation and filtration and reused several times without significant loss in its activity.     

Hybrid Structures of Sisal Fiber Derived Interconnected Carbon Nanosheets/MoS2/Polyaniline as Advanced Electrode Materials in Lithium-Ion Batteries

In this work, we designed and successfully synthesized an interconnected carbon nanosheet/MoS₂/polyaniline hybrid (ICN/MoS₂/PANI) by combining the hydrothermal method and in situ chemical oxidative polymerization. The as-synthesized ICNs/MoS₂/PANI hybrid showed a “caramel treat-like” architecture in which the sisal fiber derived ICNs were used as hosts to grow “follower-like” MoS₂ nanostructures, and the PANI film was controllably grown on the surface of ICNs and MoS₂. As a LIBs anode material, the ICN/MoS₂/PANI electrode possesses excellent cycling performance, superior rate capability, and high reversible capacity. The reversible capacity retains 583 mA h/g after 400 cycles at a high current density of 2 A/g. The standout electrochemical performance of the ICN/MoS₂/PANI electrode can be attributed to the synergistic effects of ICNs, MoS₂ nanostructures, and PANI. The ICN framework can buffer the volume change of MoS₂, facilitate electron transfer, and supply more lithium inset sites. The MoS₂ nanostructures provide superior rate capability and reversible capacity, and the PANI coating can further buffer the volume change and facilitate electron transfer.     

Catalytic oxidation of no to NO2 over Cr/TiO2 and Cu/TiO2 under oxidizing atmosphere

The catalytic activity of Cr/TiO₂ and Cu/TiO₂ for the oxidation of NO under an oxidizing atmosphere has been examined. Both catalysts had excellent ability for the oxidation of NO to NO₂ in the temperature range of 350–400°C.     

不同磷含量对NiMoP/Al2O3加氢处理催化剂的影响

采用NiMoP浸渍液浸渍载体γ Al₂O₃制备了不同磷含量的NiMoP/Al₂O₃加氢处理催化剂。为了研究磷对该系列催化剂活性相结构的影响,用二苯并噻吩（DBT）和喹啉为模型化合物,考察了催化剂的加氢脱硫（HDS）和加氢脱氮（HDN）性能。结果表明,添加适当的磷能够提高催化剂的HDS和HDN活性,但是高含量的磷能显著的降低催化剂的催化性能。通过对催化剂进行XRD和HRTEM表征发现,添加磷能够增加MoS2的堆积层数以及Ⅱ型“Ni-Mo-S”相的相对含量,这是因为在制备过程中添加磷降低了活性组分与载体之间的相互作用。     

Structure and Thiophene Hydrodesulfurization Activity of MoS2/Al2O3 Catalysts

It was found that, in MoS₂/Al₂O₃ catalysts prepared by exfoliation, the structure of MoS₂ is strongly distorted. The catalytic activities of these catalysts and traditionally prepared catalysts toward the hydrodesulfurization of thiophene were compared. It was established that the stacking dimension of MoS₂ in the catalysts prepared by exfoliation was 200 Å, whereas it was 20 Å in a standard catalyst. It was demonstrated that, although the number of molybdenum atoms in the edge plane per gram of MoS₂ in the catalysts prepared by exfoliation was 10 times smaller than that in the standard catalyst, the activity of these catalysts was close to the activity of the standard catalyst. On this basis, it was suggested that the hydrodesulfurization of thiophene can occur on the basal plane of MoS₂ that has a defect-free structure with a distorted environment of molybdenum.     

