氨基两亲高分子磁性微球的制备与表征

采用分散聚合法,以乙醇水为介质,在Fe3O4磁流体存在下,通过苯乙烯与聚氧乙烯大分子单体(MPEO)共聚制备了同时具有两亲性和磁响应性的端基为氨基的高分子微球.改变聚合条件可以得到平均粒径范围在5～80μm,氨基含量为0.01～0.25mmolg的两亲磁性高分子微球.     

两亲高分子微球的合成与表征

通过苯乙烯和聚氧乙烯大分子单体的共聚,合成了粒径在0.5μm～1.5μm的两亲高分子微球.随着聚氧乙烯大分子单体浓度的增加,微球粒径减小.通过扫描电镜,IR等分析手段对微球进行了表征.     

微波辐射分散聚合制备单分散聚苯乙烯-g-聚氧乙烯微球

传统乳液聚合、悬浮聚合、分散聚合等方法可制备高分子微球,但微球表面吸附的表面活性剂或稳定剂,以及表面缺少功能性基团等原因,导致微球应用受到限制.大分子单体技术在制备单分散功能性高分子微球方面具有许多优势,以致近年来备受国内外学者关注[1].聚氧乙烯PEO大分子单体参与St的分散聚合中,PEO大分子单体可与St形成PSt-g-PEO两亲接技共聚物,制得的PSt-g-PEO两亲共聚物既是产物也是稳定剂.聚合过程中PEO起着稳定分散作用,解决了传统聚合反应中需要添加稳定剂,以及反应完成后脱除稳定剂的麻烦[2,3].通过含功能基团的大分子单体,…     

分散聚合制备聚苯乙烯/聚氧乙烯两亲磁性高分子微球

采用分散聚合法，以乙醇／水为介质，在Fe3O4磁流体存在下，通过苯乙烯与聚氧乙烯大分子单体共聚制备休磁性高分子微球。 研究了聚合条件对微球粒径的影响。通过改变聚合条件，可以得到平均粒径为5μm-100μm的两亲磁性高分子微球。     

分散聚合制备聚苯乙烯/聚氧乙烯两亲聚合物微球

聚乙二醇在NaH的作用下和对氯甲基苯乙烯反应制得聚氧乙烯大分子单体 ,然后在乙醇 /水的介质中通过聚氧乙烯大分子单体和苯乙烯的分散共聚制得粒径范围在 0 5～ 1 5 μm ,粒径分布接近单分散的两亲聚合物微球 .对影响微球粒径和粒径分布的各个因素进行了研究 .     

1,1-二苯基乙烯存在下无皂乳液聚合制备磁性复合微球

报道了一种制备磁性复合微球的方法——DPE法.在自由基控制剂1,1-二苯基乙烯(DPE)存在条件下,甲基丙烯酸甲酯(MMA)与丙烯酸(AA)发生无皂乳液聚合,制备能与Fe3O4粒子相螯合的活性短链共聚物,加入Fe3O4粒子把短链共聚物引到其表面,引发其它单体继续在Fe3O4粒子表面聚合,制备磁性复合微球.研究了AA、DPE、引发剂及Fe3O4粒子加入量等对制备磁性复合微球的影响.并在此基础上,对优化后工艺制备的磁性复合微球进行了TEM、TGA及磁响应性表征.结果表明,利用该新的方法制备出了磁含量为20%、比饱和磁化强度为32.2emu/g、平均粒径为265nm且表面不含任何杂质的磁性复合微球.     

不同表面官能团和化学组成共聚物微球的表面生物矿化研究

采用具有不同共聚物组成和端基官能团的聚己内酯-b-聚乙二醇共聚物(PCL-b-PEG),通过双乳液溶剂挥发法制备了一系列具有不同表面性质的生物降解高分子微球.采用生物模拟矿化的方法以磷灰石修饰微球表面.进一步通过扫描电镜、热重分析仪、X-射线衍射仪和光电子能谱仪对微球表面磷灰石的形貌、含量、结构和组成进行了分析.研究了微球表面亲水性、粗糙度、官能团以及矿化时间对于磷灰石形成的影响.最终实验结果表明,随着共聚物中PEG含量增加,微球表面粗糙度和亲水性增加,因此微球表面磷灰石含量增加.同时微球表面官能团以及矿化时间的不同也会对磷灰石的形成和分布产生明显影响.     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间     

醇/水介质对PEG大分子单体与BMA分散共聚反应的影响

通过端基反应法合成了苯乙烯单封端的聚乙二醇(St- PEG)大分子单体,使其与甲基丙烯酸丁酯(BMA)在乙醇 水混合介质中进行分散共聚,得到了聚乙二醇接枝的聚甲基丙烯酸丁酯(PBMA- g -PEG)高分子微球.PBMA- g -PEG共聚物的亲溶剂 疏溶剂平衡将影响微球的形成,反应结束时,体系随BMA浓度和介质中水含量的变化呈现出4种不同的状态,透明清液、乳液、伴有沉淀或凝胶的乳液和凝胶.用透射电子显微镜(TEM)和激光光散射(LLS)对乳液体系的粒径及其形态进行了表征,表明所得接枝高分子微球形态规整具有较好的单分散性.通过控制介质中水的含量和BMA的浓度可得粒径在4 0～5 0 0nm范围的PBMA -g -PEG微球.     