Hierarchical Nanoboxes Composed of Co9S8−MoS2 Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

The development of hydrogen evolution catalysts based on nonprecious metals is essential for the practical application of water‐splitting devices. Herein, the synthesis of Co₉S₈?MoS₂ hierarchical nanoboxes (HNBs) as efficient catalysts for the hydrogen evolution reaction (HER) is reported. The surface of the hollow cubic structure was organized by CoMoS₄ nanosheets formed through the reaction of MoS₄^2? and Co²⁺ released from the cobalt zeolite imidazole framework (ZIF‐67) templates under reflux in a mixture of water/ethanol. The formation process for the CoMoS₄ HNB structures was characterized by TEM images recorded at various reaction temperatures. The amorphous CoMoS₄ HNBs were converted through sequential heat treatments into CoS_x?MoS₂ and Co₉S₈?MoS₂ HNBs. Owing to their unique chemical compositions and structural features, Co₉S₈?MoS₂ HNBs have a high specific surface area (124.6 m² g^?1) and superior electrocatalytic performances for the HER. The Co₉S₈?MoS₂ HNBs exhibit a low overpotential (η₁₀) of 106 mV, a low Tafel slope of 51.8 mV dec^?1, and long‐term stability in an acidic medium. The electrocatalytic activity of Co₉S₈?MoS₂ HNBs is superior to that of recently reported values, and these HNBs prove to be promising candidates for the HER.     

Synergistic Catalysis of SnO2/Reduced Graphene Oxide for VO2+/VO2+ and V2+/V3+ Redox Reactions

In spite of their low cost, high activity, and diversity, metal oxide catalysts have not been widely applied in vanadium redox reactions due to their poor conductivity and low surface area. Herein, SnO₂/reduced graphene oxide (SnO₂/rGO) composite was prepared by a sol–gel method followed by high-temperature carbonization. SnO₂/rGO shows better electrochemical catalysis for both redox reactions of VO²⁺/VO₂⁺ and V²⁺/V³⁺ couples as compared to SnO₂ and graphene oxide. This is attributed to the fact that reduced graphene oxide is employed as carbon support featuring excellent conductivity and a large surface area, which offers fast electron transfer and a large reaction place towards vanadium redox reaction. Moreover, SnO₂ has excellent electrochemical activity and wettability, which also boost the electrochemical kinetics of redox reaction. In brief, the electrochemical properties for vanadium redox reactions are boosted in terms of diffusion, charge transfer, and electron transport processes systematically. Next, SnO₂/rGO can increase the energy storage performance of cells, including higher discharge electrolyte utilization and lower electrochemical polarization. At 150 mA cm⁻², the energy efficiency of a modified cell is 69.8%, which is increased by 5.7% compared with a pristine one. This work provides a promising method to develop composite catalysts of carbon materials and metal oxide for vanadium redox reactions.     

DFT study into the reaction mechanism of CO methanation over pure MoS2

Mo‐based catalysts are commonly used in the direct methanation of CO; however, no integrated mechanism has been proposed due to limits in characterizing the nano‐sized active structures of MoS₂. Thus, we report our investigation into the mechanism of CO methanation over pure MoS₂ through density functional theory simulations, considering that only MoS₂ edge sites exhibit catalytic activity. Simulations revealed the presence of (010) and (110) surfaces on the MoS₂ edges. Both surfaces are reconstructed by the redistribution of surface sulfur atoms upon exposure to H₂/H₂S, and after sulfur coverage redistribution, S vacancies are generated for CO hydrogenation. The reaction mechanisms on both surfaces are discussed, with the S‐edge being better suited to CO methanation than Mo‐edge on the (010) surface. The rate‐controlling step differs between surfaces, and corresponds to the initial activation reaction, which was achieved more easily on the (110) surface.     

Size‐Dependent Enhancement of Electrocatalytic Oxygen‐Reduction and Hydrogen‐Evolution Performance of MoS2 Particles

MoS₂ particles with different size distributions were prepared by simple ultrasonication of bulk MoS₂ followed by gradient centrifugation. Relative to the inert microscale MoS₂, nanoscale MoS₂ showed significantly improved catalytic activity toward the oxygen‐reduction reaction (ORR) and hydrogen‐evolution reaction (HER). The decrease in particle size was accompanied by an increase in catalytic activity. Particles with a size of around 2 nm exhibited the best dual ORR and HER performance with a four‐electron ORR process and an HER onset potential of ?0.16 V versus the standard hydrogen electrode (SHE). This is the first investigation on the size‐dependent effect of the ORR activity of MoS₂, and a four‐electron transfer route was found. The exposed abundant Mo edges of the MoS₂ nanoparticles were proven to be responsible for the high ORR catalytic activity, whereas the origin of the improved HER activity of the nanoparticles was attributed to the plentiful exposed S edges. This newly discovered process provides a simple protocol to produce inexpensive highly active MoS₂ catalysts that could easily be scaled up. Hence, it opens up possibilities for wide applications of MoS₂ nanoparticles in the fields of energy conversion and storage.     

Electrochemical catalysis and corrosion of defective MoS2: Microscopic behaviors and density-functional-theory calculations

MoS₂ is an intriguing layered material widely used in catalysis, lubrication, optoelectronic devices and many other fields, where various structural defects (e.g., vacancies, edges, dopants) will be created in the synthesis and application processes. The promoting effect of defects on the electrochemical reactions, for example, oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER), on MoS₂ has been intensively pursued for efficient catalysts, but should be avoided for durable and superior lubricants and optoelectronic devices working in many atmospheric/aqueous environments. Here, from the perspectives of density-functional-theory simulation, we review the contemporary research progresses on these electrochemical reactions and the underlying microscopic mechanisms of defective MoS₂, and finally project the future research trends and challenges on the electrochemical catalysis and corrosion of defective MoS₂.     

The performance of a Ru?Mo sulfide catalyst for H2S decomposition

A γ-alumina-supported bimetallic Ru-Mo sulfide catalyst preparedvia precipitation from homogeneous solution (PFHS) has been used to effect the abstraction of H₂ from H₂S. The decomposition reaction was also carried out over Al₂O₃-supported RuS₂ and MoS₂ catalysts synthesizedvia PFHS. The performance of bimetallic system exceeded (ca. 40%) the simple additive activities of the constituent monometallic sulfide catalysts and about 2–3 times the individual activities of the monometallic sulfide samples, suggesting chemical synergism between Ru and Mo in the Ru-Mo catalyst. In particular, comparison with other catalysts in the literature showed that specimens preparedvia PFHS exhibited better activities than those from direct sulfidation of the metal oxide. Kinetic study over the Ru-Mo bimetallic sulfide catalyst in a quartz micro-reactor at 110 kPa and between 783–973 K revealed a 1st order dependency on H₂S partial pressure and an activation energy of about 92 kJ mol⁻¹. The irreversible adsorption of H₂S on a coordinatively unsaturated site is thought to be the rate-limiting step.     

Distance Synergy of MoS2‐Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution

Perturbing the electronic structure of the MoS₂ basal plane by confining heteroatoms offers the opportunity to trigger in‐plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS₂‐confined single‐atom rhodium is presented, leading to an ultra‐high HER activity at the in‐plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra‐low overpotential of 67 mV is achieved at a current density of 10 mA cm^?2 in acidic solution. Experiments and first‐principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in‐plane S atoms, which presents a volcanic trend with the inter‐rhodium distance. This study provides a new strategy to tailor the activity of MoS₂ surface via modulating the distance between confined single atoms.     

Cobalt-promoted MoS2 nanosheets: A promising novel diesel hydrodesulfurization catalyst

MoS₂ has been commonly used as a catalyst in hydrodesulfurization (HDS) of petroleum cuts in crude oil refineries. In this study, the synthesis of unsupported MoS₂ and Co-promoted MoS₂ nanosheets produced from molybdenum oxide and thiourea is reported. The synthesized samples were characterized by using x-ray fluorescence, x-ray diffraction, Brunauer–Emmett–Teller (BET), temperature-programmed reduction, thermal gravimetric analysis, and transmission electron microscopy methods, and then they were utilized for HDS of diesel through a fixed-bed catalytic reactor. Results indicated that a cobalt promoter affected both the number and the performance of active sites of the molybdenum sulfides, and the activity of the promoted MoS₂ catalyst was consistently higher than that of the MoS₂ catalyst. More significantly, the activity of the promoted catalyst was slightly declined during 48 h continuous HDS reaction, which indicated the stability of this catalyst. Additionally, during 12 h of test run, the HDS activity of the promoted catalyst was about 60% higher than MoS₂ one.     