Characterization of Fe3O4/P(St-MPEO) Amphiphilic Magnetic Polymer Microspheres

IntroductionMagnetic microspheres have been widely usedin many fields,such as targetdrug,cell separationand enzyme immunoassay,since the past twentyyears because of their relatively rapid and easymagnetic separation[1] .Although a poly(ethyleneoxide) supported- catalyst system with a solublepolymer as the carrier can easily keep the activityand the selectivity of the catalyst,its recovery hasto be performed by filtration or precipitation fromthe reaction medium,which is time- consuming andener…     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

白蛋白原位复合生物医用功能材料的研究(Ⅰ)──材料的合成和表面结构研究

采用大分子单体技术合成了以聚甲基丙烯酸甲酯为主链,聚氧乙烯链为侧链,末端为白蛋白诱导吸附基团的十八烷基功能聚合物聚甲基丙烯酸甲酯接枝十八烷基聚氧乙烯.采用变角X光电子能谱和表面接触角研究了该功能聚合物在空气和水界面的性质.结果表明,在聚合物-空气界面,十八烷基聚氧乙烯(SPEO)的表面含量随表面层厚度的降低而升高,并在表面发生高度富集.在聚合物-水界面,聚合物表面重组行为较弱,形成了高SPEO含量的疏水表面,该SPEO尾形结构表面预期可发挥聚氧乙烯和十八烷基的协同作用,形成白蛋白原位复合的生物医用功能材料.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. X. Preparation and properties of water-dispersible polyanionic microspheres having poly(methacrylic acid) branches on their surfaces

The free radical copolymerization of poly(t-butyl methacrylate) (PBMA) macromonomer with styrene in ethanol give monodispersed microspheres with 0.8-1.6 μm diameter. The resulting microspheres were treated with HCl solution to convert into anionic microspheres having poly(methacrylic acid) chains. ESCA analysis of the microsphere surface suggested that PBMA chains were favorably located on the surface of the microspheres. The particle size of the microspheres decreased with increasing molecular weight and concentration of the macromonomer. Water dispersibilities of the microspheres were evaluated by measuring the relative turbidity of the suspension of microspheres as a function of pH. The results show that they were strongly dependent on pH. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of magnetic poly(divinyl benzene)/Fe3O4, C/Fe3O4/Fe, and C/Fe onionlike fullerene micrometer-sized particles with a narrow size distribution

Magnetic poly(divinyl benzene)/Fe(3)O(4) microspheres with a narrow size distribution were produced by entrapping the iron pentacarbonyl precursor within the pores of uniform porous poly(divinyl benzene) microspheres prepared in our laboratory, followed by the decomposition in a sealed cell of the entrapped Fe(CO)(5) particles at 300 °C under an inert atmosphere. Magnetic onionlike fullerene microspheres with a narrow size distribution were produced by annealing the obtained PDVB/Fe(3)O(4) particles at 500, 600, 800, and 1100 °C, respectively, under an inert atmosphere. The formation of carbon graphitic layers at low temperatures such as 500 °C is unique and probably obtained because of the presence of the magnetic iron nanoparticles. The annealing temperature allowed control of the composition, size, size distribution, crystallinity, porosity, and magnetic properties of the produced magnetic microspheres.     

Block and star block copolymers by mechanism transformation X. Synthesis of poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) ABC miktoarm star copolymers by combination of RAFT and ROP

Poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) (MPEO/PSt/PLLA) ABC miktoarm star copolymers were synthesized by combination of reversible addition-fragmentation transfer (RAFT) polymerization and ring-opening polymerization (ROP) using bifunctional macro-transfer agent, MPEO with two terminal dithiobenzoate and hydroxyl groups. It was prepared by reaction of MPEO with maleic anhydride (MAh), subsequently reacted with dithiobenzoic acid and ethylene oxide. RAFT polymerization of St at 110 °C yielded block copolymer, MPEO-b-PSt [(MPEO)(PSt)CH₂OH], and then it was used to initiate the polymerization of l-lactide in the presence of Sn(OCt)₂ at 115 °C to produce ABC miktoarm star polymers, s-[(MPEO)(PSt)(PLLA)]. The structures of products obtained at each synthetic step were confirmed by NMR and gel permeation chromatography data.     

Synthesis and chiral micellization behavior of optically active amphiphilic diblock copolymer bearing quinine pendants

A novel optically active amphiphilic diblock copolymer bearing quinine pendants poly(ethylene oxide)‐b‐poly(glycidyl triazolyl‐L ‐quinine) (MPEO‐b‐PGTQ) was synthesized by “click” reaction of alkyne‐modified diblock copolymer poly(ethylene oxide)‐b‐poly(glycidyl propargyl ether) (MPEO‐b‐PGPE) and 9‐N₃‐quinine. The structure and composition of copolymers were characterized by gel permeation chromatography, ¹H nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis and optical rotation measurements, which showed that the synthetic route could provide the copolymer with well‐defined composition and with similar optical activity compared to its parent quinine. The micellization behavior of this chiral copolymer was investigated in different solvent systems. The results from fluorescence spectroscopy, UV spectroscopy, dynamic light scattering, transmission electron microscopy, ¹H NMR and circular dichroism (CD) spectroscopy indicated that the MPEO‐b‐PGTQ could form regular chiral spherical micelles in H₂O and Tetrahydrofuran‐H₂O (10:90, V/V) systems, and the state of aggregated chiral micelles depended on the nature of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3640–3650, 2009