Controlled Synthesis of Ni-Doped MoS2 Hybrid Electrode for Synergistically Enhanced Water-Splitting Process

The development of high-efficiency, low-cost, and earth-abundant electrocatalysts for overall water splitting remains a challenge. In this work, Ni-modified MoS₂ hybrid catalysts are grown on carbon cloth (Ni-Mo-S@CC) through a one-step hydrothermal treatment. The optimized Ni-Mo-S@CC catalyst shows excellent hydrogen evolution reaction (HER) activity with a low overpotential of 168 mV at a current density of 10 mA cm⁻² in 1.0 m KOH, which is lower than those of Ni-Mo-S@CC (1:1), Ni-Mo-S@CC (3:1), and pure MoS₂. Significantly, the Ni-Mo-S@CC hybrid catalyst also displays outstanding oxygen evolution reaction (OER) activity with a low overpotential of 320 mV at a current density of 10 mA cm⁻², and remarkable long-term stability for 30 h at a constant current density of 10 mA cm⁻². Experimental results and theoretical analysis based on density functional theory demonstrate that the excellent electrocatalytic performance can be attributed mainly to the remarkable conductivity, abundant active sites, and synergistic effect of the Ni-doped MoS₂. This work sheds light on a unique strategy for the design of high-performance and stable electrocatalysts for water-splitting electrolyzers.     

Formation of α-Fe2O3/FeOOH nanostructures with various morphologies by a hydrothermal route and their photocatalytic properties

A series of α-Fe₂O₃/FeOOH nanostructures with different morphologies have successfully been synthesized based on K₄[Fe(CN)₆] at 140 °C by a novel hydrothermal method. The morphology and phase of α-Fe₂O₃/FeOOH can be controlled by adjusting the reaction time. UV–vis absorption spectrum, X-ray powder diffraction, and transmission electron microscopy analyses were used to characterize the resulting products. A detailed, rational mechanism is proposed for the formation of α-Fe₂O₃/FeOOH nanostructures. The potential applications of the as-synthesized α-Fe₂O₃/FeOOH nanoparticles with different morphologies on photocatalytic decomposition of salicylic acid were also investigated.     

Low-temperature catalytic preparation of multi-wall MoS<Subscript>2</Subscript> nanotubes

In the catalytic reduction atmosphere of H₂+CH₄+C₄H₄S, the ball-milled precursor (NH₄)₂MoS₄ is heated to 300°C for decomposition. The as-synthesized product is characterized by XRD, SEM, HRTEM, EDX, and BET. The results show that multi-wall MoS₂ nanotubes are obtained. The length of the nanotubes is around 3–5 μm. The diameters of the nanotubes are homogeneous, with an inner diameter of ∼15 nm, an outer diameter of ∼30 nm, and an interlayer (002) d-spacing of 0.63 nm. This catalytic thermal reaction occurring at low temperatures is important for the large-scale preparation of similar transition-metal disulfide nanotubes.     

The creation of the magnetic and metallic characteristics in low-width MoS2 nanoribbon (1D MoS2): A DFT study

A basic understanding of the catalytic performance is needed to probe the physical properties that change with a reduction in the catalytic clusters size. It has been shown that the edge of low-width MoS₂ nanoribbon has a metallic characteristic, while that of bulk MoS₂ has a semi-conductive characteristic. For probing the observations, we constructed the models representing the surface atoms and the edge atoms of the MoS₂ nanoribbon. The nanoribbon-like model can also be used to model the edge atoms of the nanocluster MoS₂ .Then we calculated the density of states (DOS) of infinitely two-dimensional MoS₂ and of the structure corresponding to the edge atoms of the MoS₂ nanoribbon-like structure with Wien2K software. The magnetic moment of structures was calculated for identifying the magnetic structure. We found that the bulk MoS₂ and infinitely two-dimensional MoS₂ are semi-conductive and not magnetic, while the computation model corresponding to MoS₂ nanoribbon is metallic. The calculation anticipates that the edges of the MoS₂ nanocluster and the low-width MoS₂ nanoribbon are strongly magnetic.